ETSI EN 300 175-1 V2.9.1 (2022-03)
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview
REN/DECT-00351
Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Skupni vmesnik (CI) - 1. del: Pregled
V tem dokumentu sta predstavitev in pregled celotnega skupnega vmesnika (CI) za digitalne izboljšane brezvrvične telekomunikacije (DECT). V tem dokumentu je povzetek drugih delov standarda o digitalnih izboljšanih brezvrvičnih telekomunikacijah in splošen opis: • ciljev tega dokumenta; • skupnega vmesnika za digitalne izboljšane brezvrvične telekomunikacije; • arhitekture protokola digitalnih izboljšanih brezvrvičnih telekomunikacij. V tem dokumentu je tudi obsežen slovar, ki vključuje zlasti skupne definicije vseh tehničnih izrazov, uporabljenih v različnih delih tega dokumenta. Ta dokument vključuje novo generacijo digitalnih izboljšanih brezvrvičnih telekomunikacij, nadaljnji razvoj standarda o digitalnih izboljšanih brezvrvičnih telekomunikacijah, ki uvaja širokopasovni govor, izpopolnjene podatkovne storitve, nove tipe rež in druge tehnične izpopolnitve. Dokument vključuje razvoj digitalnih izboljšanih brezvrvičnih telekomunikacij.
General Information
Buy Standard
Standards Content (Sample)
ETSI EN 300 175-1 V2.9.1 (2022-03)
EUROPEAN STANDARD
Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI);
Part 1: Overview
---------------------- Page: 1 ----------------------
2 ETSI EN 300 175-1 V2.9.1 (2022-03)
Reference
REN/DECT-00351
Keywords
7 kHz, audio, broadband, codec, DECT, handsfree,
IMT-2000, loudspeaking, mobility, narrowband,
quality, radio, speech, TDD, TDMA, telephony,
terminal
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 300 175-1 V2.9.1 (2022-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 19
3.3 Abbreviations . 20
4 Structure . 26
4.0 General . 26
4.1 Part 1: Overview . 26
4.2 Part 2: Physical Layer (PHL) . 26
4.3 Part 3: Medium Access Control (MAC) layer . 26
4.4 Part 4: Data Link Control (DLC) layer . 26
4.5 Part 5: Network (NWK) layer . 26
4.6 Part 6: Identities and addressing . 27
4.7 Part 7: Security features . 27
4.8 Part 8: Speech and audio coding and transmission . 27
5 The objectives of the CI standard . 27
6 General description of the system . 28
7 Description of the protocol architecture . 30
7.1 General . 30
7.2 The DECT layered structure . 30
7.3 Physical Layer (PHL) . 31
7.4 MAC layer . 31
7.5 DLC layer . 31
7.6 Network (NWK) layer . 31
7.7 Lower Layer Management Entity (LLME) . 32
7.8 Interworking Units (IWU) . 32
8 Proprietary escapes within the CI . 32
8.0 General . 32
8.1 Primary escape routes . 33
8.2 Secondary escape routes . 33
9 Levels of conformance . 34
10 Further development of the DECT standard . 34
10.1 IMT-2000 . 34
10.2 The DECT Packet Radio Service (DPRS) . 34
10.3 DECT in international markets . 34
10.3.0 General . 34
10.3.1 United States of America . 35
10.3.2 Japan . 35
10.4 The New Generation DECT (NG-DECT) . 35
10.5 DECT Ultra Low Energy (ULE) . 36
10.6 DECT Evolution . 37
10.7 DECT-2020 NR . 38
Annex A (informative): Bibliography . 39
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 300 175-1 V2.9.1 (2022-03)
Annex B (informative): Change history . 40
History . 41
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 300 175-1 V2.9.1 (2022-03)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Digital Enhanced Cordless
Telecommunications (DECT).
The present document is part 1 of a multi-part deliverable covering the Common Interface (CI) for the Digital Enhanced
Cordless Telecommunications (DECT), as identified below:
Part 1: "Overview";
Part 2: "Physical Layer (PHL)";
Part 3: "Medium Access Control (MAC) layer";
Part 4: "Data Link Control (DLC) layer";
Part 5: "Network (NWK) layer";
Part 6: "Identities and addressing";
Part 7: "Security features";
Part 8: "Speech and audio coding and transmission".
The following aspects of the present document are subject to controlled distribution:
a) DECT identities, as defined in ETSI EN 300 175-6 [6];
b) some DECT cryptographic algorithms.
The cryptographic algorithms subjected to controlled distribution specify the details of the DECT Standard
Authentication Algorithm (DSAA) and the DECT Standard Cipher (DSC). The cryptographic algorithms DECT
Standard Authentication Algorithm #2 (DSAA2) and DECT Standard Cipher #2 (DSC2) are not subjected to controlled
distribution.
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 300 175-1 V2.9.1 (2022-03)
These aspects are distributed on an individual basis. Further information and details of the current distribution
procedures can be obtained from the ETSI Secretariat at the address on the second page of the present document.
Further details of the DECT system may be found in ETSI TR 101 178 [i.4], ETSI ETR 043 [i.5] and ETSI
TR 102 185 [i.6].
National transposition dates
Date of adoption of this EN: 23 March 2022
Date of latest announcement of this EN (doa): 30 June 2022
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 December 2022
Date of withdrawal of any conflicting National Standard (dow): 31 December 2023
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 300 175-1 V2.9.1 (2022-03)
1 Scope
The present document gives an introduction and overview of the complete Digital Enhanced Cordless
Telecommunications (DECT) Common Interface (CI).
The present document contains an abstract of the other parts of the DECT standard together with a general
description of:
• the objectives of the present document;
• the DECT Common Interface;
• the protocol architecture of DECT.
The present document also provides an extensive vocabulary; in particular it contains the common definitions of all the
technical terms used in different parts of the present document.
The present document includes New Generation DECT, a further development of the DECT standard introducing
wideband speech, improved data services, new slot types and other technical enhancements.
The present document includes DECT Evolution.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] Void.
[2] ETSI EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 2: Physical Layer (PHL)".
[3] ETSI EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 3: Medium Access Control (MAC) layer".
[4] ETSI EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 4: Data Link Control (DLC) layer".
[5] ETSI EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 5: Network (NWK) layer".
[6] ETSI EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 6: Identities and addressing".
[7] ETSI EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 7: Security features".
[8] ETSI EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 8: Speech and audio coding and transmission".
ETSI
---------------------- Page: 7 ----------------------
8 ETSI EN 300 175-1 V2.9.1 (2022-03)
[9] ETSI EN 300 176 (all parts): "Digital Enhanced Cordless Telecommunications (DECT); Test
specification".
[10] Recommendation ITU-R M.1457-15: "Detailed specifications of the terrestrial radio interfaces of
International Mobile Telecommunications-2000 (IMT-2000)".
[11] ETSI EN 301 649: "Digital Enhanced Cordless Telecommunications (DECT); DECT Packet
Radio Service (DPRS)".
[12] ETSI TS 102 497: "Digital Enhanced Cordless Telecommunications (DECT); DECT in the
1 920 MHz to 1 930 MHz Unlicensed Personal Communications Services (UPCS) frequency
band; Specific requirements".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[i.2] Recommendation ITU-R SM.1046-2: "Definition of spectrum use and efficiency of a radio
system".
[i.3] Recommendation ITU-R M.816-1: "Framework for services supported on International Mobile
Telecommunications-2000 (IMT-2000)".
[i.4] ETSI TR 101 178: "Digital Enhanced Cordless Telecommunications (DECT); A High Level Guide
to the DECT Standardization".
[i.5] ETSI ETR 043: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface
(CI); Services and facilities requirements specification".
[i.6] ETSI TR 102 185: "Digital Enhanced Cordless Telecommunications (DECT); Data Services
Profile (DSP); Profile overview".
[i.7] ETSI ETR 310: "Digital Enhanced Cordless Telecommunications (DECT); Traffic capacity and
spectrum requirements for multi-system and multi-service DECT applications co-existing in a
common frequency band".
[i.8] ETSI TS 102 265: "Digital Enhanced Cordless Telecommunications (DECT); DECT access to IP
networks".
[i.9] Recommendation ITU-T P.311: "Transmission characteristics for wideband (150-7000 Hz) digital
handset telephones".
[i.10] ETSI TR 102 570: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Overview and Requirements".
[i.11] ETSI TS 102 527-1: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 1: Wideband Speech".
[i.12] ETSI TS 102 527-2: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 2: Support of transparent IP packet data".
[i.13] ETSI TS 102 527-3: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 3: Extended wideband speech services".
ETSI
---------------------- Page: 8 ----------------------
9 ETSI EN 300 175-1 V2.9.1 (2022-03)
[i.14] ETSI TS 102 527-4: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 4: Light Data Services; Software Update Over The Air (SUOTA), content
downloading and HTTP based applications".
[i.15] ETSI TS 102 527-5: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 5: Additional feature set nr. 1 for extended wideband speech services".
[i.16] Recommendation ITU-T V.42: "Error-correcting procedures for DCEs using asynchronous-to-
synchronous conversion".
[i.17] Recommendation ITU-T V.24: "List of definitions for interchange circuits between Data Terminal
Equipment (DTE) and data circuit-terminating equipment (DCE)".
[i.18] ETSI TS 102 939-1: "Digital Enhanced Cordless Telecommunications (DECT); Ultra Low Energy
(ULE); Machine to Machine Communications; Part 1: Home Automation Network (phase 1)".
[i.19] ETSI TS 102 939-2: "Digital Enhanced Cordless Telecommunications (DECT); Ultra Low Energy
(ULE); Machine to Machine Communications; Part 2: Home Automation Network (phase 2)".
[i.20] IEEE 802.11-2012™: "IEEE Standard for Information technology--Telecommunications and
information exchange between systems Local and metropolitan area networks--Specific
requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY)
Specifications".
[i.21] Recommendation ITU-T G.722 (2012): "7 kHz audio-coding within 64 kbit/s".
[i.22] Recommendation ITU-T G.729.1 (2006): "G.729-based Embedded Variable bit-rate coder: An
8-32 kbit/s scalable wideband coder bitstream interoperable with G.729".
[i.23] ISO/IEC 14496-3:2009: "Information technology -- Coding of audio-visual objects -- Part 3:
Audio" (ISO/IEC JTC1/SC29/WG11 (MPEG)).
[i.24] IETF RFC 3261: "SIP: Session Initiation Protocol".
[i.25] Recommendation ITU-T H.323: "Packet-based multimedia communications systems".
[i.26] ETSI TS 103 634: "Digital Enhanced Cordless Telecommunications (DECT); Low Complexity
Communication Codec plus (LC3plus)".
[i.27] ETSI TS 103 636-1: "DECT-2020 New Radio (NR); Part 1: Overview; Release 1".
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the following terms apply:
Access Rights Class (ARC): type of access to a DECT network, such as public, residential or private
Access Rights Details (ARD): unique number within one ARC
Access Rights Identity (ARI): globally unique identity that shows the access rights related to a service provider
NOTE: PARI = Primary ARI;
SARI = Secondary ARI;
TARI = Tertiary ARI.
algorithm: mathematical process or function that transforms an input into an output
algorithm identifier: designator to show which algorithm is in use, so that the correct one may be chosen
ETSI
---------------------- Page: 9 ----------------------
10 ETSI EN 300 175-1 V2.9.1 (2022-03)
antenna diversity: diversity implies that the Radio Fixed Part (RFP) for each bearer independently can select different
antenna properties such as gain, polarization, coverage patterns and other features that may affect the practical coverage
NOTE: A typical example is space diversity, provided by two vertically polarized antennas separated by 10 cm to
20 cm.
asymmetric algorithm: See public key algorithm.
attach: process whereby a Portable Part (PP) within the coverage area of a Fixed Part (FP) to which it has access rights,
notifies the FP that it is operative
authentication: corroboration that an entity is the one that is claimed
authentication of Fixed radio Termination (FT): process whereby the identity of an FT is verified to a DECT PT
authentication of Portable radio Termination (PT): process whereby a DECT PT is positively verified to be a
legitimate user of a particular FP
authentication (of a subscriber): process whereby a DECT subscriber is positively verified to be a legitimate user of a
particular FP
authentication of user: process whereby a DECT user is positively verified to be a legitimate user of a particular FP
bearer: See Medium Access Control (MAC) bearer or bearer service.
bearer handover: internal handover process provided by the MAC layer, whereby one MAC connection can modify its
underlying bearers while maintaining the service provided to the Data Link Control (DLC) layer
bearer service: type of telecommunication service that provides a defined capability for the transmission of signals
between user-network interfaces
broadcast: simplex point-to-multipoint mode of transmission
C-plane: control plane of the DECT protocol stacks, which contains all of the internal DECT protocol control, but may
also include some external user information
call: all of the Network (NWK) layer processes involved in one NWK layer peer-to-peer association
cell: domain served by a single antenna(e) system (including a leaky feeder) of one FP
Central Control Fixed Part (CCFP): physical grouping that contains the central elements of a FP
centrex: implementation of a private telecommunication network exchange that is not located on the premises of the
private network operator
Cipher Block Chaining Message Authentication Code (CBC-MAC): cryptographic technique for constructing a
message authentication code from a block cipher
Cipher Key (CK): value that is used to determine the transformation of plaintext to ciphertext in a cryptographic
algorithm
Cipher Key (CK) generation: process for generating cryptographic keys
ciphertext: output of a cryptographic algorithm
channel: See physical channel.
cluster: logical grouping of one or more cells between which bearer handover is possible
confidentiality: rendering information secret as ciphertext unless the capability is possessed to recover the plaintext
from ciphertext
connection: See MAC connection.
connection handover: internal handover process provided by the DLC layer, whereby one set of DLC entities (C-plane
and U-plane) can re-route data from one MAC connection to a second new MAC connection, while maintaining the
service provided to the NWK layer
ETSI
---------------------- Page: 10 ----------------------
11 ETSI EN 300 175-1 V2.9.1 (2022-03)
Connection Less mode (C/L): transmission mode that transfers one packet (one self-contained unit) of data from one
source point to one (or more) destination points in a single phase
Connection Oriented mode (C/O): transmission mode that transfers data from one source point to one or more
destination points using a protocol based on three phases:
• "Set-up";
• "Data transfer"; and
• "Release".
Cordless Radio Fixed Part (CRFP): Wireless Relay Station (WRS) that provides independent bearer control to a PT
and FT for relayed connections
Counter with CBC-MAC (CCM): authenticated encryption algorithm designed to provide both authentication and
confidentiality
countermeasure: device, instrument or procedure used to counteract or defend against a threat
coverage area: area over which reliable communication can be established and maintained
cryptography: secret writing
Data Encryption Standard (DES): United States Federal data encryption standard
Data Link Control (DLC): layer 2b of the DECT protocol stack
decipherment: rendering of ciphertext into plaintext
DECT NetWork (DNW): network that uses the DECT air interface to interconnect a local network to one or more
portable applications
DECT Standard Authentication Algorithm (DSAA): algorithm used for authentication in DECT
DECT Standard Authentication Algorithm #2 (DSAA2): algorithm used for authentication in DECT
DECT Standard Cipher (DSC): algorithm used for data encryption in DECT
DECT Standard Cipher #2 (DSC2): algorithm used for data encryption in DECT
Default Cipher Key (DefCK): Derived Cipher Key (DCK) that is stored in both FP and PP to be used later by MAC to
immediately encrypt with connection establishment
Derived Cipher Key (DCK): Cipher Key (CK) that is established as part of the procedure used to authenticate the PT
distributed
...
SLOVENSKI STANDARD
SIST EN 300 175-1 V2.9.1:2022
01-maj-2022
Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Skupni vmesnik (CI) - 1.
del: Pregled
Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI) - Part
1: Overview
Ta slovenski standard je istoveten z: ETSI EN 300 175-1 V2.9.1 (2022-03)
ICS:
33.070.30 Digitalne izboljšane Digital Enhanced Cordless
brezvrvične telekomunikacije Telecommunications (DECT)
(DECT)
SIST EN 300 175-1 V2.9.1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 300 175-1 V2.9.1:2022
---------------------- Page: 2 ----------------------
SIST EN 300 175-1 V2.9.1:2022
ETSI EN 300 175-1 V2.9.1 (2022-03)
EUROPEAN STANDARD
Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI);
Part 1: Overview
---------------------- Page: 3 ----------------------
SIST EN 300 175-1 V2.9.1:2022
2 ETSI EN 300 175-1 V2.9.1 (2022-03)
Reference
REN/DECT-00351
Keywords
7 kHz, audio, broadband, codec, DECT, handsfree,
IMT-2000, loudspeaking, mobility, narrowband,
quality, radio, speech, TDD, TDMA, telephony,
terminal
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 300 175-1 V2.9.1:2022
3 ETSI EN 300 175-1 V2.9.1 (2022-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 19
3.3 Abbreviations . 20
4 Structure . 26
4.0 General . 26
4.1 Part 1: Overview . 26
4.2 Part 2: Physical Layer (PHL) . 26
4.3 Part 3: Medium Access Control (MAC) layer . 26
4.4 Part 4: Data Link Control (DLC) layer . 26
4.5 Part 5: Network (NWK) layer . 26
4.6 Part 6: Identities and addressing . 27
4.7 Part 7: Security features . 27
4.8 Part 8: Speech and audio coding and transmission . 27
5 The objectives of the CI standard . 27
6 General description of the system . 28
7 Description of the protocol architecture . 30
7.1 General . 30
7.2 The DECT layered structure . 30
7.3 Physical Layer (PHL) . 31
7.4 MAC layer . 31
7.5 DLC layer . 31
7.6 Network (NWK) layer . 31
7.7 Lower Layer Management Entity (LLME) . 32
7.8 Interworking Units (IWU) . 32
8 Proprietary escapes within the CI . 32
8.0 General . 32
8.1 Primary escape routes . 33
8.2 Secondary escape routes . 33
9 Levels of conformance . 34
10 Further development of the DECT standard . 34
10.1 IMT-2000 . 34
10.2 The DECT Packet Radio Service (DPRS) . 34
10.3 DECT in international markets . 34
10.3.0 General . 34
10.3.1 United States of America . 35
10.3.2 Japan . 35
10.4 The New Generation DECT (NG-DECT) . 35
10.5 DECT Ultra Low Energy (ULE) . 36
10.6 DECT Evolution . 37
10.7 DECT-2020 NR . 38
Annex A (informative): Bibliography . 39
ETSI
---------------------- Page: 5 ----------------------
SIST EN 300 175-1 V2.9.1:2022
4 ETSI EN 300 175-1 V2.9.1 (2022-03)
Annex B (informative): Change history . 40
History . 41
ETSI
---------------------- Page: 6 ----------------------
SIST EN 300 175-1 V2.9.1:2022
5 ETSI EN 300 175-1 V2.9.1 (2022-03)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Digital Enhanced Cordless
Telecommunications (DECT).
The present document is part 1 of a multi-part deliverable covering the Common Interface (CI) for the Digital Enhanced
Cordless Telecommunications (DECT), as identified below:
Part 1: "Overview";
Part 2: "Physical Layer (PHL)";
Part 3: "Medium Access Control (MAC) layer";
Part 4: "Data Link Control (DLC) layer";
Part 5: "Network (NWK) layer";
Part 6: "Identities and addressing";
Part 7: "Security features";
Part 8: "Speech and audio coding and transmission".
The following aspects of the present document are subject to controlled distribution:
a) DECT identities, as defined in ETSI EN 300 175-6 [6];
b) some DECT cryptographic algorithms.
The cryptographic algorithms subjected to controlled distribution specify the details of the DECT Standard
Authentication Algorithm (DSAA) and the DECT Standard Cipher (DSC). The cryptographic algorithms DECT
Standard Authentication Algorithm #2 (DSAA2) and DECT Standard Cipher #2 (DSC2) are not subjected to controlled
distribution.
ETSI
---------------------- Page: 7 ----------------------
SIST EN 300 175-1 V2.9.1:2022
6 ETSI EN 300 175-1 V2.9.1 (2022-03)
These aspects are distributed on an individual basis. Further information and details of the current distribution
procedures can be obtained from the ETSI Secretariat at the address on the second page of the present document.
Further details of the DECT system may be found in ETSI TR 101 178 [i.4], ETSI ETR 043 [i.5] and ETSI
TR 102 185 [i.6].
National transposition dates
Date of adoption of this EN: 23 March 2022
Date of latest announcement of this EN (doa): 30 June 2022
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 December 2022
Date of withdrawal of any conflicting National Standard (dow): 31 December 2023
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 8 ----------------------
SIST EN 300 175-1 V2.9.1:2022
7 ETSI EN 300 175-1 V2.9.1 (2022-03)
1 Scope
The present document gives an introduction and overview of the complete Digital Enhanced Cordless
Telecommunications (DECT) Common Interface (CI).
The present document contains an abstract of the other parts of the DECT standard together with a general
description of:
• the objectives of the present document;
• the DECT Common Interface;
• the protocol architecture of DECT.
The present document also provides an extensive vocabulary; in particular it contains the common definitions of all the
technical terms used in different parts of the present document.
The present document includes New Generation DECT, a further development of the DECT standard introducing
wideband speech, improved data services, new slot types and other technical enhancements.
The present document includes DECT Evolution.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] Void.
[2] ETSI EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 2: Physical Layer (PHL)".
[3] ETSI EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 3: Medium Access Control (MAC) layer".
[4] ETSI EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 4: Data Link Control (DLC) layer".
[5] ETSI EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 5: Network (NWK) layer".
[6] ETSI EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 6: Identities and addressing".
[7] ETSI EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 7: Security features".
[8] ETSI EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 8: Speech and audio coding and transmission".
ETSI
---------------------- Page: 9 ----------------------
SIST EN 300 175-1 V2.9.1:2022
8 ETSI EN 300 175-1 V2.9.1 (2022-03)
[9] ETSI EN 300 176 (all parts): "Digital Enhanced Cordless Telecommunications (DECT); Test
specification".
[10] Recommendation ITU-R M.1457-15: "Detailed specifications of the terrestrial radio interfaces of
International Mobile Telecommunications-2000 (IMT-2000)".
[11] ETSI EN 301 649: "Digital Enhanced Cordless Telecommunications (DECT); DECT Packet
Radio Service (DPRS)".
[12] ETSI TS 102 497: "Digital Enhanced Cordless Telecommunications (DECT); DECT in the
1 920 MHz to 1 930 MHz Unlicensed Personal Communications Services (UPCS) frequency
band; Specific requirements".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[i.2] Recommendation ITU-R SM.1046-2: "Definition of spectrum use and efficiency of a radio
system".
[i.3] Recommendation ITU-R M.816-1: "Framework for services supported on International Mobile
Telecommunications-2000 (IMT-2000)".
[i.4] ETSI TR 101 178: "Digital Enhanced Cordless Telecommunications (DECT); A High Level Guide
to the DECT Standardization".
[i.5] ETSI ETR 043: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface
(CI); Services and facilities requirements specification".
[i.6] ETSI TR 102 185: "Digital Enhanced Cordless Telecommunications (DECT); Data Services
Profile (DSP); Profile overview".
[i.7] ETSI ETR 310: "Digital Enhanced Cordless Telecommunications (DECT); Traffic capacity and
spectrum requirements for multi-system and multi-service DECT applications co-existing in a
common frequency band".
[i.8] ETSI TS 102 265: "Digital Enhanced Cordless Telecommunications (DECT); DECT access to IP
networks".
[i.9] Recommendation ITU-T P.311: "Transmission characteristics for wideband (150-7000 Hz) digital
handset telephones".
[i.10] ETSI TR 102 570: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Overview and Requirements".
[i.11] ETSI TS 102 527-1: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 1: Wideband Speech".
[i.12] ETSI TS 102 527-2: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 2: Support of transparent IP packet data".
[i.13] ETSI TS 102 527-3: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 3: Extended wideband speech services".
ETSI
---------------------- Page: 10 ----------------------
SIST EN 300 175-1 V2.9.1:2022
9 ETSI EN 300 175-1 V2.9.1 (2022-03)
[i.14] ETSI TS 102 527-4: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 4: Light Data Services; Software Update Over The Air (SUOTA), content
downloading and HTTP based applications".
[i.15] ETSI TS 102 527-5: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 5: Additional feature set nr. 1 for extended wideband speech services".
[i.16] Recommendation ITU-T V.42: "Error-correcting procedures for DCEs using asynchronous-to-
synchronous conversion".
[i.17] Recommendation ITU-T V.24: "List of definitions for interchange circuits between Data Terminal
Equipment (DTE) and data circuit-terminating equipment (DCE)".
[i.18] ETSI TS 102 939-1: "Digital Enhanced Cordless Telecommunications (DECT); Ultra Low Energy
(ULE); Machine to Machine Communications; Part 1: Home Automation Network (phase 1)".
[i.19] ETSI TS 102 939-2: "Digital Enhanced Cordless Telecommunications (DECT); Ultra Low Energy
(ULE); Machine to Machine Communications; Part 2: Home Automation Network (phase 2)".
[i.20] IEEE 802.11-2012™: "IEEE Standard for Information technology--Telecommunications and
information exchange between systems Local and metropolitan area networks--Specific
requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY)
Specifications".
[i.21] Recommendation ITU-T G.722 (2012): "7 kHz audio-coding within 64 kbit/s".
[i.22] Recommendation ITU-T G.729.1 (2006): "G.729-based Embedded Variable bit-rate coder: An
8-32 kbit/s scalable wideband coder bitstream interoperable with G.729".
[i.23] ISO/IEC 14496-3:2009: "Information technology -- Coding of audio-visual objects -- Part 3:
Audio" (ISO/IEC JTC1/SC29/WG11 (MPEG)).
[i.24] IETF RFC 3261: "SIP: Session Initiation Protocol".
[i.25] Recommendation ITU-T H.323: "Packet-based multimedia communications systems".
[i.26] ETSI TS 103 634: "Digital Enhanced Cordless Telecommunications (DECT); Low Complexity
Communication Codec plus (LC3plus)".
[i.27] ETSI TS 103 636-1: "DECT-2020 New Radio (NR); Part 1: Overview; Release 1".
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the following terms apply:
Access Rights Class (ARC): type of access to a DECT network, such as public, residential or private
Access Rights Details (ARD): unique number within one ARC
Access Rights Identity (ARI): globally unique identity that shows the access rights related to a service provider
NOTE: PARI = Primary ARI;
SARI = Secondary ARI;
TARI = Tertiary ARI.
algorithm: mathematical process or function that transforms an input into an output
algorithm identifier: designator to show which algorithm is in use, so that the correct one may be chosen
ETSI
---------------------- Page: 11 ----------------------
SIST EN 300 175-1 V2.9.1:2022
10 ETSI EN 300 175-1 V2.9.1 (2022-03)
antenna diversity: diversity implies that the Radio Fixed Part (RFP) for each bearer independently can select different
antenna properties such as gain, polarization, coverage patterns and other features that may affect the practical coverage
NOTE: A typical example is space diversity, provided by two vertically polarized antennas separated by 10 cm to
20 cm.
asymmetric algorithm: See public key algorithm.
attach: process whereby a Portable Part (PP) within the coverage area of a Fixed Part (FP) to which it has access rights,
notifies the FP that it is operative
authentication: corroboration that an entity is the one that is claimed
authentication of Fixed radio Termination (FT): process whereby the identity of an FT is verified to a DECT PT
authentication of Portable radio Termination (PT): process whereby a DECT PT is positively verified to be a
legitimate user of a particular FP
authentication (of a subscriber): process whereby a DECT subscriber is positively verified to be a legitimate user of a
particular FP
authentication of user: process whereby a DECT user is positively verified to be a legitimate user of a particular FP
bearer: See Medium Access Control (MAC) bearer or bearer service.
bearer handover: internal handover process provided by the MAC layer, whereby one MAC connection can modify its
underlying bearers while maintaining the service provided to the Data Link Control (DLC) layer
bearer service: type of telecommunication service that provides a defined capability for the transmission of signals
between user-network interfaces
broadcast: simplex point-to-multipoint mode of transmission
C-plane: control plane of the DECT protocol stacks, which contains all of the internal DECT protocol control, but may
also include some external user information
call: all of the Network (NWK) layer processes involved in one NWK layer peer-to-peer association
cell: domain served by a single antenna(e) system (including a leaky feeder) of one FP
Central Control Fixed Part (CCFP): physical grouping that contains the central elements of a FP
centrex: implementation of a private telecommunication network exchange that is not located on the premises of the
private network operator
Cipher Block Chaining Message Authentication Code (CBC-MAC): cryptographic technique for constructing a
message authentication code from a block cipher
Cipher Key (CK): value that is used to determine the transformation of plaintext to ciphertext in a cryptographic
algorithm
Cipher Key (CK) generation: process for generating cryptographic keys
ciphertext: output of a cryptographic algorithm
channel: See physical channel.
cluster: logical grouping of one or more cells between which bearer handover is possible
confidentiality: rendering information secret as ciphertext unless the capability is possessed to recover the plaintext
from ciphertext
connection: See MAC connection.
connection handover: internal handover process provided by the DLC layer, whereby one set of DLC entities (C-plane
and U-plane) can re-route data from one MAC connection to a second new MAC connection, while maintaining the
service provided to the NWK layer
ETSI
---------------------- Page: 12 ----------------------
SIST EN 300 175-1 V2.9.1:2022
11 ETSI EN 300 175-1 V2.9.1 (2022-03)
Connection Less mode (C/L): transmission mode that transfers one packet (one self-contained unit) of data from one
source point to one (or more) destination points in a single phase
Connection Oriented mode (C/O): transmission mode that transfers data from one source point to one or more
destination points using a protocol based on three phases:
• "Set-up";
• "Data transfer"; and
• "Release".
Cordless Radio Fixed Part (CRFP): Wireless Relay Station (WRS) that provides independent bearer control to a PT
and FT for relayed connections
Counter with CBC-MAC (CCM): authenticated encryption algorithm designed to provide both authentication and
confidentiality
countermeasure: device, instrument or procedure used to counter
...
SLOVENSKI STANDARD
oSIST prEN 300 175-1 V2.8.5:2022
01-marec-2022
Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Skupni vmesnik (CI) - 1.
del: Pregled
Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI) - Part
1: Overview
Ta slovenski standard je istoveten z: ETSI EN 300 175-1 V2.8.5 (2021-12)
ICS:
33.070.30 Digitalne izboljšane Digital Enhanced Cordless
brezvrvične telekomunikacije Telecommunications (DECT)
(DECT)
oSIST prEN 300 175-1 V2.8.5:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 300 175-1 V2.8.5:2022
---------------------- Page: 2 ----------------------
oSIST prEN 300 175-1 V2.8.5:2022
Draft ETSI EN 300 175-1 V2.8.5 (2021-12)
EUROPEAN STANDARD
Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI);
Part 1: Overview
---------------------- Page: 3 ----------------------
oSIST prEN 300 175-1 V2.8.5:2022
2 Draft ETSI EN 300 175-1 V2.8.5 (2021-12)
Reference
REN/DECT-00351
Keywords
7 kHz, audio, broadband, codec, DECT, handsfree,
IMT-2000, loudspeaking, mobility, narrowband,
quality, radio, speech, TDD, TDMA, telephony,
terminal
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 300 175-1 V2.8.5:2022
3 Draft ETSI EN 300 175-1 V2.8.5 (2021-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 19
3.3 Abbreviations . 20
4 Structure . 26
4.0 General . 26
4.1 Part 1: Overview . 26
4.2 Part 2: Physical Layer (PHL) . 26
4.3 Part 3: Medium Access Control (MAC) layer . 26
4.4 Part 4: Data Link Control (DLC) layer . 26
4.5 Part 5: Network (NWK) layer . 26
4.6 Part 6: Identities and addressing . 27
4.7 Part 7: Security features . 27
4.8 Part 8: Speech and audio coding and transmission . 27
5 The objectives of the CI standard . 27
6 General description of the system . 28
7 Description of the protocol architecture . 30
7.1 General . 30
7.2 The DECT layered structure . 30
7.3 Physical Layer (PHL) . 31
7.4 MAC layer . 31
7.5 DLC layer . 31
7.6 Network (NWK) layer . 31
7.7 Lower Layer Management Entity (LLME) . 32
7.8 Interworking Units (IWU) . 32
8 Proprietary escapes within the CI . 32
8.0 General . 32
8.1 Primary escape routes . 33
8.2 Secondary escape routes . 33
9 Levels of conformance . 34
10 Further development of the DECT standard . 34
10.1 IMT-2000 . 34
10.2 The DECT Packet Radio Service (DPRS) . 34
10.3 DECT in international markets . 34
10.3.0 General . 34
10.3.1 United States of America . 35
10.3.2 Japan . 35
10.4 The New Generation DECT (NG-DECT) . 35
10.5 DECT Ultra Low Energy (ULE) . 36
10.6 DECT Evolution . 37
10.7 DECT-2020 NR . 38
Annex A (informative): Bibliography . 39
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 300 175-1 V2.8.5:2022
4 Draft ETSI EN 300 175-1 V2.8.5 (2021-12)
Annex B (informative): Change history . 40
History . 41
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 300 175-1 V2.8.5:2022
5 Draft ETSI EN 300 175-1 V2.8.5 (2021-12)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Digital Enhanced Cordless
Telecommunications (DECT), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI
standards EN Approval Procedure.
The present document is part 1 of a multi-part deliverable covering the Common Interface (CI) for the Digital Enhanced
Cordless Telecommunications (DECT), as identified below:
Part 1: "Overview";
Part 2: "Physical Layer (PHL)";
Part 3: "Medium Access Control (MAC) layer";
Part 4: "Data Link Control (DLC) layer";
Part 5: "Network (NWK) layer";
Part 6: "Identities and addressing";
Part 7: "Security features";
Part 8: "Speech and audio coding and transmission".
The following aspects of the present document are subject to controlled distribution:
a) DECT identities, as defined in ETSI EN 300 175-6 [6];
b) some DECT cryptographic algorithms.
The cryptographic algorithms subjected to controlled distribution specify the details of the DECT Standard
Authentication Algorithm (DSAA) and the DECT Standard Cipher (DSC). The cryptographic algorithms DECT
Standard Authentication Algorithm #2 (DSAA2) and DECT Standard Cipher #2 (DSC2) are not subjected to controlled
distribution.
ETSI
---------------------- Page: 7 ----------------------
oSIST prEN 300 175-1 V2.8.5:2022
6 Draft ETSI EN 300 175-1 V2.8.5 (2021-12)
These aspects are distributed on an individual basis. Further information and details of the current distribution
procedures can be obtained from the ETSI Secretariat at the address on the second page of the present document.
Further details of the DECT system may be found in ETSI TR 101 178 [i.4], ETSI ETR 043 [i.5] and ETSI
TR 102 185 [i.6].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 8 ----------------------
oSIST prEN 300 175-1 V2.8.5:2022
7 Draft ETSI EN 300 175-1 V2.8.5 (2021-12)
1 Scope
The present document gives an introduction and overview of the complete Digital Enhanced Cordless
Telecommunications (DECT) Common Interface (CI).
The present document contains an abstract of the other parts of the DECT standard together with a general
description of:
• the objectives of the present document;
• the DECT Common Interface;
• the protocol architecture of DECT.
The present document also provides an extensive vocabulary; in particular it contains the common definitions of all the
technical terms used in different parts of the present document.
The present document includes New Generation DECT, a further development of the DECT standard introducing
wideband speech, improved data services, new slot types and other technical enhancements.
The present document includes DECT Evolution.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] Void.
[2] ETSI EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 2: Physical Layer (PHL)".
[3] ETSI EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 3: Medium Access Control (MAC) layer".
[4] ETSI EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 4: Data Link Control (DLC) layer".
[5] ETSI EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 5: Network (NWK) layer".
[6] ETSI EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 6: Identities and addressing".
[7] ETSI EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 7: Security features".
[8] ETSI EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 8: Speech and audio coding and transmission".
ETSI
---------------------- Page: 9 ----------------------
oSIST prEN 300 175-1 V2.8.5:2022
8 Draft ETSI EN 300 175-1 V2.8.5 (2021-12)
[9] ETSI EN 300 176 (all parts): "Digital Enhanced Cordless Telecommunications (DECT); Test
specification".
[10] Recommendation ITU-R M.1457-15: "Detailed specifications of the terrestrial radio interfaces of
International Mobile Telecommunications-2000 (IMT-2000)".
[11] ETSI EN 301 649: "Digital Enhanced Cordless Telecommunications (DECT); DECT Packet
Radio Service (DPRS)".
[12] ETSI TS 102 497: "Digital Enhanced Cordless Telecommunications (DECT); DECT in the
1 920 MHz to 1 930 MHz Unlicensed Personal Communications Services (UPCS) frequency
band; Specific requirements".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[i.2] Recommendation ITU-R SM.1046-2: "Definition of spectrum use and efficiency of a radio
system".
[i.3] Recommendation ITU-R M.816-1: "Framework for services supported on International Mobile
Telecommunications-2000 (IMT-2000)".
[i.4] ETSI TR 101 178: "Digital Enhanced Cordless Telecommunications (DECT); A High Level Guide
to the DECT Standardization".
[i.5] ETSI ETR 043: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface
(CI); Services and facilities requirements specification".
[i.6] ETSI TR 102 185: "Digital Enhanced Cordless Telecommunications (DECT); Data Services
Profile (DSP); Profile overview".
[i.7] ETSI ETR 310: "Digital Enhanced Cordless Telecommunications (DECT); Traffic capacity and
spectrum requirements for multi-system and multi-service DECT applications co-existing in a
common frequency band".
[i.8] ETSI TS 102 265: "Digital Enhanced Cordless Telecommunications (DECT); DECT access to IP
networks".
[i.9] Recommendation ITU-T P.311: "Transmission characteristics for wideband (150-7000 Hz) digital
handset telephones".
[i.10] ETSI TR 102 570: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Overview and Requirements".
[i.11] ETSI TS 102 527-1: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 1: Wideband Speech".
[i.12] ETSI TS 102 527-2: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 2: Support of transparent IP packet data".
[i.13] ETSI TS 102 527-3: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 3: Extended wideband speech services".
ETSI
---------------------- Page: 10 ----------------------
oSIST prEN 300 175-1 V2.8.5:2022
9 Draft ETSI EN 300 175-1 V2.8.5 (2021-12)
[i.14] ETSI TS 102 527-4: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 4: Light Data Services; Software Update Over The Air (SUOTA), content
downloading and HTTP based applications".
[i.15] ETSI TS 102 527-5: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 5: Additional feature set nr. 1 for extended wideband speech services".
[i.16] Recommendation ITU-T V.42: "Error-correcting procedures for DCEs using asynchronous-to-
synchronous conversion".
[i.17] Recommendation ITU-T V.24: "List of definitions for interchange circuits between Data Terminal
Equipment (DTE) and data circuit-terminating equipment (DCE)".
[i.18] ETSI TS 102 939-1: "Digital Enhanced Cordless Telecommunications (DECT); Ultra Low Energy
(ULE); Machine to Machine Communications; Part 1: Home Automation Network (phase 1)".
[i.19] ETSI TS 102 939-2: "Digital Enhanced Cordless Telecommunications (DECT); Ultra Low Energy
(ULE); Machine to Machine Communications; Part 2: Home Automation Network (phase 2)".
[i.20] IEEE 802.11-2012™: "IEEE Standard for Information technology--Telecommunications and
information exchange between systems Local and metropolitan area networks--Specific
requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY)
Specifications".
[i.21] Recommendation ITU-T G.722 (2012): "7 kHz audio-coding within 64 kbit/s".
[i.22] Recommendation ITU-T G.729.1 (2006): "G.729-based Embedded Variable bit-rate coder: An
8-32 kbit/s scalable wideband coder bitstream interoperable with G.729".
[i.23] ISO/IEC 14496-3:2009: "Information technology -- Coding of audio-visual objects -- Part 3:
Audio" (ISO/IEC JTC1/SC29/WG11 (MPEG)).
[i.24] IETF RFC 3261: "SIP: Session Initiation Protocol".
[i.25] Recommendation ITU-T H.323: "Packet-based multimedia communications systems".
[i.26] ETSI TS 103 634: "Digital Enhanced Cordless Telecommunications (DECT); Low Complexity
Communication Codec plus (LC3plus)".
[i.27] ETSI TS 103 636-1: "DECT-2020 New Radio (NR); Part 1 : Overview; Release 1".
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the following terms apply:
Access Rights Class (ARC): type of access to a DECT network, such as public, residential or private
Access Rights Details (ARD): unique number within one ARC
Access Rights Identity (ARI): globally unique identity that shows the access rights related to a service provider
NOTE: PARI = Primary ARI;
SARI = Secondary ARI;
TARI = Tertiary ARI.
algorithm: mathematical process or function that transforms an input into an output
algorithm identifier: designator to show which algorithm is in use, so that the correct one may be chosen
ETSI
---------------------- Page: 11 ----------------------
oSIST prEN 300 175-1 V2.8.5:2022
10 Draft ETSI EN 300 175-1 V2.8.5 (2021-12)
antenna diversity: diversity implies that the Radio Fixed Part (RFP) for each bearer independently can select different
antenna properties such as gain, polarization, coverage patterns and other features that may affect the practical coverage
NOTE: A typical example is space diversity, provided by two vertically polarized antennas separated by 10 cm to
20 cm.
asymmetric algorithm: See public key algorithm.
attach: process whereby a Portable Part (PP) within the coverage area of a Fixed Part (FP) to which it has access rights,
notifies the FP that it is operative
authentication: corroboration that an entity is the one that is claimed
authentication of Fixed radio Termination (FT): process whereby the identity of an FT is verified to a DECT PT
authentication of Portable radio Termination (PT): process whereby a DECT PT is positively verified to be a
legitimate user of a particular FP
authentication (of a subscriber): process whereby a DECT subscriber is positively verified to be a legitimate user of a
particular FP
authentication of user: process whereby a DECT user is positively verified to be a legitimate user of a particular FP
bearer: See Medium Access Control (MAC) bearer or bearer service.
bearer handover: internal handover process provided by the MAC layer, whereby one MAC connection can modify its
underlying bearers while maintaining the service provided to the Data Link Control (DLC) layer
bearer service: type of telecommunication service that provides a defined capability for the transmission of signals
between user-network interfaces
broadcast: simplex point-to-multipoint mode of transmission
C-plane: control plane of the DECT protocol stacks, which contains all of the internal DECT protocol control, but may
also include some external user information
call: all of the Network (NWK) layer processes involved in one NWK layer peer-to-peer association
cell: domain served by a single antenna(e) system (including a leaky feeder) of one FP
Central Control Fixed Part (CCFP): physical grouping that contains the central elements of a FP
centrex: implementation of a private telecommunication network exchange that is not located on the premises of the
private network operator
Cipher Block Chaining Message Authentication Code (CBC-MAC): cryptographic technique for constructing a
message authentication code from a block cipher
Cipher Key (CK): value that is used to determine the transformation of plaintext to ciphertext in a cryptographic
algorithm
Cipher Key (CK) generation: process for generating cryptographic keys
ciphertext: output of a cryptographic algorithm
channel: See physical channel.
cluster: logical grouping of one or more cells between which bearer handover is possible
confidentiality: rendering information secret as ciphertext unless the capability is possessed to recover the plaintext
from ciphertext
connection: See MAC connection.
connection handover: internal handover process provided by the DLC layer, whereby one set of DLC entities (C-plane
and U-plane) can re-route data from one MAC connection to a second new MAC connection, while maintaining the
service provided to the NWK layer
ETSI
---------------------- Page: 12 ----------------------
oSIST prEN 300 175-1 V2.8.5:2022
11 Draft ETSI EN 300 175-1 V2.8.5 (2021-12)
Connection Less mode (C/L): transmission mode that transfers one packet (one self-contained unit) of data from one
source point to one (or more) destination points in a single phase
Connection Oriented mode (C/O): transmission mode that transfers data from one source point to one or more
destination points using a protocol based on three phases:
• "Set-up";
• "Data transfer"; and
• "Release".
Cordless Radio Fixed Part (CRFP): Wireless Relay Station (WRS) that provides independent bearer control to a PT
and FT for relayed connections
Counter with CBC-MAC (CCM): authenticated encryption algorithm designed to provide both authentication and
confidentiality
countermeasure: device, instrument or procedure used to count
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.