Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 10: Harmonized EN for IMT-2000 FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R&TTE Directive

DEN/DECT-A0175

Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Bazne postaje (BS) in uporabniška oprema (UE) za celično omrežje IMT-2000 tretje generacije - 10. del: Harmonizirani EN za IMT-2000, FDMA/TDMA (DECT), ki zajema bistvene zahteve člena 3.2 direktive R&TTE

General Information

Status
Published
Publication Date
16-Jan-2002
Current Stage
12 - Completion
Due Date
11-Jan-2002
Completion Date
17-Jan-2002
Mandate

Buy Standard

Standard
P EN 301 908-10:2002
English language
120 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN 301 908-10:2002
English language
120 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 10: Harmonized EN for IMT-2000 FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 908-10 Version 1.1.136IST EN 301 908-10:2002en01-VHSWHPEHU-20023SIST EN 301 908-10:2002SLOVENSKI
STANDARD



SIST EN 301 908-10:2002



ETSI EN 301 908-10 V1.1.1 (2002-01)Candidate Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Base Stations (BS) and User Equipment (UE) forIMT-2000 Third-Generation cellular networks;Part 10: Harmonized EN for IMT-2000,FDMA/TDMA (DECT)covering essential requirementsof article 3.2 of the R&TTE Directive SIST EN 301 908-10:2002



ETSI ETSI EN 301 908-10 V1.1.1 (2002-01)2
Reference DEN/DECT-A0175 Keywords 3G, DECT, digital, generic, IMT-2000, radio, regulation, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2002. All rights reserved.
SIST EN 301 908-10:2002



ETSI ETSI EN 301 908-10 V1.1.1 (2002-01)3 Contents Intellectual Property Rights.10 Foreword.10 Introduction.12 1 Scope.14 2 References.14 3 Definitions and abbreviations.15 3.1 Definitions.15 3.2 Abbreviations.18 4 Technical requirements specifications.19 4.1 Environmental profile.19 4.2 Document layout.19 4.2.1 Test suites.19 4.2.2 Test groups.19 4.2.3 Test cases.20 4.3 Applicant's declaration.20 4.4 Applicability of essential test suites.20 4.4.1 Introduction.20 4.4.2 Equipment that includes only a DECT RF receiver.21 4.4.3 Equipment that includes a radio transmitter.21 4.4.4 CTAs.21 4.4.5 Equipment with a synchronization port.21 4.4.6 Equipment incorporating the IPEI (PPs only).21 4.4.7 All FP equipment.21 4.4.8 Equipment with combined FT and PT functionality.21 4.4.8.1 Introduction.21 4.4.8.2 Wireless Relay Station.21 4.4.8.3 Direct PP to PP communication.22 4.4.8.4 Distributed Communications.22 4.4.9 Provision of 2 Mbit/s services.
Equipment that is capable of using 4-level and/or 8-level modulation.22 4.4.10 Dual mode handsets.22 4.5 Conformance requirements.22 4.5.1 General.22 4.5.2 Accuracy and stability of RF carriers.23 4.5.2.1 Definition of nominal position of RF carriers.23 4.5.2.2 Limits.23 4.5.2.3 Conformance.23 4.5.3 Accuracy and stability of timing parameters.23 4.5.3.1 Definitions.23 4.5.3.1.1 Slot structure.23 4.5.3.1.2 Definition of the position of p0.24 4.5.3.2 Limits.24 4.5.3.2.1 Reference timer accuracy and stability.24 4.5.3.2.2 RFP transmission jitter.25 4.5.3.2.3 PP reference timer synchronization.25 4.5.3.3 Conformance.25 4.5.4 Transmission burst.26 4.5.4.1 Definitions.26 4.5.4.1.1 Introduction.26 4.5.4.1.2 Physical packets.26 4.5.4.1.3 Transmitted power.26 4.5.4.1.4 Normal Transmitted Power (NTP).26 4.5.4.1.5 Transmitter attack time.26 4.5.4.1.6 Transmitter release time.26 SIST EN 301 908-10:2002



ETSI ETSI EN 301 908-10 V1.1.1 (2002-01)4 4.5.4.1.7 Minimum power.26 4.5.4.1.8 Maximum power.27 4.5.4.1.9 Maintenance of transmission after packet end.27 4.5.4.1.10 Transmitter idle power output.27 4.5.4.2 Limits.27 4.5.4.2.1 Transmitter attack time.27 4.5.4.2.2 Transmitter release time.27 4.5.4.2.3 Minimum power.27 4.5.4.2.4 Maximum power.27 4.5.4.2.5 Maintenance of transmission after packet end.27 4.5.4.2.6 Transmitter idle power output.27 4.5.4.3 Conformance.27 4.5.5 Transmitted power.28 4.5.5.1 Definitions.28 4.5.5.1.1 PP and RFP with an integral antenna.28 4.5.5.1.2 PP and RFP with external connections for all antennas.28 4.5.5.1.3 PP and RFP with both integral and external antennas.28 4.5.5.2 Limits.28 4.5.5.3 Conformance.28 4.5.6 RF carrier modulation.28 4.5.6.1 Definition.28 4.5.6.2 Limits.29 4.5.6.3 Conformance.29 4.5.7 Unwanted RF power radiation.29 4.5.7.1 General.29 4.5.7.2 Emissions due to modulation.29 4.5.7.2.1 Definition.29 4.5.7.2.2 Limits.30 4.5.7.2.3 Conformance.30 4.5.7.3 Emissions due to transmitter transients.30 4.5.7.3.1 Definition.30 4.5.7.3.2 Limits.30 4.5.7.3.3 Conformance.30 4.5.7.4 Emissions due to intermodulation.31 4.5.7.4.1 Definition.31 4.5.7.4.2 Limits.31 4.5.7.4.3 Conformance.31 4.5.7.5 Spurious emissions when allocated a transmit channel.31 4.5.7.5.1 Definition.31 4.5.7.5.2 Limits.31 4.5.7.5.3 Conformance.31 4.5.8 Radio receiver testing.31 4.5.8.1 Radio receiver sensitivity.31 4.5.8.1.1 Definition.31 4.5.8.1.2 Limits.32 4.5.8.1.3 Conformance.32 4.5.8.2 Radio receiver reference BER and FER.32 4.5.8.2.1 Definition.32 4.5.8.2.2 Limits.32 4.5.8.2.3 Conformance.32 4.5.8.3 Radio receiver interference performance.32 4.5.8.3.1 Definition.32 4.5.8.3.2 Limits.33 4.5.8.3.3 Conformance.33 4.5.8.4 Radio receiver blocking case 1: owing to signals occurring at the same time but on other frequencies.33 4.5.8.4.1 Definition.33 4.5.8.4.2 Limits.33 4.5.8.4.3 Conformance.34 4.5.8.5 Radio receiver blocking case 2: owing to signals occurring at a different time.34 4.5.8.5.1 Definition.34 4.5.8.5.2 Limits.34 SIST EN 301 908-10:2002



ETSI ETSI EN 301 908-10 V1.1.1 (2002-01)5 4.5.8.5.3 Conformance.34 4.5.8.6 Receiver intermodulation performance.34 4.5.8.6.1 Definition.34 4.5.8.6.2 Limits.34 4.5.8.6.3 Conformance.34 4.5.8.7 Spurious emissions when the PP has no allocated transmit channel.34 4.5.8.7.1 Definition.34 4.5.8.7.2 Limits.35 4.5.8.7.3 Conformance.35 4.5.9 Intersystem synchronization (FP only).35 4.5.9.1 Description.35 4.5.9.2 Wired synchronization ports.36 4.5.9.2.1 FP as a master.36 4.5.9.2.2 FP as a slave.36 4.5.9.3 GPS synchronization.37 4.5.9.3.1 FP with integrated Global Positioning System (GPS) synchronization.37 4.5.9.3.2 External GPS synchronization device.37 4.5.10 Equipment identity testing.38 4.5.10.1 PP.38 4.5.10.2 FP.38 4.5.11 Efficient use of the radio spectrum.38 4.5.11.1 Channel selection.38 4.5.11.2 Channel confirmation.38 4.5.11.2.1 For the PT.38 4.5.11.2.2 For the FT.38 4.5.11.3 Channel release.39 4.5.11.4 General.39 4.5.12 WRS testing.39 4.5.12.1 General requirements.39 4.5.12.2 Testing as a PP.39 4.5.12.3 Testing as an RFP.40 4.5.12.4 Additional requirements.40 4.5.12.5 Conformance.44 4.5.13 Requirements for PPs with direct PP to PP communication mode.44 4.5.13.1 General requirements.44 4.5.13.2 Setting the EUT in direct communications mode.44 4.5.13.3 When the EUT has not initiated a call.44 4.5.13.4 When the EUT initiates a call.45 4.5.13.5 Conformance.45 4.5.14 Distributed Communications.45 4.5.14.1 General requirements.45 4.5.14.2 Testing as a PP.45 4.5.14.3 Testing as an RFP.46 4.5.14.4 Conformance.46 4.5.15 Higher level modulation options.46 4.5.15.1 Requirements.46 4.5.15.2 Conformance.47 5 Testing for compliance with technical requirements.47 5.1 General test requirements.47 5.1.1 Test philosophy.47 5.1.2 Standard position.48 5.1.3 Test antenna of the LT.48 5.1.4 Substitution antenna.49 5.1.5 Test fixture.49 5.1.5.1 Description.49 5.1.5.2 Calibration of the test fixture for the measurement of transmitter characteristics.49 5.1.5.3 Calibration of the test fixture for the measurement of receiver characteristics.50 5.1.5.4 Mode of use.50 5.1.6 Equipment with a temporary or internal permanent antenna connector.51 5.1.6.1 General.51 5.1.6.2 Equipment with a temporary antenna connector.51 SIST EN 301 908-10:2002



ETSI ETSI EN 301 908-10
...

SLOVENSKI STANDARD
SIST EN 301 908-10:2002
01-november-2002
(OHNWURPDJQHWQD]GUXåOMLYRVW (0& LQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50 
%D]QHSRVWDMH %6 LQXSRUDEQLãNDRSUHPD 8( ]DFHOLþQRRPUHåMH,07WUHWMH
JHQHUDFLMHGHO+DUPRQL]LUDQL(1]D,07)'0$7'0$ '(&7 NL]DMHPD
ELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS)
and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 10:
Harmonized EN for IMT-2000 FDMA/TDMA (DECT) covering essential requirements of
article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 908-10 Version 1.1.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 908-10:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 908-10:2002

---------------------- Page: 2 ----------------------

SIST EN 301 908-10:2002

ETSI EN 301 908-10 V1.1.1 (2002-01)
Candidate Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Base Stations (BS) and User Equipment (UE) for
IMT-2000 Third-Generation cellular networks;
Part 10: Harmonized EN for IMT-2000,
FDMA/TDMA (DECT)
covering essential requirements
of article 3.2 of the R&TTE Directive

---------------------- Page: 3 ----------------------

SIST EN 301 908-10:2002
 2 ETSI EN 301 908-10 V1.1.1 (2002-01)



Reference
DEN/DECT-A0175
Keywords
3G, DECT, digital, generic, IMT-2000, radio,
regulation, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2002.
All rights reserved.

ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 908-10:2002
 3 ETSI EN 301 908-10 V1.1.1 (2002-01)
Contents
Intellectual Property Rights.10
Foreword.10
Introduction .12
1 Scope.14
2 References.14
3 Definitions and abbreviations.15
3.1 Definitions.15
3.2 Abbreviations.18
4 Technical requirements specifications.19
4.1 Environmental profile.19
4.2 Document layout.19
4.2.1 Test suites.19
4.2.2 Test groups.19
4.2.3 Test cases.20
4.3 Applicant's declaration.20
4.4 Applicability of essential test suites .20
4.4.1 Introduction.20
4.4.2 Equipment that includes only a DECT RF receiver.21
4.4.3 Equipment that includes a radio transmitter .21
4.4.4 CTAs.21
4.4.5 Equipment with a synchronization port .21
4.4.6 Equipment incorporating the IPEI (PPs only).21
4.4.7 All FP equipment.21
4.4.8 Equipment with combined FT and PT functionality.21
4.4.8.1 Introduction.21
4.4.8.2 Wireless Relay Station .21
4.4.8.3 Direct PP to PP communication.22
4.4.8.4 Distributed Communications.22
4.4.9 Provision of 2 Mbit/s services. Equipment that is capable of using 4-level and/or 8-level modulation .22
4.4.10 Dual mode handsets.22
4.5 Conformance requirements.22
4.5.1 General.22
4.5.2 Accuracy and stability of RF carriers .23
4.5.2.1 Definition of nominal position of RF carriers .23
4.5.2.2 Limits.23
4.5.2.3 Conformance.23
4.5.3 Accuracy and stability of timing parameters .23
4.5.3.1 Definitions.23
4.5.3.1.1 Slot structure.23
4.5.3.1.2 Definition of the position of p0 .24
4.5.3.2 Limits.24
4.5.3.2.1 Reference timer accuracy and stability.24
4.5.3.2.2 RFP transmission jitter .25
4.5.3.2.3 PP reference timer synchronization.25
4.5.3.3 Conformance.25
4.5.4 Transmission burst.26
4.5.4.1 Definitions.26
4.5.4.1.1 Introduction.26
4.5.4.1.2 Physical packets.26
4.5.4.1.3 Transmitted power.26
4.5.4.1.4 Normal Transmitted Power (NTP) .26
4.5.4.1.5 Transmitter attack time.26
4.5.4.1.6 Transmitter release time .26
ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 908-10:2002
 4 ETSI EN 301 908-10 V1.1.1 (2002-01)
4.5.4.1.7 Minimum power.26
4.5.4.1.8 Maximum power.27
4.5.4.1.9 Maintenance of transmission after packet end.27
4.5.4.1.10 Transmitter idle power output .27
4.5.4.2 Limits.27
4.5.4.2.1 Transmitter attack time.27
4.5.4.2.2 Transmitter release time .27
4.5.4.2.3 Minimum power.27
4.5.4.2.4 Maximum power.27
4.5.4.2.5 Maintenance of transmission after packet end.27
4.5.4.2.6 Transmitter idle power output .27
4.5.4.3 Conformance.27
4.5.5 Transmitted power.28
4.5.5.1 Definitions.28
4.5.5.1.1 PP and RFP with an integral antenna .28
4.5.5.1.2 PP and RFP with external connections for all antennas .28
4.5.5.1.3 PP and RFP with both integral and external antennas .28
4.5.5.2 Limits.28
4.5.5.3 Conformance.28
4.5.6 RF carrier modulation.28
4.5.6.1 Definition.28
4.5.6.2 Limits.29
4.5.6.3 Conformance.29
4.5.7 Unwanted RF power radiation.29
4.5.7.1 General.29
4.5.7.2 Emissions due to modulation .29
4.5.7.2.1 Definition.29
4.5.7.2.2 Limits.30
4.5.7.2.3 Conformance.30
4.5.7.3 Emissions due to transmitter transients .30
4.5.7.3.1 Definition.30
4.5.7.3.2 Limits.30
4.5.7.3.3 Conformance.30
4.5.7.4 Emissions due to intermodulation .31
4.5.7.4.1 Definition.31
4.5.7.4.2 Limits.31
4.5.7.4.3 Conformance.31
4.5.7.5 Spurious emissions when allocated a transmit channel.31
4.5.7.5.1 Definition.31
4.5.7.5.2 Limits.31
4.5.7.5.3 Conformance.31
4.5.8 Radio receiver testing .31
4.5.8.1 Radio receiver sensitivity.31
4.5.8.1.1 Definition.31
4.5.8.1.2 Limits.32
4.5.8.1.3 Conformance.32
4.5.8.2 Radio receiver reference BER and FER.32
4.5.8.2.1 Definition.32
4.5.8.2.2 Limits.32
4.5.8.2.3 Conformance.32
4.5.8.3 Radio receiver interference performance .32
4.5.8.3.1 Definition.32
4.5.8.3.2 Limits.33
4.5.8.3.3 Conformance.33
4.5.8.4 Radio receiver blocking case 1: owing to signals occurring at the same time but on other
frequencies .33
4.5.8.4.1 Definition.33
4.5.8.4.2 Limits.33
4.5.8.4.3 Conformance.34
4.5.8.5 Radio receiver blocking case 2: owing to signals occurring at a different time.34
4.5.8.5.1 Definition.34
4.5.8.5.2 Limits.34
ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 908-10:2002
 5 ETSI EN 301 908-10 V1.1.1 (2002-01)
4.5.8.5.3 Conformance.34
4.5.8.6 Receiver intermodulation performance .34
4.5.8.6.1 Definition.34
4.5.8.6.2 Limits.34
4.5.8.6.3 Conformance.34
4.5.8.7 Spurious emissions when the PP has no allocated transmit channel .34
4.5.8.7.1 Definition.34
4.5.8.7.2 Limits.35
4.5.8.7.3 Conformance.35
4.5.9 Intersystem synchronization (FP only) .35
4.5.9.1 Description.35
4.5.9.2 Wired synchronization ports .36
4.5.9.2.1 FP as a master.36
4.5.9.2.2 FP as a slave .36
4.5.9.3 GPS synchronization.37
4.5.9.3.1 FP with integrated Global Positioning System (GPS) synchronization.37
4.5.9.3.2 External GPS synchronization device .37
4.5.10 Equipment identity testing .38
4.5.10.1 PP.38
4.5.10.2 FP.38
4.5.11 Efficient use of the radio spectrum .38
4.5.11.1 Channel selection.38
4.5.11.2 Channel confirmation.38
4.5.11.2.1 For the PT.38
4.5.11.2.2 For the FT.38
4.5.11.3 Channel release.39
4.5.11.4 General.39
4.5.12 WRS testing.39
4.5.12.1 General requirements.39
4.5.12.2 Testing as a PP .39
4.5.12.3 Testing as an RFP .40
4.5.12.4 Additional requirements.40
4.5.12.5 Conformance.44
4.5.13 Requirements for PPs with direct PP to PP communication mode .44
4.5.13.1 General requirements.44
4.5.13.2 Setting the EUT in direct communications mode.44
4.5.13.3 When the EUT has not initiated a call.44
4.5.13.4 When the EUT initiates a call .45
4.5.13.5 Conformance.45
4.5.14 Distributed Communications.45
4.5.14.1 General requirements.45
4.5.14.2 Testing as a PP .45
4.5.14.3 Testing as an RFP .46
4.5.14.4 Conformance.46
4.5.15 Higher level modulation options.46
4.5.15.1 Requirements.46
4.5.15.2 Conformance.47
5 Testing for compliance with technical requirements.47
5.1 General test requirements.47
5.1.1 Test philosophy.47
5.1.2 Standard position.48
5.1.3 Test antenna of the LT .48
5.1.4 Substitution antenna.49
5.1.5 Test fixture.49
5.1.5.1 Description.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.