ETSI EN 302 561 V1.1.1 (2008-02)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

DEN/ERM-TGDMR-060

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Kopenske mobilne storitve - Radijska oprema, ki uporablja modulacijo s konstantno ali nekonstantno ovojnico in deluje v kanalu pasovne širine 25 kHz, 50 kHz, 100 kHz ali 150 kHz - Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE

General Information

• Status: Published
• Publication Date: 03-Nov-2008
• Technical Committee: ERM TGDMR - Digital Mobile Radio
• Current Stage: 12 - Completion
• Due Date: 07-Mar-2008
• Completion Date: 29-Feb-2008
• Mandate: M/284
• Ref Project: SIST EN 302 561 V1.1.1:2008 - Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land Mobile Service - Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz - Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

Standards Content (Sample)

ETSI EN 302 561 V1.1.1 (2008-02)
Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Land Mobile Service;
Radio equipment using constant or non-constant
envelope modulation operating in a channel bandwidth
of 25 kHz, 50 kHz, 100 kHz or 150 kHz;
Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive

---------------------- Page: 1 ----------------------
2 ETSI EN 302 561 V1.1.1 (2008-02)



Reference
DEN/ERM-TGDMR-060
Keywords
data, mobile, radio, PMR
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 302 561 V1.1.1 (2008-02)
Contents
Intellectual Property Rights.6
Foreword.6
Introduction .6
1 Scope.7
2 References.8
2.1 Normative references.8
2.2 Informative references.8
3 Definitions, symbols and abbreviations .9
3.1 Definitions.9
3.2 Symbols.10
3.3 Abbreviations.10
4 General.11
4.1 Presentation of equipment for testing purposes.11
4.1.1 Choice of model for testing .11
4.1.1.1 Auxiliary test equipment .11
4.1.1.2 Declarations by the provider .11
4.2 Multi-Mode equipment.11
4.3 Testing of equipment that does not have an external 50 Ω RF connector (integral antenna equipment) .11
5 Test conditions, power sources and ambient temperatures .12
5.1 Normal and extreme test conditions .12
5.2 Test power source.12
5.3 Normal test conditions.12
5.3.1 Normal temperature and humidity.12
5.3.2 Normal test power source .12
5.3.2.1 Mains voltage.12
5.3.2.2 Regulated lead-acid battery power sources used on vehicles.12
5.3.2.3 Other power sources.13
5.4 Extreme test conditions .13
5.4.1 Extreme temperatures.13
5.4.2 Extreme test source voltages.13
5.4.2.1 Mains voltage.13
5.4.2.2 Regulated lead-acid battery power sources used on vehicles.13
5.4.2.3 Power sources using other types of batteries.13
5.4.2.4 Other power sources.13
5.5 Procedure for tests at extreme temperatures.14
5.5.1 Procedure for equipment designed for continuous transmission.14
5.5.2 Procedure for equipment designed for intermittent transmission .14
6 General test conditions .14
6.1 Arrangements for test signals applied to the receiver input.14
6.2 Test load (artificial antenna).15
6.3 Test signals (wanted and unwanted signals).15
6.3.1 Transmitter test signals.15
6.3.2 Receiver test signals.15
6.3.3 Transmitter effective radiated power test signal (C1).16
6.4 Encoder.16
6.4.1 Encoder for receiver measurements.16
6.4.2 Encoder for transmitter measurements .16
6.5 Transceiver data interface.16
6.6 Impedance.16
6.7 PEP.16
6.8 Duplex equipment.17
6.9 Modes of operation of the transmitter .17
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 302 561 V1.1.1 (2008-02)
6.10 Measurement filter definition.17
7 Technical characteristics of the transmitter.17
7.1 Transmitter output power (conducted) .17
7.1.1 Definitions.17
7.1.2 Method of measurement.18
7.1.3 Limits.18
7.2 Maximum effective radiated power.18
7.2.1 Definition.18
7.2.2 Method of measurement.18
7.2.2.1 Evaluation of CW-to-PEP correction factor for signal C1 .18
7.2.2.2 Measurements on a test site.19
7.2.3 Limit.19
7.3 Adjacent and alternate channel power.20
7.3.1 Definition.20
7.3.2 Method of measurement.21
7.3.3 Limits.22
7.4 Unwanted emissions in the spurious domain.22
7.4.1 Definition.22
7.4.2 Method of measuring the power level .23
7.4.2.1 Measurement options.23
7.4.2.2 Method of measuring conducted spurious emissions (clause 7.4.2.1 a)) .23
7.4.2.3 Method of measuring the effective radiated power (clause 7.4.2.1 b)) .23
7.4.2.4 Method of measuring the effective radiated power (clause 7.4.2.1 c)) .25
7.4.2.5 Method of measuring wideband noise.25
7.4.3 Limits.26
7.4.3.1 Spurious emissions power.26
7.4.3.2 Wideband noise power.26
7.5 Intermodulation attenuation.28
7.5.1 Definition.28
7.5.2 Method of measurement.28
7.5.3 Limits.29
7.6 Adjacent channel transient power measurements.29
7.6.1 Definition.29
7.6.2 Method of Measurement.29
7.6.3 Limits.30
7.7 Frequency error.30
7.7.1 Definition.30
7.7.2 Method of measurement.30
7.7.3 Limits.31
8 Technical characteristics of the receiver .31
8.1 Receiver sensitivity (conducted) .31
8.1.1 Definition.31
8.1.2 Method of measurement.31
8.1.2.1 Method of measurement with continuous bit streams.31
8.1.2.2 Method of measurement with messages or packets .32
8.1.3 Limits.32
8.2 Maximum usable sensitivity (field strength) .33
8.2.1 Definition.33
8.2.2 Method of measurement.33
8.2.2.1 Method of measurement with continuous bit streams.33
8.2.2.2 Method of measurement with messages.34
8.2.3 Limits.35
8.3 Blocking or desensitization .37
8.3.1 Definition.37
8.3.2 Method of measurement.37
8.3.2.1 Method of measurement with continuous transmissions.37
8.3.2.2 Method of measurement with messages.38
8.3.3 Limits.39
8.4 Adjacent channel selectivity.39
8.4.1 Definition.39
ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 302 561 V1.1.1 (2008-02)
8.4.2 Method of measurement.39
8.4.2.1 Method of measurement (with continuous bit stream).39
8.4.2.2 Method of measurement with messages.40
8.4.3 Limits.40
8.5 Spurious radiations.41
8.5.1 Definition.41
8.5.2 Methods of measurement.41
8.5.2.1 Method of measuring the power level in a specified load (clause 8.5.1 a)) .41
8.5.2.2 Method of measuring the effective radiated power (clause 8.5.1 b)) .41
8.5.2.3 Method of measuring the effective radiated power (clause 8.5.1 c)) .43
8.5.3 Limits.43
8.6 Co-channel rejection.43
8.6.1 Definition.43
8.6.2 Method of measurement.44
8.6.2.1 Method of measurement with continuous bit streams.44
8.6.2.2 Method of measurement with messages (or packets).45
8.6.3 Limits.45
8.7 Intermodulation response rejection .46
8.7.1 Definition.46
8.7.2 Method of measurement.46
8.7.2.1 Method of measurement (with continuous bit stream).46
8.7.2.2 Method of measurement with messages.47
8.7.3 Limit.48
9 Measurement uncertainty .48
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).49
Annex B (normative): Radiated measurement.51
B.1 Test sites and general arrangements for measurements involving the use of radiated fields .51
B.1.1 Anechoic chamber.51
B.1.2 Anechoic chamber with a conductive ground plane.52
B.1.3 Open Area Test Site (OATS) .53
B.1.4 Test antenna.54
B.1.5 Substitution antenna.55
B.1.6 Measuring antenna.55
B.2 Guidance on the use of radiation test sites .55
B.2.1 Verification of the test site .55
B.2.2 Preparation of the EUT.55
B.2.3 Power supplies to the EUT.55
B.2.4 Range length.56
B.2.5 Site preparation.56
B.3 Coupling of signals.57
B.3.1 General.57
B.3.2 Data signals.57
Annex C (normative): Spectrum analyser specification .58
Annex D (informative): The EN title in the official languages .59
Annex E (informative): Bibliography.61
History .62

ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 302 561 V1.1.1 (2008-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC are given in annex A.

National transposition dates
Date of adoption of this EN: 22 February 2008
Date of latest announcement of this EN (doa): 31 May 2008
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 November 2008
Date of withdrawal of any conflicting National Standard (dow): 30 November 2009

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 (see bibliography).
ETSI

---------------------- Page: 6 ----------------------
7 ETSI EN 302 561 V1.1.1 (2008-02)
1 Scope
The present document covers the technical requirements for radio transmitters and receivers used in stations in the
Private Mobile Radio (PMR) service.
It applies to use in the land mobile service, operating on ra
...

Final draft ETSI EN 302 561 V1.1.1 (2007-12)
Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Land Mobile Service;
Radio equipment using constant or non-constant
envelope modulation operating in a channel bandwidth
of 25 kHz, 50 kHz, 100 kHz or 150 kHz;
Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive

---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 302 561 V1.1.1 (2007-12)



Reference
DEN/ERM-TGDMR-060
Keywords
data, mobile, radio, PMR
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2007.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 302 561 V1.1.1 (2007-12)
Contents
Intellectual Property Rights.6
Foreword.6
Introduction .6
1 Scope.7
2 References.8
2.1 Normative references.8
2.2 Informative references.8
3 Definitions, symbols and abbreviations .9
3.1 Definitions.9
3.2 Symbols.10
3.3 Abbreviations.10
4 General.11
4.1 Presentation of equipment for testing purposes.11
4.1.1 Choice of model for testing .11
4.1.1.1 Auxiliary test equipment .11
4.1.1.2 Declarations by the provider .11
4.2 Multi-Mode equipment.11
4.3 Testing of equipment that does not have an external 50 Ω RF connector (integral antenna equipment) .11
5 Test conditions, power sources and ambient temperatures .12
5.1 Normal and extreme test conditions .12
5.2 Test power source.12
5.3 Normal test conditions.12
5.3.1 Normal temperature and humidity.12
5.3.2 Normal test power source .12
5.3.2.1 Mains voltage.12
5.3.2.2 Regulated lead-acid battery power sources used on vehicles.12
5.3.2.3 Other power sources.13
5.4 Extreme test conditions .13
5.4.1 Extreme temperatures.13
5.4.2 Extreme test source voltages.13
5.4.2.1 Mains voltage.13
5.4.2.2 Regulated lead-acid battery power sources used on vehicles.13
5.4.2.3 Power sources using other types of batteries.13
5.4.2.4 Other power sources.13
5.5 Procedure for tests at extreme temperatures.14
5.5.1 Procedure for equipment designed for continuous transmission.14
5.5.2 Procedure for equipment designed for intermittent transmission .14
6 General test conditions .14
6.1 Arrangements for test signals applied to the receiver input.14
6.2 Test load (artificial antenna).15
6.3 Test signals (wanted and unwanted signals).15
6.3.1 Transmitter test signals.15
6.3.2 Receiver test signals.15
6.3.3 Transmitter effective radiated power test signal (C1).16
6.4 Encoder.16
6.4.1 Encoder for receiver measurements.16
6.4.2 Encoder for transmitter measurements .16
6.5 Transceiver data interface.16
6.6 Impedance.16
6.7 PEP.16
6.8 Duplex equipment.17
6.9 Modes of operation of the transmitter .17
ETSI

---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 302 561 V1.1.1 (2007-12)
6.10 Measurement filter definition.17
7 Technical characteristics of the transmitter.17
7.1 Transmitter output power (conducted) .17
7.1.1 Definitions.17
7.1.2 Method of measurement.18
7.1.3 Limits.18
7.2 Maximum effective radiated power.18
7.2.1 Definition.18
7.2.2 Method of measurement.18
7.2.2.1 Evaluation of CW-to-PEP correction factor for signal C1 .18
7.2.2.2 Measurements on a test site.19
7.2.3 Limit.19
7.3 Adjacent and alternate channel power.20
7.3.1 Definition.20
7.3.2 Method of measurement.21
7.3.3 Limits.22
7.4 Unwanted emissions in the spurious domain.22
7.4.1 Definition.22
7.4.2 Method of measuring the power level .23
7.4.2.1 Measurement options.23
7.4.2.2 Method of measuring conducted spurious emissions (clause 7.4.2.1 a)) .23
7.4.2.3 Method of measuring the effective radiated power (clause 7.4.2.1 b)) .23
7.4.2.4 Method of measuring the effective radiated power (clause 7.4.2.1 c)) .25
7.4.2.5 Method of measuring wideband noise.25
7.4.3 Limits.26
7.4.3.1 Spurious emissions power.26
7.4.3.2 Wideband noise power.26
7.5 Intermodulation attenuation.28
7.5.1 Definition.28
7.5.2 Method of measurement.28
7.5.3 Limits.29
7.6 Adjacent channel transient power measurements.29
7.6.1 Definition.29
7.6.2 Method of Measurement.29
7.6.3 Limits.30
7.7 Frequency error.30
7.7.1 Definition.30
7.7.2 Method of measurement.30
7.7.3 Limits.31
8 Technical characteristics of the receiver .31
8.1 Receiver sensitivity (conducted) .31
8.1.1 Definition.31
8.1.2 Method of measurement.31
8.1.2.1 Method of measurement with continuous bit streams.31
8.1.2.2 Method of measurement with messages or packets .32
8.1.3 Limits.32
8.2 Maximum usable sensitivity (field strength) .33
8.2.1 Definition.33
8.2.2 Method of measurement.33
8.2.2.1 Method of measurement with continuous bit streams.33
8.2.2.2 Method of measurement with messages.34
8.2.3 Limits.35
8.3 Blocking or desensitization .36
8.3.1 Definition.36
8.3.2 Method of measurement.37
8.3.2.1 Method of measurement with continuous transmissions.37
8.3.2.2 Method of measurement with messages.38
8.3.3 Limits.38
8.4 Adjacent channel selectivity.39
8.4.1 Definition.39
ETSI

---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 302 561 V1.1.1 (2007-12)
8.4.2 Method of measurement.39
8.4.2.1 Method of measurement (with continuous bit stream).39
8.4.2.2 Method of measurement with messages.40
8.4.3 Limits.40
8.5 Spurious radiations.41
8.5.1 Definition.41
8.5.2 Methods of measurement.41
8.5.2.1 Method of measuring the power level in a specified load (clause 8.5.1 a)) .41
8.5.2.2 Method of measuring the effective radiated power (clause 8.5.1 b)) .41
8.5.2.3 Method of measuring the effective radiated power (clause 8.5.1 c)) .42
8.5.3 Limits.43
8.6 Co-channel rejection.43
8.6.1 Definition.43
8.6.2 Method of measurement.43
8.6.2.1 Method of measurement with continuous bit streams.43
8.6.2.2 Method of measurement with messages (or packets).44
8.6.3 Limits.45
8.7 Intermodulation response rejection .45
8.7.1 Definition.45
8.7.2 Method of measurement.45
8.7.2.1 Method of measurement (with continuous bit stream).45
8.7.2.2 Method of measurement with messages.46
8.7.3 Limit.47
9 Measurement uncertainty .47
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).49
Annex B (normative): Radiated measurement.51
B.1 Test sites and general arrangements for measurements involving the use of radiated fields .51
B.1.1 Anechoic chamber.51
B.1.2 Anechoic chamber with a conductive ground plane.52
B.1.3 Open Area Test Site (OATS) .53
B.1.4 Test antenna.54
B.1.5 Substitution antenna.55
B.1.6 Measuring antenna.55
B.2 Guidance on the use of radiation test sites .55
B.2.1 Verification of the test site .55
B.2.2 Preparation of the EUT.55
B.2.3 Power supplies to the EUT.55
B.2.4 Range length.56
B.2.5 Site preparation.56
B.3 Coupling of signals.57
B.3.1 General.57
B.3.2 Data signals.57
Annex C (normative): Spectrum analyser specification .58
Annex D (informative): The EN title in the official languages .59
Annex E (informative): Bibliography.60
History .61

ETSI

---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 302 561 V1.1.1 (2007-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards Two-step Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
Technical specifications relevant to Directive 1999/5/EC are given in annex A.

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 (see bibliography).
ETSI

---------------------- Page: 6 ----------------------
7 Final draft ETSI EN 302 561 V1.1.1 (2007-12)
1 Scope
The present document covers the technical requ
...

SLOVENSKI STANDARD
SIST EN 302 561 V1.1.1:2008
01-september-2008
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
.RSHQVNHPRELOQHVWRULWYH5DGLMVNDRSUHPDNLXSRUDEOMDPRGXODFLMRV
NRQVWDQWQRDOLQHNRQVWDQWQRRYRMQLFRLQGHOXMHYNDQDOXSDVRYQHãLULQHN+]
N+]N+]DOLN+]+DUPRQL]LUDQL(1NL]DMHPDELVWYHQH]DKWHYHþOHQD
GLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land Mobile Service
- Radio equipment using constant or non-constant envelope modulation operating in a
channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz - Harmonized EN covering
essential requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 302 561 Version 1.1.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.070.01 Mobilni servisi na splošno Mobile services in general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 302 561 V1.1.1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 302 561 V1.1.1:2008

---------------------- Page: 2 ----------------------

SIST EN 302 561 V1.1.1:2008

ETSI EN 302 561 V1.1.1 (2008-02)
Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Land Mobile Service;
Radio equipment using constant or non-constant
envelope modulation operating in a channel bandwidth
of 25 kHz, 50 kHz, 100 kHz or 150 kHz;
Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive

---------------------- Page: 3 ----------------------

SIST EN 302 561 V1.1.1:2008
 2 ETSI EN 302 561 V1.1.1 (2008-02)



Reference
DEN/ERM-TGDMR-060
Keywords
data, mobile, radio, PMR
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 302 561 V1.1.1:2008
 3 ETSI EN 302 561 V1.1.1 (2008-02)
Contents
Intellectual Property Rights.6
Foreword.6
Introduction .6
1 Scope.7
2 References.8
2.1 Normative references.8
2.2 Informative references.8
3 Definitions, symbols and abbreviations .9
3.1 Definitions.9
3.2 Symbols.10
3.3 Abbreviations.10
4 General.11
4.1 Presentation of equipment for testing purposes.11
4.1.1 Choice of model for testing .11
4.1.1.1 Auxiliary test equipment .11
4.1.1.2 Declarations by the provider .11
4.2 Multi-Mode equipment.11
4.3 Testing of equipment that does not have an external 50 Ω RF connector (integral antenna equipment) .11
5 Test conditions, power sources and ambient temperatures .12
5.1 Normal and extreme test conditions .12
5.2 Test power source.12
5.3 Normal test conditions.12
5.3.1 Normal temperature and humidity.12
5.3.2 Normal test power source .12
5.3.2.1 Mains voltage.12
5.3.2.2 Regulated lead-acid battery power sources used on vehicles.12
5.3.2.3 Other power sources.13
5.4 Extreme test conditions .13
5.4.1 Extreme temperatures.13
5.4.2 Extreme test source voltages.13
5.4.2.1 Mains voltage.13
5.4.2.2 Regulated lead-acid battery power sources used on vehicles.13
5.4.2.3 Power sources using other types of batteries.13
5.4.2.4 Other power sources.13
5.5 Procedure for tests at extreme temperatures.14
5.5.1 Procedure for equipment designed for continuous transmission.14
5.5.2 Procedure for equipment designed for intermittent transmission .14
6 General test conditions .14
6.1 Arrangements for test signals applied to the receiver input.14
6.2 Test load (artificial antenna).15
6.3 Test signals (wanted and unwanted signals).15
6.3.1 Transmitter test signals.15
6.3.2 Receiver test signals.15
6.3.3 Transmitter effective radiated power test signal (C1).16
6.4 Encoder.16
6.4.1 Encoder for receiver measurements.16
6.4.2 Encoder for transmitter measurements .16
6.5 Transceiver data interface.16
6.6 Impedance.16
6.7 PEP.16
6.8 Duplex equipment.17
6.9 Modes of operation of the transmitter .17
ETSI

---------------------- Page: 5 ----------------------

SIST EN 302 561 V1.1.1:2008
 4 ETSI EN 302 561 V1.1.1 (2008-02)
6.10 Measurement filter definition.17
7 Technical characteristics of the transmitter.17
7.1 Transmitter output power (conducted) .17
7.1.1 Definitions.17
7.1.2 Method of measurement.18
7.1.3 Limits.18
7.2 Maximum effective radiated power.18
7.2.1 Definition.18
7.2.2 Method of measurement.18
7.2.2.1 Evaluation of CW-to-PEP correction factor for signal C1 .18
7.2.2.2 Measurements on a test site.19
7.2.3 Limit.19
7.3 Adjacent and alternate channel power.20
7.3.1 Definition.20
7.3.2 Method of measurement.21
7.3.3 Limits.22
7.4 Unwanted emissions in the spurious domain.22
7.4.1 Definition.22
7.4.2 Method of measuring the power level .23
7.4.2.1 Measurement options.23
7.4.2.2 Method of measuring conducted spurious emissions (clause 7.4.2.1 a)) .23
7.4.2.3 Method of measuring the effective radiated power (clause 7.4.2.1 b)) .23
7.4.2.4 Method of measuring the effective radiated power (clause 7.4.2.1 c)) .25
7.4.2.5 Method of measuring wideband noise.25
7.4.3 Limits.26
7.4.3.1 Spurious emissions power.26
7.4.3.2 Wideband noise power.26
7.5 Intermodulation attenuation.28
7.5.1 Definition.28
7.5.2 Method of measurement.28
7.5.3 Limits.29
7.6 Adjacent channel transient power measurements.29
7.6.1 Definition.29
7.6.2 Method of Measurement.29
7.6.3 Limits.30
7.7 Frequency error.30
7.7.1 Definition.30
7.7.2 Method of measurement.30
7.7.3 Limits.31
8 Technical characteristics of the receiver .31
8.1 Receiver sensitivity (conducted) .31
8.1.1 Definition.31
8.1.2 Method of measurement.31
8.1.2.1 Method of measurement with continuous bit streams.31
8.1.2.2 Method of measurement with messages or packets .32
8.1.3 Limits.32
8.2 Maximum usable sensitivity (field strength) .33
8.2.1 Definition.33
8.2.2 Method of measurement.33
8.2.2.1 Method of measurement with continuous bit streams.33
8.2.2.2 Method of measurement with messages.34
8.2.3 Limits.35
8.3 Blocking or desensitization .37
8.3.1 Definition.37
8.3.2 Method of measurement.37
8.3.2.1 Method of measurement with continuous transmissions.37
8.3.2.2 Method of measurement with messages.38
8.3.3 Limits.39
8.4 Adjacent channel selectivity.39
8.4.1 Definition.39
ETSI

---------------------- Page: 6 ----------------------

SIST EN 302 561 V1.1.1:2008
 5 ETSI EN 302 561 V1.1.1 (2008-02)
8.4.2 Method of measurement.39
8.4.2.1 Method of measurement (with continuous bit stream).39
8.4.2.2 Method of measurement with messages.40
8.4.3 Limits.40
8.5 Spurious radiations.41
8.5.1 Definition.41
8.5.2 Methods of measurement.41
8.5.2.1 Method of measuring the power level in a specified load (clause 8.5.1 a)) .41
8.5.2.2 Method of measuring the effective radiated power (clause 8.5.1 b)) .41
8.5.2.3 Method of measuring the effective radiated power (clause 8.5.1 c)) .43
8.5.3 Limits.43
8.6 Co-channel rejection.43
8.6.1 Definition.43
8.6.2 Method of measurement.44
8.6.2.1 Method of measurement with continuous bit streams.44
8.6.2.2 Method of measurement with messages (or packets).45
8.6.3 Limits.45
8.7 Intermodulation response rejection .46
8.7.1 Definition.46
8.7.2 Method of measurement.46
8.7.2.1 Method of measurement (with continuous bit stream).46
8.7.2.2 Method of measurement with messages.47
8.7.3 Limit.48
9 Measurement uncertainty .48
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).49
Annex B (normative): Radiated measurement.51
B.1 Test sites and general arrangements for measurements involving the use of radiated fields .51
B.1.1 Anechoic chamber.51
B.1.2 Anechoic chamber with a conductive ground plane.52
B.1.3 Open Area Test Site (OATS) .53
B.1.4 Test antenna.54
B.1.5 Substitution antenna.55
B.1.6 Measuring antenna.55
B.2 Guidance on the use of radiation test sites .55
B.2.1 Verification of the test site .55
B.2.2 Preparation of the EUT.55
B.2.3 Power supplies to the EUT.55
B.2.4 Range length.56
B.2.5 Site preparation.56
B.3 Coupling of signals.57
B.3.1 General.57
B.3.2 Data signals.57
Annex C (normative): Spectrum analyser specification .58
Annex D (informative): The EN title in the official languages .59
Annex E (informative): Bibliography.61
History .62

ETSI

---------------------- Page: 7 ----------------------

SIST EN 302 561 V1.1.1:2008
 6 ETSI EN 302 561 V1.1.1 (2008-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provisio
...