ETSI EN 300 718-3 V1.2.1 (2004-02)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering essential requirements of article 3.3e of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering essential requirements of article 3.3e of the R&TTE Directive
REN/ERM-TG36-001-3
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Lavinske žolne - Oddajno-sprejemni sistemi - 3. del: Harmonizirani evropski standard (EN), ki zajema bistvene zahteve člena 3.3e direktive R&TTE
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.77(Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering essential requirements of article 3.3e of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipment13.200NDWDVWURIAccident and disaster controlICS:Ta slovenski standard je istoveten z:EN 300 718-3 Version 1.2.1SIST EN 300 718-3 V1.2.1:2004en01-julij-2004SIST EN 300 718-3 V1.2.1:2004SLOVENSKI
STANDARD
SIST EN 300 718-3 V1.2.1:2004
ETSI EN 300 718-3 V1.2.1 (2004-02)Candidate Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Avalanche Beacons;Transmitter-receiver systems;Part 3: Harmonized EN covering essential requirementsof article 3.3e of the R&TTE Directive
SIST EN 300 718-3 V1.2.1:2004
ETSI ETSI EN 300 718-3 V1.2.1 (2004-02) 2
Reference REN/ERM-TG36-001-3 Keywords radio, regulation, safety, SAR, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2004. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 300 718-3 V1.2.1:2004
ETSI ETSI EN 300 718-3 V1.2.1 (2004-02) 3
Contents Intellectual Property Rights.4 Foreword.4 Introduction.5 1 Scope.7 2 References.7 3 Definitions, abbreviations and symbols.8 3.1 Definitions.8 3.2 Abbreviations.8 3.3 Symbols.8 4 Environmental conformance requirement specifications.8 4.1 General.8 4.1.1 Environmental profile.8 4.2 Drop test on hard surface.8 4.2.1 Conformance.8 4.2.2 Requirements.8 4.3 Temperature tests.9 4.3.1 Conformance.9 4.3.2 Requirements.9 4.4 Immersion test.9 4.4.1 Conformance.9 4.4.2 Requirements.9 5 Technical conformance requirements specifications.9 5.1 General.9 5.1.1 Operational Requirements.9 5.2 Conformance requirements.10 5.2.1 Maintaining the transmit mode.10 5.2.2 Battery check.10 5.2.3 Minimum output field strength (H-field).10 5.2.3.1 Definition.10 5.2.3.2 Conformance.10 5.2.3.3 Limit.10 5.2.4 Receiver sensitivity.10 5.2.4.1 Definition.10 5.2.4.2 Conformance.10 5.2.4.3 Limit.10 5.2.5 Changes in the received signal.10 5.2.5.1 Definition.10 5.2.5.2 Limit.10 6 Measurement uncertainties.11 Annex A (normative): The EN Requirements Table (EN-RT).12 Annex B (informative): The EN title in the official languages.13 History.14
SIST EN 300 718-3 V1.2.1:2004
ETSI ETSI EN 300 718-3 V1.2.1 (2004-02) 4
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document is part 3 of a multi-part deliverable covering the Avalanche Beacons; Transmitter-receiver systems, as identified below: Part 1: "Technical characteristics and test methods"; Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive"; Part 3: "Harmonized EN covering essential requirements of article 3.3e of the R&TTE Directive". The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). The present document implements requirements laid down in Commission Decision 2001/148/EC [8].
National transposition dates Date of adoption of this EN: 6 February 2004 Date of latest announcement of this EN (doa): 31 May 2004 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 November 2004 Date of withdrawal of any conflicting National Standard (dow): 30 November 2005
SIST EN 300 718-3 V1.2.1:2004
ETSI ETSI EN 300 718-3 V1.2.1 (2004-02) 5
Introduction The present document is part of a set of standards designed to fit in a modular structure to cover all radio and telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure. The modular structure is shown in figure 1.
- If needed, new standards for human exposure to Electromagnetic Fields, - if needed, new standards for acoustic safety Use of spectrum * If needed Scoped by equipment class or type Scoped by frequency and/or equipment type Disability* Privacy* Fraud* No harm to the network* Emergency* Interworking via
the network* Interworking with the network Non-radio Radio (RE) Non-TTE TTE 3.1b 3.2 3.3c 3.3b 3.3a 3.3d 3.3e 3.3f Radio Product EMC EN 301 489 multi-part EMC standard Generic and product standards also notified under EMC Directive Standards also notified under LV Directive 3.1a New radio harmonized standards Spectrum EMC Safety
Figure 1: Modular structure for the various standards used under the R&TTE Directive SIST EN 300 718-3 V1.2.1:2004
ETSI ETSI EN 300 718-3 V1.2.1 (2004-02) 6
The left hand edge of the figure shows the different clauses of article 3 of the Directive.
For article 3.3 various horizontal boxes are shown. Dotted lines indicate that at the time of publication of the present document essential requirements in these areas have to be adopted by the Commission. If such essential requirements are adopted, and as far and as long as they are applicable, they will justify individual standards whose scope is likely to be specified by function or interface type. The vertical boxes show the standards under article 3.2 for the use of the radio spectrum by radio equipment. The scopes of these standards are specified either by frequency (normally in the case where frequency bands are harmonized) or by radio equipment type. For article 3.1b the diagram shows EN 301 489, the multi-part product EMC standard for radio used under the EMC Directive [2].
For article 3.1a the diagram shows the existing safety standards currently used under the LV Directive [3] and new standards cover
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.