Transmitting equipment for the Digital Audio Broadcasting (DAB) service; Harmonised Standard for access to radio spectrum

REN/ERM-TG17-015

Oddajniška oprema za storitev digitalne zvokovne radiodifuzije (DAB) - Harmonizirani standard za dostop do radijskega spektra

Ta dokument določa tehnične lastnosti in metode merjenja za oddajniško opremo za zvokovne radiodifuzijske storitve, ki uporablja sistem modulacije digitalne zvokovne radiodifuzije (DAB) v pasu VHF III (174 MHz do 240 MHz).
Ta dokument zajema bistvene zahteve člena 3.2 Direktive 2014/53/EU [i.1] pod pogoji iz dodatka A.
OPOMBA: Razmerje med tem dokumentom in bistvenimi zahtevami člena 3.2 Direktive 2014/53/EU [i.1] je podano v dodatku A.

General Information

Status
Published
Publication Date
11-Jun-2018
Current Stage
12 - Completion
Due Date
18-Jun-2018
Completion Date
12-Jun-2018
Mandate

Buy Standard

Standard
EN 302 077 V2.1.1:2018
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETSI EN 302 077 V2.1.1 (2018-06) - Transmitting equipment for the Digital Audio Broadcasting (DAB) service; Harmonised Standard for access to radio spectrum
English language
39 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 302 077 V2.1.0 (2018-03) - Transmitting equipment for the Digital Audio Broadcasting (DAB) service; Harmonised Standard for access to radio spectrum
English language
39 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oddajniška oprema za storitev digitalne zvokovne radiodifuzije (DAB) - Harmonizirani standard za dostop do radijskega spektraTransmitting equipment for the Digital Audio Broadcasting (DAB) service - Harmonised Standard for access to radio spectrum33.170Televizijska in radijska difuzijaTelevision and radio broadcasting33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:ETSI EN 302 077 V2.1.1 (2018-06)SIST EN 302 077 V2.1.1:2018en01-september-2018SIST EN 302 077 V2.1.1:2018SLOVENSKI
STANDARD



SIST EN 302 077 V2.1.1:2018



ETSI EN 302 077 V2.1.1 (2018-06) Transmitting equipment for the Digital Audio Broadcasting (DAB) service; Harmonised Standard for access to radio spectrum
HARMONISED EUROPEAN STANDARD SIST EN 302 077 V2.1.1:2018



ETSI ETSI EN 302 077 V2.1.1 (2018-06) 2
Reference REN/ERM-TG17-015 Keywords audio, broadcasting, DAB, digital, harmonised standard, radio, regulation ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETM are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM® and the GSM logo are trademarks registered and owned by the GSM Association. SIST EN 302 077 V2.1.1:2018



ETSI ETSI EN 302 077 V2.1.1 (2018-06) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Modal verbs terminology . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 7 3 Definitions, symbols and abbreviations . 8 3.1 Definitions . 8 3.2 Symbols . 9 3.3 Abbreviations . 9 4 Technical requirements specifications . 10 4.1 Environmental profile . 10 4.2 Conformance requirements . 10 4.2.1 Rated output power accuracy . 10 4.2.1.1 Definition . 10 4.2.1.2 Limit . 10 4.2.1.3 Conformance . 10 4.2.2 Frequency stability . 10 4.2.2.1 Definition . 10 4.2.2.2 Limit . 11 4.2.2.3 Conformance . 11 4.2.3 Crest factor. 11 4.2.3.1 Definition . 11 4.2.3.2 Limit . 11 4.2.3.3 Conformance . 11 4.2.4 Spurious emissions . 11 4.2.4.1 Definition . 11 4.2.4.2 Limits . 11 4.2.4.3 Conformance . 13 4.2.5 Out-of-band emissions . 13 4.2.5.1 Definition . 13 4.2.5.2 Limit . 13 4.2.5.3 Conformance . 17 4.2.6 MCOFDM systems: ACLR performance . 17 4.2.6.1 Definition . 17 4.2.6.2 Limit . 17 4.2.6.3 Conformance . 17 4.2.7 MCOFDM systems: MER performance . 17 4.2.7.1 Definition . 17 4.2.7.2 Limit . 17 4.2.7.3 Conformance . 17 4.2.8 Behaviour in case of erroneous ETI signal . 17 4.2.8.1 Definition . 17 4.2.8.2 Limit . 17 4.2.8.3 Conformance . 18 4.2.9 BER-Performance degradation . 18 4.2.9.1 Definition . 18 4.2.9.2 Limit . 18 4.2.9.3 Conformance . 18 5 Testing for compliance with technical requirements . 19 5.1 Environmental conditions for testing . 19 5.2 Interpretation of the measurement results . 19 5.3 Methods of measurement . 19 SIST EN 302 077 V2.1.1:2018



ETSI ETSI EN 302 077 V2.1.1 (2018-06) 4 5.3.1 Rated output power accuracy . 19 5.3.1.1 Method of measurement . 19 5.3.1.1.1 Initial conditions . 19 5.3.1.1.2 Procedure . 20 5.3.1.1.3 Test requirements . 20 5.3.2 Frequency stability . 20 5.3.2.1 Method of measurement . 20 5.3.2.1.1 Initial conditions . 20 5.3.2.1.2 Procedure . 20 5.3.2.1.3 Test requirements . 21 5.3.3 Crest factor. 21 5.3.3.1 Method of measurement . 21 5.3.3.1.1 Initial conditions . 21 5.3.3.1.2 Procedure . 21 5.3.3.1.3 Test requirements . 21 5.3.4 Spurious emissions . 21 5.3.4.1 Method of measurement . 21 5.3.4.1.1 Initial conditions . 21 5.3.4.1.2 Procedure . 22 5.3.4.1.3 Test requirements . 22 5.3.5 Out-of-band emissions . 22 5.3.5.1 Method of measurement . 22 5.3.5.1.1 Initial conditions . 22 5.3.5.1.2 Procedure . 22 5.3.5.1.3 Test requirements . 22 5.3.6 MCOFDM systems: ACLR . 22 5.3.6.1 Method of measurement . 22 5.3.6.1.1 Initial conditions . 22 5.3.6.1.2 Procedure . 23 5.3.6.1.3 Test requirements . 23 5.3.7 MCOFDM systems: MER . 23 5.3.7.1 Method of measurement . 23 5.3.7.1.1 Initial conditions . 23 5.3.7.1.2 Procedure . 23 5.3.7.1.3 Test requirements . 23 5.3.8 Behaviour in case of erroneous ETI signal . 24 5.3.8.1 Method of measurement . 24 5.3.8.1.1 Initial conditions . 24 5.3.8.1.2 Procedure . 24 5.3.8.1.3 Test requirements . 24 5.3.9 BER-Performance degradation . 24 5.3.9.1 Method of measurement . 24 5.3.9.1.1 Initial conditions . 24 5.3.9.1.2 Procedure . 24 5.3.9.1.3 Test requirements . 24 Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 25 Annex B (normative): General measuring arrangements . 27 B.1 Testing arrangements for antenna port measurements . 27 B.1.1 Spurious emissions . 27 B.1.2 Out-of-band emissions . 28 B.1.3 MCOFDM: ACLR and MER performance . 29 B.1.4 Test frequency range . 29 B.1.5 Test modulating signal . 30 Annex C (normative): Typical COFDM measuring arrangements . 31 C.1 ETI errors . 31 C.2 Bit Error performance measurement . 31 SIST EN 302 077 V2.1.1:2018



ETSI ETSI EN 302 077 V2.1.1 (2018-06) 5 C.2.1 Test procedure . 31 Annex D (informative): Practical measurement of spurious domain emissions . 33 D.1 Introduction . 33 D.2 Directional coupler issues . 33 Annex E (informative): Spectrum measurements . 34 Annex F (informative): MCOFDM systems . 35 F.1 Introduction . 35 F.2 Architecture . 36 Annex G (informative): Change history . 38 History . 39
SIST EN 302 077 V2.1.1:2018



ETSI ETSI EN 302 077 V2.1.1 (2018-06) 6 Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [i.1]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations.
National transposition dates Date of adoption of this EN: 4 June 2018 Date of latest announcement of this EN (doa): 30 September 2018 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 March 2019 Date of withdrawal of any conflicting National Standard (dow): 31 March 2020
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. SIST EN 302 077 V2.1.1:2018



ETSI ETSI EN 302 077 V2.1.1 (2018-06) 7 1 Scope The present document specifies technical characteristics and methods of measurements for transmitter equipment for broadcast sound services using the Digital Audio Broadcast (DAB) modulation system operating in VHF band III
(174 MHz to 240 MHz). The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.1] under the conditions identified in annex A. NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive 2014/53/EU [i.1] is given in annex A. 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number or version number. Only the cited version applies. Referenced documents which are not found to be publicly available in the expected location might be found at https://docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. [1] ETSI EN 300 401 (V2.1.1) (01-2017): "Radio broadcasting systems; Digital Audio Broadcasting (DAB) to mobile, portable and fixed receivers". [2] ETSI ETS 300 799 (Edition 1) (09-1997): "Digital Audio Broadcasting (DAB); Distribution interfaces; Ensemble Transport Interface (ETI)". 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. [i.2] ETSI TR 100 028 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics". [i.3] ETSI TR 100 028-2: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics; Part 2". [i.4] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. SIST EN 302 077 V2.1.1:2018



ETSI ETSI EN 302 077 V2.1.1 (2018-06) 8 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in Directive 2014/53/EU [i.1] and the following apply: Adjacent Channel Leakage Ratio (ACLR): ratio of the mean power of the DAB signal in the OFDM block at fL to the mean power of the unoccupied OFDM block within the MCOFDM group antenna port: port of an apparatus which is designed, in normal operation, to be connected to an antenna using coaxial cable broadcasting service: radiocommunication service in which the transmissions are intended for direct reception by the general public NOTE: This service may include sound transmissions, television transmissions or other types of transmission. class of emission: set of characteristics of an emission, designated by standard symbols, e.g. type of modulation of the main carrier, modulating signal, type of information to be transmitted, and also, if appropriate, any additional signal characteristics DAB transmitter: device comprising a DAB exciter, RF amplifier and RF system filter dBc: decibels relative to the unmodulated carrier power of the emission NOTE: In the cases which do not have a carrier, for example in some digital modulation schemes where the carrier is not accessible for measurement, the reference level equivalent to dBc is decibels relative to the mean power P. enclosure port: physical boundary of the apparatus through which electromagnetic fields may radiate or impinge NOTE: In the case of integral antenna equipment, this port is inseparable from the antenna port. exclusion band: band of radio frequencies where no measurements are made harmonic: component of order greater than 1 of the F
...

ETSI EN 302 077 V2.1.1 (2018-06)






HARMONISED EUROPEAN STANDARD
Transmitting equipment for the
Digital Audio Broadcasting (DAB) service;
Harmonised Standard for access to radio spectrum

---------------------- Page: 1 ----------------------
2 ETSI EN 302 077 V2.1.1 (2018-06)



Reference
REN/ERM-TG17-015
Keywords
audio, broadcasting, DAB, digital, harmonised
standard, radio, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 302 077 V2.1.1 (2018-06)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Technical requirements specifications . 10
4.1 Environmental profile . 10
4.2 Conformance requirements . 10
4.2.1 Rated output power accuracy . 10
4.2.1.1 Definition . 10
4.2.1.2 Limit . 10
4.2.1.3 Conformance . 10
4.2.2 Frequency stability . 10
4.2.2.1 Definition . 10
4.2.2.2 Limit . 11
4.2.2.3 Conformance . 11
4.2.3 Crest factor. 11
4.2.3.1 Definition . 11
4.2.3.2 Limit . 11
4.2.3.3 Conformance . 11
4.2.4 Spurious emissions . 11
4.2.4.1 Definition . 11
4.2.4.2 Limits . 11
4.2.4.3 Conformance . 13
4.2.5 Out-of-band emissions . 13
4.2.5.1 Definition . 13
4.2.5.2 Limit . 13
4.2.5.3 Conformance . 17
4.2.6 MCOFDM systems: ACLR performance . 17
4.2.6.1 Definition . 17
4.2.6.2 Limit . 17
4.2.6.3 Conformance . 17
4.2.7 MCOFDM systems: MER performance . 17
4.2.7.1 Definition . 17
4.2.7.2 Limit . 17
4.2.7.3 Conformance . 17
4.2.8 Behaviour in case of erroneous ETI signal . 17
4.2.8.1 Definition . 17
4.2.8.2 Limit . 17
4.2.8.3 Conformance . 18
4.2.9 BER-Performance degradation . 18
4.2.9.1 Definition . 18
4.2.9.2 Limit . 18
4.2.9.3 Conformance . 18
5 Testing for compliance with technical requirements . 19
5.1 Environmental conditions for testing . 19
5.2 Interpretation of the measurement results . 19
5.3 Methods of measurement . 19
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 302 077 V2.1.1 (2018-06)
5.3.1 Rated output power accuracy . 19
5.3.1.1 Method of measurement . 19
5.3.1.1.1 Initial conditions . 19
5.3.1.1.2 Procedure . 20
5.3.1.1.3 Test requirements . 20
5.3.2 Frequency stability . 20
5.3.2.1 Method of measurement . 20
5.3.2.1.1 Initial conditions . 20
5.3.2.1.2 Procedure . 20
5.3.2.1.3 Test requirements . 21
5.3.3 Crest factor. 21
5.3.3.1 Method of measurement . 21
5.3.3.1.1 Initial conditions . 21
5.3.3.1.2 Procedure . 21
5.3.3.1.3 Test requirements . 21
5.3.4 Spurious emissions . 21
5.3.4.1 Method of measurement . 21
5.3.4.1.1 Initial conditions . 21
5.3.4.1.2 Procedure . 22
5.3.4.1.3 Test requirements . 22
5.3.5 Out-of-band emissions . 22
5.3.5.1 Method of measurement . 22
5.3.5.1.1 Initial conditions . 22
5.3.5.1.2 Procedure . 22
5.3.5.1.3 Test requirements . 22
5.3.6 MCOFDM systems: ACLR . 22
5.3.6.1 Method of measurement . 22
5.3.6.1.1 Initial conditions . 22
5.3.6.1.2 Procedure . 23
5.3.6.1.3 Test requirements . 23
5.3.7 MCOFDM systems: MER . 23
5.3.7.1 Method of measurement . 23
5.3.7.1.1 Initial conditions . 23
5.3.7.1.2 Procedure . 23
5.3.7.1.3 Test requirements . 23
5.3.8 Behaviour in case of erroneous ETI signal . 24
5.3.8.1 Method of measurement . 24
5.3.8.1.1 Initial conditions . 24
5.3.8.1.2 Procedure . 24
5.3.8.1.3 Test requirements . 24
5.3.9 BER-Performance degradation . 24
5.3.9.1 Method of measurement . 24
5.3.9.1.1 Initial conditions . 24
5.3.9.1.2 Procedure . 24
5.3.9.1.3 Test requirements . 24
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 25
Annex B (normative): General measuring arrangements . 27
B.1 Testing arrangements for antenna port measurements . 27
B.1.1 Spurious emissions . 27
B.1.2 Out-of-band emissions . 28
B.1.3 MCOFDM: ACLR and MER performance . 29
B.1.4 Test frequency range . 29
B.1.5 Test modulating signal . 30
Annex C (normative): Typical COFDM measuring arrangements . 31
C.1 ETI errors . 31
C.2 Bit Error performance measurement . 31
ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 302 077 V2.1.1 (2018-06)
C.2.1 Test procedure . 31
Annex D (informative): Practical measurement of spurious domain emissions . 33
D.1 Introduction . 33
D.2 Directional coupler issues . 33
Annex E (informative): Spectrum measurements . 34
Annex F (informative): MCOFDM systems . 35
F.1 Introduction . 35
F.2 Architecture . 36
Annex G (informative): Change history . 38
History . 39


ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 302 077 V2.1.1 (2018-06)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.

National transposition dates
Date of adoption of this EN: 4 June 2018
Date of latest announcement of this EN (doa): 30 September 2018
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 2019
Date of withdrawal of any conflicting National Standard (dow): 31 March 2020

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI EN 302 077 V2.1.1 (2018-06)
1 Scope
The present document specifies technical characteristics and methods of measurements for transmitter equipment for
broadcast sound services using the Digital Audio Broadcast (DAB) modulation system operating in VHF band III
(174 MHz to 240 MHz).
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.1] under the
conditions identified in annex A.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 401 (V2.1.1) (01-2017): "Radio broadcasting systems; Digital Audio Broadcasting
(DAB) to mobile, portable and fixed receivers".
[2] ETSI ETS 300 799 (Edition 1) (09-1997): "Digital Audio Broadcasting (DAB); Distribution
interfaces; Ensemble Transport Interface (ETI)".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] ETSI TR 100 028 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics".
[i.3] ETSI TR 100 028-2: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics; Part 2".
[i.4] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
ETSI

---------------------- Page: 7 ----------------------
8 ETSI EN 302 077 V2.1.1 (2018-06)
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in Directive 2014/53/EU [i.1] and the
following apply:
Adjacent Channel Leakage Ratio (ACLR): ratio of the mean power of the DAB signal in the OFDM block at f to
L
the mean power of the unoccupied OFDM block within the MCOFDM group
antenna port: port of an apparatus which is designed, in normal operation, to be connected to an antenna using coaxial
cable
broadcasting service: radiocommunication service in which the transmissions are intended for direct reception by the
general public
NOTE: This service may include sound transmissions, television transmissions or other types of transmission.
class of emission: set of characteristics of an emission, designated by standard symbols, e.g. type of modulation of the
main carrier, modulating signal, type of information to be transmitted, and also, if appropriate, any additional signal
characteristics
DAB transmitter: device comprising a DAB exciter, RF amplifier and RF system filter
dBc: decibels relative to the unmodulated carrier power of the emission
NOTE: In the cases which do not have a carrier, for example in some digital modulation schemes where the
carrier is not accessible for measurement, the reference level equivalent to dBc is decibels relative to the
mean power P.
enclosure port: physical boundary of the apparatus through which electromagnetic fields may radiate or impinge
NOTE: In the case of integral antenna equipment, this port is inseparable from the antenna port.
exclusion band: band of radio frequencies where no measurements are made
harmonic: component of order greater than 1 of the Fourier series of a periodic quantity
high power transmitter: transmitter whose conducted output power is greater than 1 000 W per OFDM block
intermodulation products: unwanted frequencies re
...

Draft ETSI EN 302 077 V2.1.0 (2018-03)






HARMONISED EUROPEAN STANDARD
Transmitting equipment for the
Digital Audio Broadcasting (DAB) service;
Harmonised Standard for access to radio spectrum

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 302 077 V2.1.0 (2018-03)



Reference
REN/ERM-TG17-015
Keywords
audio, broadcasting, DAB, digital, harmonised
standard, radio, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 302 077 V2.1.0 (2018-03)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Technical requirements specifications . 10
4.1 Environmental profile . 10
4.2 Conformance requirements . 10
4.2.1 Rated output power accuracy . 10
4.2.1.1 Definition . 10
4.2.1.2 Limit . 10
4.2.1.3 Conformance . 10
4.2.2 Frequency stability . 10
4.2.2.1 Definition . 10
4.2.2.2 Limit . 11
4.2.2.3 Conformance . 11
4.2.3 Crest factor. 11
4.2.3.1 Definition . 11
4.2.3.2 Limit . 11
4.2.3.3 Conformance . 11
4.2.4 Spurious emissions . 11
4.2.4.1 Definition . 11
4.2.4.2 Limits . 11
4.2.4.3 Conformance . 13
4.2.5 Out-of-band emissions . 13
4.2.5.1 Definition . 13
4.2.5.2 Limit . 13
4.2.5.3 Conformance . 17
4.2.6 MCOFDM systems: ACLR performance . 17
4.2.6.1 Definition . 17
4.2.6.2 Limit . 17
4.2.6.3 Conformance . 17
4.2.7 MCOFDM systems: MER performance . 17
4.2.7.1 Definition . 17
4.2.7.2 Limit . 17
4.2.7.3 Conformance . 17
4.2.8 Behaviour in case of erroneous ETI signal . 17
4.2.8.1 Definition . 17
4.2.8.2 Limit . 17
4.2.8.3 Conformance . 18
4.2.9 BER-Performance degradation . 18
4.2.9.1 Definition . 18
4.2.9.2 Limit . 18
4.2.9.3 Conformance . 18
5 Testing for compliance with technical requirements . 19
5.1 Environmental conditions for testing . 19
5.2 Interpretation of the measurement results . 19
5.3 Methods of measurement . 19
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 302 077 V2.1.0 (2018-03)
5.3.1 Rated output power accuracy . 19
5.3.1.1 Method of measurement . 19
5.3.1.1.1 Initial conditions . 19
5.3.1.1.2 Procedure . 20
5.3.1.1.3 Test requirements . 20
5.3.2 Frequency stability . 20
5.3.2.1 Method of measurement . 20
5.3.2.1.1 Initial conditions . 20
5.3.2.1.2 Procedure . 20
5.3.2.1.3 Test requirements . 21
5.3.3 Crest factor. 21
5.3.3.1 Method of measurement . 21
5.3.3.1.1 Initial conditions . 21
5.3.3.1.2 Procedure . 21
5.3.3.1.3 Test requirements . 21
5.3.4 Spurious emissions . 21
5.3.4.1 Method of measurement . 21
5.3.4.1.1 Initial conditions . 21
5.3.4.1.2 Procedure . 22
5.3.4.1.3 Test requirements . 22
5.3.5 Out-of-band emissions . 22
5.3.5.1 Method of measurement . 22
5.3.5.1.1 Initial conditions . 22
5.3.5.1.2 Procedure . 22
5.3.5.1.3 Test requirements . 22
5.3.6 MCOFDM systems: ACLR . 22
5.3.6.1 Method of measurement . 22
5.3.6.1.1 Initial conditions . 22
5.3.6.1.2 Procedure . 23
5.3.6.1.3 Test requirements . 23
5.3.7 MCOFDM systems: MER . 23
5.3.7.1 Method of measurement . 23
5.3.7.1.1 Initial conditions . 23
5.3.7.1.2 Procedure . 23
5.3.7.1.3 Test requirements . 23
5.3.8 Behaviour in case of erroneous ETI signal . 24
5.3.8.1 Method of measurement . 24
5.3.8.1.1 Initial conditions . 24
5.3.8.1.2 Procedure . 24
5.3.8.1.3 Test requirements . 24
5.3.9 BER-Performance degradation . 24
5.3.9.1 Method of measurement . 24
5.3.9.1.1 Initial conditions . 24
5.3.9.1.2 Procedure . 24
5.3.9.1.3 Test requirements . 24
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 25
Annex B (normative): General measuring arrangements . 27
B.1 Testing arrangements for antenna port measurements . 27
B.1.1 Spurious emissions . 27
B.1.2 Out-of-band emissions . 28
B.1.3 MCOFDM: ACLR and MER performance . 29
B.1.4 Test frequency range . 29
B.1.5 Test modulating signal . 30
Annex C (normative): Typical COFDM measuring arrangements . 31
C.1 ETI errors . 31
C.2 Bit Error performance measurement . 31
ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 302 077 V2.1.0 (2018-03)
C.2.1 Test procedure . 31
Annex D (informative): Practical measurement of spurious domain emissions . 33
D.1 Introduction . 33
D.2 Directional coupler issues . 33
Annex E (informative): Spectrum measurements . 34
Annex F (informative): MCOFDM systems . 35
F.1 Introduction . 35
F.2 Architecture . 36
Annex G (informative): Change history . 38
History . 39


ETSI

---------------------- Page: 5 ----------------------
6 Draft ETSI EN 302 077 V2.1.0 (2018-03)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 6 ----------------------
7 Draft ETSI EN 302 077 V2.1.0 (2018-03)
1 Scope
The present document specifies technical characteristics and methods of measurements for transmitter equipment for
broadcast sound services using the Digital Audio Broadcast (DAB) modulation system operating in VHF band III
(174 MHz to 240 MHz).
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.1] under the
conditions identified in annex A.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in Annex A.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 401 (V2.1.1) (01-2017): "Radio broadcasting systems; Digital Audio Broadcasting
(DAB) to mobile, portable and fixed receivers".
[2] ETSI ETS 300 799 (Edition 1) (09-1997): "Digital Audio Broadcasting (DAB); Distribution
interfaces; Ensemble Transport Interface (ETI)".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] ETSI TR 100 028 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics".
[i.3] ETSI TR 100 028-2: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics; Part 2".
[i.4] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
ETSI

---------------------- Page: 7 ----------------------
8 Draft ETSI EN 302 077 V2.1.0 (2018-03)
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in Directive 2014/53/EU [i.1] and the
following apply:
adjacent channel leakage ratio (ACLR): ratio of the mean power of the DAB signal in the OFDM block at f to the
L
mean power of the unoccupied OFDM block within the MCOFDM group
antenna port: port of an apparatus which is designed, in normal operation, to be connected to an antenna using coaxial
cable
broadcasting service: radiocommunication service in which the transmissions are intended for direct reception by the
general public
NOTE: This service may include sound transmissions, television transmissions or other types of transmission.
class of emission: set of characteristics of an emission, designated by standard symbols, e.g. type of modulation of the
main carrier, modulating signal, type of information to be transmitted, and also, if appropriate, any additional signal
characteristics
dBc: decibels relative to the unmodulated carrier power of the emission
NOTE: In the cases which do not have a carrier, for example in some digital modulation schemes where the
carrier is not accessible for measurement, the reference level equivalent to dBc is decibels relative to the
mean power P.
DAB transmitter: device comprising a DAB exciter, RF amplifier and RF system filter
enclosure port: physical boundary of the apparatus through which electromagnetic fields may radiate or impinge
NOTE: In the case of integral antenna equipment, this port is inseparable from the antenna port.
exclusion band: band of radio frequencies where no measurements are made
harmonic: component of order greater than 1 of the Fourier series of a periodic q
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.