ETSI EN 300 676-2 V1.4.1 (2010-04)
Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
REN/ERM-JTFEA-001-2
Talni VHF ročni, mobilni in fiksni radijski oddajniki, sprejemniki in sprejemniki-oddajniki za VHF aeronavtično mobilno storitev, ki uporablja amplitudno modulacijo - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE
Pričujoči dokument velja za DSB AM talne bazne postaje, z medkanalskimi razmiki 8,33 kHz ali 25 kHz, namenjene za analogni govor ali namenjene za ACARS podatkovno komunikacijo. Obseg pričujočega dokumenta je omejen na talne bazne postaje, talne mobilne in ročne radie za talno uporabo. Ti tipi radijske opreme so zmožni delovanja v vseh ali kateremkoli delu aeronavtičnega frekvenčnega pasu med 118 in 136,975 MHz. Pričujoči dokument je namenjen temu, da pokriva določbe Direktive 1999/5/ES [i.1] (direktive R&TTE), člena 3.2, ki navaja, da »/…/ radijska oprema je narejena tako, da učinkovito izrablja spekter, razporejen za prizemne/vesoljske radiokomunikacije in orbitalne vire, tako da ne pride do škodljivega motenja«. Poleg pričujočega dokumenta se ostali EN, ki določajo tehnične zahteve v skladu z bistvenimi zahtevami v drugih delih člena 3 direktive R&TTE, kot tudi bistvene zahteve iz Uredbe o medobratovalnosti na enotnem evropskem nebu (kakor je bila spremenjena) [i.2], ter ustrezna pravila za izvedbo lahko uporabljajo za opremo znotraj področja uporabe pričujočega dokumenta.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LWXGQR'LUHFWLYH49.090On-board equipment and instruments33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 300 676-2 Version 1.4.1SIST EN 300 676-2 V1.4.1:2010en01-julij-2010SIST EN 300 676-2 V1.4.1:2010SLOVENSKI
STANDARD
SIST EN 300 676-2 V1.4.1:2010
ETSI EN 300 676-2 V1.4.1 (2010-04)Harmonized European Standard (Telecommunications series) Ground-based VHF hand-held, mobile andfixed radio transmitters, receivers andtransceivers for the VHF aeronautical mobile serviceusing amplitude modulation;Part 2: Harmonized EN covering essential requirementsof article 3.2 of the R&TTE Directive SIST EN 300 676-2 V1.4.1:2010
ETSI ETSI EN 300 676-2 V1.4.1 (2010-04) 2
Reference REN/ERM-JTFEA-001-2 Keywords aeronautical, AM, DSB, radio, testing, VHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2010. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE™ is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 300 676-2 V1.4.1:2010
ETSI ETSI EN 300 676-2 V1.4.1 (2010-04) 3 Contents Intellectual Property Rights . 5 Foreword . 5 Introduction . 5 1 Scope . 6 2 References . 6 2.1 Normative references . 6 2.2 Informative references . 7 3 Definitions and abbreviations . 7 3.1 Definitions . 7 3.2 Abbreviations . 8 4 Technical requirements specifications . 8 4.1 Environmental profile . 8 4.2 Conformance requirements . 8 4.2.1 Transmitter requirements . 8 4.2.1.1 Frequency error . 8 4.2.1.2 Carrier power (conducted) . 8 4.2.1.3 Adjacent channel power . 8 4.2.1.4 Conducted spurious emissions . 8 4.2.1.5 Intermodulation attenuation (Applicable to Base stations only) . 8 4.2.1.6 Keying transient frequency behaviour (Applicable to base stations only) . 9 4.2.2 Receiver requirements . 9 4.2.2.1 Sensitivity . 9 4.2.2.2 Adjacent channel rejection . 9 4.2.2.3 Spurious response rejection . 9 4.2.2.4 Intermodulation response rejection . 9 4.2.2.5 Blocking or desensitisation . 9 4.2.2.6 Conducted spurious emissions . 9 4.2.2.7 Cross modulation rejection . 9 5 Testing for compliance with technical requirements . 9 5.1 Environmental conditions for testing . 9 5.2 Interpretation of the measurement results . 10 5.3 Essential radio test suites . 10 5.3.1 Transmitter test specifications . 10 5.3.1.1 Frequency error . 10 5.3.1.2 Carrier power (conducted) . 10 5.3.1.3 Adjacent channel power . 11 5.3.1.4 Conducted spurious emissions . 11 5.3.1.5 Intermodulation attenuation . 11 5.3.1.6 Keying transient frequency behaviour . 11 5.3.2 Receiver test specifications . 11 5.3.2.1 Sensitivity . 11 5.3.2.2 Adjacent channel rejection . 11 5.3.2.3 Spurious response rejection . 11 5.3.2.4 Intermodulation response rejection . 11 5.3.2.5 Blocking or desensitisation . 11 5.3.2.6 Conducted spurious emissions . 11 5.3.2.7 Cross modulation rejection . 11 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 12 Annex B (informative): The EN title in the official languages . 14 SIST EN 300 676-2 V1.4.1:2010
ETSI ETSI EN 300 676-2 V1.4.1 (2010-04) 4 Annex C (informative): Bibliography . 15 History . 16
SIST EN 300 676-2 V1.4.1:2010
ETSI ETSI EN 300 676-2 V1.4.1 (2010-04) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document is part 2 of a multi-part deliverable covering the Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; as identified below: Part 1: "Technical characteristics and methods of measurement"; Part 2: "Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive".
National transposition dates Date of adoption of this EN: 3 April 2010 Date of latest announcement of this EN (doa): 31 July 2010 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 January 2011 Date of withdrawal of any conflicting National Standard (dow): 31 January 2012
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular structure is shown in EG 201 399 [i.3].
SIST EN 300 676-2 V1.4.1:2010
ETSI ETSI EN 300 676-2 V1.4.1 (2010-04) 6 1 Scope The present document applies to DSB AM ground base stations, with channel separations of 8,33 kHz or 25 kHz intended for analogue speech or intended for ACARS data communication. The scope of the present document is limited to ground based stations, ground mobile and hand-held radios for ground use.These radio equipment types are capable of operating in all or any part of the aeronautical frequency band between 118 MHz and 136,975 MHz. The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive), article 3.2, which states that ". radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive as well as essential requirements under the Single European Sky Interoperability Regulation (as amended) [i.2] and related implementing rules may apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the web site http://www.newapproach.org. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • Non-specific reference may be made only to a complete document or a part thereof and only in the following cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document;
- for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. [1] ETSI EN 300 676-1 (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 1: Technical characteristics and methods of measurement". [2] ETSI EN 300 113-1 (V1.6.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Part 1: Technical characteristics and methods of measurement". [3] ETSI TR 100 028 (all parts) (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics". SIST EN 300 676-2 V1.4.1:2010
ETSI ETSI EN 300 676-2 V1.4.1 (2010-04) 7 2.2 Informative references The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. [i.1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and th
...
Final draft EN 300 676-2 V1.4.1 (2009-12)
Harmonized European Standard (Telecommunications series)
Ground-based VHF hand-held, mobile and
fixed radio transmitters, receivers and
transceivers for the VHF aeronautical mobile service
using amplitude modulation;
Part 2: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 Final draft EN 300 676-2 V1.4.1 (2009-12)
Reference
REN/ERM-JTFEA-001-2
Keywords
aeronautical, AM, DSB, radio, testing, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft EN 300 676-2 V1.4.1 (2009-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definitions and abbreviations . 7
3.1 Definitions . 7
3.2 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Conformance requirements . 8
4.2.1 Transmitter requirements . 8
4.2.1.1 Frequency error . 8
4.2.1.2 Carrier power (conducted) . 8
4.2.1.3 Adjacent channel power . 8
4.2.1.4 Conducted spurious emissions . 8
4.2.1.5 Intermodulation attenuation (Applicable to Base stations only) . 8
4.2.1.6 Keying transient frequency behaviour (Applicable to base stations only) . 8
4.2.2 Receiver requirements . 9
4.2.2.1 Sensitivity . 9
4.2.2.2 Adjacent channel rejection . 9
4.2.2.3 Spurious response rejection . 9
4.2.2.4 Intermodulation response rejection . 9
4.2.2.5 Blocking or desensitisation . 9
4.2.2.6 Conducted spurious emissions . 9
4.2.2.7 Cross modulation rejection . 9
5 Testing for compliance with technical requirements . 9
5.1 Environmental conditions for testing . 9
5.2 Interpretation of the measurement results . 9
5.3 Essential radio test suites . 10
5.3.1 Transmitter test specifications . 10
5.3.1.1 Frequency error . 10
5.3.1.2 Carrier power (conducted) . 10
5.3.1.3 Adjacent channel power . 10
5.3.1.4 Conducted spurious emissions . 10
5.3.1.5 Intermodulation attenuation . 11
5.3.1.6 Keying transient frequency behaviour . 11
5.3.1.7 Cabinet Radiation . 11
5.3.2 Receiver test specifications . 11
5.3.2.1 Sensitivity . 11
5.3.2.2 Adjacent channel rejection . 11
5.3.2.3 Spurious response rejection . 11
5.3.2.4 Intermodulation response rejection . 11
5.3.2.5 Blocking or desensitisation . 11
5.3.2.6 Conducted spurious emissions . 11
5.3.2.7 Cross modulation rejection . 11
5.3.2.8 Cabinet radiation . 11
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 12
ETSI
---------------------- Page: 3 ----------------------
4 Final draft EN 300 676-2 V1.4.1 (2009-12)
Annex B (informative): The EN title in the official languages . 15
Annex C (informative): Bibliography . 16
History . 17
ETSI
---------------------- Page: 4 ----------------------
5 Final draft EN 300 676-2 V1.4.1 (2009-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the ETSI standards
One-step Approval Procedure.
The present document is part 2 of a multi-part deliverable covering the Ground-based VHF hand-held, mobile and fixed
radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; as
identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive".
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 [i.3].
ETSI
---------------------- Page: 5 ----------------------
6 Final draft EN 300 676-2 V1.4.1 (2009-12)
1 Scope
The present document applies to DSB AM ground base stations, with channel separations of 8,33 kHz or 25 kHz
intended for analogue speech intended for ACARS data communication. The scope of the present document is limited
to ground based stations, ground mobile and hand held radios for ground use.These radio equipment types are capable
of operating in all or any part of the Aeronautical frequency band- between 118°MHz and 136,975°MHz.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive), article 3.2,
which states that ". radio equipment shall be so constructed that it effectively (and efficiently) uses the spectrum
allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference”.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive as well as essential requirements under the Single European Sky
Interoperability Regulation (as amended) [i.2] and related implementing rules may apply to equipment within the scope
of the present document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.}
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI EN 300 676-1 (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for
the VHF aeronautical mobile service using amplitude modulation; Part 1: Technical characteristics
and methods of measurement".
[2] ETSI EN 300 113-1 (V1.6.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using
constant or non-constant envelope modulation and having an antenna connector; Part 1: Technical
characteristics and methods of measurement".
[3] ETSI TR 100 028 (all parts) (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Uncertainties in the measurement of mobile radio equipment characteristics".
ETSI
---------------------- Page: 6 ----------------------
7 Final draft EN 300 676-2 V1.4.1 (2009-12)
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity.
[i.2] Regulation (EC) 552/2004 of the European
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.