ETSI EN 301 908-8 V1.1.1 (2002-01)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 8: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 8: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
DEN/ERM-TFES-001-8
Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Bazne postaje (BS) in uporabniška oprema (UE) za celično omrežje IMT-2000 tretje generacije - 8. del: Harmonizirani EN za IMT-2000, TDMA “Single-Carrier” (UWC 136) (UE), ki zajema bistvene zahteve člena 3.2 direktive R&TTE
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 301 908-8:2002
01-november-2002
(OHNWURPDJQHWQD]GUXåOMLYRVW (0& LQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50
%D]QHSRVWDMH %6 LQXSRUDEQLãNDRSUHPD 8( ]DFHOLþQRRPUHåMH,07WUHWMH
JHQHUDFLMHGHO +DUPRQL]LUDQL(1]D,077'0$³6LQJOH&DUULHU´ 8:&
8( NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS)
and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 8:
Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential
requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 908-8 Version 1.1.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 908-8:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 908-8:2002
---------------------- Page: 2 ----------------------
SIST EN 301 908-8:2002
ETSI EN 301 908-8 V1.1.1 (2002-01)
Candidate Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Base Stations (BS) and User Equipment (UE) for
IMT-2000 Third-Generation cellular networks;
Part 8: Harmonized EN for IMT-2000,
TDMA Single-Carrier (UWC 136) (UE)
covering essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 3 ----------------------
SIST EN 301 908-8:2002
2 ETSI EN 301 908-8 V1.1.1 (2002-01)
Reference
DEN/ERM-TFES-001-8
Keywords
3G, cellular, digital, edge, IMT-2000, mobile,
radio, regulation, TDMA, UMTS, UWC 136
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2002.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 908-8:2002
3 ETSI EN 301 908-8 V1.1.1 (2002-01)
Contents
Intellectual Property Rights.6
Foreword.6
Introduction .8
1 Scope.10
2 References.10
3 Definitions and abbreviations.11
3.1 Definitions.11
3.2 Abbreviations.12
4 Technical requirements specifications.12
4.1 Environmental profile.12
4.2 Conformance requirements.12
4.2.1 Introduction.12
4.2.2 Conformance requirements (30 kHz).13
4.2.2.1 Adjacent and alternate channel power due to modulation.13
4.2.2.1.1 Definition.13
4.2.2.1.2 Limits.13
4.2.2.1.3 Conformance.13
4.2.2.2 Out of band power arising from switching transients .14
4.2.2.2.1 Definition.14
4.2.2.2.2 Limits.14
4.2.2.2.3 Conformance.14
4.2.2.3 Harmonic and spurious emissions (conducted).14
4.2.2.3.1 Definition.14
4.2.2.3.2 Limits.14
4.2.2.3.3 Conformance.15
4.2.2.4 RF power output.15
4.2.2.4.1 Definition.15
4.2.2.4.2 Limits.16
4.2.2.4.3 Conformance.16
4.2.2.5 Blocking and spurious-response rejection.17
4.2.2.5.1 Definition.17
4.2.2.5.2 Limits.17
4.2.2.5.3 Conformance.18
4.2.2.6 Adjacent and alternate channel desensitization.18
4.2.2.6.1 Definition.18
4.2.2.6.2 Limits.18
4.2.2.6.3 Conformance.18
4.2.2.7 Receiver spurious emissions (idle mode).18
4.2.2.7.1 Definition.18
4.2.2.7.2 Limits.18
4.2.2.7.3 Conformance.18
4.2.3 Conformance requirements (200 kHz).18
4.2.3.1 Output RF spectrum.19
4.2.3.1.1 Definition.19
4.2.3.1.2 Limits.19
4.2.3.1.3 Conformance.24
4.2.3.2 Transmitter conducted spurious emissions.24
4.2.3.2.1 Definition.24
4.2.3.2.2 Limits.24
4.2.3.2.3 Conformance.24
4.2.3.3 Transmitter output power.25
4.2.3.3.1 Definition.25
4.2.3.3.2 Limits.25
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 908-8:2002
4 ETSI EN 301 908-8 V1.1.1 (2002-01)
4.2.3.3.3 Conformance.28
4.2.3.4 Impact of interference on receiver performance .28
4.2.3.4.1 Introduction.28
4.2.3.4.2 Blocking and spurious response .28
4.2.3.4.3 Intermodulation rejection.29
4.2.3.5 Co-channel rejection.29
4.2.3.5.1 Definition.29
4.2.3.5.2 Limits.29
4.2.3.5.3 Conformance.30
4.2.3.6 Receiver adjacent channel selectivity.30
4.2.3.6.1 Definition.30
4.2.3.6.2 Limits.31
4.2.3.6.3 Conformance.31
4.2.3.7 Receiver spurious emissions (idle mode).31
4.2.3.7.1 Definition.31
4.2.3.7.2 Limits.32
4.2.3.7.3 Conformance.32
5 Testing for compliance with technical requirements.32
5.1 Conditions for testing .32
5.2 Test equipment conditions.32
5.2.1 Standard test equipment (30 kHz).32
5.2.1.1 Standard test source.32
5.2.1.2 Standard test receiver .33
5.2.1.3 Spectrum analyser or measuring receiver .33
5.2.1.4 Modulation accuracy measurement equipment .34
5.2.1.5 Standard BER/WER test equipment.34
5.2.1.6 Standard Protocol Test Equipment.34
5.2.1.7 Standard Channel Simulator.34
5.3 Interpretation of the measurement results .36
5.4 Essential radio test suites.38
5.4.1 Essential radio test suites (30 kHz).38
5.4.1.1 Spectrum emissions mask.38
5.4.1.1.1 Adjacent and alternate channel power due to modulation .38
5.4.1.1.2 Out of band power arising from switching transients.38
5.4.1.2 Transmitter conducted spurious emissions.39
5.4.1.3 Accuracy of maximum output power.39
5.4.1.4 Impact of interference on receiver performance .39
5.4.1.5 Receiver adjacent channel selectivity.40
5.4.1.6 Receiver conducted spurious emissions.40
5.4.1.6.1 Initial conditions.40
5.4.1.6.2 Test procedure.40
5.4.2 Essential radio test suites (200 kHz).41
5.4.2.1 Spectrum emissions mask.41
5.4.2.1.1 Initial conditions.41
5.4.2.1.2 Test procedure.41
5.4.2.2 Conducted spurious emissions .43
5.4.2.2.1 Initial conditions.43
5.4.2.2.2 Procedure.43
5.4.2.3 Accuracy of maximum output power.44
5.4.2.3.1 Introduction.44
5.4.2.3.2 Method of test for equipment with a permanent antenna connector.44
5.4.2.3.3 Method of test for equipment with an integral antenna .45
5.4.2.4 Impact of interference on receiver performance .46
5.4.2.4.1 Blocking and spurious response .46
5.4.2.4.2 Intermodulation rejection.50
5.4.2.5 Receiver co-channel rejection .52
5.4.2.5.1 Initial conditions.52
5.4.2.5.2 Test procedure.52
5.4.2.6 Receiver adjacent channel selectivity.53
5.4.2.6.1 Initial conditions.53
5.4.2.7 Receiver conducted spurious emissions.56
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 908-8:2002
5 ETSI EN 301 908-8 V1.1.1 (2002-01)
5.4.2.7.1 Initial conditions.56
5.4.2.7.2 Test procedure.56
Annex A (normative): The EN Requirements Table (EN-RT) .57
Annex B (normative): Propagation conditions.59
B.1 Simple wideband propagation model .59
B.2 Doppler spectrum types.59
B.3 Propagation models.60
B.4 Receiver reference sensitivity.62
Annex C (informative): Normal and extreme test conditions (TC) .66
C.1 Power sources and ambient temperatures (TC2).66
C.1.1 Normal test conditions (TC2.1).66
C.1.2 Extreme test conditions (TC2.2).66
Annex D (informative): The EN title in the official languages .68
Annex E (informative): Bibliography.69
History .70
ETSI
---------------------- Page: 7 ----------------------
SIST EN 301 908-8:2002
6 ETSI EN 301 908-8 V1.1.1 (2002-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
The present document is part 8 of a multi-part deliverable covering the Base Stations (BS) and User Equipment (UE)
for IMT-2000 Third-Generation cellular networks, as identified below:
Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 10: "Harmonized EN for IMT-2000 FDMA/TDMA (DECT) covering essential requirements of article 3.2 of
the R&TTE Directive".
ETSI
---------------------- Page: 8 ----------------------
SIST EN 301 908-8:2002
7 ETSI EN 301 908-8 V1.1.1 (2002-01)
Technical specifications relevant to Directive 1999/5/EC [1] are given in annex A.
National transposition dates
Date of adoption of this EN: 4 January 2002
Date of latest announcement of this EN (doa): 30 April 2002
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 October 2002
Date of withdrawal of any conflicting National Standard (dow): 31 October 2003
ETSI
---------------------- Page: 9 ----------------------
SIST EN 301 908-8:2002
8 ETSI EN 301 908-8 V1.1.1 (2002-01)
Introduction
The present document is part of a set of standards designed to fit in a modular structure to cover all radio and
telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure.
The modular structure is shown in figure 1.
Disability*
3.3f
Emergency*
3.3e
Fraud*
3.3d
3.3c
Privacy*
No harm to the network*
3.3b
* If needed
Scoped by
Interworking via the network*
equipment
3.3a class or type
Interworking with the network
Use of spectrum
3.2
New radio harmonized standards
Spectrum
Scoped by frequency and/or equipment type
Radio Product EMC
EN 301 489 multi-part EMC standards
3.1b
EMC
Generic and product standards also notified under EMC Directive
- If needed, new standards for human exposure to
Electromagnetic Fields,
- if needed, new standards for acoustic safety
3.1a
Standards also notified under LV Directive
Safety
Non-radio Radio (RE)
TTE Non-TTE
Figure 1: Modular structure for the various standards used under the R&TTE Directive
ETSI
---------------------- Page: 10 ----------------------
SIST EN 301 908-8:2002
9 ETSI EN 301 908-8 V1.1.1 (2002-01)
The left hand edge of figure 1 shows the different clauses of article 3 of the R&TTE Directive [1].
For article 3.3 various horizontal boxes are shown. Dotted lines indicate that at the time of publication of the present
document essential requirements in these areas have to be adopted by the Commission. If such essential requirements
are adopted, and as far and as long as they are applicable, they will justify individual standards whose scope is likely to
be specified by function or interface type.
The vertical boxes show the standards under article 3.2 for the use of the radio spectrum by radio equipment. The
scopes of these standards are specified either by frequency (normally in the case where frequency bands are
harmonized) or by radio equipment type.
For article 3.1b figure 1 shows EN 301 489 [7], the multi-part product EMC standard for radio used under the EMC
Directive [2].
For article 3.1a figure 1 shows the existing safety standards currently used under the LV Directive [3] and new
standards covering human exposure to electromagnetic fields. New standards covering acoustic safety may also be
required.
The bottom of figure 1 shows the relationship of the standards to radio equipment and telecommunications terminal
equipment. A particular equipment may be radio equipment, telecommunications termina
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.