ETSI EN 302 296 V1.1.1 (2005-01)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the digital television broadcast service, Terrestrial (DVB-T); Harmonized EN under article 3.2 of the R&TTE Directive

DEN/ERM-TG17-003

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Oddajniška oprema za prizemno digitalno (televizijsko) videoradiodifuzijsko storitev (DVB-T) - Harmonizirani EN v skladu s členom 3.2 direktive R&TTE

General Information

• Status: Published
• Publication Date: 20-Dec-2006
• Technical Committee: ERM TG17 - ERM Standards for PMSE and broadcast equipment/services
• Current Stage: 12 - Completion
• Due Date: 28-Jan-2005
• Completion Date: 26-Jan-2005
• Mandate: M/284
• Ref Project: SIST EN 302 296 V1.1.1:2005 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the digital television broadcast service, Terrestrial (DVB-T); Harmonized EN under article 3.2 of the R&TTE Directive

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 302 296 V1.1.1:2005
01-maj-2005
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
2GGDMQLãNDRSUHPD]DSUL]HPQRGLJLWDOQRWHOHYL]LMVNRYLGHRUDGLRGLIX]LMVNR
VWRULWHY'9%7+DUPRQL]LUDQL(1YVNODGXVþOHQRPGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting
equipment for the digital television broadcast service, Terrestrial (DVB-T); Harmonized
EN under article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 302 296 Version 1.1.1
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
33.170 Televizijska in radijska Television and radio
difuzija broadcasting
SIST EN 302 296 V1.1.1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 302 296 V1.1.1:2005

---------------------- Page: 2 ----------------------

SIST EN 302 296 V1.1.1:2005

ETSI EN 302 296 V1.1.1 (2005-01)
Candidate Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Transmitting equipment for
the digital television broadcast service,
Terrestrial (DVB-T);
Harmonized EN under article 3.2
of the R&TTE Directive

---------------------- Page: 3 ----------------------

SIST EN 302 296 V1.1.1:2005
 2 ETSI EN 302 296 V1.1.1 (2005-01)




Reference
DEN/ERM-TG17-003
Keywords
broadcasting, digital, radio, regulation, terrestrial,
transmitter, TV, video
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2005.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 302 296 V1.1.1:2005
 3 ETSI EN 302 296 V1.1.1 (2005-01)

Contents
Intellectual Property Rights.4
Foreword.4
Introduction .5
1 Scope.7
2 References.7
3 Definitions, symbols and abbreviations .8
3.1 Definitions.8
3.2 Symbols.9
3.3 Abbreviations.9
4 Technical requirements specifications.9
4.1 Environmental profile.9
4.2 Antenna port measurements.10
4.2.1 Spurious emissions.10
4.2.1.1 Definition.10
4.2.1.2 Method of measurement (essential test suite) .10
4.2.1.2.1 Initial conditions.10
4.2.1.2.2 Procedure.10
4.2.1.2.3 Test requirements.10
4.2.1.3 Limit.10
4.2.2 Out-of-band emissions.12
4.2.2.1 Definition.12
4.2.2.2 Method of measurement (essential test suite) .12
4.2.2.2.1 Initial conditions.12
4.2.2.2.2 Procedure.13
4.2.2.2.3 Test requirements.13
4.2.2.3 Limit.13
4.3 Enclosure port measurements (radiated emissions).17
4.3.1 Cabinet radiation.17
4.3.1.1 Definition.17
4.3.1.2 Method of test (essential test suite) .17
4.3.1.2.1 Initial conditions.17
4.3.1.2.2 Procedure.17
4.3.1.2.3 Test requirements.17
4.3.1.3 Limits.17
4.4 Measurement uncertainties.18
Annex A (normative): General measuring arrangements.19
A.1 Testing arrangements for antenna port measurements .19
A.1.1 Spurious emissions.19
A.1.2 Out-of-band emissions.20
A.1.3 Test frequency range .20
A.1.4 Test modulating signal .21
A.2 Testing arrangements for enclosure port (radiated emissions) measurements .21
Annex B (informative): Bibliography.22
Annex C (informative): The EN title in the official languages .23
History .24

ETSI

---------------------- Page: 5 ----------------------

SIST EN 302 296 V1.1.1:2005
 4 ETSI EN 302 296 V1.1.1 (2005-01)

Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [1] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [2] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").

National transposition dates
Date of adoption of this EN: 21 January 2005
Date of latest announcement of this EN (doa): 30 April 2005
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 October 2005
Date of withdrawal of any conflicting National Standard (dow): 31 October 2006

ETSI

---------------------- Page: 6 ----------------------

SIST EN 302 296 V1.1.1:2005
 5 ETSI EN 302 296 V1.1.1 (2005-01)

Introduction
The present document is part of a set of standards designed to fit in a modular structure to cover all radio and
telecommunications terminal equipment under the R&TTE Directive [2]. Each standard is a module in the structure.
The modular structure is shown in figure 1.

Disability*
3.3f
Emergency*
3.3e
Fraud*
3.3d
3.3c
Privacy*
No harm to the network*
3.3b
* If needed
Scoped by
Interworking via the network*
equipment
3.3a class or type
Interworking with the network
Use of spectrum
3.2
New radio harmonized standards
Spectrum
Scoped by frequency and/or equipment type
Radio Product EMC
EN 301 489 multi-part EMC standard
3.1b
EMC
Generic and product standards also notified under EMC Directive
- If needed, new standards for human exposure to
Electromagnetic Fields,
- if needed, new standards for acoustic safety
3.1a
Standards also notified under LV Directive
Safety
Non-radio Radio (RE)
TTE Non-TTE

Figure 1: Modular structure for the various standards used under the R&TTE Directive [2]
ETSI

---------------------- Page: 7 ----------------------

SIST EN 302 296 V1.1.1:2005
 6 ETSI EN 302 296 V1.1.1 (2005-01)

The left hand edge of the figure 1 shows the different clauses of article 3 of the R&TTE Directive [2].
For article 3.3 various horizontal boxes are shown. Dotted lines indicate that at the time of publication of the present
document essential requirements in these areas have to be adopted by the Commission. If such essential requirements
are adopted, and as far and as long as they are applicable, they will justify individual standards whose scope is likely to
be specified by function or interface type.
The vertical boxes show the standards under article 3.2 for the use of the radio spectrum by radio equipment. The
scopes of these standards are specified either by frequency (normally in the case where frequency bands are
harmonized) or by radio equipment type.
For article 3.1b the diagram shows EN 301 489, the multi-part product EMC standard for radio used under the EMC
Directive [3].
For article 3.1a the diagram shows the existing safety standards currently used under the LV Directive [4] and new
standards covering human exposure to electromagnetic fields. New standards covering acoustic safety may also be
required.
The bottom of the figure shows the relationship of the standards to radio equipment and telecommunications terminal
equipment. A particular equipment may be radio equipment, telecommunications terminal equipment or both. A radio
spectrum standard will apply if it is radio equipment. An article 3.3 standard will apply as well only if the relevant
essential requirement under the R&TTE Directive [2] is adopted by the Commission and if the equipment in question is
covered by the scope of the corresponding standard. Thus, depending on the nature of the equipment, the essential
requirements under the R&TTE Directive [2] may be covered in a set of standards.
The modularity principle has been taken because:
• it minimizes the number of standards needed. Because equipment may, in fact, have multiple interfaces and
functions it is not practicable to produce a single standard for each possible combination of functions that may
occur in an equipment;
• it provides scope for standards to be added:
- under article 3.2 when new frequency bands are agreed; or
- under article 3.3 should the Commission take the necessary decisions
without requiring alteration of standards that are already published;
• it clarifies, simplifies and promotes the usage of Harmonized Standards as the relevant means of conformity
assessment.
Other document directly associated with the present document:
• EN 301 489-14 [5].
ETSI

---------------------- Page: 8 ----------------------

SIST EN 302 296 V1.1.1:2005
 7 ETSI EN 302 296 V1.1.1 (2005-01)

1 Scope
The present document applies to transmitting equipment for the terrestrial digital television broadcasting service.
The types of equipment covered by the present document are as follows:
• Transmitting equipment for digital television broadcasting service, with 7 MHz and 8 MHz RF channel
bandwidths, operating in the CEPT frequency bands. These frequencies are currently within the television
Bands III, IV and V.
The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [2] (R&TTE Directive),
which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [2] may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
[1] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[3] Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member
States relating to electromagnetic compatibility (EMC Directive).
[4] Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of the
Member States relating to electrical equipment designed for use within certain voltage limits
(LV Directive).
[5] ETSI EN 301 489-14 (V1.2.1): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 14: Specific conditions for analogue and digital terrestrial TV broadcasting service
transmitters".
[6] ETSI EN 300 744 (V1.4.1): "Digital Video Broadcasting (DVB); Framing structure, channel
coding and modulation for digital terrestrial television".
[7] CENELEC EN 55022 (1998): "Information technology equipment - Radio disturbance
characteristics - Limits and methods of measurement".
ETSI

---------------------- Page: 9 ----------------------

SIST EN 302 296 V1.1.1:2005
 8 ETSI EN 302 296 V1.1.1 (2005-01)

[8] CENELEC EN 55011 (1998): "Industrial, scientific and medical (ISM) radio-frequency
equipment - Radio disturbance characteristics - Limits and methods of measurement".
[9] IEC 60489-1 + Am1 (1996) + Am2 (1999): "Methods of measurement for radio equipment used in
the mobile services. Part 1: General definitions and standard conditions of measurement".
[10] ETSI TR 100 028 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
antenna port: port of an apparatus which is designed, in normal operation, to be connected to an antenna using coaxial
cable
broadcasting service: radiocommunication service in which the transmissions are intended for direct reception by the
general public
NOTE: This service may include sound transmissions, television transmissions or other types of transmission.
cabinet radiation: radiation from an enclosure containing, equipment, excluding radiation from connected antennas or
cables
carrier power: average power supplied to the antenna port by a transmitter during one radio frequency cycle taken
under the condition of no modulation
class of emission: set of characteristics of an emission, designated by standard symbols, e.g. type of modulation of the
main carrier, modulating signal, type of information to be transmitted, and also, if appropriate, any additional signal
characteristics
dBc: decibels relative to the unmodulated carrier power of the emission
NOTE: In the cases which do not have a carrier, for example in some digital modulation schemes where the
carrier is not accessible for measurement, the reference level equivalent to dBc is decibels relative to the
mean power P.
digital signal: discretely timed signal in which information is represented by a finite number of well defined discrete
values that its characteristic quantities may take in time
digital television: television in which all information is represented by a digital signal
enclosure port: physical boundary of the apparatus through which electromagnetic fields may radiate or impinge
NOTE: In the case of integral antenna equipment, this port is inseparable from the antenna port.
environmental profile: range of environmental conditions under which equipment within the scope of EN 302 296 is
required to comply with the provisions EN 302 296
effective radiated power: product of the power supplied to the antenna and it gain relative to a half wave dipole in a
given direction
exclusion band: band of radio frequencies where no measurements are made
harmonic: component of order greater than 1 of the Fourier series of a periodic quantity
harmonic number: integral number given by the ratio of the frequency of a harmonic to the fundamental frequency
nd
(2 harmonic = 2 × fundamental frequency)
intermodulation products: unwanted frequencies resulting from intermodulation between carriers or harmonics of
emission, or between any oscillations generated to produce the carrier
ETSI

---------------------- Page: 10 ----------------------

SIST EN 302 296 V1.1.1:2005
 9 ETSI EN 302 296 V1.1.1 (2005-01)

mean power: average power supplied to the antenna port by a transmitter during an interval of time sufficiently long
compared with the lowest frequency encountered in the modulation taken under normal operating conditions
necessary bandwidth: for a given class of emission, the width of the frequency band which is sufficient to ensure the
transmission of information at the rate and with the quality required under specified conditions
out-of-band emissions: emission on a frequency or frequencies immediately outside the necessary bandwidth which
results from the modulation process, but excluding spurious emissions
rated output power: power that the transmitter or transposer shall deliver at its output under specified conditions of
operation
reference bandwidth: bandwidth in which the emission level is specified
spurious emissions: emission on a frequency or frequencies which are outside the necessary bandwidth and the level of
which may be reduced without affecting the corresponding transmission of information
NOTE: Spurious emissions include harmonic emissions, parasitic emissions, intermodulation products and
frequency conversion products but exclude out-of-band emissions.
unwanted emissions: consist of spurious emissions and out-of-band emissions
3.2 Symbols
For the purposes of the present document, the following symbols apply:
μ Micro
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
dB logarithmic ratio (tenths of a "Bel")
dBm dB relative to one milliwatt
DVB-T Digital Video Broadcasting - Terrestrial
EMC ElectroMagnetic Compatibility
EUT Equipment Under Test
GHz Giga Hertz
kHz kilo Hertz
LV Low Voltage
m metres
MHz Mega Hertz
QAM Quadrature Amplitude Modulation
R&TTE Radio and Telecommunications Terminal Equipment
RF Radio Frequency
TV TeleVision
W Watt
4 Technical requirements specifications
4.1 Environmental profile
The environmental profile for operation of the equipment shall be declared by the supplier. The equipment shall comply
with all the technical requirements of the present document at all times when operating within the boundary limits of the
required operational environmental profile.
ETSI

---------------------- Page: 11 ----------------------

SIST EN 302 296 V1.1.1:2005
 10 ETSI EN 302 296 V1.1.1 (2005-01)

4.2 Antenna port measurements
4.2.1 Spurious emissions
4.2.1.1 Definition
Emission on a frequency or frequencies which are outside the necessary bandwidth and the level of which may be
reduced without affecting the corresponding transmission of information. Spurious emissions include harmonic
emissions, parasitic emissions, intermodulation products and frequency conversion products but exclude out of band
emissions.
For the purposes of the present document spurious emissions are emissions at frequencies outside the frequency range
f ± 14 MHz for 7 MHz channels, f ± 12 MHz for 8 MHz channels, where f is the centre frequency of the channel,
0 0 0
irrespective of the number of carriers employed.
4.2.1.2 Method of measurement (essential test suite)
4.2.1.2.1 Initial conditions
Test environment:
- the normal operating environment, as declared by the equipment manufacturer.
Test frequencies:
1) the lowest operating frequency of the EUT;
2) the highest operating frequency of the EUT;
3) a frequency mid-way between 1) and 2) above.
Test arrangement (see figure A.1):
1) connect the EUT to the test load, via the coupling device;
2) connect the spectrum analyser to the coupling device.
For the purposes of this test no test signal is required, the manufacturer shall ensure that the full rated output power of
the transmitter will be maintained during this test.
4.2.1.2.2 Procedure
1) operate the EUT at each of the test frequencies as defined in clause 4.2.1.2.1;
2) measure the results on the spectrum analyser.
4.2.1.2.3 Test requirements
The results obtained shall be compared to the limits in clause 4.2.1.3 in order to demonstrate compliance.
4.2.1.3 Limit
Spurious emissions shall not exceed the values set out in table 4.1 additionally shown in figures 4.1 and 4.2, for the
frequency range 9 kHz to 4,5 GHz.
NOTE: In the case of a DVB-T transmitter supplied without an internal bandpass output filter, the manufacturer
shall specify the characteristics of the filter necessary to fulfil the spurious emission limits defined in
table 4.1. The manufacturer shall include this information in their test report.
ETSI

---------------------- Page: 12 ----------------------

-30 dBm ( 1µW)
-36 dBm (250nW)
SIST EN 302 296 V1.1.1:2005
 11 ETSI EN 302 296 V1.1.1 (2005-01)

Table 4.1: Spurious emission limits for DVB-T transmitters
Frequency range of the Limits of the spurious emission Reference Figure
spurious emission bandwidth
9 kHz to 174 MHz -36 dBm (250 nW) 100 kHz 4.1
> 174 MHz to 400 MHz -82 dBm, for P < 25 W 4.2
-126 dBc, for 25 W < P < 1 000 W 4 kHz
-66 dBm, for 1 000 W < P
> 400 MHz to 790 MHz -36 dBm (250 nW) 100 kHz 4.1
> 790 MHz to 862 MHz -76 dBm, for P < 25 W 4.2
-120 dBc, for 25 W < P < 1 000 W 4 kHz
-60 dBm, for 1 000 W < P
> 862 MHz to 1 000 MHz -36 dBm (250 nW) 100 kHz 4.1
> 1 000 MHz -30 dBm (1 µW) 100 kHz 4.1
NOTE: P = mean power of the transmitter.

dBc -70
9kHz -  174 MHz
  400 -  790 MHz
> 862 - 1000 MHz
-80
     > 1000 MHz
-90
-100
-110
30 40 50 60 70 80 90 dBm
2,5 5 25 50 250 500 2,5 5 25 50 250 500
1W 10W 100W 1kW 10kW 100kW 1MW
Mean power of the transmitter

Figure 4.1: Spurious emission limits for DVB-T transmitters
(100 kHz reference bandwidth)
ETSI
Ratio of spurious emission to mean power
(reference bandwidth 100 kHz)

---------------------- Page: 13 ----------------------

-60 dBm (1 nW)
-66 dBm (0,25 nW)
-76 dBm ( 25 pW)
-82 dBm ( 6,3 pW)
SIST EN 302 296 V1.1.1:2005
 12 ETSI EN 302 296 V1.1.1 (2005-01)

dBc -90
> 174 - 400 MHz
> 790 - 862 MHz
-100
-110
-120
-130
30 40 50 60 70 80 90 dBm
2,5 5 25 50 250 500 2,5 5 25 50 250 500
1W 10W 100W 1kW 10kW 100kW 1MW
Mean power of the transmitter

Figure 4.2: Spurious emission limits for DVB-T transmitters
(4 kHz reference bandwidth)
4.2.2 Out-of-band emissions
4.2.2.1 Definition
Emission on a frequency or frequencies immediately outside the necessary bandwidth which results from the
modulation process, but excludes spurious emissions.
For the purposes of the present document out-of-band emissions are emissions at frequencies outside the necessary
bandwidth and within the frequency ranges f ± 14 MHz for 7 MHz channels, f ± 12 MHz for 8 MHz channels, where
0 0
f is the centre frequency of the channel, irrespective of the number of carriers employed.
0
4.
...