ETSI EN 300 494-3 V1.3.1 (2001-04)

Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)

REN/DECT-040188-3

Digitalne izboljšane brezvrvične telekomunikacije (DECT) – Profil generičnega dostopa (GAP) – Profil preskušalne specifikacije (PTS) – 3. del: Od profila odvisna preskušalna specifikacija (PSTS) – Fiksna radijska zaključitev (FT)

General Information

• Status: Published
• Publication Date: 19-Apr-2001
• Technical Committee: DECT 4 - DECT Testing aspects
• Current Stage: 12 - Completion
• Due Date: 27-Apr-2001
• Completion Date: 20-Apr-2001
• Mandate: T-317
• Ref Project: SIST EN 300 494-3 V1.3.1:2003 - Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 494-3 V1.3.1:2003
01-december-2003
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH'(&7±3URILOJHQHULþQHJD
GRVWRSD*$3±3URILOSUHVNXãDOQHVSHFLILNDFLMH376±GHO2GSURILODRGYLVQD
SUHVNXãDOQDVSHFLILNDFLMD3676±)LNVQDUDGLMVND]DNOMXþLWHY)7
Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP);
Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed
radio Termination (FT)
Ta slovenski standard je istoveten z: EN 300 494-3 Version 1.3.1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST EN 300 494-3 V1.3.1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 494-3 V1.3.1:2003

---------------------- Page: 2 ----------------------

SIST EN 300 494-3 V1.3.1:2003
ETSI EN 300 494-3 V1.3.1 (2001-04)
European Standard (Telecommunications series)
Digital Enhanced Cordless Telecommunications (DECT);
Generic Access Profile (GAP);
Profile Test Specification (PTS);
Part 3: Profile Specific Test Specification (PSTS) -
Fixed radio Termination (FT)

---------------------- Page: 3 ----------------------

SIST EN 300 494-3 V1.3.1:2003
2 ETSI EN 300 494-3 V1.3.1 (2001-04)
Reference
REN/DECT-040188-3
Keywords
DECT, GAP, PTS, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone] Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 494-3 V1.3.1:2003
3 ETSI EN 300 494-3 V1.3.1 (2001-04)
Contents
Intellectual Property Rights .6
Foreword.6
1 Scope.7
2 References.7
3 Definitions and abbreviations.9
3.1 Definitions . 9
3.2 Abbreviations. 9
4 Relevant test cases list .10
4.1 Network (NWK) layer . 10
4.1.1 Test suite structure (TSS). 10
4.1.2 Test case index. 11
4.2 Data Link Control (DLC) layer. 14
4.2.1 Test suite structure. 14
4.2.2 Test case index. 15
4.3 Medium Access Control (MAC) layer. 16
4.3.1 Test suite structure. 16
4.3.2 Test case index. 17
4.4 Physical (PHY) layer. 18
4.4.1 Manufacturer declarations. 18
4.4.2 Normal Transmitted Power (NTP). 18
4.4.2.1 Verdict criteria for IUTs with an integral antenna. 18
4.4.2.2 Verdict criteria for IUTs with external antenna connection(s) . 18
4.4.3 RFP radio receiver sensitivity. 18
4.4.4 Void . 18
4.4.5 Receiver intermodulation performance . 18
5 Additional test cases list.19
5.1 Test purposes . 19
5.1.1 NWK layer . 19
5.1.2 DLC layer. 19
5.1.3 MAC layer. 19
5.1.4 PHY layer. 19
5.2 Test cases. 19
5.2.1 NWK layer . 19
5.2.2 DLC layer. 19
5.2.3 MAC layer. 19
5.2.4 PHY layer. 20
5.2.4.1 Receiver sensitivity tolerance of transmitter deviation variations . 20
5.2.4.1.1 Definition. 20
5.2.4.1.2 Test environment. 20
5.2.4.1.3 Method of measurement . 20
5.2.4.1.4 Verdict criteria . 20
5.2.4.2 Transmission of Z-field. 20
5.2.4.2.1 Definition. 21
5.2.4.2.2 Test environment. 21
5.2.4.2.3 Method of measurement . 21
5.2.4.2.4 Verdict criteria . 21
Annex A (normative): Profile Implementation eXtra Information for Testing (PIXIT)
proforma .22
A.1 General.22
A.2 Profile IXIT Requirements List (XRL).22
A.2.1 NWK layer protocol . 22
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 494-3 V1.3.1:2003
4 ETSI EN 300 494-3 V1.3.1 (2001-04)
A.2.2 DLC layer protocol. 22
A.2.3 MAC layer protocol. 22
A.2.4 PHY layer protocol. 22
A.3 Profile specific IXIT .22
A.3.1 NWK layer. 22
A.3.2 DLC layer . 22
A.3.3 MAC layer . 23
A.3.4 PHY layer . 23
A.3.5 Configuration constraints. 23
A.4 Declaration of features supported.23
A.4.1 Network layer. 23
Annex B (normative): Profile Conformance Test Report (PCTR) proforma.25
B.1 Identification summary .25
B.1.1 Profile CTR. 25
B.1.2 Implementation Under Test (IUT). 26
B.1.3 Testing environment. 26
B.1.4 Limits and reservations. 26
B.1.5 Comments. 27
B.2 IUT conformance status.27
B.3 Static conformance summary .27
B.4 Dynamic conformance summary.27
B.5 Static conformance review report.28
B.6 Test campaign report .28
B.6.1 NWK layer. 29
B.6.2 DLC layer . 31
B.6.3 MAC layer . 31
B.6.4 PHY layer . 32
B.7 Observations.32
Annex C (normative): System Conformance Test Report (SCTR) proforma .33
C.1 Identification summary .33
C.1.1 System Conformance Test Report (SCTR). 33
C.1.2 Test laboratory . 33
C.1.3 Client. 34
C.1.4 System Under Test (SUT). 34
C.1.5 Profile. 35
C.1.6 Nature of conformance testing. 35
C.1.7 Limits and reservations. 35
C.1.8 Record of agreement. 36
C.1.9 Comments. 36
C.2 System report summary .37
C.2.1 Profile testing summary for GAP NWK layer FT. 37
C.2.2 Profile testing summary for GAP DLC layer FT. 38
C.2.3 Profile testing summary for GAP MAC layer FT. 39
C.2.4 Profile testing summary for GAP PHY layer FT. 40
Annex D (normative): System Conformance Statement (SCS) proforma .41
D.1 Identification summary .41
D.1.1 SCS identification . 41
D.1.2 IUT identification. 41
D.1.3 Client identification. 42
D.1.4 Supplier identification . 42
D.1.5 Manufacturer identification. 43
D.1.6 Protocols identification. 43
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 494-3 V1.3.1:2003
5 ETSI EN 300 494-3 V1.3.1 (2001-04)
D.1.7 Profile identification. 43
D.2 Miscellaneous system information .44
D.2.1 Configuration. 44
D.2.2 Other information. 44
History .45
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 494-3 V1.3.1:2003
6 ETSI EN 300 494-3 V1.3.1 (2001-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced Cordless
Telecommunications (DECT).
The present document is part 3 of a multi-part EN covering the Generic Access Profile (GAP) as identified below:
Part 1: "Summary";
Part 2: "Profile Specific Test Specification (PSTS) - Portable radio Termination (PT)";
Part 3: "Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)".
National transposition dates
Date of adoption of this EN: 13 April 2001
Date of latest announcement of this EN (doa): 31 July 2001
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2002
Date of withdrawal of any conflicting National Standard (dow): 31 January 2002
ETSI

---------------------- Page: 8 ----------------------

SIST EN 300 494-3 V1.3.1:2003
7 ETSI EN 300 494-3 V1.3.1 (2001-04)
1 Scope
The present document contains the test specification for Digital Enhanced Cordless Telecommunications (DECT)
Generic Access Profile (GAP) Fixed Part (FP) applications.
The main objective of the GAP test specification is to provide approval tests giving a high probability of air interface
inter-operability between different manufacturer's equipment in different environments (i.e. public, business and
residential).
The ISO standard for the methodology of conformance testing ISO/IEC 9646 parts 1 to 7 [9] to [15] is used as the basis
for the test methodology, and as the basis for the test case specification. This is considered to be unsuitable for Physical
layer testing, and therefore a text description is used.
The test cases listed in the present document have been derived from the DECT Common Interface (CI) Test Case
Library (TCL) [18] to [26]. In addition as far as the Physical layer is concerned EN 300 176 parts 1 [16] and 2 [30]
apply. Additional GAP specific test cases are included where required. The Profile IXIT is based on the DECT CI
PIXITs specified in EN 300 497 [18] to [26].
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
[1] ETSI EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 1: Overview".
[2] ETSI EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 2: Physical Layer (PHL)".
[3] ETSI EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 3: Medium Access Control (MAC) layer".
[4] ETSI EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 4: Data Link Control (DLC) layer".
[5] ETSI EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 5: Network (NWK) layer".
[6] ETSI EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 6: Identities and addressing".
[7] ETSI EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 7: Security features".
[8] ETSI EN 300 444: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP)".
[9] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection; Conformance testing
methodology and framework - Part 1: General concepts".
[10] ISO/IEC 9646-2: "Information technology - Open Systems Interconnection; Conformance testing
methodology and framework - Part 2: Abstract test suite specification".
ETSI

---------------------- Page: 9 ----------------------

SIST EN 300 494-3 V1.3.1:2003
8 ETSI EN 300 494-3 V1.3.1 (2001-04)
[11] ISO/IEC 9646-3: "Information technology - Open Systems Interconnection; Conformance testing
methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)".
[12] ISO/IEC 9646-4: "Information technology - Open Systems Interconnection; Conformance testing
methodology and framework - Part 4: Test realization".
[13] ISO/IEC 9646-5: "Information technology - Open Systems Interconnection; Conformance testing
methodology and framework - Part 5: Requirements on test laboratories and clients for the
conformance assessment process".
[14] ISO/IEC 9646-6: "Information technology - Open Systems Interconnection; Conformance testing
methodology and framework - Part 6: Protocol profile test specification".
[15] ISO/IEC 9646-7: "Information technology - Open Systems Interconnection; Conformance testing
methodology and framework - Part 7: Implementation Conformance Statements".
[16] ETSI EN 300 176-1: "Digital Enhanced Cordless Telecommunications (DECT); Approval test
specification; Part 1: Radio".
[17] ETSI EN 300 476 (all parts): "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma".
[18] ETSI EN 300 497-1: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 1: Test Suite Structure (TSS) and Test Purposes (TP)
for Medium Access Control (MAC) layer".
[19] ETSI EN 300 497-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 2: Abstract Test Suite (ATS) for Medium Access
Control (MAC) layer - Portable radio Termination (PT)".
[20] ETSI EN 300 497-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 3: Abstract Test Suite (ATS) for Medium Access
Control (MAC) layer - Fixed radio Termination (FT)".
[21] ETSI EN 300 497-4: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 4: Test Suite Structure (TSS) and Test
Purposes (TP) - Data Link Control (DLC) layer".
[22] ETSI EN 300 497-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface(CI);Test CaseLibrary(TCL);Part5:AbstractTest Suite(ATS) -DataLinkControl
(DLC) layer".
[23] ETSI EN 300 497-6: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 6: Test Suite Structure (TSS) and Test
Purposes (TP) - Network (NWK) layer - Portable radio Termination (PT)".
[24] ETSI EN 300 497-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface(CI);Test CaseLibrary(TCL);Part7:AbstractTest Suite(ATS) for Network (NWK)
layer - Portable radio Termination (PT)".
[25] ETSI EN 300 497-8: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 8: Test Suite Structure (TSS) and Test
Purposes (TP) - Network (NWK) layer - Fixed radio Termination (FT)".
[26] ETSI EN 300 497-9: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface(CI);Test CaseLibrary(TCL);Part9:AbstractTest Suite(ATS) for Network (NWK)
layer - Fixed radio Termination (FT)".
[27] ETSI ETS 300 474-1: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile requirement list and profile specific Implementation Conformance
Statement (ICS) proforma; Part 1: Portable radio Termination (PT)".
[28] ETSI ETS 300 474-2: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile requirement list and profile specific Implementation Conformance
Statement (ICS) proforma; Part 2: Fixed radio Termination (FT)".
ETSI

---------------------- Page: 10 ----------------------

SIST EN 300 494-3 V1.3.1:2003
9 ETSI EN 300 494-3 V1.3.1 (2001-04)
[29] ETSI EN 300 494-1: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile Test Specification (PTS); Part 1: Summary".
[30] ETSI EN 300 176-2: "Digital Enhanced Cordless Telecommunications (DECT); Approval test
specification; Part 2: Speech".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
- terms given in ISO/IEC 9646 parts 1 to 7 [9] to [15];
- definitions given in EN 300 175 parts 1 to 7 [1] to [7];
- definitions given in EN 300 444 [8].
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AC Authentication Code
ATS Abstract Test Suite
CC Call Control
CI Common Interface
DCK Derived Cipher Key
DLC Data Link Control
FT Fixed radio Termination
GAP Generic Access Profile
ICS Implementation Conformance Statement
IPUI International Portable User Identity
IUT Implementation Under Test
IXIT Implementation eXtra Information for Testing
LCE Link Control Entity
LLME Lower Layer Management Entity
MAC Medium Access Control
MM Mobility Management
NLF New Link Flag
NWK Network
PARK Portable Access Rights Key
PHY Physical
PICS Protocol Implementation Conformance Statement
PIXIT Protocol Implementation eXtra Information for Testing
PT Portable radio Termination
PSTS Profile Specific Test Specification
PTS Profile Test Specification
SARI Secondary Access Rights Identity
SUT System Under Test
TPUI Temporary Portable User Identity
TS Test System
ETSI

---------------------- Page: 11 ----------------------

SIST EN 300 494-3 V1.3.1:2003
10 ETSI EN 300 494-3 V1.3.1 (2001-04)
4 Relevant test cases list
4.1 Network (NWK) layer
This clause includes lists of the test groups and abstract test
...