ETSI EN 301 598 V2.2.1 (2022-03)
TV White Space Devices (TVWSD); Wireless Access Systems operating in the 470 MHz to 694 MHz TV broadcast band; Harmonised Standard for access to radio spectrum
TV White Space Devices (TVWSD); Wireless Access Systems operating in the 470 MHz to 694 MHz TV broadcast band; Harmonised Standard for access to radio spectrum
REN/BRAN-230019
TV-naprave za kanalske presledke (TVWSD) - Brezžični dostopovni sistemi, ki delujejo v TV sprejemnem kanalu od 470 MHz do 694 MHz - Harmonizirani standard za dostop do radijskega spektra
Ta dokument določa tehnične značilnosti in metode merjenja za TV-naprave za kanalske presledke (TVWSD), ki delujejo v TV sprejemnem kanalu od 470 MHz do 694 MHz in so vključene v bazo podatkov o TV-napravah za kanalske presledke (TVWSDB).
Ta dokument se uporablja za naslednji kategoriji radijske opreme:
1) primarne TV-naprave za kanalske presledke;
2) sekundarne TV-naprave za kanalske presledke.
Ta dokument se uporablja za TV-naprave za kanalske presledke z vgrajeno, namensko ali zunanjo anteno, pri čemer so TV-naprave za kanalske presledke z zunanjo anteno zajete le v primeru fiksne uporabe.
OPOMBA: Razmerje med tem dokumentom in bistvenimi zahtevami člena 3.2 Direktive 2014/53/EU [i.3] je podano v dodatku A.
General Information
Buy Standard
Standards Content (Sample)
ETSI EN 301 598 V2.2.1 (2022-03)
HARMONISED EUROPEAN STANDARD
TV White Space Devices (TVWSD);
Wireless Access Systems operating in the
470 MHz to 694 MHz TV broadcast band;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 ETSI EN 301 598 V2.2.1 (2022-03)
Reference
REN/BRAN-230019
Keywords
access, broadband, CRS, FWA, LAN, M2M,
mobile, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 301 598 V2.2.1 (2022-03)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definition of terms, symbols and abbreviations . 11
3.1 Terms . 11
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental profile . 15
4.2 Conformance requirements . 15
4.2.1 Void . 15
4.2.2 Equipment types . 15
4.2.2.1 Definition . 15
4.2.2.2 Equipment Type A . 15
4.2.2.3 Equipment Type B . 15
4.2.3 Nominal Channel Bandwidth and Total Nominal Channel Bandwidth . 15
4.2.3.1 Definitions . 15
4.2.3.2 Requirements . 15
4.2.4 RF power and RF power spectral density . 16
4.2.4.1 Definitions . 16
4.2.4.1.1 RF power . 16
4.2.4.1.2 RF power spectral density . 16
4.2.4.2 Limits . 16
4.2.4.3 Conformance . 16
4.2.5 Transmitter unwanted emissions . 16
4.2.5.1 Transmitter unwanted emissions outside the 470 MHz to 694 MHz band . 16
4.2.5.1.1 Definition. 16
4.2.5.1.2 Limits . 17
4.2.5.1.3 Conformance . 17
4.2.5.2 Transmitter unwanted emissions within the 470 MHz to 694 MHz band . 17
4.2.5.2.1 Definition. 17
4.2.5.2.2 Limits . 17
4.2.5.2.3 Conformance . 18
4.2.6 Transmitter Reverse Intermodulation Attenuation . 18
4.2.6.1 Definition . 18
4.2.6.2 Limits . 18
4.2.6.3 Conformance . 18
4.2.7 Control and monitoring . 18
4.2.7.1 Control and monitoring mechanisms . 18
4.2.7.2 TVWSDB identification . 19
4.2.7.2.1 Applicability . 19
4.2.7.2.2 Definition. 19
4.2.7.2.3 Requirements . 19
4.2.7.2.4 Conformance . 19
4.2.7.3 Data exchange and compliance with parameters . 19
4.2.7.3.1 Applicability . 19
4.2.7.3.2 Device parameters, operational parameters and channel usage . 19
4.2.7.3.3 Transmission in compliance with parameters . 22
4.2.7.3.4 Reporting of device parameters . 23
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 301 598 V2.2.1 (2022-03)
4.2.7.3.5 Reporting of channel usage parameters . 23
4.2.7.3.6 Functionality of a primary TVWSD to support secondary TVWSDs . 23
4.2.7.3.7 Conformance . 24
4.2.7.4 Primary TVWSD update . 25
4.2.7.4.1 Definition. 25
4.2.7.4.2 Requirements . 25
4.2.7.4.3 Conformance . 25
4.2.7.5 Secondary TVWSD update . 25
4.2.7.5.1 Applicability . 25
4.2.7.5.2 Definition. 25
4.2.7.5.3 Requirements . 25
4.2.7.5.4 Conformance . 26
4.2.8 Receiver Sensitivity Level . 26
4.2.8.1 Applicability. 26
4.2.8.2 Definition . 26
4.2.8.3 Performance Criteria . 26
4.2.8.4 Limits . 26
4.2.8.5 Conformance . 26
4.2.9 Adjacent Channel Selectivity . 26
4.2.9.1 Applicability. 26
4.2.9.2 Definition . 26
4.2.9.3 Performance Criteria . 26
4.2.9.4 Limits . 26
4.2.9.5 Conformance . 27
4.2.10 Receiver Blocking . 27
4.2.10.1 Applicability. 27
4.2.10.2 Definition . 27
4.2.10.3 Performance Criteria . 27
4.2.10.4 Limits . 27
4.2.10.5 Conformance . 27
4.2.11 Receiver spurious emissions . 28
4.2.11.1 Definition . 28
4.2.11.2 Limits . 28
4.2.11.3 Conformance . 28
4.2.12 Geo-Location capability . 28
4.2.12.1 Definition . 28
4.2.12.2 Requirements . 28
4.2.12.3 Conformance . 29
4.2.13 User Access Restrictions . 29
4.2.13.1 Definition / General. 29
4.2.13.2 Parameters subject to User Access Restrictions . 29
4.2.13.3 Conformance . 29
5 Testing for compliance with technical requirements . 29
5.1 Introduction . 29
5.2 Conditions for testing . 30
5.2.1 Normal and extreme test conditions. 30
5.2.2 Antennas . 30
5.2.3 Conducted measurements, radiated measurements, and relative measurements . 30
5.2.4 Transmit operating modes . 30
5.2.5 Requirements for the test modulation . 31
5.2.6 Communication between test TVWSDB, primary and secondary UUT . 31
5.2.7 Operational Parameter set . 32
5.3 Void . 32
5.4 Essential test suites . 32
5.4.1 Product Information . 32
5.4.2 RF output power . 33
5.4.2.1 Test conditions . 33
5.4.2.2 Test method . 33
5.4.2.2.1 Conducted measurements . 33
5.4.2.2.2 Radiated measurements . 34
5.4.3 Power Spectral Density and Transmitter unwanted emissions within the 470 MHz to 694 MHz band . 35
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 301 598 V2.2.1 (2022-03)
5.4.3.1 Test conditions . 35
5.4.3.2 Test method . 35
5.4.3.2.1 Conducted measurement. 35
5.4.3.2.2 Radiated measurement . 37
5.4.4 Transmitter unwanted emissions outside the 470 MHz to 694 MHz band . 37
5.4.4.1 Purpose . 37
5.4.4.2 Test conditions . 38
5.4.4.3 Test method . 38
5.4.4.3.1 Conducted measurements . 38
5.4.4.3.2 Radiated measurements . 40
5.4.5 Transmitter Intermodulation . 40
5.4.5.1 Objective and Measurement Arrangement . 40
5.4.5.2 Test Conditions . 40
5.4.5.3 Test Method . 40
5.4.5.3.1 Conducted Measurements. 40
5.4.5.3.2 Radiated measurements . 41
5.4.6 Primary TVWSD update . 41
5.4.6.1 Introduction and Test conditions . 41
5.4.6.2 Test method . 42
5.4.6.2.1 Conducted Measurements. 42
5.4.6.2.2 Radiated Measurements . 42
5.4.7 Lost connection between the primary TVWSD and the TVWSDB . 42
5.4.7.1 Test conditions . 42
5.4.7.2 Test method . 43
5.4.7.2.1 Conducted Measurements. 43
5.4.7.2.2 Radiated Measurements . 43
5.4.8 Secondary TVWSD update - specific parameters invalidated . 44
5.4.8.1 Test conditions . 44
5.4.8.2 Test method . 44
5.4.8.2.1 Conducted Measurements. 44
5.4.9 Secondary TVWSD update - loss of communication with primary TVWSD . 45
5.4.9.1 Test conditions . 45
5.4.9.2 Test method . 45
5.4.9.2.1 Conducted Measurements. 45
5.4.9.2.2 Radiated Measurements . 45
5.4.10 Receiver Sensitivity level . 45
5.4.10.1 Test conditions . 45
5.4.10.2 Test method . 45
5.4.10.2.1 Conducted Measurements. 45
5.4.10.2.2 Radiated measurements . 46
5.4.11 Adjacent Channel Selectivity . 46
5.4.11.1 Test conditions . 46
5.4.11.2 Test Method . 46
5.4.11.2.1 Conducted measurements . 46
5.4.11.2.2 Radiated measurements . 47
5.4.12 Receiver Blocking . 47
5.4.12.1 Test conditions . 47
5.4.12.2 Test Method . 48
5.4.12.2.1 Conducted measurements . 48
5.4.12.2.2 Radiated measurements . 49
5.4.13 Receiver spurious emission . 49
5.4.13.1 Purpose . 49
5.4.13.2 Test conditions .
...
SLOVENSKI STANDARD
SIST EN 301 598 V2.2.1:2022
01-maj-2022
TV-naprave za kanalske presledke (TVWSD) - Brezžični dostopovni sistemi, ki
delujejo v TV sprejemnem kanalu od 470 MHz do 694 MHz - Harmonizirani standard
za dostop do radijskega spektra
TV White Space Devices (TVWSD) - Wireless Access Systems operating in the 470 MHz
to 694 MHz TV broadcast band - Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 301 598 V2.2.1 (2022-03)
ICS:
33.040.99 Druga oprema za Other equipment for
telekomunikacijske sisteme telecommunication systems
SIST EN 301 598 V2.2.1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 598 V2.2.1:2022
---------------------- Page: 2 ----------------------
SIST EN 301 598 V2.2.1:2022
ETSI EN 301 598 V2.2.1 (2022-03)
HARMONISED EUROPEAN STANDARD
TV White Space Devices (TVWSD);
Wireless Access Systems operating in the
470 MHz to 694 MHz TV broadcast band;
Harmonised Standard for access to radio spectrum
---------------------- Page: 3 ----------------------
SIST EN 301 598 V2.2.1:2022
2 ETSI EN 301 598 V2.2.1 (2022-03)
Reference
REN/BRAN-230019
Keywords
access, broadband, CRS, FWA, LAN, M2M,
mobile, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 598 V2.2.1:2022
3 ETSI EN 301 598 V2.2.1 (2022-03)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definition of terms, symbols and abbreviations . 11
3.1 Terms . 11
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental profile . 15
4.2 Conformance requirements . 15
4.2.1 Void . 15
4.2.2 Equipment types . 15
4.2.2.1 Definition . 15
4.2.2.2 Equipment Type A . 15
4.2.2.3 Equipment Type B . 15
4.2.3 Nominal Channel Bandwidth and Total Nominal Channel Bandwidth . 15
4.2.3.1 Definitions . 15
4.2.3.2 Requirements . 15
4.2.4 RF power and RF power spectral density . 16
4.2.4.1 Definitions . 16
4.2.4.1.1 RF power . 16
4.2.4.1.2 RF power spectral density . 16
4.2.4.2 Limits . 16
4.2.4.3 Conformance . 16
4.2.5 Transmitter unwanted emissions . 16
4.2.5.1 Transmitter unwanted emissions outside the 470 MHz to 694 MHz band . 16
4.2.5.1.1 Definition. 16
4.2.5.1.2 Limits . 17
4.2.5.1.3 Conformance . 17
4.2.5.2 Transmitter unwanted emissions within the 470 MHz to 694 MHz band . 17
4.2.5.2.1 Definition. 17
4.2.5.2.2 Limits . 17
4.2.5.2.3 Conformance . 18
4.2.6 Transmitter Reverse Intermodulation Attenuation . 18
4.2.6.1 Definition . 18
4.2.6.2 Limits . 18
4.2.6.3 Conformance . 18
4.2.7 Control and monitoring . 18
4.2.7.1 Control and monitoring mechanisms . 18
4.2.7.2 TVWSDB identification . 19
4.2.7.2.1 Applicability . 19
4.2.7.2.2 Definition. 19
4.2.7.2.3 Requirements . 19
4.2.7.2.4 Conformance . 19
4.2.7.3 Data exchange and compliance with parameters . 19
4.2.7.3.1 Applicability . 19
4.2.7.3.2 Device parameters, operational parameters and channel usage . 19
4.2.7.3.3 Transmission in compliance with parameters . 22
4.2.7.3.4 Reporting of device parameters . 23
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 598 V2.2.1:2022
4 ETSI EN 301 598 V2.2.1 (2022-03)
4.2.7.3.5 Reporting of channel usage parameters . 23
4.2.7.3.6 Functionality of a primary TVWSD to support secondary TVWSDs . 23
4.2.7.3.7 Conformance . 24
4.2.7.4 Primary TVWSD update . 25
4.2.7.4.1 Definition. 25
4.2.7.4.2 Requirements . 25
4.2.7.4.3 Conformance . 25
4.2.7.5 Secondary TVWSD update . 25
4.2.7.5.1 Applicability . 25
4.2.7.5.2 Definition. 25
4.2.7.5.3 Requirements . 25
4.2.7.5.4 Conformance . 26
4.2.8 Receiver Sensitivity Level . 26
4.2.8.1 Applicability. 26
4.2.8.2 Definition . 26
4.2.8.3 Performance Criteria . 26
4.2.8.4 Limits . 26
4.2.8.5 Conformance . 26
4.2.9 Adjacent Channel Selectivity . 26
4.2.9.1 Applicability. 26
4.2.9.2 Definition . 26
4.2.9.3 Performance Criteria . 26
4.2.9.4 Limits . 26
4.2.9.5 Conformance . 27
4.2.10 Receiver Blocking . 27
4.2.10.1 Applicability. 27
4.2.10.2 Definition . 27
4.2.10.3 Performance Criteria . 27
4.2.10.4 Limits . 27
4.2.10.5 Conformance . 27
4.2.11 Receiver spurious emissions . 28
4.2.11.1 Definition . 28
4.2.11.2 Limits . 28
4.2.11.3 Conformance . 28
4.2.12 Geo-Location capability . 28
4.2.12.1 Definition . 28
4.2.12.2 Requirements . 28
4.2.12.3 Conformance . 29
4.2.13 User Access Restrictions . 29
4.2.13.1 Definition / General. 29
4.2.13.2 Parameters subject to User Access Restrictions . 29
4.2.13.3 Conformance . 29
5 Testing for compliance with technical requirements . 29
5.1 Introduction . 29
5.2 Conditions for testing . 30
5.2.1 Normal and extreme test conditions. 30
5.2.2 Antennas . 30
5.2.3 Conducted measurements, radiated measurements, and relative measurements . 30
5.2.4 Transmit operating modes . 30
5.2.5 Requirements for the test modulation . 31
5.2.6 Communication between test TVWSDB, primary and secondary UUT . 31
5.2.7 Operational Parameter set . 32
5.3 Void . 32
5.4 Essential test suites . 32
5.4.1 Product Information . 32
5.4.2 RF output power . 33
5.4.2.1 Test conditions . 33
5.4.2.2 Test method . 33
5.4.2.2.1 Conducted measurements . 33
5.4.2.2.2 Radiated measurements . 34
5.4.3 Power Spectral Density and Transmitter unwanted emissions within the 470 MHz to 694 MHz band . 35
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 598 V2.2.1:2022
5 ETSI EN 301 598 V2.2.1 (2022-03)
5.4.3.1 Test conditions . 35
5.4.3.2 Test method . 35
5.4.3.2.1 Conducted measurement. 35
5.4.3.2.2 Radiated measurement . 37
5.4.4 Transmitter unwanted emissions outside the 470 MHz to 694 MHz band . 37
5.4.4.1 Purpose . 37
5.4.4.2 Test conditions . 38
5.4.4.3 Test method . 38
5.4.4.3.1 Conducted measurements . 38
5.4.4.3.2 Radiated measurements . 40
5.4.5 Transmitter Intermodulation . 40
5.4.5.1 Objective and Measurement Arrangement . 40
5.4.5.2 Test Conditions . 40
5.4.5.3 Test Method . 40
5.4.5.3.1 Conducted Measurements. 40
5.4.5.3.2 Radiated measurements . 41
5.4.6 Primary TVWSD update . 41
5.4.6.1 Introduction and Test conditions . 41
5.4.6.2 Test method . 42
5.4.6.2.1 Conducted Measurements. 42
5.4.6.2.2 Radiated Measurements . 42
5.4.7 Lost connection between the primary TVWSD and the TVWSDB . 42
5.4.7.1 Test conditions . 42
5.4.7.2 Test method . 43
5.4.7.2.1 Conducted Measurements. 43
5.4.7.2.2 Radiated Measurements . 43
5.4.8 Secondary TVWSD update - specific parameters invalidated . 44
5.4.8.1 Test conditions . 44
5.4.8.2 Test method . 44
5.4.8.2.1 Conducted Measurements. 44
5.4.9 Secondary TVWSD update - loss of communication with primary TVWSD . 45
5.4.9.1 Test conditions . 45
5.4.9.2 Test method . 45
5.4.9.2.1 Conducted Measurements. 45
5.4.9.2.2 Radiated Measurements . 45
5.4.10 Receiver Sensitivity level . 45
5.4.10.1 Test conditions . 45
5.4.10.2 Test method . 45
5.4.10.2.1 Conducted Measurements. 45
5.4.10.2.2 Radiated measurements . 46
5.4.11 Adjacent Channel Selectivity . 46
5.4.11.1 Test conditions . 46
5.4.11.2 Test Method . 46
5.4.11.2.1 Conducted measurements . 46
5.4.11.2.2 Radiated measurements . 47
5.4.12 Receiver Blocking . 47
5.4.12.
...
SLOVENSKI STANDARD
oSIST prEN 301 598 V2.2.0:2022
01-februar-2022
TV naprave za kanalske presledke (TVWSD) - Brezžični dostopovni sistemi, ki
delujejo v TV sprejemnem kanalu od 470 MHz do 694 MHz - Harmonizirani standard
za dostop do radijskega spektra
TV White Space Devices (TVWSD) - Wireless Access Systems operating in the 470 MHz
to 694 MHz TV broadcast band - Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 301 598 V2.2.0 (2021-12)
ICS:
33.040.99 Druga oprema za Other equipment for
telekomunikacijske sisteme telecommunication systems
oSIST prEN 301 598 V2.2.0:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 301 598 V2.2.0:2022
---------------------- Page: 2 ----------------------
oSIST prEN 301 598 V2.2.0:2022
Draft ETSI EN 301 598 V2.2.0 (2021-12)
HARMONISED EUROPEAN STANDARD
TV White Space Devices (TVWSD);
Wireless Access Systems operating in the
470 MHz to 694 MHz TV broadcast band;
Harmonised Standard for access to radio spectrum
---------------------- Page: 3 ----------------------
oSIST prEN 301 598 V2.2.0:2022
2 Draft ETSI EN 301 598 V2.2.0 (2021-12)
Reference
REN/BRAN-230019
Keywords
access, broadband, CRS, FWA, LAN, M2M,
mobile, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 301 598 V2.2.0:2022
3 Draft ETSI EN 301 598 V2.2.0 (2021-12)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 9
Introduction . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definition of terms, symbols and abbreviations . 11
3.1 Terms . 11
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental profile . 15
4.2 Conformance requirements . 15
4.2.1 Void . 15
4.2.2 Equipment types . 15
4.2.2.1 Definition . 15
4.2.2.2 Equipment Type A . 15
4.2.2.3 Equipment Type B . 15
4.2.3 Nominal Channel Bandwidth and Total Nominal Channel Bandwidth . 15
4.2.3.1 Definitions . 15
4.2.3.2 Requirements . 15
4.2.4 RF power and RF power spectral density . 16
4.2.4.1 Definitions . 16
4.2.4.1.1 RF power . 16
4.2.4.1.2 RF power spectral density . 16
4.2.4.2 Limits . 16
4.2.4.3 Conformance . 16
4.2.5 Transmitter unwanted emissions . 16
4.2.5.1 Transmitter unwanted emissions outside the 470 MHz to 694 MHz band . 16
4.2.5.1.1 Definition. 16
4.2.5.1.2 Limits . 17
4.2.5.1.3 Conformance . 17
4.2.5.2 Transmitter unwanted emissions within the 470 MHz to 694 MHz band . 17
4.2.5.2.1 Definition. 17
4.2.5.2.2 Limits . 17
4.2.5.2.3 Conformance . 18
4.2.6 Transmitter Reverse Intermodulation Attenuation . 18
4.2.6.1 Definition . 18
4.2.6.2 Limits . 18
4.2.6.3 Conformance . 18
4.2.7 Control and monitoring . 18
4.2.7.1 Control and monitoring mechanisms . 18
4.2.7.2 TVWSDB identification . 19
4.2.7.2.1 Applicability . 19
4.2.7.2.2 Definition. 19
4.2.7.2.3 Requirements . 19
4.2.7.2.4 Conformance . 19
4.2.7.3 Data exchange and compliance with parameters . 19
4.2.7.3.1 Applicability . 19
4.2.7.3.2 Device parameters, operational parameters and channel usage . 19
4.2.7.3.3 Transmission in compliance with parameters . 22
4.2.7.3.4 Reporting of device parameters . 23
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 301 598 V2.2.0:2022
4 Draft ETSI EN 301 598 V2.2.0 (2021-12)
4.2.7.3.5 Reporting of channel usage parameters . 23
4.2.7.3.6 Functionality of a primary TVWSD to support secondary TVWSDs . 23
4.2.7.3.7 Conformance . 24
4.2.7.4 Primary TVWSD update . 25
4.2.7.4.1 Definition. 25
4.2.7.4.2 Requirements . 25
4.2.7.4.3 Conformance . 25
4.2.7.5 Secondary TVWSD update . 25
4.2.7.5.1 Applicability . 25
4.2.7.5.2 Definition. 25
4.2.7.5.3 Requirements . 25
4.2.7.5.4 Conformance . 26
4.2.8 Receiver Sensitivity Level . 26
4.2.8.1 Applicability. 26
4.2.8.2 Definition . 26
4.2.8.3 Performance Criteria . 26
4.2.8.4 Limits . 26
4.2.8.5 Conformance . 26
4.2.9 Adjacent Channel Selectivity . 26
4.2.9.1 Applicability. 26
4.2.9.2 Definition . 26
4.2.9.3 Performance Criteria . 26
4.2.9.4 Limits . 26
4.2.9.5 Conformance . 27
4.2.10 Receiver Blocking . 27
4.2.10.1 Applicability. 27
4.2.10.2 Definition . 27
4.2.10.3 Performance Criteria . 27
4.2.10.4 Limits . 27
4.2.10.5 Conformance . 28
4.2.11 Receiver spurious emissions . 28
4.2.11.1 Definition . 28
4.2.11.2 Limits . 28
4.2.11.3 Conformance . 28
4.2.12 Geo-Location capability . 28
4.2.12.1 Definition . 28
4.2.12.2 Requirements . 28
4.2.12.3 Conformance . 29
4.2.13 User Access Restrictions . 29
4.2.13.1 Definition / General. 29
4.2.13.2 Parameters subject to User Access Restrictions . 29
4.2.13.3 Conformance . 29
5 Testing for compliance with technical requirements . 29
5.1 Introduction . 29
5.2 Conditions for testing . 30
5.2.1 Normal and extreme test conditions. 30
5.2.2 Antennas . 30
5.2.3 Conducted measurements, radiated measurements, and relative measurements . 30
5.2.4 Transmit operating modes . 30
5.2.5 Requirements for the test modulation . 31
5.2.6 Communication between test TVWSDB, primary and secondary UUT . 31
5.2.7 Operational Parameter set . 31
5.3 Void . 32
5.4 Essential test suites . 32
5.4.1 Product Information . 32
5.4.2 RF output power . 33
5.4.2.1 Test conditions . 33
5.4.2.2 Test method . 33
5.4.2.2.1 Conducted measurements . 33
5.4.2.2.2 Radiated measurements . 34
5.4.3 Power Spectral Density and Transmitter unwanted emissions within the 470 MHz to 694 MHz band . 35
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 301 598 V2.2.0:2022
5 Draft ETSI EN 301 598 V2.2.0 (2021-12)
5.4.3.1 Test conditions . 35
5.4.3.2 Test method . 35
5.4.3.2.1 Conducted measurement. 35
5.4.3.2.2 Radiated measurement . 37
5.4.4 Transmitter unwanted emissions outside the 470 MHz to 694 MHz band . 37
5.4.4.1 Purpose . 37
5.4.4.2 Test conditions . 38
5.4.4.3 Test method . 38
5.4.4.3.1 Conducted measurements . 38
5.4.4.3.2 Radiated measurements . 40
5.4.5 Transmitter Intermodulation . 40
5.4.5.1 Objective and Measurement Arrangement . 40
5.4.5.2 Test Conditions . 40
5.4.5.3 Test Method . 40
5.4.5.3.1 Conducted Measurements. 40
5.4.5.3.2 Radiated measurements . 41
5.4.6 Primary TVWSD update . 41
5.4.6.1 Introduction and Test conditions . 41
5.4.6.2 Test method . 42
5.4.6.2.1 Conducted Measurements. 42
5.4.6.2.2 Radiated Measurements . 42
5.4.7 Lost connection between the primary TVWSD and the TVWSDB . 43
5.4.7.1 Test conditions . 43
5.4.7.2 Test method . 43
5.4.7.2.1 Conducted Measurements. 43
5.4.7.2.2 Radiated Measurements . 44
5.4.8 Secondary TVWSD update - specific parameters invalidated . 44
5.4.8.1 Test conditions . 44
5.4.8.2 Test method . 44
5.4.8.2.1 Conducted Measurements. 44
5.4.9 Secondary TVWSD update - loss of communication with primary TVWSD . 45
5.4.9.1 Test conditions . 45
5.4.9.2 Test method . 45
5.4.9.2.1 Conducted Measurements. 45
5.4.9.2.2 Radiated Measurements . 45
5.4.10 Receiver Sensitivity level . 45
5.4.10.1 Test conditions . 45
5.4.10.2 Test method . 45
5.4.10.2.1 Conducted Measurements. 45
5.4.10.2.2 Radiated measurements . 46
5.4.11 Adjacent Channel Selectivity . 46
5.4.11.1 Test conditions . 46
5.4.11.2 Test Method . 46
5.4.11.2.1 Conducted measurements . 46
5.4.11.2.2 Radiated measurements . 47
5.4.12 Receiver Blocking . 47
5.4.12.1 Test conditions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.