ETSI TS 102 412 V18.2.0 (2024-12)

Smart Cards; Smart Card Platform Requirements Stage 1 (Release 18)

RTS/SET-R102412vi20

General Information

• Status: Not Published
• Technical Committee: SET REQ - SET-REQ
• Current Stage: 12 - Citation in the OJ (auto-insert)
• Due Date: 16-Dec-2024
• Completion Date: 03-Dec-2024

Standards Content (Sample)

TECHNICAL SPECIFICATION
Smart Cards;
Smart Card Platform Requirements Stage 1
(Release 18)
Release 18 2 ETSI TS 102 412 V18.2.0 (2024-12)

Reference
RTS/SET-R102412vi20
Keywords
SIM, smart card, test, UICC
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
Release 18 3 ETSI TS 102 412 V18.2.0 (2024-12)
Contents
Intellectual Property Rights . 11
Foreword . 11
Modal verbs terminology . 12
Introduction . 12
1 Scope . 13
2 References . 13
2.1 Normative references . 13
2.2 Informative references . 14
3 Definition of terms, symbols and abbreviations . 15
3.1 Terms . 15
3.2 Symbols . 18
3.3 Abbreviations . 18
4 Requirements . 21
4.0 General . 21
4.1 Run time environment timing constraints . 22
4.1.1 Abstract (informative) . 22
4.1.2 Background (informative) . 22
4.1.2.1 Use case - Network authentication . 22
4.1.3 Requirements . 23
4.1.4 Interaction with existing features (informative) . 23
4.2 Launch Application feature . 23
4.2.1 Abstract (informative) . 23
4.2.2 Background (informative) . 23
4.2.3 Requirements . 24
4.2.4 Interaction with existing features (informative) . 24
4.3 Mapped file support on the UICC . 24
4.3.1 Abstract (informative) . 24
4.3.2 Background (informative) . 25
4.3.3 Requirements . 25
4.3.4 Interaction with existing features (informative) . 25
4.4 Extension of logical channels . 25
4.4.1 Abstract (informative) . 25
4.4.2 Background (informative) . 25
4.4.2.1 Typical problem situation . 25
4.4.2.2 Possible problem solution . 26
4.4.2.3 Use cases . 26
4.4.2.3.1 Use case - JSR 177 applications . 26
4.4.2.3.2 Use case - PC connection . 26
4.4.3 Requirements . 26
4.4.3.1 General requirements . 26
4.4.3.2 Backward compatibility requirements. 26
4.4.4 Interaction with existing features (informative) . 26
4.5 Secure channel to secure local terminal interfaces . 26
4.5.1 Abstract (informative) . 26
4.5.2 Background (informative) . 27
4.5.2.0 General . 27
4.5.2.1 Use case - User interface . 27
4.5.2.2 Use case - UICC as a control point for device management . 28
4.5.2.3 Use case - DRM and distributed applications . 29
4.5.2.4 Use case - Toolkit commands protection . 30
4.5.3 Requirements . 31
4.5.3.0 General . 31
4.5.3.1 End point requirements . 31
4.5.3.2 Integrity requirements . 31
ETSI
Release 18 4 ETSI TS 102 412 V18.2.0 (2024-12)
4.5.3.3 Confidentiality requirements . 31
4.5.3.4 Authentication requirements . 32
4.5.3.5 Audit/Compliance requirements . 32
4.5.3.6 Policy requirements . 32
4.5.3.7 Transport Protocol requirements . 32
4.5.4 Interaction with existing features (informative) . 32
4.5.4.1 Logical Channels . 32
4.5.4.2 CAT access over a modem interface . 32
4.6 Authenticate command longer than 255 bytes. 32
4.6.1 Abstract (informative) . 32
4.6.2 Background (informative) . 33
4.6.2.1 Use case - EAP packet exchange . 33
4.6.3 Requirements . 33
4.6.3.1 General requirements . 33
4.6.3.2 Backward compatibility requirements. 33
4.6.4 Interaction with existing features (informative) . 33
4.7 CAT mechanisms to indicate the bearer connection status . 33
4.7.1 Abstract (informative) . 33
4.7.2 Background (informative) . 33
4.7.2.1 Use case - Availability of network bearers . 33
4.7.2.2 Use case - Network connection temporarily lost . 34
4.7.2.3 Use case - Availability of local bearers . 34
4.7.3 Requirements .
...