ETSI EN 300 417-2-2 V1.1.4 (1999-05)

Transmission and Multiplexing (TM); Generic requirements of transport functionality of equipment; Part 2-2: Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital Hierarchy (PDH) physical section layer functions; Implementation Conformance Statement (ICS) proforma specification

REN/TM-01015-2-2b

Prenos in multipleksiranje (TM) – Generične zahteve za prenosno funkcionalnost opreme – 2-2. del: Funkcije fizičnega odseka plasti za sinhrono digitalno hierarhijo (SDH) in pleziohrono digitalno hierarhijo (PDH) – Proforma specifikacija izjave o skladnosti izvedbe (ICS)

General Information

• Status: Published
• Publication Date: 09-May-1999
• Technical Committee: TM 1 - TM Core networks, fibres and cables
• Current Stage: 12 - Completion
• Due Date: 07-May-1999
• Completion Date: 10-May-1999
• Ref Project: SIST EN 300 417-2-2 V1.1.4:2003 - Transmission and Multiplexing (TM); Generic requirements of transport functionality of equipment; Part 2-2: Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital Hierarchy (PDH) physical section layer functions; Implementation Conformance Statement (ICS) proforma specification

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.XQNFLRQDOQRVWTransmission and Multiplexing (TM); Generic requirements of transport functionality of equipment; Part 2-2: Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital Hierarchy (PDH) physical section layer functions; Implementation Conformance Statement (ICS) proforma specification33.040.20Prenosni sistemTransmission systemsICS:Ta slovenski standard je istoveten z:EN 300 417-2-2 Version 1.1.4SIST EN 300 417-2-2 V1.1.4:2003en01-december-2003SIST EN 300 417-2-2 V1.1.4:2003SLOVENSKI
STANDARD



SIST EN 300 417-2-2 V1.1.4:2003



EN 300 417-2-2 V1.1.4 (1999-05)European Standard (Telecommunications series)Transmission and Multiplexing (TM);Generic requirements of transport functionality of equipment;Part 2-2: Synchronous Digital Hierarchy (SDH) andPlesiochronous Digital Hierarchy (PDH)physical section layer functions;Implementation Conformance Statement (ICS)proforma specificationSIST EN 300 417-2-2 V1.1.4:2003



ETSIEN 300 417-2-2 V1.1.4 (1999-05)2ReferenceREN/TM-01015-2-2b (3v0iiieo.PDF)KeywordsICS, PDH, SDH, STM, transmission, testingETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: [phone]
Fax: [phone]Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/[e-mail] copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgIf you find errors in the present document, send yourcomment to: [e-mail] NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1999.All rights reserved.SIST EN 300 417-2-2 V1.1.4:2003



ETSIEN 300 417-2-2 V1.1.4 (1999-05)3ContentsIntellectual Property Rights.9Foreword.9Introduction.101Scope.112References.113Definitions and abbreviations.123.1Definitions.123.2Abbreviations.124Conformance to this ICS proforma specification.14Annex A (normative):ICS proforma for EN 300 417-2-1.15A.1Guidance for completing the ICS proforma.15A.1.1Purposes and structure.15A.1.2Abbreviations and conventions.15A.1.3Instructions for completing the ICS proforma.17Annex B (normative):ICS proforma for STM-1 optical section layer.18B.1Identification of the implementation.18B.1.1Date of the statement.18B.1.2IUT identification.18B.1.3SUT identification.18B.1.4Product supplier.19B.1.5Client.19B.1.6ICS contact person.20B.2Identification of the EN.20B.3Global statement of conformance of OS1 layer.20B.4OS1 layer description.21B.5OS1 layer transmission tables.22B.5.1OS1 source operating wavelength range, OS1_TT_So.22B.5.2OS1 source spectral characteristics, OS1_TT_So.23B.5.3OS1 source optical characteristics, OS1_TT_So.24B.5.4OS1 receiver characteristics, OS1_TT_Sk.25B.5.5OS1 regeneration characteristics, OS1/RS1_A_So, OS1/RS1_A_Sk.26B.6Defect, fault and performance monitoring.27B.6.1Port status management.27B.6.2Defect detection and clearance criteria.27B.6.3Consequent action activation and clearance criteria.28B.6.4Defect correlation.29B.6.5Performance monitoring.29Annex C (normative):ICS proforma for STM-4 optical section layer.30C.1Identification of the implementation.30C.1.1Date of the statement.30C.1.2IUT identification.30C.1.3SUT identification.30C.1.4Product supplier.31C.1.5Client.31C.1.6ICS contact person.32SIST EN 300 417-2-2 V1.1.4:2003



ETSIEN 300 417-2-2 V1.1.4 (1999-05)4C.2Identification of the EN.32C.3Global statement of conformance of OS4 layer.32C.4OS4 layer description.33C.5OS4 layer transmission tables.34C.5.1OS4 source operating wavelength range, OS4_TT_So.34C.5.2OS4 source spectral characteristics, OS4_TT_So.35C.5.3OS4 source optical characteristics, OS4_TT_So.36C.5.4OS4 receiver characteristics, OS4_TT_Sk.37C.5.5OS4 regeneration characteristics, OS4/RS4_A_So, OS4/RS4_A_Sk.38C.6OS4 layer defect, fault and performance monitoring tables.39C.6.1Port status management.39C.6.2Defect detection and clearance criteria.39C.6.3Consequent action activation and clearance criteria.40C.6.4Defect correlation.41C.6.5Performance monitoring.41Annex D (normative):ICS proforma for STM-16 optical section layer.42D.1Identification of the implementation.42D.1.1Date of the statement.42D.1.2IUT identification.42D.1.3SUT identification.42D.1.4Product supplier.43D.1.5Client.43D.1.6ICS contact person.44D.2Identification of the EN.44D.3Global statement of conformance of OS16 layer.44D.4OS16 layer description.45D.5OS16 layer transmission tables.46D.5.1OS16 source operating wavelength range, OS16_TT_So.46D.5.2OS16 source spectral characteristics, OS16_TT_So.46D.5.3OS16 source optical characteristics, OS16_TT_So.47D.5.4OS16 receiver characteristics, OS16_TT_Sk.48D.5.5OS16 regeneration characteristics, OS16/RS16_A_So, OS16/RS16_A_Sk.49D.6OS16 layer defect, fault and performance monitoring tables.50D.6.1Port status management.50D.6.2Defect detection and clearance criteria.50D.6.3Consequent action activation and clearance criteria.51D.6.4Defect correlation.52D.6.5Performance monitoring.52Annex E (normative):ICS proforma for STM-1 electrical section layer.53E.1Identification of the implementation.53E.1.1Date of the statement.53E.1.2IUT identification.53E.1.3SUT identification.53E.1.4Product supplier.54E.1.5Client.54E.1.6ICS contact person.55SIST EN 300 417-2-2 V1.1.4:2003



ETSIEN 300 417-2-2 V1.1.4 (1999-05)5E.2Identification of the EN.55E.3Global statement of conformance of ES1 layer.55E.4ES1 layer description.56E.5ES1 layer transmission tables.56E.5.1ES1 layer data stream.56E.5.2ES1 layer connection function, ES1_C.56E.5.3ES1 layer trail termination functions, ES1_TT_So and ES1_TT_Sk.57E.5.4ES1 to RS1 adaptation functions, ES1/RS1_A_So and ES1/RS1_A_Sk.58E.6ES1 layer defect, fault and performance monitoring tables.59E.6.1Port status management.59E.6.2Defect detection and clearance criteria.60E.6.3Consequent action activation and clearance criteria.60E.6.4Defect correlation.61E.6.5Performance monitoring.61Annex F (normative):ICS proforma for E4 electrical section layer.62F.1Identification of the implementation.62F.1.1Date of the statement.62F.1.2IUT identification.62F.1.3SUT identification.62F.1.4Product supplier.63F.1.5Client.63F.1.6ICS contact person.64F.2Identification of the EN.64F.3Global statement of conformance of E4 layer.64F.4E4 layer description.65F.5E4 layer transmission tables.65F.5.1E4 layer data stream.65F.5.2E4 layer connection function, E4_C.65F.5.3E4 layer trail termination functions, E4_TT_So and E4_TT_Sk.66F.5.4E4 to P4x adaptation functions, E4/P4x_A_So and E4/P4x_A_Sk.67F.5.5E4to P4e adaptation functions, E4/P4e_A_So and E4/P4e_A_Sk.68F.5.6E4 to P4s adaptation functions, E4/P4s_A_So and E4/P4s_A_Sk.69F.6E4 layer defect, fault and performance monitoring tables.70F.6.1Port status management.70F.6.2Defect detection and clearance criteria.71F.6.3Consequent action activation and clearance criteria.71F.6.4Defect correlation.72Annex G (normative):ICS proforma for E31 electrical section layer.73G.1Identification of the implementation.73G.1.1Date of the statement.73G.1.2IUT identification.73G.1.3SUT identification.73G.1.4Product supplier.74G.1.5Client.74G.1.6ICS contact person.75SIST EN 300 417-2-2 V1.1.4:2003



ETSIEN 300 417-2-2 V1.1.4 (1999-05)6G.2Identification of the EN.75G.3Global statement of conformance of E31 layer.75G.4E31 layer description.76G.5E31 layer transmission tables.76G.5.1E31 layer data stream.76G.5.2E31 layer connection function, E31_C.76G.5.3E31 layer trail termination functions, E31_TT_So and E31_TT_Sk.77G.5.4E31 to P31x adaptation functions, E31/P31x_A_So and E31/P31x_A_Sk.78G.5.5E31to P31e adaptation functions, E31/P31e_A_So and E31/P31e_A_Sk.79G.5.6E31 to P31s adaptation functions, E31/P31s_A_So and E31/P31s_A_Sk.80G.6E31 layer defect, fault and performance monitoring tables.81G.6.1Port status management.81G.6.2Defect detection and clearance criteria.82G.6.3Consequent action activation and clearance criteria.82G.6.4Defect correlation.83Annex H (normative):ICS proforma for E22 electrical section layer.84H.1Identification of the implementation.84H.1.1Date of the statement.84H.1.2IUT identification.84H.1.3SUT identification.84H.1.4Product supplier.85H.1.5Client.85H.1.6ICS contact person.86H.2Identification of the EN.86H.3Global statement of conformance of E22 layer.86H.4E22 layer description.87H.5E22 layer transmission tables.87H.5.1E22 layer data stream.87H.5.2E22 layer connection function, E22_C.87H.5.3E22 layer trail termination functions, E22_TT_So and E22_TT_Sk.88H.5.4E22 to P22x adaptation functions, E22/P22x_A_So and E22/P22x_A_Sk.89H.5.5E22to P22e adaptation functions, E22/P22e_A_So and E22/P22e_A_Sk.90H.6E22 layer defect, fault and performance monitoring tables.91H.6.1Port status management.91H.6.2Defect detection and clearance criteria.91H.6.3Consequent action activation and clearance criteria.92H.6.4Defect correlation.93Annex J (normative):ICS proforma for E12 electrical section layer.94J.1Identification of the implementation.94J.1.1Date of the statement.94J.1.2IUT identification.94J.1.3SUT identification.94J.1.4Product supplier.95J.1.5Client.95J.1.6ICS contact person.96SIST EN 300 417-2-2 V1.1.4:2003



ETSIEN 300 417-2-2 V1.1.4 (1999-05)7J.2Identification of the EN.96J.3Global statement of conformance of E12 layer.96J.4E12 layer description.97J.5E12 layer transmission tables.97J.5.1E12 layer data stream.
...