ETSI EN 301 166-2 V1.2.3 (2009-11)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

REN/ERM-TGDMR-287-2

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Kopenske mobilne storitve - Radijska oprema za analogne oziroma digitalne komunikacije (prenos govora oziroma podatkov), ki deluje v ozkopasovnih kanalih in ima antenski konektor - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE

Pričujoči dokument velja za radio oddajnike in sprejemnike, uporabljene v postajah, ki se uporabljajo v zasebnih mobilnih radio storitvah (PMR). Uporablja se v kopenskih mobilnih storitvah, ki so sposobne delovati v vseh ali katerem koli frekvenčnem pasu, ki so našteti spodaj.
The present document applies to equipment operating with narrow channel separations (CSP) (less than 10 kHz) and intended for speech and/or data. It is the intention of the present document to cover any Channel BandWidths (CBW) permitted by National Administrations for such systems e.g. 6,25 kHz.
In the present document different requirements are given for the different radio frequency bands, environmental conditions and types of equipment where appropriate.
In the present document, data transmission systems are defined as systems which transmit and/or receive data and/or digitized voice. The equipment comprises a transmitter and associated encoder and modulator and/or a receiver and associated demodulator and decoder.
Pričujoči dokument velja za opremo, ki deluje z ločevanjem ozkopasovnih kanalov (CSP) (manj kot 10kHz), predvidenih za govor in/ali podatke. Namen pričujočega dokumenta je, da zajame vse kanale pasovne širine (CBW), ki so dovoljeni s strani državnih upravnih organov  za te sisteme, npr. 6,25 kHz.
V pričujočem dokumentu so podane različne zahteve za različne radiofrekvenčne pasove, okoljske razmere ter vrste opreme, kjer je to primerno.
V pričujočem dokumentu so sistemi za prenos podatkov opredeljeni kot sistemi, ki oddajajo in/ali sprejemajo podatke in/ali digitaliziran glas. Oprema vsebuje oddajnik in povezan kodirnik ter modulator in/ali sprejemnik ter povezan demodulator dekodirnik. Pričujoči dokument vključuje opremo, ki lahko uporablja modulacijo s konstantno ovojnico ali modulacijo z ne- konstantno ovojnico. Vrste opreme, ki jih pričujoči dokument vključuje, so  naslednje:
- bazna postaja: oprema, opremljena z antenskim konektorjem,
- mobilna postaja: oprema, opremljena z antenskim konektorjem.
- prenosne ročne postaje:
a) ali opremljena za antenskim konektorjem ali
b) brez zunanjega antenskega konektorja, vendar opremljena s stalnim ali začasnim notranjim 50 Ω RF konektorjem, ki dopušča dostop do izhoda oddajnika in vhoda sprejemnika.
Oprema prenosne ročne postaje brez zunanjega ali notranjega radio frekvenčnega (RF) konektorja in brez možnosti začasnega notranjega 50 Ω RF konektorja ni zajeta v pričujočem dokumentu. Pričujoči dokument je namenjen temu, da vključi določbe člena 3.2 Direktive 1999/5 EC [i.3] (R&TTE direktiva), ki navaja da »mora biti radijska oprema skonstruirana tako, da učinkovito uporablja spekter, razporejen za prizemne/vesoljske radijske komunikacije in orbitalne vire, tako da ne pride do škodljivega motenja.«  Poleg pričujočega dokumenta se lahko ostali EN-i, ki določajo tehnične zahteve v skladu s ključnimi zahtevami pod drugimi deli člena 3 Direktive R&TTE [i,3], lahko uporabljajo za opremo znotraj obsega pričujočega dokumenta.

General Information

• Status: Published
• Publication Date: 09-Aug-2010
• Technical Committee: ERM TGDMR - Digital Mobile Radio
• Current Stage: 12 - Completion
• Due Date: 18-Nov-2009
• Completion Date: 16-Nov-2009
• Mandate: M/284
• Ref Project: SIST EN 301 166-2 V1.2.3:2010 - Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land Mobile Service - Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector - Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 301 166-2 V1.2.3:2010
01-januar-2010
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
.RSHQVNHPRELOQHVWRULWYH5DGLMVNDRSUHPD]DDQDORJQHR]LURPDGLJLWDOQH
NRPXQLNDFLMHSUHQRVJRYRUDR]LURPDSRGDWNRYNLGHOXMHYR]NRSDVRYQLKNDQDOLK
LQLPDDQWHQVNLNRQHNWRUGHO+DUPRQL]LUDQL(1NL]DMHPDELVWYHQH]DKWHYH
þOHQDGLUHNWLYH
5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land Mobile Service
- Radio equipment for analogue and/or digital communication (speech and/or data) and
operating on narrow band channels and having an antenna connector - Part 2:
Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 166-2 Version 1.2.3
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.070.01 Mobilni servisi na splošno Mobile services in general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 166-2 V1.2.3:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 166-2 V1.2.3:2010

---------------------- Page: 2 ----------------------

SIST EN 301 166-2 V1.2.3:2010

ETSI EN 301 166-2 V1.2.3 (2009-11)
Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Land Mobile Service;
Radio equipment for analogue and/or digital
communication (speech and/or data) and operating on
narrow band channels and having an antenna connector;
Part 2: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive

---------------------- Page: 3 ----------------------

SIST EN 301 166-2 V1.2.3:2010
 2 ETSI EN 301 166-2 V1.2.3 (2009-11)



Reference
REN/ERM-TGDMR-287-2
Keywords
analogue, antenna, connector, data, digital,
mobile, PMR, radio, regulation, speech
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 166-2 V1.2.3:2010
 3 ETSI EN 301 166-2 V1.2.3 (2009-11)
Contents
Intellectual Property Rights . 5
Foreword . 5
Introduction . 5
1 Scope . 6
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Technical requirements . 8
4.1 Environmental profile . 8
4.2 Transmitter requirements . 8
4.2.1 Frequency error . 8
4.2.1.1 Definition . 8
4.2.1.2 Limit . 8
4.2.1.3 Conformance . 8
4.2.2 Maximum power (PX) (conducted) . 9
4.2.2.1 Definition . 9
4.2.2.2 Limit . 9
4.2.2.3 Conformance . 9
4.2.3 Maximum effective radiated power . 9
4.2.3.1 Definition . 9
4.2.3.2 Limit . 9
4.2.3.3 Conformance . 9
4.2.4 Adjacent and alternate channel power . 9
4.2.4.1 Definition . 9
4.2.4.2 Limit . 9
4.2.4.3 Conformance . 9
4.2.5 Unwanted emissions in the spurious domain . 9
4.2.5.1 Definition . 9
4.2.5.2 Limit . 9
4.2.5.3 Conformance . 9
4.2.6 Intermodulation attenuation . 10
4.2.6.1 Definition . 10
4.2.6.2 Limit . 10
4.2.6.3 Conformance . 10
4.2.7 Transient power . 10
4.2.7.1 Definition . 10
4.2.7.2 Limit . 10
4.2.7.3 Conformance . 10
4.2.8 Transmitter timeout timer . 10
4.2.8.1 Definition . 10
4.2.8.2 Limit . 10
4.2.8.3 Conformance . 10
4.3 Receiver requirements . 11
4.3.1 Maximum usable sensitivity . 11
4.3.1.1 Definition . 11
4.3.1.2 Limit . 11
4.3.1.3 Conformance . 11
4.3.2 Co-channel rejection . 11
4.3.2.1 Definition . 11
ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 166-2 V1.2.3:2010
 4 ETSI EN 301 166-2 V1.2.3 (2009-11)
4.3.2.2 Limit . 11
4.3.2.3 Conformance . 11
4.3.3 Adjacent channel selectivity . 11
4.3.3.1 Definition . 11
4.3.3.2 Limit . 11
4.3.3.3 Conformance . 11
4.3.4 Spurious response rejection . 12
4.3.4.1 Definition . 12
4.3.4.2 Limit . 12
4.3.4.3 Conformance . 12
4.3.5 Intermodulation response rejection . 12
4.3.5.1 Definition . 12
4.3.5.2 Limit . 12
4.3.5.3 Conformance . 12
4.3.6 Blocking or desensitization . 12
4.3.6.1 Definition . 12
4.3.6.2 Limit . 12
4.3.6.3 Conformance . 12
4.3.7 Spurious radiations . 12
4.3.7.1 Definition . 12
4.3.7.2 Limit . 13
4.3.7.3 Conformance . 13
5 Testing for compliance with technical requirements . 13
5.1 Environmental conditions for testing . 13
5.1.1 Normal and extreme test-conditions . 13
5.1.2 Test power source . 13
5.1.3 Choice of samples for the measurements . 13
5.2 Interpretation of the measurement results . 13
5.3 Essential test suites . 14
5.3.1 Frequency error . 14
5.3.2 Maximum power (PX) (conducted) . 14
5.3.3 Maximum effective radiated power . 14
5.3.4 Adjacent and alternate channel power . 14
5.3.5 Unwanted emissions in the spurious domain . 14
5.3.6 Intermodulation attenuation . 14
5.3.7 Transient power . 14
5.3.8 Receiver spurious radiations . 14
5.4 Other test suites . 14
5.4.1 Maximum usable sensitivity . 14
5.4.2 Co-channel rejection . 14
5.4.3 Adjacent channel selectivity . 15
5.4.4 Spurious response rejection . 15
5.4.5 Intermodulation response rejection . 15
5.4.6 Blocking or desensitization . 15
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT) . 16
Annex B (informative): The EN title in the official languages . 18
History . 19

ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 166-2 V1.2.3:2010
 5 ETSI EN 301 166-2 V1.2.3 (2009-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [i.3] of the European Parliament
and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive" [i.3]).
The present document is part 2 of a multi-part deliverable covering Land Mobile Service; Radio equipment for analogue
and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna
connector, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive".
Technical specifications relevant to Directive 1999/5/EC [i.3] are given in annex A.

National transposition dates
Date of latest announcement of this EN (doa): 28 February 2010
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 2010
Date of withdrawal of any conflicting National Standard (dow): 31 August 2011

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.3]. The
modular structure is shown in EG 201 399 [i.2].
ETSI

---------------------- Page: 7 ----------------------

SIST EN 301 166-2 V1.2.3:2010
 6 ETSI EN 301 166-2 V1.2.3 (2009-11)
1 Scope
The present document applies to radio transmitters and receivers used in stations in the Private Mobile Radio (PMR)
service. It applies to use in the land mobile service capable of operating in all or any part of the frequency bands given
below.
Table 1: Radiocommunications service frequency bands
Radiocommunications service frequency bands
Transmit 30 MHz to 3 000 MHz
Receive 30 MHz to 3 000 MHz

The present document applies to equipment operating with narrow channel separations (CSP) (less than 10 kHz) and
intended for speech and/or data. It is the intention of the present document to cover any Channel BandWidths (CBW)
permitted by National Administrations for such systems e.g. 6,25 kHz.
In the present document different requirements are given for the different radio frequency bands, environmental
conditions and types of equipment where appropriate.
In the present document, data transmission systems are defined as systems which transmit and/or receive data and/or
digitized voice. The equipment comprises a transmitter and associated encoder and modulator and/or a receiver and
associated demodulator and decoder.
The present document covers equipment which may use constant envelope or non-constant envelope modulation.
The types of equipment covered by the present document are as follows:
- base station: equipment fitted with antenna connector;
- mobile station: equipment fitted with antenna connector;
- handportable stations:
a) either fitted with an antenna connector; or
b) without an external antenna connector but fitted with a permanent internal or a temporary internal
50 Ω RF connector which allows access to the transmitter output and the receiver input.
Handportable station equipment without an external or internal Radio Frequency (RF) connector and without the
possibility of having a temporary internal 50 Ω RF connector is not covered by the present document.
The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [i.3] (R&TTE
Directive), which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated
to terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [i.3] may apply to equipment within the scope of the present
document.
ETSI

---------------------- Page: 8 ----------------------

SIST EN 301 166-2 V1.2.3:2010
 7 ETSI EN 301 166-2 V1.2.3 (2009-11)
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI EN 301 166-1 (V1.3.2): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or
data) and operating on narrow band channels and having an antenna connector; Part 1: Technical
characteristics and methods of measurement".
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] ETSI TR 100 028 (V1.4.1) (all parts): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Uncertainties in the measurement of mobile radio equipment characteristics".
[i.2] ETSI EG 201 399 (V2.1.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
A guide to the production of candidate Harmonized Standards for application under the R&TTE
Directive".
[i.3] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[i.4] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
ETSI

---------------------- Page: 9 ----------------------

SIST EN 301 166-2 V1.2.3:2010
 8 ETSI EN 301 166-2 V1.2.3 (2009-11)
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [i.3] and
EN 301 166-1 [1] apply.
3.2 Symbols
For the purposes of the present document, the symbols given in EN 301 166-1 [1] apply.
3.3 Abbreviations
For the purposes of the present document, the abbreviations given in EN 301 166-1 [1] apply.
4 Technical requirements
For equipment without an external antenna connector (integral antenna equipment) but fitted with a permanent internal
or a temporary internal 50 Ω RF connector which allows access to the transmitter output and the receiver input, the
following additional measurements are made using the equipment antenna connected to the station (and not using any
connector):
- transmitter effective radiated power;
- transmitter radiated spurious emissions;
- receiver maximum usable sensitivity (field strength);
- receiver spurious radiations.
4.1 Environmental profile
The technical requirements of the present document apply under the environmental profile for operation of the
...

ETSI EN 301 166-2 V1.2.3 (2009-11)
Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Land Mobile Service;
Radio equipment for analogue and/or digital
communication (speech and/or data) and operating on
narrow band channels and having an antenna connector;
Part 2: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive

---------------------- Page: 1 ----------------------
2 ETSI EN 301 166-2 V1.2.3 (2009-11)



Reference
REN/ERM-TGDMR-287-2
Keywords
analogue, antenna, connector, data, digital,
mobile, PMR, radio, regulation, speech
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 301 166-2 V1.2.3 (2009-11)
Contents
Intellectual Property Rights . 5
Foreword . 5
Introduction . 5
1 Scope . 6
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Technical requirements . 8
4.1 Environmental profile . 8
4.2 Transmitter requirements . 8
4.2.1 Frequency error . 8
4.2.1.1 Definition . 8
4.2.1.2 Limit . 8
4.2.1.3 Conformance . 8
4.2.2 Maximum power (PX) (conducted) . 9
4.2.2.1 Definition . 9
4.2.2.2 Limit . 9
4.2.2.3 Conformance . 9
4.2.3 Maximum effective radiated power . 9
4.2.3.1 Definition . 9
4.2.3.2 Limit . 9
4.2.3.3 Conformance . 9
4.2.4 Adjacent and alternate channel power . 9
4.2.4.1 Definition . 9
4.2.4.2 Limit . 9
4.2.4.3 Conformance . 9
4.2.5 Unwanted emissions in the spurious domain . 9
4.2.5.1 Definition . 9
4.2.5.2 Limit . 9
4.2.5.3 Conformance . 9
4.2.6 Intermodulation attenuation . 10
4.2.6.1 Definition . 10
4.2.6.2 Limit . 10
4.2.6.3 Conformance . 10
4.2.7 Transient power . 10
4.2.7.1 Definition . 10
4.2.7.2 Limit . 10
4.2.7.3 Conformance . 10
4.2.8 Transmitter timeout timer . 10
4.2.8.1 Definition . 10
4.2.8.2 Limit . 10
4.2.8.3 Conformance . 10
4.3 Receiver requirements . 11
4.3.1 Maximum usable sensitivity . 11
4.3.1.1 Definition . 11
4.3.1.2 Limit . 11
4.3.1.3 Conformance . 11
4.3.2 Co-channel rejection . 11
4.3.2.1 Definition . 11
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 301 166-2 V1.2.3 (2009-11)
4.3.2.2 Limit . 11
4.3.2.3 Conformance . 11
4.3.3 Adjacent channel selectivity . 11
4.3.3.1 Definition . 11
4.3.3.2 Limit . 11
4.3.3.3 Conformance . 11
4.3.4 Spurious response rejection . 12
4.3.4.1 Definition . 12
4.3.4.2 Limit . 12
4.3.4.3 Conformance . 12
4.3.5 Intermodulation response rejection . 12
4.3.5.1 Definition . 12
4.3.5.2 Limit . 12
4.3.5.3 Conformance . 12
4.3.6 Blocking or desensitization . 12
4.3.6.1 Definition . 12
4.3.6.2 Limit . 12
4.3.6.3 Conformance . 12
4.3.7 Spurious radiations . 12
4.3.7.1 Definition . 12
4.3.7.2 Limit . 13
4.3.7.3 Conformance . 13
5 Testing for compliance with technical requirements . 13
5.1 Environmental conditions for testing . 13
5.1.1 Normal and extreme test-conditions . 13
5.1.2 Test power source . 13
5.1.3 Choice of samples for the measurements . 13
5.2 Interpretation of the measurement results . 13
5.3 Essential test suites . 14
5.3.1 Frequency error . 14
5.3.2 Maximum power (PX) (conducted) . 14
5.3.3 Maximum effective radiated power . 14
5.3.4 Adjacent and alternate channel power . 14
5.3.5 Unwanted emissions in the spurious domain . 14
5.3.6 Intermodulation attenuation . 14
5.3.7 Transient power . 14
5.3.8 Receiver spurious radiations . 14
5.4 Other test suites . 14
5.4.1 Maximum usable sensitivity . 14
5.4.2 Co-channel rejection . 14
5.4.3 Adjacent channel selectivity . 15
5.4.4 Spurious response rejection . 15
5.4.5 Intermodulation response rejection . 15
5.4.6 Blocking or desensitization . 15
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT) . 16
Annex B (informative): The EN title in the official languages . 18
History . 19

ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 301 166-2 V1.2.3 (2009-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [i.3] of the European Parliament
and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive" [i.3]).
The present document is part 2 of a multi-part deliverable covering Land Mobile Service; Radio equipment for analogue
and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna
connector, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive".
Technical specifications relevant to Directive 1999/5/EC [i.3] are given in annex A.

National transposition dates
Date of latest announcement of this EN (doa): 28 February 2010
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 2010
Date of withdrawal of any conflicting National Standard (dow): 31 August 2011

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.3]. The
modular structure is shown in EG 201 399 [i.2].
ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 301 166-2 V1.2.3 (2009-11)
1 Scope
The present document applies to radio transmitters and receivers used in stations in the Private Mobile Radio (PMR)
service. It applies to use in the land mobile service capable of operating in all or any part of the frequency bands given
below.
Table 1: Radiocommunications service frequency bands
Radiocommunications service frequency bands
Transmit 30 MHz to 3 000 MHz
Receive 30 MHz to 3 000 MHz

The present document applies to equipment operating with narrow channel separations (CSP) (less than 10 kHz) and
intended for speech and/or data. It is the intention of the present document to cover any Channel BandWidths (CBW)
permitted by National Administrations for such systems e.g. 6,25 kHz.
In the present document different requirements are given for the different radio frequency bands, environmental
conditions and types of equipment where appropriate.
In the present document, data transmission systems are defined as systems which transmit and/or receive data and/or
digitized voice. The equipment comprises a transmitter and associated encoder and modulator and/or a receiver and
associated demodulator and decoder.
The present document covers equipment which may use constant envelope or non-constant envelope modulation.
The types of equipment covered by the present document are as follows:
- base station: equipment fitted with antenna connector;
- mobile station: equipment fitted with antenna connector;
- handportable stations:
a) either fitted with an antenna connector; or
b) without an external antenna connector but fitted with a permanent internal or a temporary internal
50 Ω RF connector which allows access to the transmitter output and the receiver input.
Handportable station equipment without an external or internal Radio Frequency (RF) connector and without the
possibility of having a temporary internal 50 Ω RF connector is not covered by the present document.
The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [i.3] (R&TTE
Directive), which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated
to terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [i.3] may apply to equipment within the scope of the present
document.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI EN 301 166-2 V1.2.3 (2009-11)
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI EN 301 166-1 (V1.3.2): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or
data) and operating on narrow band channels and having an antenna connector; Part 1: Technical
characteristics and methods of measurement".
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] ETSI TR 100 028 (V1.4.1) (all parts): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Uncertainties in the measurement of mobile radio equipment characteristics".
[i.2] ETSI EG 201 399 (V2.1.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
A guide to the production of candidate Harmonized Standards for application under the R&TTE
Directive".
[i.3] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[i.4] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
ETSI

---------------------- Page: 7 ----------------------
8 ETSI EN 301 166-2 V1.2.3 (2009-11)
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [i.3] and
EN 301 166-1 [1] apply.
3.2 Symbols
For the purposes of the present document, the symbols given in EN 301 166-1 [1] apply.
3.3 Abbreviations
For the purposes of the present document, the abbreviations given in EN 301 166-1 [1] apply.
4 Technical requirements
For equipment without an external antenna connector (integral antenna equipment) but fitted with a permanent internal
or a temporary internal 50 Ω RF connector which allows access to the transmitter output and the receiver input, the
following additional measurements are made using the equipment antenna connected to the station (and not using any
connector):
- transmitter effective radiated power;
- transmitter radiated spurious emissions;
- receiver maximum usable sensitivity (field strength);
- receiver spurious radiations.
4.1 Environmental profile
The technical requirements of the present document apply under the environmental profile for operation of the
equipment, which shall be declared by the manufacturer. The equipment shall comply with all the technical
requirements of the present document at all times when operating within the boundary limits of the declared operational
environmental profile.
4.2 Transmitter requirements
4.2.1 Frequency error
4.2.1.1 Definition
The frequency error is defined in EN 301 166-1 [1], clause 7.7.1.
4.2.1.2 Limit
The frequency error shall not exceed the limits in EN 301 166-1 [1], clause 7.7.3.
4.2.1.3 Conformance
If the transmitter adjacent and alternate channels power (clause 5.3.4) has not been measured under extreme test
conditions, then the conformance tests as defined in clause 5.3.1 shall be carried out.
ETSI

---------------------- Page: 8 ----------------------
9 ETSI EN 301 166-2 V1.2.3 (2009-11)
4.2.2 Maximum power (PX) (conducted)
4.2.2.1 Definition
The maximum power (conducted) is defined in EN 301 166-1 [1], clause 7.1.1.
4.2.2.2 Limit
The maximum power (conducted) shall not exceed the limits in EN 301 166-1 [1], clause 7.1.3.
4.2.2.3 Conformance
Conformance tests as defined in clause 5.3.2 shall be carried out.
4.2.3 Maximum effective radiated power
4.2.3.1 Definition
The maximum effective radiated power is defined in EN 301 166-1 [1], clause 7.2.1.
4.2.3.2 Limit
The maximum effective radiated power shall not exceed the limits in EN 301 166-1 [1], clause 7.2.3.
4.2.3.3 Conformance
Conformance tests as defined in clause 5.3.3 shall be carried out.
4.2.4 Adjacent and alternate channel power
4.2.4.1 Definition
The adjacent channel power is defined in EN 3
...