ETSI EN 301 442 V1.1.1 (2000-05)
Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MESs), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 2,0 GHz bands under the Mobile Satellite Service (MSS) covering essential requirements under Article 3.2 of the R&TTE directive
Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MESs), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 2,0 GHz bands under the Mobile Satellite Service (MSS) covering essential requirements under Article 3.2 of the R&TTE directive
DEN/SES-000-TBR42
Satelitske zemeljske postaje in sistemi (SES) - Harmonizirani EN za mobilne zemeljske postaje (MES), vključno z ročnimi zemeljskimi postajami za S-PCN, ki delujejo v frekvenčnem pasu 2,0 GHz, pri mobilnih satelitskih storitvah, ki zajema bistvene zahteve člena direktive 3.2 R&TTE
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MESs), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 2,0 GHz bands under the Mobile Satellite Service (MSS) covering essential requirements under Article 3.2 of the R&TTE directive33.070.40SatelitSatelliteICS:Ta slovenski standard je istoveten z:EN 301 442 Version 1.1.136IST EN 301 442:2001en01-MXOLM-20013SIST EN 301 442:2001SLOVENSKI
STANDARD
SIST EN 301 442:2001
ETSIEN301442V1.1.1(2000-05)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)SatelliteEarthStationsandSystems(SES);HarmonizedENforMobileEarthStations(MESs),includinghandheldearthstations,forSatellitePersonalCommunicationsNetworks(S-PCN)inthe2,0GHzbandsundertheMobileSatelliteService(MSS)coveringessentialrequirementsunderArticle3.2oftheR&TTEdirectiveSIST EN 301 442:2001
ETSIETSIEN301442V1.1.1(2000-05)2ReferenceDEN/SES-000-TBR42Keywordssatellite,earthstation,MES,S-PCN,MSS,regulationETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 301 442:2001
ETSIETSIEN301442V1.1.1(2000-05)3ContentsIntellectualPropertyRights.6Foreword.6Introduction.71Scope.92References.93Definitionsandabbreviations.103.1Definitions.103.2Abbreviations.114Technicalrequirementsspecifications.124.1Environmentalprofile.124.1.1General.124.1.2Temperature.124.1.3Voltage.124.1.4Vibration.124.2Conformancerequirements.134.2.1Unwantedemissionsoutsidetheband1980,1MHzto2009,9MHz(carrier-on).134.2.1.1Justification.134.2.1.2TechnicalRequirement.134.2.1.3ConformanceTest.134.2.2Unwantedemissionswithinthebands1980,1MHzto2009,9MHz,1978,1MHzto1980,1MHzand2009,9MHzto2011,9MHz(carrier-on).134.2.2.1Justification.134.2.2.2TechnicalRequirement.144.2.2.3ConformanceTest.144.2.3Unwantedemissionsincarrier-offstate.144.2.3.1Justification.144.2.3.2TechnicalRequirement.144.2.3.3ConformanceTest.154.2.4MESControlandMonitoringFunctions(CMF).154.2.4.1Self-monitoringfunctions/Processormonitoring.154.2.4.1.1Justification.154.2.4.1.2TechnicalRequirement.154.2.4.1.3ConformanceTest.154.2.4.2Self-monitoringfunctions/Transmitfrequencygenerationsub-systemmonitoring.154.2.4.2.1Justification.154.2.4.2.2TechnicalRequirement.154.2.4.2.3ConformanceTest.164.2.4.3Networkcontrolauthorization.164.2.4.3.1Justification.164.2.4.3.2TechnicalRequirement.164.2.4.3.3ConformanceTest.164.2.4.4Networkcontrolreception.164.2.4.4.1Transmitfrequencycontrol.164.2.4.4.1.1Justification.164.2.4.4.1.2TechnicalRequirement.164.2.4.4.1.3ConformanceTest.164.2.4.5Fellowradiostationsinadual-modeormulti-modeterminal.164.2.4.5.1Justification.164.2.4.5.2TechnicalRequirement.164.2.4.5.3ConformanceTest.174.2.5Equipmentidentity.174.2.5.1Justification.17SIST EN 301 442:2001
ETSIETSIEN301442V1.1.1(2000-05)44.2.5.2TechnicalRequirement.174.2.5.3ConformanceTest.175Testingforcompliancewithtechnicalrequirements.175.1Environmentalconditionsfortesting.175.1.1Specificationoftheenvironmentaltestconditions.175.1.2Testsunderextremevoltageconditions.175.2Essentialradiotestsuites.185.2.1General.185.2.1.1Presentationofequipmentfortestingpurposes.185.2.1.2Descriptionofequipment.185.2.1.3Testingofhost-connectedequipmentandplug-inmodules.195.2.1.3.1Alternativeapproaches.195.2.1.3.2AlternativeA:combinedequipment.195.2.1.3.3AlternativeB:useofatestjig.195.2.1.4CMF/SpecialTestEquipment(STE).195.2.1.5Generaltestrequirements.205.2.1.5.1MEStestmodes.205.2.1.5.2SpecialTestEquipment.205.2.1.5.2.1UseofSTEforcontrolandmonitoringfunctionstests.205.2.1.5.2.2Testmodulatingsignal.215.2.1.5.3LaboratoryTestEquipment(LTE).215.2.1.5.4MethodoftestforMESRFemissionsaccordingtoequipmenttype.225.2.1.5.5ProceduresformeasurementofMESRFradiatedemissions.225.2.1.5.5.1General.225.2.1.5.5.1.1Testsite.225.2.1.5.5.1.2TestsetupforradiatedemissionsoftheMES.225.2.1.5.5.1.3ReferencepositionoftheMES.235.2.1.5.5.2Measurementprocedureforradiatedemissions(peak).235.2.1.5.5.2.1MeasurementprocedureforpeakradiatedemissionsoftheMES.235.2.1.5.5.2.2Measurementprocedureforpeakradiatedemissionsofthecabinet.255.2.1.5.5.3Measurementprocedureforradiatedemissions(average).255.2.1.5.5.3.1MeasurementprocedureforaverageradiatedemissionsoftheMES.255.2.1.5.5.3.2Measurementprocedureforaverageradiatedemissionsofthecabinet.265.2.1.5.6ProceduresformeasurementofMESRFconductedemissions.265.2.1.5.6.1General.265.2.1.5.6.1.1Testsite.275.2.1.5.6.1.2Testset-up.275.2.1.5.6.2Measurementprocedureforconductedemissions(peak).275.2.1.5.6.3Measurementprocedureforconductedemissions(average).275.2.1.5.7Interpretationofthemeasurementresults.285.2.1.5.8Testreport.285.2.2Unwantedemissionsoutsidetheband1980,1MHzto2009,9MHz(carrier-on).285.2.2.1Methodoftest.285.2.2.2Peakmeasurement.295.2.2.3Averagemeasurement.295.2.2.4Testrequirements.295.2.3Unwantedemissionswithinthebands1980,1MHzto2009,9MHz,1978,1MHzto1980,1MHzand2009,9MHzto2011,9MHz(carrier-on).295.2.3.1Methodoftest.295.2.3.2Measurementmethod.305.2.3.3Testrequirements.305.2.4Unwantedemissionsincarrier-offstate.305.2.4.1Methodoftest.305.2.4.2Measurementmethod.315.2.4.3Testrequirements.315.2.5MESControlandMonitoringFunctions(CMF).315.2.5.1Self-monitoringfunctions/ProcessorMonitoring.315.2.5.2Self-monitoringfunctions/Transmitfrequencygenerationsub-systemmonitoring.315.2.5.3Networkcontrolauthorization.315.2.5.3.1Methodoftest.31SIST EN 301 442:2001
ETSIETSIEN301442V1.1.1(2000-05)55.2.5.3.2Testprocedure.325.2.5.3.3Testrequirement.325.2.5.4Networkcontrolreception.325.2.5.4.1Transmitfrequencycontrol.325.2.5.4.1.1Methodoftest.325.2.5.4.1.2Testprocedure.325.2.5.4.1.3Testrequirement.335.2.5.5Fellowradiostationsinadual-modeormulti-modeterminal.335.2.5.5.1Methodoftest.335.2.5.5.2Testprocedure.335.2.5.5.3Testrequirements.335.2.6Equipmentidentity.335.2.6.1Methodoftest.335.2.6.2Testprocedure.345.2.6.3Testrequirements.34AnnexA(normative):TheENRequirementsTable(EN-RT).35AnnexB(informative):Explanationofnominatedbandwidth.36B.1Introduction.36B.2InterpretationofParameters[Bn,fc,a,b].36B.3Choiceofnominatedbandwidth.36B.4Maximumvaluefornominatedbandwidth.38Bibliography.40History.41SIST EN 301 442:2001
ETSIETSIEN301442V1.1.1(2000-05)6IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinSR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinSR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisCandidateHarmonizedEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeSatelliteEarthStationsandSystems(SES).ThepresentdocumenthasbeenproducedbyETSIinresponsetoamandatefromtheEuropeanCommissionissuedunderCouncilDirective98/34/EC[6](asamended)layingdownaprocedurefortheprovisionofinformationinthefieldoftechnicalstandardsandregulations.ThepresentdocumentisintendedtobecomeaHarmonizedStandard,thereferenceofwhichwillbepublishedintheOfficialJournaloftheEuropeanCommunitiesreferencingtheDirective1999/5/EC[1]oftheEuropeanParliamentandoftheCouncilof9March1999onradioequipmentandtelecommunicationsterminalequipmentandthemutualrecognitionoftheirconformity("theR&TTEDirective").NationaltranspositiondatesDateofadoptionofthisEN:28April2000DateoflatestannouncementofthisEN(doa):31July2000DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31January2001DateofwithdrawalofanyconflictingNationalStandard(dow):31January2001SIST EN 301 442:2001
ETSIETSIEN301442V1.1.1(2000-05)7IntroductionETSIhasdesignedamodularstructureforthestandards.Eachstandardisamoduleinthestructure.Themodularstructureisshowninfigure1.NewstandardforHealthforradio(ifneeded)Useofspectrum*IfneededScopedbyequipmentclassortypeScopedbyfrequencyand/orequipmenttypeDisability*Privacy*Fraud*Noharmtothenetwork*Emergency*Inter-workingviathenetwork*Inter-workingwiththenetworkNon-radioRadio(RE)Non-TTETTE3.1b3.23.3c3.3b3.3a3.3d3.3e3.3fRadioProductEMCExistingEMCstandardstobereplacedbyanewsinglemulti-partstandardGenericandbasestandardsalsonotifiedunderEMCDirectiveStandardsalsonotifiedunderLVDDirective(inclacousticsafetyifneeded)3.1aNewradioharmonisedstandardsSpectrumEMCSafetyFigure1:ModularstructureforthevariousstandardsusedundertheR&TTEDirectiveThelefthandedgeofthefigureshowsthedifferentsubclausesofArticle3oftheDirective.SIST EN 301 442:2001
ETSIETSIEN301442V1.1.1(2000-05)8Forarticle3.3varioushorizontalboxesareshown.TheirdottedlinesindicatethatnoessentialrequirementsintheseareashaveyetbeenadoptedbytheCommission.Ifsuchessentialrequirementsareadopted,theywillbeelaboratedinindividualstandardswhosescopeislikelytobespecifiedbyfunctionorinterfacetype.Theverticalboxesshowthestandardsunderarticle3.2fortheuseoftheradiospectrum.Thescopesofthesestandardsarespecifiedeitherbyfrequency(normallyinthecasewherefrequencybandsareharmonized)orbyradioequipmenttype.Forarticle3.1(b),thediagramshowsthenewsinglemulti-partproductEMCstandardforradio,andtheexistingcollectionofgenericandbasestandardscurrentlyusedundertheEMCDirective.Thepartsofthisnewstandardwillbecomeavailableinthesecondhalfof2000,andtheexistingseparateEMCstandardswillbeuseduntilitisavailable.Forarticle3.1(a)thediagramshowstheexistingsafetystandardscurrentlyusedundertheLVDDirectiveandthepossibilityofanewstandardonhealthrelatingtoradioemissionsThebottomofthefigureshowstherelationshipofthestandardstoradioequipmentandtelecommunicationsterminalequipment.Aparticularequipmentmayberadioequipment,telecommunicationsterminalequipmentorboth.Themodularapproachhasbeentakenbecause:-itminimizesthenumberofstandardsneeded.Becauseequipmentmayhavemultipleinterfacesandfunctionsitisnotpracticabletoproduceasinglestandardforeachpossiblecombinationoffunctionsthatmayoccurinanequipment.-itprovidesscopeforstandardstobeadded:-underarticle3.2whennewfrequencybandsareagreed;or-underarticle3.3shouldtheCommissiontakethenecessarydecisions;withoutrequiringalterationofstandardsthatarealreadypublished.ThepresentdocumentisbasedonTBR042[7].ThetechnicalrequirementsinthepresentdocumentareappliedunderArticle3.2oftheR&TTEDirectiveconcerningtheeffectiveuseofthespectrumallocatedtoterrestrial/spaceradiocommunicationsandorbitalresourcessoastoavoidharmfulinterference.Theserequirementsareintwomajorcategories:unwantedemissionslimits:toprotectotherradioservicesfromharmfulinterferencegeneratedbytheMESinnormaluse.MESControlandMonitoringFunctions(CMF):toprotectotherradioservicesfromunwantedtransmissionsfromtheMES.TheCMFineachMESiscapableofansweringtocommandsfromtheNetworkControlFacilities(NCF)foritsS-PCN.TherequirementsforNetworkControlFacilities(NCF)forS-PCNarecontainedinETS300735[8].Thedeterminationoftheparametersoftheuserearthstationsusingagivensatelliteconstellationfortheprotectionofthespectrumallocatedtothatsatelliteconstellation,isconsideredtobeundertheresponsibilityofthesatelliteoperatororthesatellitenetworkoperators.SIST EN 301 442:2001
ETSIETSIEN301442V1.1.1(2000-05)91ScopeThepresentdocumentappliestoMobileEarthStation(MES)radioequipmentwhichhavethefollowingcharacteristics:-theseMEShavebothtransmittedandreceivecapabilitiesandoperateinaSatellite-PersonalCommunicationsNetwork(S-PCN).AnS-PCNMESmaybehandheld,portable,vehicle-mounted,hostconnected,semi-fixedorfixedequipment,ormaybeanelementinamulti-modeterminal.Itmayconsistofanumberofmoduleswithassociatedconnectionsanduserinterface,ormaybeaselfcontainedsingleunit;-theseLMESsarecontrolledandmonitoredbyaNetworkControlFacility(NCF).TheNCFisoutsidethescopeofthepresentdocument;-iftheMESisanelementinamulti-modeterminal,unlessotherwisestatedinthepresentdocument,itsrequirementsapplyonlytotheS-PCNMESelementoftheterminaloperatingintheMSSfrequencybandsgivenintable1;-theseMESarecapableinoperatinginallorpartofthefrequencybandsshownintable1:Table1:MobileSatelliteService(MSS)frequencybandsMESMSSfrequencybandsTransmit(earthtospace)1980MHzto2010MHzReceive(spacetoearth)2170MHzto2200MHzThepresentdocumentisintendedtocovertheprovisionsofDirective1999/5/EC[1](R&TTEDirective)Article3.2whichstatesthat"….radioequipmentshallbesoconstructedthatiteffectivelyusesthespectrumallocatedtoterrestrial/spaceradiocommunicationsandorbitalresourcessoastoavoidharmfulinterference".Inadditiontothepresentdocument,otherENsthatspecifytechnicalrequirementsinrespectofessentialrequirementsunderotherpartsofArticle3oftheR&TTEDirective[1]mayapplytoequipmentwithinthescopeofthepresentdocument.NOTE:AlistofsuchENsisincludedontheETSIwebsite.2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.• Anon-specificreferencetoanETSshallalsobetakentorefertolaterversionspublishedasanENwiththesamenumber.[1]Directive1999/5/ECoftheEuropeanParliamentandoftheCouncilof9March1999onradioequipmentandtelecommunicationsequipmentandthemutualrecognitionoftheirconformity.[2]CCITTRecommendationO.153(1988):"Basicparametersforthemeasurementoferrorperformanceatbitratesbelowtheprimaryrate".[3]IECPublication60068-2-1:"Environmentaltesting-Part2:Tests.TestsA:Cold".[4]IECPublication60068-2-2:"Environmentaltesting-Part2:Tests.TestsB:Dryheat".SIST EN 301 442:2001
ETSIETSIEN301442V1.1.1(2000-05)10[5]IECPublication60068-2-36:"Environmentaltesting.Part2:Tests.TestFdb:Randomvibrationwideband-ReproducibilityMedium".[6]Directive98/34/ECoftheEuropeanParliamentandoftheCouncilof22June1998layingdownaprocedurefortheprovisionofinformationinthefieldoftechnicalstandardsandregulations.[7]TBR042:"SatellitePersonalCommunicationsNetworks(S-PCN);MobileEarthStations(MES),includinghandheldearthstations,forS-PCNinthe2,0GHzbandsundertheMobileSatelliteService(MSS);Terminalessentialrequirements".[8]ETS300735:"SatellitePersonalCommunicationsNetworks(S-PCN);NetworkControlFacilities(NCF)forMobileEarthStations(MES),includinghandheldearthstations,forS-PCNinthe1,6/2,4GHzandthe2,0GHzbands,providingvoiceand/or
...
SLOVENSKI STANDARD
SIST EN 301 442:2001
01-september-2001
6DWHOLWVNH]HPHOMVNHSRVWDMHLQVLVWHPL 6(6 +DUPRQL]LUDQL(1]DPRELOQH
]HPHOMVNHSRVWDMH 0(6 YNOMXþQR]URþQLPL]HPHOMVNLPLSRVWDMDPL]D63&1NL
GHOXMHMRYIUHNYHQþQHPSDVX*+]SULPRELOQLKVDWHOLWVNLKVWRULWYDKNL]DMHPD
ELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations
(MESs), including handheld earth stations, for Satellite Personal Communications
Networks (S-PCN) in the 2,0 GHz bands under the Mobile Satellite Service (MSS)
covering essential requirements under Article 3.2 of the R&TTE directive
Ta slovenski standard je istoveten z: EN 301 442 Version 1.1.1
ICS:
33.070.40 Satelit Satellite
SIST EN 301 442:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 442:2001
---------------------- Page: 2 ----------------------
SIST EN 301 442:2001
ETSI EN 301 442 V1.1.1 (2000-05)
Candidate Harmonized European Standard (Telecommunications series)
Satellite Earth Stations and Systems (SES);
Harmonized EN for Mobile Earth Stations (MESs),
including handheld earth stations, for Satellite
Personal Communications Networks (S-PCN)
in the 2,0 GHz bands under the Mobile Satellite
Service (MSS) covering essential requirements
under Article 3.2 of the R&TTE directive
---------------------- Page: 3 ----------------------
SIST EN 301 442:2001
2 ETSI EN 301 442 V1.1.1 (2000-05)
Reference
DEN/SES-000-TBR42
Keywords
satellite, earth station, MES, S-PCN, MSS,
regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.:+33492944200 Fax:+33493654716
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network
drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 442:2001
3 ETSI EN 301 442 V1.1.1 (2000-05)
Contents
Intellectual Property Rights.6
Foreword .6
Introduction .7
1 Scope.9
2 References.9
3 Definitions and abbreviations .10
3.1 Definitions.10
3.2 Abbreviations .11
4 Technical requirements specifications.12
4.1 Environmental profile.12
4.1.1 General.12
4.1.2 Temperature.12
4.1.3 Voltage.12
4.1.4 Vibration.12
4.2 Conformance requirements.13
4.2.1 Unwanted emissions outside the band 1 980,1 MHz to 2 009,9 MHz (carrier-on).13
4.2.1.1 Justification .13
4.2.1.2 Technical Requirement .13
4.2.1.3 Conformance Test .13
4.2.2 Unwanted emissions within the bands 1 980,1 MHz to 2 009,9 MHz, 1 978,1 MHz to 1 980,1 MHz
and 2 009,9 MHz to 2 011,9 MHz (carrier-on).13
4.2.2.1 Justification .13
4.2.2.2 Technical Requirement .14
4.2.2.3 Conformance Test .14
4.2.3 Unwanted emissions in carrier-off state.14
4.2.3.1 Justification .14
4.2.3.2 Technical Requirement .14
4.2.3.3 Conformance Test .15
4.2.4 MES Control and Monitoring Functions (CMF).15
4.2.4.1 Self-monitoring functions / Processor monitoring.15
4.2.4.1.1 Justification.15
4.2.4.1.2 Technical Requirement.15
4.2.4.1.3 Conformance Test.15
4.2.4.2 Self-monitoring functions / Transmit frequency generation sub-system monitoring.15
4.2.4.2.1 Justification.15
4.2.4.2.2 Technical Requirement.15
4.2.4.2.3 Conformance Test.16
4.2.4.3 Network control authorization.16
4.2.4.3.1 Justification.16
4.2.4.3.2 Technical Requirement.16
4.2.4.3.3 Conformance Test.16
4.2.4.4 Network control reception.16
4.2.4.4.1 Transmit frequency control.16
4.2.4.4.1.1 Justification.16
4.2.4.4.1.2 Technical Requirement .16
4.2.4.4.1.3 Conformance Test.16
4.2.4.5 Fellow radio stations in a dual-mode or multi-mode terminal.16
4.2.4.5.1 Justification.16
4.2.4.5.2 Technical Requirement.16
4.2.4.5.3 Conformance Test.17
4.2.5 Equipment identity.17
4.2.5.1 Justification .17
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 442:2001
4 ETSI EN 301 442 V1.1.1 (2000-05)
4.2.5.2 Technical Requirement .17
4.2.5.3 Conformance Test .17
5 Testing for compliance with technical requirements .17
5.1 Environmental conditions for testing.17
5.1.1 Specification of the environmental test conditions .17
5.1.2 Tests under extreme voltage conditions.17
5.2 Essential radio test suites.18
5.2.1 General.18
5.2.1.1 Presentation of equipment for testing purposes.18
5.2.1.2 Description of equipment .18
5.2.1.3 Testing of host-connected equipment and plug-in modules .19
5.2.1.3.1 Alternative approaches .19
5.2.1.3.2 Alternative A: combined equipment.19
5.2.1.3.3 Alternative B: use of a test jig .19
5.2.1.4 CMF / Special Test Equipment (STE) .19
5.2.1.5 General test requirements.20
5.2.1.5.1 MES test modes.20
5.2.1.5.2 Special Test Equipment.20
5.2.1.5.2.1 Use of STE for control and monitoring functions tests.20
5.2.1.5.2.2 Test modulating signal .21
5.2.1.5.3 Laboratory Test Equipment (LTE) .21
5.2.1.5.4 Method of test for MES RF emissions according to equipment type.22
5.2.1.5.5 Procedures for measurement of MES RF radiated emissions .22
5.2.1.5.5.1 General.22
5.2.1.5.5.1.1 Test site .22
5.2.1.5.5.1.2 Test set up for radiated emissions of the MES .22
5.2.1.5.5.1.3 Reference position of the MES.23
5.2.1.5.5.2 Measurement procedure for radiated emissions (peak).23
5.2.1.5.5.2.1 Measurement procedure for peak radiated emissions of the MES.23
5.2.1.5.5.2.2 Measurement procedure for peak radiated emissions of the cabinet .25
5.2.1.5.5.3 Measurement procedure for radiated emissions (average).25
5.2.1.5.5.3.1 Measurement procedure for average radiated emissions of the MES.25
5.2.1.5.5.3.2 Measurement procedure for average radiated emissions of the cabinet.26
5.2.1.5.6 Procedures for measurement of MES RF conducted emissions.26
5.2.1.5.6.1 General.26
5.2.1.5.6.1.1 Test site .27
5.2.1.5.6.1.2 Test set-up .27
5.2.1.5.6.2 Measurement procedure for conducted emissions (peak) .27
5.2.1.5.6.3 Measurement procedure for conducted emissions (average).27
5.2.1.5.7 Interpretation of the measurement results.28
5.2.1.5.8 Test report .28
5.2.2 Unwanted emissions outside the band 1 980,1 MHz to 2 009,9 MHz (carrier-on).28
5.2.2.1 Method of test .28
5.2.2.2 Peak measurement .29
5.2.2.3 Average measurement.29
5.2.2.4 Test requirements.29
5.2.3 Unwanted emissions within the bands 1 980,1 MHz to 2 009,9 MHz, 1 978,1 MHz to 1 980,1 MHz
and 2 009,9 MHz to 2 011,9 MHz (carrier-on).29
5.2.3.1 Method of test .29
5.2.3.2 Measurement method .30
5.2.3.3 Test requirements.30
5.2.4 Unwanted emissions in carrier-off state.30
5.2.4.1 Method of test .30
5.2.4.2 Measurement method .31
5.2.4.3 Test requirements.31
5.2.5 MES Control and Monitoring Functions (CMF).31
5.2.5.1 Self-monitoring functions / Processor Monitoring .31
5.2.5.2 Self-monitoring functions / Transmit frequency generation sub-system monitoring.31
5.2.5.3 Network control authorization.31
5.2.5.3.1 Method of test.31
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 442:2001
5 ETSI EN 301 442 V1.1.1 (2000-05)
5.2.5.3.2 Test procedure .32
5.2.5.3.3 Test requirement.32
5.2.5.4 Network control reception.32
5.2.5.4.1 Transmit frequency control.32
5.2.5.4.1.1 Method of test .32
5.2.5.4.1.2 Test procedure .32
5.2.5.4.1.3 Test requirement .33
5.2.5.5 Fellow radio stations in a dual-mode or multi-mode terminal.33
5.2.5.5.1 Method of test.33
5.2.5.5.2 Test procedure .33
5.2.5.5.3 Test requirements .33
5.2.6 Equipment identity.33
5.2.6.1 Method of test .33
5.2.6.2 Test procedure.34
5.2.6.3 Test requirements.34
Annex A (normative): The EN Requirements Table (EN-RT) .35
Annex B (informative): Explanation of nominated bandwidth .36
B.1 Introduction.36
B.2 Interpretation of Parameters [Bn, f ,a,b] .36
c
B.3 Choice of nominated bandwidth .36
B.4 Maximum value for nominated bandwidth .38
Bibliography.40
History.41
ETSI
---------------------- Page: 7 ----------------------
SIST EN 301 442:2001
6 ETSI EN 301 442 V1.1.1 (2000-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server
(http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Satellite Earth Stations and Systems (SES).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [6] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
National transposition dates
Date of adoption of this EN: 28 April 2000
Date of latest announcement of this EN (doa): 31 July 2000
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2001
Date of withdrawal of any conflicting National Standard (dow): 31 January 2001
ETSI
---------------------- Page: 8 ----------------------
SIST EN 301 442:2001
7 ETSI EN 301 442 V1.1.1 (2000-05)
Introduction
ETSI has designed a modular structure for the standards. Each standard is a module in the structure. The modular
structure is shown in figure 1.
Disability*
3.3f
Emergency*
3.3e
Fraud*
3.3d
3.3c
Privacy*
No harm to the network*
3.3b
* If needed
Scoped by
Inter-working via the network*
equipment
3.3a class or type
Inter-working with the network
Use of spectrum
3.2
New radio harmonised standards
Spectrum
Scoped by frequency and/or equipment type
Radio Product EMC
Existing EMC standards to be replaced by
3.1b a new single multi-part standard
EMC
Generic and base standards also notified under EMC Directive
New standard for Health for radio
(if needed)
3.1a
Safety
Standards also notified under LVD Directive
(incl acoustic safety if needed)
Non-radio Radio (RE)
TTE Non-TTE
Figure 1: Modular structure for the various standards used under the R&TTE Directive
The left hand edge of the figure shows the different subclauses of Article 3 of the Directive.
ETSI
---------------------- Page: 9 ----------------------
SIST EN 301 442:2001
8 ETSI EN 301 442 V1.1.1 (2000-05)
For article 3.3 various horizontal boxes are shown. Their dotted lines indicate that no essential requirements in these
areas have yet been adopted by the Commission. If such essential requirements are adopted, they will be elaborated in
individual standards whose scope is likely to be specified by function or interface type.
The vertical boxes show the standards under article 3.2 for the use of the radio spectrum. The scopes of these standards
are specified either by frequency (normally in the case where frequency bands are harmonized) or by radio equipment
type.
For article 3.1(b), the diagram shows the new single multi-part product EMC standard for radio, and the existing
collection of generic and base standards currently used under the EMC Directive. The parts of this new standard will
become available in the second half of 2 000, and the existing separate EMC standards will be used until it is available.
For article 3.1(a) the diagram shows the existing safety standards currently used under the LVD Directive and the
possibility of a new standard on health relating to radio emissions
The bottom of the figure shows the relationship of the standards to radio equipment and telecommunications terminal
equipment. A particular equipment may be radio equipment, telecommunications terminal equipment or both.
The modular approach has been taken because:
- it minimizes the number of standards needed. Because equipment may have multiple interfaces and functions it is
not practicable to produce a single standard for each possible combination of functions that may occur in an
equipment.
- it provides scope for standards to be added:
- under article 3.2 when new frequency bands are agreed; or
- under article 3.3 should the Commission take the necessary decisions;
without requiring alteration of standards that are already published.
The present document is based on TBR 042 [7].
The technical requirements in the present document are applied under Article 3.2 of the R&TTE Directive concerning
the effective use of the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid
harmful interference. These requirements are in two major categories:
unwanted emissions limits: to protect other radio services from harmful interference generated by the MES in normal
use.
MES Control and Monitoring Functions (CMF): to protect other radio services from unwanted transmissions from
the MES. The CMF in each MES is capable of answering to commands from the Network Control Facilities (NCF) for
its S-PCN.
The requirements for Network Control Facilities (NCF) for S-PCN are contained in ETS 300 735 [8].
The determination of the parameters of the user earth stations using a given satellite constellation for the protection of
the spectrum allocated to that satellite constellation, is considered to be under the responsibility of the satellite operator
or the satellite network operators.
ETSI
---------------------- Page: 10 ----------------------
SIST EN 301 442:2001
9 ETSI EN 301 442 V1.1.1 (2000-05)
1 Scope
The present document applies to Mobile Earth Station (MES) radio equipment which have the following characteristics:
- these MES have both transmitted and receive capabilities and operate in a Satellite-Personal Communications
Network (S-PCN). An S-PCN MES may b
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.