ETSI EN 301 908-4 V6.1.1 (2013-02)
IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 4: CDMA Multi-Carrier (cdma2000) User Equipment (UE)
IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 4: CDMA Multi-Carrier (cdma2000) User Equipment (UE)
REN/MSG-TFES-010-04
Celična omrežja IMT - Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE - 4. del: Uporabniška oprema CDMA z več nosilnimi frekvencami (cdma2000)
Ta dokument se uporablja za radijsko opremo naslednje vrste:
– uporabniška oprema (imenovana tudi mobilne postaje ali dostopni terminali) IMT-2000 CDMA z več nosilnimi frekvencami (cdma2000). Radijska oprema teh vrst lahko deluje v vseh delih frekvenčnih pasov iz preglednice 1-1.
Preglednica 1-1: Pasovi, v katerih delujejo mobilne postaje CDMA z več nosilnimi frekvencami
V tem dokumentu so določene zahteve za uporabniško opremo IMT-2000 CDMA z več nosilnimi frekvencami (cdma2000) in uporabniško opremo sproščenega CDMA (UMB) z več nosilnimi frekvencami. Uporabniška oprema IMT-2000 CDMA z več nosilnimi frekvencami (cdma2000) lahko podpira:
1) delovanje v sistemih razširjenega spektra cdma2000, kot je opisano v 3GPP2 C.S0002-E [2]; v tem besedilu: delovanje v tipu 1 sistema cdma2000; ali
2) delovanje v paketnih podatkovnih sistemih z visoko stopnjo prenosa, kot je opisano v 3GPP2 C.S0024-200-C [7] v podvrstah 0, 1, 2 in 3; v tem besedilu: delovanje v tipu 2 sistema cdma2000; ali
3) delovanje v tipih 1 in 2 sistemov cdma2000.
Ta dokument zajema določbe člena 3.2 Direktive 1999/5/ES [i.2] (direktive R&TTE), ki navaja, da »[...] mora biti radijska oprema skonstruirana tako, da učinkovito uporablja spekter, razporejen za prizemne/vesoljske radijske komunikacije in orbitalne vire, tako da ne pride do škodljivega motenja.« Poleg tega dokumenta se za opremo na področju uporabe tega dokumenta uporabljajo tudi drugi standardi EN, ki določajo tehnične zahteve v zvezi z bistvenimi zahtevami iz drugih delov člena 3 direktive R&TTE [i.2].
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.FGPDIMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 4: CDMA Multi-Carrier (cdma2000) User Equipment (UE)33.070.99Druge mobilne storitveOther mobile services33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 908-4 Version 6.2.1SIST EN 301 908-4 V6.2.1:2013en01-oktober-2013SIST EN 301 908-4 V6.2.1:2013SLOVENSKI
STANDARD
SIST EN 301 908-4 V6.2.1:2013
ETSI EN 301 908-4 V6.2.1 (2013-06) IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 4: CDMA Multi-Carrier (cdma2000) User Equipment (UE)
Harmonized European Standard SIST EN 301 908-4 V6.2.1:2013
ETSI ETSI EN 301 908-4 V6.2.1 (2013-06) 2
Reference REN/MSG-TFES-010-04 Keywords 3G, 3GPP, 3GPP2, cdma2000, cellular, digital, IMT-2000, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2013. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-4 V6.2.1:2013
ETSI ETSI EN 301 908-4 V6.2.1 (2013-06) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Introduction . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 8 2.2 Informative references . 9 3 Definitions, symbols and abbreviations . 9 3.1 Definitions . 9 3.2 Symbols . 18 3.3 Abbreviations . 21 4 Technical requirements specifications . 22 4.1 Environmental profile . 22 4.2 Conformance requirements . 23 4.2.1 Introduction. 23 4.2.2 Conducted spurious emissions when transmitting . 23 4.2.2.1 Definition . 23 4.2.2.2 Limits . 23 4.2.2.2.1 Mobile stations operating in type 1 cdma2000 systems using spreading rate 1 or operating in type 2 cdma2000 systems . 24 4.2.2.2.2 Mobile stations operating in type 1 cdma2000 systems using spreading rate 3 . 25 4.2.2.2.3 Mobile stations operating in multicarrier HRPD systems . 25 4.2.2.3 Conformance . 26 4.2.3 Maximum RF output power . 26 4.2.3.1 Definition . 26 4.2.3.2 Limits . 27 4.2.3.3 Conformance . 27 4.2.4 Minimum controlled output power . 27 4.2.4.1 Definition . 27 4.2.4.2 Limits . 28 4.2.4.3 Conformance . 28 4.2.5 Conducted spurious emissions when not transmitting . 28 4.2.5.1 Definition . 28 4.2.5.2 Limits . 28 4.2.5.3 Conformance . 28 4.2.6 Receiver blocking characteristics . 28 4.2.6.1 Definition . 28 4.2.6.2 Limits . 29 4.2.6.2.1 Mobile station operating in type 1 cdma2000 systems . 29 4.2.6.2.2 Mobile station operating in type 2 cdma2000 systems . 29 4.2.6.3 Conformance . 29 4.2.7 Intermodulation spurious response attenuation . 29 4.2.7.1 Definition . 29 4.2.7.2 Limits . 29 4.2.7.2.1 Mobile station operating in type 1 cdma2000 systems . 29 4.2.7.2.2 Mobile stations operating in type 2 cdma2000 systems . 29 4.2.7.3 Conformance . 29 4.2.8 Adjacent channel selectivity . 30 4.2.8.1 Definition . 30 4.2.8.2 Limits . 30 4.2.8.2.1 Mobile station operating in type 1 cdma2000 systems . 30 4.2.8.2.2 Mobile station operating in type 2 cdma2000 systems . 30 4.2.8.3 Conformance . 30 SIST EN 301 908-4 V6.2.1:2013
ETSI ETSI EN 301 908-4 V6.2.1 (2013-06) 4 4.2.9 Supervision of paging channel or Forward Common Control Channel . 30 4.2.9.1 Definition . 30 4.2.9.2 Limits . 30 4.2.9.3 Conformance . 30 4.2.10 Supervision of forward traffic channel . 31 4.2.10.1 Definition . 31 4.2.10.2 Limits . 31 4.2.10.3 Conformance . 31 4.2.11 Supervision of control channel . 31 4.2.11.1 Definition . 31 4.2.11.2 Limits . 32 4.2.11.3 Conformance . 32 4.2.12 Supervision procedures in variable rate state . 32 4.2.12.1 Definition . 32 4.2.12.2 Limits . 32 4.2.12.3 Conformance . 33 5 Testing for compliance with technical requirements . 33 5.1 Conditions for testing . 33 5.1.1 Introduction. 33 5.1.2 Standard equipment under test . 33 5.1.2.1 Basic equipment . 33 5.1.2.2 Ancillary equipment . 33 5.2 Interpretation of the measurement results . 33 5.3 Essential radio test suites . 34 5.3.1 Conducted spurious emissions when transmitting . 34 5.3.1.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems . 34 5.3.1.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems . 36 5.3.1.3 Test procedure for mobile stations supporting multicarrier HRPD operation . 37 5.3.2 Maximum RF output power . 37 5.3.2.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems . 37 5.3.2.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems . 40 5.3.3 Minimum controlled output power . 41 5.3.3.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems . 41 5.3.3.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems . 42 5.3.4 Conducted spurious emissions when not transmitting . 42 5.3.4.1 Test procedure for mobile stations supporting operation in type 1 and/or type 2 cdma2000 systems . 42 5.3.5 Receiver blocking characteristics . 42 5.3.5.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems . 42 5.3.5.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems . 43 5.3.6 Intermodulation spurious response attenuation . 44 5.3.6.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems . 44 5.3.6.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems . 46 5.3.7 Adjacent channel selectivity . 46 5.3.7.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems . 46 5.3.7.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems . 48 5.3.8 Supervision of paging channel or Forward Common Control Channel . 49 5.3.9 Supervision of forward traffic channel . 50 5.3.10 Supervision of control channel . 51 5.3.11 Supervision procedures in variable rate state . 52 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 53 Annex B (normative): Environmental profile and standard test conditions . 55 B.1 Introduction . 55 B.2 CDMA environmental requirements . 55 B.2.1 Temperature and power supply voltage . 55 B.2.1.1 Definition . 55 B.2.1.2 Method of measurement . 55 SIST EN 301 908-4 V6.2.1:2013
ETSI ETSI EN 301 908-4 V6.2.1 (2013-06) 5 B.2.1.3 Minimum standard . 56 B.2.2 High humidity . 56 B.2.2.1 Definition . 56 B.2.2.2 Method of measurement . 56 B.2.2.3 Minimum standard . 56 B.2.3 Vibration stability . 57 B.2.3.1 Definition . 57 B.2.3.2 Method of measurement . 57 B.2.3.3 Minimum standard . 57 B.2.4 Shock stability . 57 B.2.4.1 Definition . 57 B.2.4.2 Method of measurement . 57 B.2.4.3 Minimum standard . 57 B.3 Standard test conditions. 57 B.3.1 Standard environmental test conditions . 57 B.3.2 Standard conditions for the primary power supply . 58 B.3.2.1 General . 58 B.3.2.2 Standard DC test voltage from accumulator batteries . 58 B.3.2.3 Standard AC voltage and frequency . 58 Annex C (informative): Void . 59 Annex D (informative): Bibliography . 60 History . 61
SIST EN 301 908-4 V6.2.1:2013
ETSI ETSI EN 301 908-4 V6.2.1 (2013-06) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Directive 98/34/EC [i.1] as amended by Directive 98/48/EC [i.4]. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2]. See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonized Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC [i.2] are summarised in annex A. The present document is part 4 of a multi-part deliverable. Full details of the entire series can be found in part 1 [10].
National transposition dates Date of adoption of this EN: 10 June 2013 Date of latest announcement of this EN (doa): 30 September 2013 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 March 2014 Date of withdrawal of any conflicting National Standard (dow): 31 March 2015
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The modular structure is shown in EG 201 399 [i.3]. SIST EN 301 908-4 V6.2.1:2013
ETSI ETSI EN 301 908-4 V6.2.1 (2013-06) 7 1 Scope The present document applies to the following radio equipment type: • User Equipment (also denoted as Mobile stations or Access Terminals) for IMT-2000 CDMA multi-carrier (cdma2000). These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1. Table 1-1: CDMA multi-carrier mobile stations operating bands Band Class (BC) Direction of transmission CDMA multi-carrier mobile stations operating bands 6 Transmit 1 920 MHz to 1 980 MHz
Receive 2 110 MHz to 2 170 MHz 8 Transmit 1 710 MHz to 1 785 MHz
Receive 1 805 MHz to 1 880 MHz 9 Transmit 880 MHz to 915 MHz
Receive 925 MHz to 960 MHz 13 Transmit 2 500 MHz to 2 570 MHz
Receive 2 620 MHz to 2 690 MHz
The present document covers requirements for IMT-2000 CDMA multi-carrier (cdma2000) User Equipments and Evolved CDMA Multi-Carrier (UMB) User Equipment. User Equipment for IMT-2000 CDMA multi-carrier (cdma2000) may support: 1) operation in cdma2000 Spread Spectrum Systems as defined in 3GPP2 C.S0002-E [2], referred to herein as operation in type 1 cdma2000 systems; or 2) operation in cdma2000 High Rate Packet Data Systems as defined in 3GPP2 C.S0024-200-C [7] subtypes 0, 1, 2 and 3, referred to herein as operation in type 2 cdma2000 systems; or 3) operation in both, type 1 and type 2 cdma2000 systems. The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive) article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the web site http://www.newapproach.org. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. SIST EN 301 908-4 V6.2.1:2013
ETSI ETSI EN 301 908-4 V6.2.1 (2013-06) 8 2.1 Normative references The following referenced documents are necessary for the application of the present document. [1] 3GPP2 C.S0011-E V1.0 (April 2012): "Recommended Minimum Performance Standards for cdma2000 Spread Spectrum Mobile Stations". NOTE:
Available at: http://www.3gpp2.org/Public_html/specs/C.S0011-E_v1.0_1x_MS_MPS_20120505.pdf. [2] 3GPP2 C.S0002-E V3.0 (June 2011): "Physical Layer Standard for cdma2000 Spread Spectrum Systems Revision E". NOTE: Available at: http://www.3gpp2.org/Public_html/specs/C.S0002-E_v3.0_cdma2000_1x_PHY_20110620.pdf. [3] 3GPP2 C.S0010-E V1.0 (December 2011): "Recommended Minimum Performance Standards for cdma2000 Spread Spectrum Base Stations". NOTE:
Available at: http://www.3gpp2.org/Public_html/specs/C.S0010-E_v1.0_BS_MPS_20111231.pdf. [4] TIA-870-A (March 2005): "Test Data Service Option (TDSO) for cdma2000 Spread Spectrum Systems - Revision A". [5] 3GPP2 C.S0025-A V1.0 (March 2011): "Markov Service Option (MSO) for cdma2000 Spread Spectrum Systems". NOTE: Available at: http://www.3gpp2.org/Public_html/specs/C.S0025-A%20v1.0%20MSO.pdf. [6] 3GPP2 C.S0005-E V3.0 (June 2011): "Upper Layer (Layer 3) Signaling Standard for cdma2000 Spread Spectrum Systems". NOTE: Available at: http://www.3gpp2.org/Public_html/specs/C.S0005-E_v3.0_cdma2000_1x_Layer-3_20110620.pdf. [7] 3GPP2 C.S0024-200-C V2.0 (December 2011): "Physical Layer for cdma2000 High Rate Packet Data Air Interface Specification". NOTE: Available at: http://www.3gpp2.org/Public_html/specs/C.S0024-200-C_v2.0_Physical_Layer_HRPD_20111219.pdf. [8] 3GPP2 C.S0033-D V1.0 (April 2012): "Recommended Minimum Performance Standards for cdma2000 High Rate Packet Data Access Ter
...
ETSI EN 301 908-4 V6.2.1 (2013-06)
Harmonized European Standard
IMT cellular networks;
Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive;
Part 4: CDMA Multi-Carrier (cdma2000) User Equipment (UE)
---------------------- Page: 1 ----------------------
2 ETSI EN 301 908-4 V6.2.1 (2013-06)
Reference
REN/MSG-TFES-010-04
Keywords
3G, 3GPP, 3GPP2, cdma2000, cellular, digital,
IMT-2000, mobile, radio, regulation, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2013.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 301 908-4 V6.2.1 (2013-06)
Contents
Intellectual Property Rights . 6
Foreword . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 18
3.3 Abbreviations . 21
4 Technical requirements specifications . 22
4.1 Environmental profile . 22
4.2 Conformance requirements . 23
4.2.1 Introduction. 23
4.2.2 Conducted spurious emissions when transmitting . 23
4.2.2.1 Definition . 23
4.2.2.2 Limits . 23
4.2.2.2.1 Mobile stations operating in type 1 cdma2000 systems using spreading rate 1 or operating in
type 2 cdma2000 systems . 24
4.2.2.2.2 Mobile stations operating in type 1 cdma2000 systems using spreading rate 3 . 25
4.2.2.2.3 Mobile stations operating in multicarrier HRPD systems . 25
4.2.2.3 Conformance . 26
4.2.3 Maximum RF output power . 26
4.2.3.1 Definition . 26
4.2.3.2 Limits . 27
4.2.3.3 Conformance . 27
4.2.4 Minimum controlled output power . 27
4.2.4.1 Definition . 27
4.2.4.2 Limits . 28
4.2.4.3 Conformance . 28
4.2.5 Conducted spurious emissions when not transmitting . 28
4.2.5.1 Definition . 28
4.2.5.2 Limits . 28
4.2.5.3 Conformance . 28
4.2.6 Receiver blocking characteristics . 28
4.2.6.1 Definition . 28
4.2.6.2 Limits . 29
4.2.6.2.1 Mobile station operating in type 1 cdma2000 systems . 29
4.2.6.2.2 Mobile station operating in type 2 cdma2000 systems . 29
4.2.6.3 Conformance . 29
4.2.7 Intermodulation spurious response attenuation . 29
4.2.7.1 Definition . 29
4.2.7.2 Limits . 29
4.2.7.2.1 Mobile station operating in type 1 cdma2000 systems . 29
4.2.7.2.2 Mobile stations operating in type 2 cdma2000 systems . 29
4.2.7.3 Conformance . 29
4.2.8 Adjacent channel selectivity . 30
4.2.8.1 Definition . 30
4.2.8.2 Limits . 30
4.2.8.2.1 Mobile station operating in type 1 cdma2000 systems . 30
4.2.8.2.2 Mobile station operating in type 2 cdma2000 systems . 30
4.2.8.3 Conformance . 30
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 301 908-4 V6.2.1 (2013-06)
4.2.9 Supervision of paging channel or Forward Common Control Channel . 30
4.2.9.1 Definition . 30
4.2.9.2 Limits . 30
4.2.9.3 Conformance . 30
4.2.10 Supervision of forward traffic channel . 31
4.2.10.1 Definition . 31
4.2.10.2 Limits . 31
4.2.10.3 Conformance . 31
4.2.11 Supervision of control channel . 31
4.2.11.1 Definition . 31
4.2.11.2 Limits . 32
4.2.11.3 Conformance . 32
4.2.12 Supervision procedures in variable rate state . 32
4.2.12.1 Definition . 32
4.2.12.2 Limits . 32
4.2.12.3 Conformance . 33
5 Testing for compliance with technical requirements . 33
5.1 Conditions for testing . 33
5.1.1 Introduction. 33
5.1.2 Standard equipment under test . 33
5.1.2.1 Basic equipment . 33
5.1.2.2 Ancillary equipment . 33
5.2 Interpretation of the measurement results . 33
5.3 Essential radio test suites . 34
5.3.1 Conducted spurious emissions when transmitting . 34
5.3.1.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems . 34
5.3.1.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems . 36
5.3.1.3 Test procedure for mobile stations supporting multicarrier HRPD operation . 37
5.3.2 Maximum RF output power . 37
5.3.2.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems . 37
5.3.2.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems . 40
5.3.3 Minimum controlled output power . 41
5.3.3.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems . 41
5.3.3.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems . 42
5.3.4 Conducted spurious emissions when not transmitting . 42
5.3.4.1 Test procedure for mobile stations supporting operation in type 1 and/or type 2 cdma2000
systems . 42
5.3.5 Receiver blocking characteristics . 42
5.3.5.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems . 42
5.3.5.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems . 43
5.3.6 Intermodulation spurious response attenuation . 44
5.3.6.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems . 44
5.3.6.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems . 46
5.3.7 Adjacent channel selectivity . 46
5.3.7.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems . 46
5.3.7.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems . 48
5.3.8 Supervision of paging channel or Forward Common Control Channel . 49
5.3.9 Supervision of forward traffic channel . 50
5.3.10 Supervision of control channel . 51
5.3.11 Supervision procedures in variable rate state . 52
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 53
Annex B (normative): Environmental profile and standard test conditions . 55
B.1 Introduction . 55
B.2 CDMA environmental requirements . 55
B.2.1 Temperature and power supply voltage . 55
B.2.1.1 Definition . 55
B.2.1.2 Method of measurement . 55
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 301 908-4 V6.2.1 (2013-06)
B.2.1.3 Minimum standard . 56
B.2.2 High humidity . 56
B.2.2.1 Definition . 56
B.2.2.2 Method of measurement . 56
B.2.2.3 Minimum standard . 56
B.2.3 Vibration stability . 57
B.2.3.1 Definition . 57
B.2.3.2 Method of measurement . 57
B.2.3.3 Minimum standard . 57
B.2.4 Shock stability . 57
B.2.4.1 Definition . 57
B.2.4.2 Method of measurement . 57
B.2.4.3 Minimum standard . 57
B.3 Standard test conditions. 57
B.3.1 Standard environmental test conditions . 57
B.3.2 Standard conditions for the primary power supply . 58
B.3.2.1 General . 58
B.3.2.2 Standard DC test voltage from accumulator batteries . 58
B.3.2.3 Standard AC voltage and frequency . 58
Annex C (informative): Void . 59
Annex D (informative): Bibliography . 60
History . 61
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 301 908-4 V6.2.1 (2013-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group
(MSG).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Directive 98/34/EC [i.1] as amended by Directive 98/48/EC [i.4].
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2].
See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonized Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.2] are summarised in annex A.
The present document is part 4 of a multi-part deliverable. Full details of the entire series can be found in part 1 [10].
National transposition dates
Date of adoption of this EN: 10 June 2013
Date of latest announcement of this EN (doa): 30 September 2013
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 2014
Date of withdrawal of any conflicting National Standard (dow): 31 March 2015
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The
modular structure is shown in EG 201 399 [i.3].
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 301 908-4 V6.2.1 (2013-06)
1 Scope
The present document applies to the following radio equipment type:
• User Equipment (also denoted as Mobile stations or Access Terminals) for IMT-2000 CDMA multi-carrier
(cdma2000).
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1-1.
Table 1-1: CDMA multi-carrier mobile stations operating bands
Band Class (BC) Direction of transmission CDMA multi-carrier mobile
stations operating bands
Transmit 1 920 MHz to 1 980 MHz
6
Receive 2 110 MHz to 2 170 MHz
Transmit 1 710 MHz to 1 785 MHz
8
Receive 1 805 MHz to 1 880 MHz
Transmit 880 MHz to 915 MHz
9
Receive 925 MHz to 960 MHz
Transmit 2 500 MHz to 2 570 MHz
13
Receive 2 620 MHz to 2 690 MHz
The present document covers requirements for IMT-2000 CDMA multi-carrier (cdma2000) User Equipments and
Evolved CDMA Multi-Carrier (UMB) User Equipment.
User Equipment for IMT-2000 CDMA multi-carrier (cdma2000) may support:
1) operation in cdma2000 Spread Spectrum Systems as defined in 3GPP2 C.S0002-E [2], referred to herein as
operation in type 1 cdma2000 systems; or
2) operation in cdma2000 High Rate Packet Data Systems as defined in 3GPP2 C.S0024-200-C [7] subtypes 0, 1,
2 and 3, referred to herein as operation in type 2 cdma2000 systems; or
3) operation in both, type 1 and type 2 cdma2000 systems.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive) article 3.2,
which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
ETSI
---------------------- Page: 7 ----------------------
8 ETSI EN 301 908-4 V6.2.1 (2013-06)
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] 3GPP2 C.S0011-E V1.0 (April 2012): "Recommended Minimum Performance Standards for
cdma2000 Spread Spectrum Mobile Stations".
NOTE: Available at: http://www.3gpp2.org/Public_html/specs/C.S0011-E_v1.0_1x_MS_MPS_20120505.pdf.
[2] 3GPP2 C.S0002-E V3.0 (June 2011): "Physical Layer Standard for cdma2000 Spread Spectrum
Systems Revision E".
NOTE: Available at: http://www.3gpp2.org/Public_html/specs/C.S0002-
E_v3.0_cdma2000_1x_PHY_20110620.pdf.
[3] 3GPP2 C.S0010-E V1.0 (December 2011): "Recommended Minimum Performance Standards for
cdma2000 Spread Spectrum Base Stations".
NOTE: Available at: http://www.3gpp2.org/Public_html/specs/C.S0010-E_v1.0_BS_MPS_20111231.pdf.
[4] TIA-870-A (March 2005): "Test Data Service Option (TDSO) for cdma2000 Spread Spectrum
Systems - Revision A".
[5] 3GPP2 C.S0025-A V1.0 (March 2011): "Markov Service Option (MSO) for cdma2000 Spread
Spectrum Systems".
NOTE: Available at: http://www.3gpp2.org/Public_html/specs/C.S0025-A%20v1.0%20MSO.pdf.
[6] 3GPP2 C.S0005-E V3.0 (June 2011): "Upper Layer (Layer 3) Signaling Standard for cdma2000
Spread Spectrum Systems".
NOTE: Available at: http://www.3gpp2.org/Public_html/specs/C.S0005-E_v3.0_cdma2000_1x_Layer-
3_20110620.pdf.
[7] 3GPP2 C.S0024-200-C V2.0 (December 2011): "Physical Layer for cdma2000 High Rate Packet
Data Air Interface Specification".
NOTE: Available at: http://www.3gpp2.org/Public_html/specs/C.S0024-200-
C_v2.0_Physical_Layer_HRPD_20111219.pdf.
[8] 3GPP2 C.S0033-D V1.0 (April 2012): "Recommended Minimum Performance Standards for
cdma2000 High Rate Packet Data Access Terminal".
NOTE: Available at: http://www.3gpp2.org/Public_html/specs/C.S0033-
D_v1.0_HRPD_AT_MPS_20120506.pdf.
[9]
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.