ETSI EN 301 174-2 V1.1.3 (1999-03)
Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Signalling specification for frame relay service; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Signalling specification for frame relay service; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
DEN/SPS-05142-2
Širokopasovno digitalno omrežje z integriranimi storitvami (B-ISDN) – Protokol digitalne naročniške signalizacije št. 2 (DSS2) – Specifikacija signalizacije za storitev blokovnega posredovanja – 2. del: Izjava o skladnosti izvedbe protokola (PICS) – Proforma specifikacija
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Signalling specification for frame relay service; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 301 174-2 Version 1.1.3SIST EN 301 174-2 V1.1.3:2005en01-januar-2005SIST EN 301 174-2 V1.1.3:2005SLOVENSKI
STANDARD
SIST EN 301 174-2 V1.1.3:2005
EN 301 174-2 V1.1.3 (1999-03)European Standard (Telecommunications series)Broadband Integrated Services Digital Network (B-ISDN);Digital Subscriber Signalling System No. two (DSS2) protocol;Signalling specification for frame relay service;Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specificationSIST EN 301 174-2 V1.1.3:2005
ETSIEN 301 174-2 V1.1.3 (1999-03)2ReferenceDEN/SPS-05142-2 (avci0ie0.PDF)KeywordsPICS, B-ISDN, DSS2, frame relayETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frIndividual copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgIf you find errors in the present document, send yourcomment to: editor@etsi.frCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1999.All rights reserved.SIST EN 301 174-2 V1.1.3:2005
ETSIEN 301 174-2 V1.1.3 (1999-03)3ContentsIntellectual Property Rights.5Foreword.5Introduction.51Scope.62References.63Definitions and abbreviations.73.1Definitions.73.2Abbreviations.74Conformance to this PICS proforma specification.7Annex A (normative):PICS proforma for EN 301 174-1.8A.1Guidance for completing the PICS proforma.8A.1.1Purposes and structure.8A.1.2Abbreviations and conventions.9A.1.3Instructions for completing the PICS proforma.11A.2Identification of the implementation.11A.2.1Date of the statement.11A.2.2Implementation under test identification.11A.2.3System under test identification.11A.2.4Product supplier.12A.2.5Client (if different from product supplier).12A.2.6PICS contact person.13A.3Identification of the protocol.13A.4Global statement of conformance.13A.5Roles.13A.6User role.14A.6.1Major capabilities.14A.6.2Subsidiary capabilities.14A.6.3PDUs.14A.6.4PDU parameters received by the user.14A.6.5PDU parameters sent by the user.15A.6.6Structure of protocol data unit parameters received by the user.16A.6.7Structure of protocol data unit parameters sent by the user.16A.6.8Timers.17A.6.9Call states.17A.7Network role.17A.7.1Major capabilities.17A.7.2Subsidiary capabilities.17A.7.3PDUs.18A.7.4PDU parameters received by the network.18A.7.5PDU parameters sent by the network.18A.7.6Structure of Protocol Data Unit Parameters received by the network.19A.7.7Structure of Protocol Data Unit Parameters sent by the network.19A.7.8Timers.20A.7.9Call states.20SIST EN 301 174-2 V1.1.3:2005
ETSIEN 301 174-2 V1.1.3 (1999-03)4Annex B (normative):Requirements list.21B.1User.21B.1.1Requirements on items used in the basic call PICS.21B.2Network.22B.2.1Requirements on items used in the basic call PICS.22History.23SIST EN 301 174-2 V1.1.3:2005
ETSIEN 301 174-2 V1.1.3 (1999-03)5Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee SignallingProtocols and Switching (SPS).The present document is part 2 of a multi-part standard covering the Digital Subscriber Signalling System No. two(DSS2) protocol specification for the Broadband Integrated Services Digital Network Frame Relaying bearer service asdescribed below:Part 1:"Protocol specification";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP) specification for the user";Part 4:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the user";Part 5:"Test Suite Structure and Test Purposes (TSS&TP) specification for the network";Part 6:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the network".NOTE:The final structure of the parts containing the test specifications is currently under study.National transposition datesDate of adoption of this EN:12 March 1999Date of latest announcement of this EN (doa):30 June 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 December 1999Date of withdrawal of any conflicting National Standard (dow):31 December 1999IntroductionTo evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities andoptions have been implemented for a telecommunication specification. Such a statement is called an ICS.SIST EN 301 174-2 V1.1.3:2005
ETSIEN 301 174-2 V1.1.3 (1999-03)61ScopeThe present document provides the Protocol Implementation Conformance Statement (PICS) proforma for theBroadband Integrated Services Digital Network (B-ISDN) Digital Subscriber Signalling System No. two (DSS2)protocol for the Frame Relaying bearer service as specified in EN 301 174-1 [3] in compliance with the relevantrequirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [6] and ETS 300 406 [4].The supplier of a protocol implementation which is claimed to conform to EN 301 174-1 [3] is required to complete acopy of the PICS proforma provided in annex A of the present document and is required to provide the informationnecessary to identify the supplier and the implementation.Further ENs (or further parts of the present document) provide the method of testing and detailed application specificrequirements to determine conformance to the present document.The provision of this service requires the support of the protocol for the basic point-to-point call/bearer connections asdefined in the EN 300 443-1 [1].2ReferencesThe following documents contain provisions which, through reference in this text, constitute provisions of the presentdocument.· References are either specific (identified by date of publication, edition number, version number, etc.) ornon-specific.· For a specific reference, subsequent revisions do not apply.· For a non-specific reference, subsequent revisions do apply.· A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]EN 300 443-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specificationfor basic call/bearer control; Part 1: Protocol specification [ITU-T Recommendation Q.2931(1995), modified]".[2]ETS 300 443-2: "Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specificationfor basic call/bearer control; Part 2: Protocol Implementation Conformance Statement (PICS)proforma specification".[3]EN 301 174-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital SubscriberSignalling System No. two (DSS2) protocol; Signalling specification for frame relay service;Part 1: Protocol specification [ITU-T Recommendation Q.2933 (1996), modified]".[4]ETS 300 406 (1995): "Methods for Testing and Specification (MTS); Protocol and profileconformance testing specifications; Standardization methodology".[5]ISO/IEC 9646-1 (1994): "Information technology - Open Systems Interconnection - Conformancetesting methodology and framework - Part 1: General concepts".[6]ISO/IEC 9646-7 (1995): "Information technology - Open Systems Interconnection - Conformancetesting methodology and framework - Part 7: Implementation Conformance Statements".SIST EN 301 174-2 V1.1.3:2005
ETSIEN 301 174-2 V1.1.3 (1999-03)73Definitions and abbreviations3.1DefinitionsFor the purposes of the present document the following terms and definitions apply:-terms defined in EN 301 174-1 [3];-terms defined in ISO/IEC 9646-1 [5] and in ISO/IEC 9646-7 [6].In particular, the following terms defined in ISO/IEC 9646-1 [5] apply:Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or systemclaimed to conform to a given specification, stating which capabilities have been implemented. The ICS can take severalforms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc.ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or systembecomes an ICS.Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification.3.2AbbreviationsFor the purposes of the present document the following abbreviations apply:ICSImplementation Conformance StatementIUTImplementation Under TestOSIOpen Systems InterconnectionSCSSystem Conformance StatementSUTSystem Under TestPICSProtocol Implementation Conformance Statement4Conformance to this PICS proforma specificationIf it claims to conform to the present document the actual PICS proforma to be filled in by a supplier shall be technicallyequivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/naming and ordering ofthe proforma items.An PICS which conforms to the present document shall be a conforming PICS proforma completed in accordance withthe guidance for completion given in clause A.1.SIST EN 301 174-2 V1.1.3:2005
ETSIEN 301 174-2 V1.1.3 (1999-03)8Annex A (normative):PICS proforma for EN 301 174-1Notwithstanding the provisions of the copyright clause related to the text of the present document ETSI grants that usersof the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intendedpurposes and may further publish the completed PICS.A.1Guidance for completing the PICS proformaA.1.1Purposes and structureThe purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of therequirements defined in EN 301 174-1 [3] may provide information about the implementation in a standardized manner.The PICS proforma is subdivided into subclauses for the following categories of information:-instructions for completing the PICS proforma;-identification of the implementation;-identification of the protocol;-global statement of conformance;-roles;-user role:-major capabilities;-PDUs;-PDU parameters;-timers;-call states;-network role:-major capabilities;-PDUs;-PDU parameters;-timers;-call states.SIST EN 301 174-2 V1.1.3:2005
ETSIEN 301 174-2 V1.1.3 (1999-03)9A.1.2Abbreviations and conventionsThe PICS proforma contained in this annex is comprised of information in tabular form in accordance with theguidelines presented in ISO/IEC 9646-7 [6].Item columnThe item column contains a number which identifies the item in the table.Item description columnThe item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitlymeans "is supported by the implementation?".Status columnThe following notations, defined in ISO/IEC 9646-7 [6], are used for the status column:m:mandatory - the capability is required to be supported.o:optional - the capability may be supported or not.n/a:not applicable - in the given context, it is impossible to use the capability.x:prohibited (excluded) - there is a requirement not to use this capability in the given context.o.i:qualified optional - for mutually exclusive or selectable options from a set. "i" is an integer whichidentifies an unique group of related optional items and the logic of their selection which is definedimmediately following the table.NOTE 1:In the case where items of the group do not always belong to the same table, all o.i shall be defined in thelast subclause of the PICS proforma, and the text "which is defined immediately following the table"should be replaced by "which is defined in the last subclause of this annex".ci:Conditional - the requirement on the capability ("m", "o", "x" or "n/a") depends on the support ofother optional or conditional items. "i" is an integer identifying an unique conditional statusexpression which is defined immediately following the table.c: o:conditional optional - the capability may be supported or not if the hierarchically precedingcapability is supported.c: m:conditional mandatory - the capability is required to be supported if the hierarchically precedingcapability is supported.Reference columnThe reference column makes reference to EN 301 174-1 [3], except where explicitly stated otherwise.Support columnThe support column shall be filled in by the supplier of the implementation. The following common notations, defined inISO/IEC 9646-7 [6], are used for the support column:Y or y:supported by the implementation.N or n:not supported by the implementation.N/A, n/a or -:no answer required (allowed only if the status is n/a, directly or after evaluation of a conditionalstatus).SIST EN 301 174-2 V1.1.3:2005
ETSIEN 301 174-2 V1.1.3 (1999-03)10If this PICS proforma is completed in order to describe a multiple-profile support in a system, it is necessary to be ableto answer that a capability is supported for one profile and not supported for another. In that case, the supplier shallenter the unique reference to a conditional expression, preceded by "?" (e.g. ?3). This expression shall be given in thespace for comments provided at the bottom of the table. It uses predicates defined in the SCS, each of which refers to asingle profile and which takes the value TRUE if and only if that profile is to be used.EXAMPLE 1:?3:IF prof1 THEN Y ELSE N.It is also possible to provide a comment to an answer in the space provided at the bottom of the table.NOTE 2:As stated in ISO/IEC 9646-7 [6], support for a received PDU requires the ability to parse all validparameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter isnon-conformant. Support for a parameter on a PDU means that the semantics of that parameter aresupported.Values allowed columnThe values allowed column contains the type, the list, the range, or the length of values allowed. The following notationsare used:-range of values: . example: 5 . 20-list of values:, , ., example: 2, 4, 6, 8, 9example:'1101'B, '1011'B, '1111'Bexample:'0A'H, '34'H, '2F'H-list of named values:(), (), ., (example: reject(1), accept(2)-length:size ( . )example:size (1 . 8)Values supported columnThe values supported column shall be filled in by the supplier of the implementation. In this column, the values or theranges of values supported by the implementation shall be indicated.References to itemsFor each possible item answer (answer in the support column) within the PICS proforma a unique reference exists, used,for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character "/",followed by the item number in the table. If there is more than one support column in a table, the columns arediscriminated by letters (a, b, etc.), respectively.EXAMPLE 2:A.5/4 is the reference to the answer of item 4 in table 5 of annex A.EXAMPLE 3:A.6/3b is the reference to the second answer (i.e. in the second support column) of item 3 in table 6of annex A.Prerequisite lineA prerequisite line takes the form: Prerequisite: .A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to becompleted if the predicate is FALSE.SIST EN 301 174-2 V1.1.3:2005
ETSIEN 301 174-2 V1.1.3 (1999-03)11A.1.3Instructions for completing the PICS proformaThe supplier of the implementation shall complete the PICS proforma in each of the spaces provided. In particular, anexplicit answer shall be entered, in each of the support column boxes provided, using the notation described in subclauseA.1.2.If necessary, the supplier may provide additional comments in space at the bottom of the tables, or separately on sheetsof paper.More detailed instructions are given at the beginning of the different subclauses of the PICS proforma.A.2Identification of the implementationIdentification of the IUT and the system in which it resides (the SUT) should be filled in so as to provide as much detailas possible regarding version numbers and configuration options.The product supplier information and client information should both be filled in if they are different.A person who can answer queries regarding information supplied in the PICS should be named as the contact person.A.2.1Date of the statement.A.2.2Implementation under test identificationIUT name:.IUT version:.A.2.3System under test identificationSUT name:.Hardware configuration:.Operating system:.SIST EN 301 174-2 V1.1.3:2005
ETSIEN 301 174-2 V1.1.3 (1999-03)12A.2.4Product supplierName:.Address:.Telephone number:.Facsimile number:.E-mail address:.Additional information:.A.2.5Client (if different from product supplier)Name:.Address:.Telephone number:.Facsimile number:.E-mail address:.Additional information:.SIST EN 3
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.