Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2-2: Harmonized EN covering essential requirements of Article 3.2 of R&TTE Directive for digital systems operating in frequency bands where frequency co-ordination is applied

REN/TM-04167-2-2

Fiksni radijski sistemi - Karakteristike in zahteve za opremo in antene tipa točka-točka - 2-2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE za digitalne sisteme, ki delujejo v frekvenčnih pasovih, kjer je izvedena frekvenčna koordinacija

General Information

Status
Published
Publication Date
02-Jun-2008
Current Stage
12 - Completion
Due Date
17-Aug-2007
Completion Date
04-Sep-2007
Mandate

Relations

Buy Standard

Standard
EN 302 217-2-2 V1.2.3:2008
English language
89 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 302 217-2-2 V1.2.3:2008
01-marec-2008
)LNVQLUDGLMVNLVLVWHPL.DUDNWHULVWLNHLQ]DKWHYH]DRSUHPRLQDQWHQHWLSDWRþND
WRþNDGHO+DUPRQL]LUDQL(1NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH
5 77(]DGLJLWDOQHVLVWHPHNLGHOXMHMRYIUHNYHQþQLKSDVRYLKNMHUMHL]YHGHQD
IUHNYHQþQDNRRUGLQDFLMD
Fixed Radio Systems - Characteristics and requirements for point-to-point equipment
and antennas - Part 2-2: Harmonized EN covering essential requirements of Article 3.2
of R&TTE Directive for digital systems operating in frequency bands where frequency co-
ordination is applied
Ta slovenski standard je istoveten z: EN 302 217-2-2 Version 1.2.3
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
33.120.40 Antene Aerials
SIST EN 302 217-2-2 V1.2.3:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 302 217-2-2 V1.2.3:2008

---------------------- Page: 2 ----------------------

SIST EN 302 217-2-2 V1.2.3:2008

ETSI EN 302 217-2-2 V1.2.3 (2007-09)
Harmonized European Standard (Telecommunications series)

Fixed Radio Systems;
Characteristics and requirements for
point-to-point equipment and antennas;
Part 2-2: Harmonized EN covering essential requirements of
Article 3.2 of R&TTE Directive for digital systems operating in
frequency bands where frequency co-ordination is applied

---------------------- Page: 3 ----------------------

SIST EN 302 217-2-2 V1.2.3:2008
 2 ETSI EN 302 217-2-2 V1.2.3 (2007-09)



Reference
REN/TM-04167-2-2
Keywords
antenna, DFRS, digital, DRRS, FWA,
point-to-point, radio, regulation, transmission
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2007.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 302 217-2-2 V1.2.3:2008
 3 ETSI EN 302 217-2-2 V1.2.3 (2007-09)
Contents
Intellectual Property Rights.7
Foreword.7
Introduction .8
1 Scope.9
1.1 General background.9
1.2 Spectral efficiency classes.9
1.3 System alternatives.10
1.4 Channel arrangements and utilization .10
1.5 Payload flexibility.10
1.6 Document structure.11
2 References.12
3 Definitions, symbols and abbreviations .13
3.1 Definitions.13
3.2 Symbols.13
3.3 Abbreviations.13
4 Technical requirements specifications .13
4.1 Environmental profile.14
4.2 Transmitter requirements.14
4.2.1 Transmitter power.14
4.2.2 Transmitter power and frequency control.14
4.2.2.1 Transmitter Power Control (ATPC and RTPC) .14
4.2.2.1.1 Automatic Transmit Power Control (ATPC).15
4.2.2.1.2 Remote Transmit Power Control (RTPC) .15
4.2.2.2 Remote Frequency Control (RFC) .15
4.2.3 Transmitter power tolerance .15
4.2.4 Radio Frequency (RF) spectrum mask.15
4.2.4.1 Limits background.15
4.2.4.2 Limits.18
4.2.5 Discrete CW components exceeding the spectrum mask limit .19
4.2.5.1 Discrete CW components at the symbol rate .19
4.2.5.2 Other discrete CW components exceeding the spectrum mask limit .19
4.2.6 Spurious emissions - external .20
4.2.7 Dynamic Change of Modulation Order .20
4.2.8 Radio frequency tolerance .21
4.3 Receiver requirements.21
4.3.1 Spurious emissions - external .21
4.3.2 BER as a function of receiver input signal level RSL .21
4.3.3 Co-channel "external" and adjacent channel interference sensitivity .22
4.3.4 CW spurious interference .22
4.4 Antenna directional requirements.22
4.4.1 Radiation Pattern Envelope (Off-axis EIRP density).23
4.4.2 Antenna gain.23
4.4.3 Antenna Cross-Polar Discrimination (XPD).23
5 Testing for compliance with technical requirements.23
5.1 Environmental conditions for testing .23
5.2 Essential radio test suites for the transmitter .24
5.2.1 Transmitter power.25
5.2.2 Transmitter power and frequency control.25
5.2.2.1 Transmitter Power Control (ATPC and RTPC) .25
5.2.2.1.1 ATPC.25
5.2.2.1.2 RTPC.26
5.2.2.1.3 Remote Frequency Control (RFC).26
5.2.3 Transmitter power tolerance .26
ETSI

---------------------- Page: 5 ----------------------

SIST EN 302 217-2-2 V1.2.3:2008
 4 ETSI EN 302 217-2-2 V1.2.3 (2007-09)
5.2.4 RF spectrum mask.26
5.2.5 Discrete CW components exceeding the spectrum mask limit .26
5.2.6 Spurious emissions - external .26
5.2.7 Dynamic Change of Modulation Order .27
5.2.8 Radio frequency tolerance .27
5.3 Essential radio test suites for the receiver .27
5.3.1 Spurious emissions - external .28
5.3.2 BER as a function of receiver input signal level (RSL).28
5.3.3 Co-channel "external" and adjacent channel interference sensitivity .28
5.3.4 CW spurious interference .29
5.4 Additional essential antenna test suites for systems with integral antenna.29
5.4.1 Radiation Pattern Envelope (Off-axis EIRP density).29
5.4.2 Antenna gain.29
5.4.3 Antenna Cross-Polar Discrimination (XPD).29
Annex A (normative): Frequency bands from 1,4 GHz to 2,7 GHz .30
A.1 Introduction.30
A.2 General characteristics .30
A.2.1 Frequency characteristics and channel arrangements.30
A.2.2 Transmission capacities.31
A.3 Transmitter.31
A.3.1 General requirements.31
A.3.2 Spectrum mask.32
A.4 Receiver.32
A.4.1 General requirements.32
A.4.2 BER as a function of receiver input signal level (RSL) .33
A.4.3 Co-channel "external" and adjacent channels interference sensitivity .33
Annex B (normative): Frequency bands from 3 GHz to 11 GHz (channel separation up to
30 MHz and 56/60 MHz) .35
B.1 Introduction.35
B.2 General characteristics .35
B.2.1 Frequency characteristics and channel arrangements.35
B.2.2 Transmission capacities.37
B.3 Transmitter.39
B.3.1 General requirements.39
B.3.2 RF spectrum masks.39
B.4 Receiver.42
B.4.1 General requirements.42
B.4.2 BER as a function of Receiver input Signal Level (RSL) .42
B.4.3 Co-channel "external" and adjacent channel interference sensitivity.43
Annex C (normative): Frequency bands from 3 GHz to 11 GHz (channel separation
40 MHz) .45
C.1 Introduction.45
C.2 General characteristics .45
C.2.1 Frequency characteristics and channel arrangements.45
C.2.2 Transmission capacities.46
C.3 Transmitter.46
C.3.1 General requirements.46
C.3.2 RF spectrum masks.46
C.4 Receiver.47
C.4.1 General requirements.47
C.4.2 BER as a function of Receiver input Signal Level (RSL) .48
ETSI

---------------------- Page: 6 ----------------------

SIST EN 302 217-2-2 V1.2.3:2008
 5 ETSI EN 302 217-2-2 V1.2.3 (2007-09)
C.4.3 Co-channel "external" and adjacent channel interference sensitivity.48
Annex D (normative): Frequency bands 13 GHz, 15 GHz and 18 GHz.49
D.1 Introduction.49
D.2 General characteristics .49
D.2.1 Frequency characteristics and channel arrangements.49
D.2.2 Transmission capacities.50
D.3 Transmitter.52
D.3.1 General requirements.52
D.3.2 RF spectrum masks.52
D.4 Receiver.55
D.4.1 General requirements.55
D.4.2 BER as a function of Receiver input Signal Level (RSL) .55
D.4.3 Co-channel "external" and adjacent channel interference sensitivity.57
Annex E (normative): Frequency bands from 23 GHz to 55 GHz .58
E.1 Introduction.58
E.2 General characteristics .58
E.2.1 Frequency characteristics and channel arrangements.58
E.2.2 Transmission capacities.59
E.3 Transmitter .61
E.3.1 General requirements.61
E.3.2 RF spectrum masks.61
E.3.2.1 Systems E.1, E.2, E.3 and E.4.62
E.3.2.2 Systems E.5, E.6 and E.7.64
E.4 Receiver.65
E.4.1 General requirements.65
E.4.2 BER as a function of Receiver input Signal Level (RSL) .65
E.4.2.1 Systems E.1, E.2, E.3 and E.4.66
E.4.2.2 Systems E.7, E.5 and E.6.67
E.4.3 Co-channel "external" and adjacent channel interference sensitivity.68
Annex F (normative): Transmission of packet data and combinations of other signals in
bands from 3 GHz to 55 GHz .69
F.1 Introduction.69
F.2 General characteristics .69
F.2.1 Frequency characteristics and channel arrangements.69
F.2.2 Transmission capacities.69
F.3 System parameters.70
F.3.1 Transmitter.70
F.3.2 Receiver.70
F.3.3 FER as a function of BER .70
Annex G (normative): Test report in relation to flexible systems applications .71
G.1 Wide radio-frequency band covering units .71
G.2 Multirate/multiformat equipment .73
G.3 BER measurement in a SDH multi-interface, multi-carrier system .73
G.3.1 Case 1: multi-interface 2 × STM-1/single carrier or multi-interface, 4 × STM-1/two-carrier systems
where each STM-1 payload is transmitted on one carrier only .73
G.3.2 Case 2: single interface, STM-4/two-carrier system .73
G.3.3 Case 3: multi-interface 4 × STM-1/two-carrier system where each STM-1 payload is transmitted on
both carriers.74
ETSI

---------------------- Page: 7 ----------------------

SIST EN 302 217-2-2 V1.2.3:2008
 6 ETSI EN 302 217-2-2 V1.2.3 (2007-09)
Annex H (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).75
Annex I (informative): Spectrum mask requirements when ATPC and/or RTPC are
implemented and mixed-mode operation is concerned .77
I.1 ATPC impact.77
I.2 RTPC Impact.78
I.3 Mixed-mode operation impact .78
I.3.1 Basic concepts.78
I.3.2 Implications on frequency co-ordination and possible regulatory background (licensing and fee) .79
I.3.3 Impact on article 3.2 "essential" parameters and operating conditions .80
Annex J (informative): Typical interference sensitivity behaviour for frequency planning
purpose.83
Annex K (informative): The EN title in the official languages .84
Annex L (informative): Bibliography.86
History .89

ETSI

---------------------- Page: 8 ----------------------

SIST EN 302 217-2-2 V1.2.3:2008
 7 ETSI EN 302 217-2-2 V1.2.3 (2007-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunica
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.