ETSI EN 300 330-2 V1.6.1 (2015-03)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
REN/ERM-TG28-0437
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Naprave kratkega dosega (SRD) - Radijska oprema v frekvenčnem območju od 9 kHz do 25 MHz in sistemi z indukcijsko zanko v frekvenčnem območju od 9 kHz do 30 MHz - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.577(Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 300 330-2 V1.6.1SIST EN 300 330-2 V1.6.1:2015en01-julij-2015SIST EN 300 330-2 V1.6.1:2015SLOVENSKI
STANDARD
SIST EN 300 330-2 V1.6.1:2015
ETSI EN 300 330-2 V1.6.1 (2015-03) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
HARMONIZED EUROPEAN STANDARD SIST EN 300 330-2 V1.6.1:2015
ETSI ETSI EN 300 330-2 V1.6.1 (2015-03) 2
Reference REN/ERM-TG28-0437 Keywords radio, RFID, SRD, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2015. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 300 330-2 V1.6.1:2015
ETSI ETSI EN 300 330-2 V1.6.1 (2015-03) 3 Contents Intellectual Property Rights . 4 Foreword . 4 Modal verbs terminology . 4 Introduction . 5 1 Scope . 6 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 7 3 Definitions, symbols and abbreviations . 8 3.1 Definitions . 8 3.2 Symbols . 8 3.3 Abbreviations . 8 4 Technical requirements specifications . 8 4.1 Environmental conditions . 8 4.1.1 Environmental profile . 8 4.2 Conformance requirements . 8 4.2.1 Transmitter requirements . 8 4.2.1.1 Permitted range of operating frequencies . 8 4.2.1.2 Limits for transmitters in the range from 9 kHz to 30 MHz . 8 4.2.1.3 Limits for the permitted range of modulation bandwidth . 8 4.2.1.4 Transmitter spurious and out-of-band emissions . 9 4.2.2 Receiver requirements . 9 4.2.2.1 Adjacent channel selectivity - in band (receiver category 1 only) . 9 4.2.2.2 Blocking or desensitation (receiver categories 1 or 2 only) . 9 4.2.2.3 Receiver spurious emissions . 9 5 Testing for compliance with technical requirements . 9 5.1 Environmental conditions for testing . 9 5.2 Essential radio test suites . 9 5.2.1 Transmitter test suites . 9 5.2.1.1 Permitted range of operating frequencies . 9 5.2.1.2 Permitted range of the modulation bandwidth . 9 5.2.1.3 Emission limits for transmitters in the range from 9 kHz to 30 MHz . 9 5.2.1.4 Transmitter spurious and out-of-band emissions . 9 5.2.2 Receiver test suites. 9 5.2.2.1 Adjacent channel selectivity (receiver category 1 only) . 9 5.2.2.2 Blocking or desensitation (receiver categories 1 or 2 only) . 9 5.2.2.3 Receiver spurious emissions . 10 5.3 Interpretation of results and measurement uncertainty . 10 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 11 Annex B (informative): Void . 13 Annex C (informative): Bibliography . 14 History . 15
SIST EN 300 330-2 V1.6.1:2015
ETSI ETSI EN 300 330-2 V1.6.1 (2015-03) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). For non EU countries the present document may be used for regulatory (Type Approval) purposes. The present document has been produced by ETSI in response to mandate M/284 issued from the European Commission under Directive 98/34/EC [i.1] as amended by Directive 98/48/EC [i.7]. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2]. See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonized Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC [i.2] are summarized in annex A. The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz, as identified below: Part 1: "Technical characteristics and test methods"; Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
National transposition dates Date of adoption of this EN: 20 February 2015 Date of latest announcement of this EN (doa): 31 May 2015 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 November 2015 Date of withdrawal of any conflicting National Standard (dow): 30 November 2016
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. SIST EN 300 330-2 V1.6.1:2015
ETSI ETSI EN 300 330-2 V1.6.1 (2015-03) 5 Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The modular structure is shown in ETSI EG 201 399 [i.3]. SIST EN 300 330-2 V1.6.1:2015
ETSI ETSI EN 300 330-2 V1.6.1 (2015-03) 6 1 Scope The present document applies to Short Range Devices (SRDs) transmitters and receivers as described in the scope of ETSI EN 300 330-1 [1]. The present document covers transmitters intended to operate in the frequency range as defined in the Commission Decision 2006/771/EC [i.4] on harmonization of the radio spectrum for use by short-range devices as amended by Commission Decision 2013/752/EU of 11 December 2013 [i.6] and the CEPT/ERC/REC 70-03 [i.5]. The document applies to: 1) Generic Short range Devices including transmitters operating in the range from 9 kHz to 25 MHz; and 2) inductive loop transmitters operating from 9 kHz to 30 MHz including Radio Frequency Identification (RFID) and EAS equipments operating in LF and HF ranges and for radio equipment including wireless power transfer (WPT) function in the same frequency range; 3) receivers of systems as defined by bullets 1 and 2; 4) these radio equipment types are capable of operating in the permitted frequency bands within the 9 kHz to 30 MHz range as specified in table 1: - either with a Radio Frequency (RF) output connection and dedicated antenna or with an integral antenna; - for all types of modulation; - with or without speech. Table 1 shows a list of the frequency bands as designated to Short Range Devices by some European Commission Decisions and the CEPT/ERC/REC 70-03 [i.5] as known at the date of publication of the present document. Table 1: Frequency bands designated to Short Range Devices within 9 kHz to 30 MHz
Frequency Bands/frequencies Applications Transmit and Receive 9 kHz to 90 kHz Inductive devices, Generic use Transmit and Receive 90 kHz to 119 kHz Inductive devices, Generic use Transmit and Receive 119 kHz to 140 kHz Inductive devices, Generic use Transmit and Receive 140 kHz to 148,5 kHz Inductive devices, Generic use Transmit and Receive 148,5 kHz to 5 MHz Inductive devices, Generic use Transmit and Receive 400 kHz to 600 kHz RFID only Transmit and Receive 5 kHz to 30 MHz Inductive devices, Generic use Transmit and Receive 3 155 kHz to 3 400 kHz Inductive devices,
...
ETSI EN 300 330-2 V1.6.1 (2015-03)
HARMONIZED EUROPEAN STANDARD
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Radio equipment in the frequency range
9 kHz to 25 MHz and inductive loop systems
in the frequency range 9 kHz to 30 MHz;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 ETSI EN 300 330-2 V1.6.1 (2015-03)
Reference
REN/ERM-TG28-0437
Keywords
radio, RFID, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2015.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 300 330-2 V1.6.1 (2015-03)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental conditions . 8
4.1.1 Environmental profile . 8
4.2 Conformance requirements . 8
4.2.1 Transmitter requirements . 8
4.2.1.1 Permitted range of operating frequencies . 8
4.2.1.2 Limits for transmitters in the range from 9 kHz to 30 MHz . 8
4.2.1.3 Limits for the permitted range of modulation bandwidth . 8
4.2.1.4 Transmitter spurious and out-of-band emissions . 9
4.2.2 Receiver requirements . 9
4.2.2.1 Adjacent channel selectivity - in band (receiver category 1 only) . 9
4.2.2.2 Blocking or desensitation (receiver categories 1 or 2 only) . 9
4.2.2.3 Receiver spurious emissions . 9
5 Testing for compliance with technical requirements . 9
5.1 Environmental conditions for testing . 9
5.2 Essential radio test suites . 9
5.2.1 Transmitter test suites . 9
5.2.1.1 Permitted range of operating frequencies . 9
5.2.1.2 Permitted range of the modulation bandwidth . 9
5.2.1.3 Emission limits for transmitters in the range from 9 kHz to 30 MHz . 9
5.2.1.4 Transmitter spurious and out-of-band emissions . 9
5.2.2 Receiver test suites. 9
5.2.2.1 Adjacent channel selectivity (receiver category 1 only) . 9
5.2.2.2 Blocking or desensitation (receiver categories 1 or 2 only) . 9
5.2.2.3 Receiver spurious emissions . 10
5.3 Interpretation of results and measurement uncertainty . 10
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 11
Annex B (informative): Void . 13
Annex C (informative): Bibliography . 14
History . 15
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 300 330-2 V1.6.1 (2015-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
For non EU countries the present document may be used for regulatory (Type Approval) purposes.
The present document has been produced by ETSI in response to mandate M/284 issued from the European
Commission under Directive 98/34/EC [i.1] as amended by Directive 98/48/EC [i.7].
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2].
See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonized Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.2] are summarized in annex A.
The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive
loop systems in the frequency range 9 kHz to 30 MHz, as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 20 February 2015
Date of latest announcement of this EN (doa): 31 May 2015
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 November 2015
Date of withdrawal of any conflicting National Standard (dow): 30 November 2016
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 300 330-2 V1.6.1 (2015-03)
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The
modular structure is shown in ETSI EG 201 399 [i.3].
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 300 330-2 V1.6.1 (2015-03)
1 Scope
The present document applies to Short Range Devices (SRDs) transmitters and receivers as described in the scope of
ETSI EN 300 330-1 [1].
The present document covers transmitters intended to operate in the frequency range as defined in the Commission
Decision 2006/771/EC [i.4] on harmonization of the radio spectrum for use by short-range devices as amended by
Commission Decision 2013/752/EU of 11 December 2013 [i.6] and the CEPT/ERC/REC 70-03 [i.5].
The document applies to:
1) Generic Short range Devices including transmitters operating in the range from 9 kHz to 25 MHz; and
2) inductive loop transmitters operating from 9 kHz to 30 MHz including Radio Frequency Identification (RFID)
and EAS equipments operating in LF and HF ranges and for radio equipment including wireless power transfer
(WPT) function in the same frequency range;
3) receivers of systems as defined by bullets 1 and 2;
4) these radio equipment types are capable of operating in the permitted frequency bands within the 9 kHz to
30 MHz range as specified in table 1:
- either with a Radio Frequency (RF) output connection and dedicated antenna or with an integral antenna;
- for all types of modulation;
- with or without speech.
Table 1 shows a list of the frequency bands as designated to Short Range Devices by some European Commission
Decisions and the CEPT/ERC/REC 70-03 [i.5] as known at the date of publication of the present document.
Table 1: Frequency bands designated to Short Range Devices within 9 kHz to 30 MHz
Frequency Bands/frequencies Applications
Transmit and Receive 9 kHz to 90 kHz Inductive devices, Generic use
Transmit and Receive 90 kHz to 119 kHz Inductive devices, Generic use
Transmit and Receive 119 kHz to 140 kHz Inductive devices, Generic use
Transmit and Receive 140 kHz to 148,5 kHz Inductive devices, Generic use
Transmit and Receive 148,5 kHz to 5 MHz Inductive devices, Generic use
Transmit and Receive 400 kHz to 600 kHz RFID only
Transmit and Receive 5 kHz to 30 MHz Inductive devices, Generic use
Transmit and Receive 3 155 kHz to 3 400 kHz Inductive devices, Generic use
Transmit and Receive 4 234 kHz Inductive devices, Railway applications
Transmit and Receive 4 516 kHz Inductive devices, Railway applications
Transmit and Receive 6 765 kHz to 6 795 kHz Inductive devices, Generic use
Transmit and Receive 7 400 kHz to 8 800 kHz Inductive devices, Generic use
Transmit and Receive 10 200 kHz to 11 000 kHz Inductive devices, Generic use
Transmit and Receive 11 810 kHz to 15 310 kHz RFID only
Transmit and Receive 12,5 MHz to 20
...
Final draft ETSI EN 300 330-2 V1.6.1 (2014-12)
HARMONIZED EUROPEAN STANDARD
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Radio equipment in the frequency range
9 kHz to 25 MHz and inductive loop systems
in the frequency range 9 kHz to 30 MHz;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 300 330-2 V1.6.1 (2014-12)
Reference
REN/ERM-TG28-0437
Keywords
radio, RFID, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2014.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 300 330-2 V1.6.1 (2014-12)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental conditions . 8
4.1.1 Environmental profile . 8
4.2 Conformance requirements . 8
4.2.1 Transmitter requirements . 8
4.2.1.1 Permitted range of operating frequencies . 8
4.2.1.2 Limits for transmitters in the range from 9 kHz to 30 MHz . 8
4.2.1.3 Limits for the permitted range of modulation bandwidth . 9
4.2.1.4 Transmitter spurious and out-of-band emissions . 9
4.2.2 Receiver requirements . 9
4.2.2.1 Adjacent channel selectivity - in band (receiver category 1 only) . 9
4.2.2.2 Blocking or desensitation (receiver categories 1 or 2 only) . 9
4.2.2.3 Receiver spurious emissions . 9
5 Testing for compliance with technical requirements . 9
5.1 Environmental conditions for testing . 9
5.2 Essential radio test suites . 9
5.2.1 Transmitter test suites . 9
5.2.1.1 Permitted range of operating frequencies . 9
5.2.1.2 Permitted range of the modulation bandwidth . 9
5.2.1.3 Emission limits for transmitters in the range from 9 kHz to 30 MHz . 9
5.2.1.4 Transmitter spurious and out-of-band emissions . 10
5.2.2 Receiver test suites. 10
5.2.2.1 Adjacent channel selectivity (receiver category 1 only) . 10
5.2.2.2 Blocking or desensitation (receiver categories 1 or 2 only) . 10
5.2.2.3 Receiver spurious emissions . 10
5.3 Interpretation of results and measurement uncertainty . 10
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 11
Annex B (informative): Void . 13
Annex C (informative): Bibliography . 14
History . 15
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 300 330-2 V1.6.1 (2014-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This final draft Harmonized European Standard (EN) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards EN Approval Procedure.
For non EU countries the present document may be used for regulatory (Type Approval) purposes.
The present document has been produced by ETSI in response to mandate M/284 issued from the European
Commission under Directive 98/34/EC [i.1] as amended by Directive 98/48/EC [i.7].
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2].
See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonized Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.2] are summarized in annex A.
The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive
loop systems in the frequency range 9 kHz to 30 MHz, as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "may not", "need", "need not", "will",
"will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms
for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 300 330-2 V1.6.1 (2014-12)
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The
modular structure is shown in ETSI EG 201 399 [i.3].
ETSI
---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 300 330-2 V1.6.1 (2014-12)
1 Scope
The present document applies to Short Range Devices (SRDs) transmitters and receivers as described in the scope of
ETSI EN 300 330-1 [1].
The present document covers transmitters intended to operate in the frequency range as defined in the Commission
Decision 2006/771/EC [i.4] on harmonization of the radio spectrum for use by short-range devices as amended by
Commission Decision 2013/752/EU of 11 December 2013 [i.6] and the CEPT/ERC/REC 70-03 [i.5].
The document applies to:
1) Generic Short range Devices including transmitters operating in the range from 9 kHz to 25 MHz; and
2) inductive loop transmitters operating from 9 kHz to 30 MHz including Radio Frequency Identification (RFID)
and EAS equipments operating in LF and HF ranges and for radio equipment including wireless power transfer
(WPT) function in the same frequency range;
3) receivers of systems as defined by bullets 1 and 2;
4) these radio equipment types are capable of operating in the permitted frequency bands within the 9 kHz to
30 MHz range as specified in table 1:
- either with a Radio Frequency (RF) output connection and dedicated antenna or with an integral antenna;
- for all types of modulation;
- with or without speech.
Table 1 shows a list of the frequency bands as designated to Short Range Devices by some European Commission
Decisions and the CEPT/ERC/REC 70-03 [i.5] as known at the date of publication of the present document.
Table 1: Frequency bands designated to Short Range Devices within 9 kHz to 30 MHz
Frequency Bands/frequencies Applications
Transmit and Receive 9 kHz to 90 kHz Inductive devices, Generic use
Transmit and Receive 90 kHz to 119 kHz Inductive devices, Generic use
Transmit and Receive 119 kHz to 140 kHz Inductive devices, Generic use
Transmit and Receive 140 kHz to 148,5 kHz Inductive devices, Generic use
Transmit and Receive 148,5 kHz to 5 MHz Inductive devices, Generic use
Transmit and Receive 400 kHz to 600 kHz RFID only
Transmit and Receive 5 kHz to 30 MHz Inductive devices, Generic use
Transmit and Receive 3 155 kHz to 3 400 kHz Inductive devices, Generic use
Transmit and Receive 4 234 kHz Inductive devices, Railway applications
Transmit and Receive 4 516 kHz Inductive devices, Railway applications
Transmit and Receive 6 765 kHz to 6 795 kHz Inductive device
...
Draft ETSI EN 300 330-2 V1.6.0 (2014-06)
Harmonized European Standard
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD);
Radio equipment in the frequency range
9 kHz to 25 MHz and inductive loop systems
in the frequency range 9 kHz to 30 MHz;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 300 330-2 V1.6.0 (2014-06)
Reference
REN/ERM-TG28-0437
Keywords
radio, RFID, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2014.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 300 330-2 V1.6.0 (2014-06)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental conditions . 8
4.1.1 Environmental profile . 8
4.2 Conformance requirements . 8
4.2.1 Transmitter requirements . 8
4.2.1.1 Permitted range of operating frequencies . 8
4.2.1.2 Limits for transmitters in the range from 9 kHz to 30 MHz . 8
4.2.1.3 Limits for the permitted range of modulation bandwidth . 8
4.2.1.4 Transmitter spurious and out-of-band emissions . 9
4.2.2 Receiver requirements . 9
4.2.2.1 Adjacent channel selectivity - in band (receiver category 1 only) . 9
4.2.2.2 Blocking or desensitation (receiver categories 1 or 2 only) . 9
4.2.2.3 Receiver spurious emissions . 9
5 Testing for compliance with technical requirements . 9
5.1 Environmental conditions for testing . 9
5.2 Essential radio test suites . 9
5.2.1 Transmitter test suites . 9
5.2.1.1 Permitted range of operating frequencies . 9
5.2.1.2 Permitted range of the modulation bandwidth . 9
5.2.1.3 Emission limits for transmitters in the range from 9 kHz to 30 MHz . 9
5.2.1.4 Transmitter spurious and out-of-band emissions . 9
5.2.2 Receiver test suites. 10
5.2.2.1 Adjacent channel selectivity (receiver category 1 only) . 10
5.2.2.2 Blocking or desensitation (receiver categories 1 or 2 only) . 10
5.2.2.3 Receiver spurious emissions . 10
5.3 Interpretation of results and measurement uncertainty . 10
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 11
Annex B (informative): Void . 13
Annex C (informative): Bibliography . 14
History . 15
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 300 330-2 V1.6.0 (2014-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
For non EU countries the present document may be used for regulatory (Type Approval) purposes.
The present document has been produced by ETSI in response to mandate M/284 issued from the European
Commission under Directive 98/34/EC [i.1] as amended by Directive 98/48/EC [i.7].
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2].
See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonized Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.2] are summarized in annex A.
The present document is part 2 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive
loop systems in the frequency range 9 kHz to 30 MHz, as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive ".
National transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "may not", "need", "need not", "will",
"will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms
for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 300 330-2 V1.6.0 (2014-06)
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The
modular structure is shown in EG 201 399 [i.3].
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 300 330-2 V1.6.0 (2014-06)
1 Scope
The present document applies to Short Range Devices (SRDs) transmitters and receivers as described in the scope of
EN 300 330-1 [1].
The present document covers transmitters intended to operate in the frequency range as defined in the Commission
Decision 2006/771/EC [i.4] on harmonisation of the radio spectrum for use by short-range devices as amended by
Commission Decision 2013/752/EU of 11 December 2013 /EC [i.6] and the CEPT/ERC/REC 70-03 [i.5].
The document applies to:
1) Generic Short range Devices including transmitters operating in the range from 9 kHz to 25 MHz; and
2) inductive loop transmitters operating from 9 kHz to 30 MHz including Radio Frequency Identification (RFID)
EAS equipments operating in LF and HF ranges and for inductive wireless power transfer (WPT) equipments
3) receivers operating from 9 kHz to 30 MHz.
These radio equipment types are capable of operating in the permitted frequency bands within the 9 kHz to 30 MHz
range as specified in table 1:
- either with a Radio Frequency (RF) output connection and dedicated antenna or with an integral antenna;
- for all types of modulation;
- with or without speech.
Table 1 shows a list of the frequency bands as designated to Short Range Devices by some European Commission
Decisions and the CEPT/ERC/REC 70-03 [i.5] as known at the date of publication of the present document.
Table 1: Frequency bands designated to Short Range Devices within 9 kHz to 30 MHz
Frequency Bands/frequencies Applications
Transmit and Receive 9 kHz to 90 kHz Inductive devices, Generic use
Transmit and Receive 90 kHz to 119 kHz Inductive devices, Generic use
Transmit and Receive 119 kHz to 140 kHz Inductive devices, Generic use
Transmit and Receive 140 kHz to 148,5 kHz Inductive devices, Generic use
Transmit and Receive 148,5 kHz to 5 MHz Inductive devices, Generic use
Transmit and Receive 400 kHz to 600 kHz RFID only
Transmit and Receive 5 kHz to 30 MHz Inductive devices, Generic use
Transmit and Receive 3 155 kHz to 3 400 kHz Inductive devices, Generic use
Transmit and Receive 4 234 kHz Inductive devices, Railway applic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.