ETSI EN 302 326-2 V1.1.1 (2005-12)

Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment

DEN/TM-04130-2

Fiksni radijski sistemi – Večtočkovna oprema in antene – 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE za digitalno večtočkovno radijsko opremo

General Information

• Status: Published
• Publication Date: 03-Nov-2008
• Technical Committee: TM 4 2 - TM Point-to-Mulipoint Systems
• Current Stage: 12 - Completion
• Due Date: 30-Dec-2005
• Completion Date: 22-Dec-2005
• Mandate: M/284
• Ref Project: SIST EN 302 326-2 V1.1.1:2006 - Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 302 326-2 V1.1.1:2006
01-april-2006
)LNVQLUDGLMVNLVLVWHPL±9HþWRþNRYQDRSUHPDLQDQWHQH±GHO+DUPRQL]LUDQL(1
NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(]DGLJLWDOQRYHþWRþNRYQR
UDGLMVNRRSUHPR
Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN
covering the essential requirements of article 3.2 of the R&TTE Directive for Digital
Multipoint Radio Equipment
Ta slovenski standard je istoveten z: EN 302 326-2 Version 1.1.1
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
33.120.40 Antene Aerials
SIST EN 302 326-2 V1.1.1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 302 326-2 V1.1.1:2006

---------------------- Page: 2 ----------------------

SIST EN 302 326-2 V1.1.1:2006

ETSI EN 302 326-2 V1.1.1 (2005-12)
Candidate Harmonized European Standard (Telecommunications series)


Fixed Radio Systems;
Multipoint Equipment and Antennas;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
for Digital Multipoint Radio Equipment

---------------------- Page: 3 ----------------------

SIST EN 302 326-2 V1.1.1:2006
 2 ETSI EN 302 326-2 V1.1.1 (2005-12)



Reference
DEN/TM-04130-2
Keywords
access, antenna, DFRS, DRRS, FWA, multipoint,
radio, system
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2005.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 302 326-2 V1.1.1:2006
 3 ETSI EN 302 326-2 V1.1.1 (2005-12)
Contents
Intellectual Property Rights.6
Foreword.6
0 Introduction.7
0.1 General.7
0.2 Applicability to the R&TTE Directive .7
1 Scope.10
1.1 General.10
1.2 Classification of equipment.11
1.3 Profiles.11
1.3.1 General.11
1.3.2 Equipment profiles.11
1.3.3 Antenna profiles.13
1.3.4 System profiles.14
1.4 Frequency ranges.14
1.5 Access methods.14
1.6 Other relevant system characteristics .15
1.7 Bit rates.15
2 References.16
3 Definitions, symbols and abbreviations .17
3.1 Definitions.17
3.2 Symbols.20
3.3 Abbreviations.20
4 RF reference architecture .21
5 Technical requirements specifications.22
5.1 General.22
5.2 Environmental profile.23
5.3 Transmitting phenomena.23
5.3.1 General.23
5.3.2 Transmitter output power.23
5.3.2.1 General.23
5.3.2.2 Maximum power.24
5.3.2.3 Output power tolerance .24
5.3.3 Transmitter output frequency error/stability (output frequency tolerance).24
5.3.4 Adjacent channel power.25
5.3.4.1 Transmitter spectrum density masks .25
5.3.4.2 Discrete (CW) spectral lines exceeding the spectrum mask (all stations).28
5.3.5 Transmitter spurious emissions.29
5.3.6 Transmitter power control (ATPC and RTPC).29
5.3.6.1 General.29
5.3.6.2 Automatic Transmitter Power Control (ATPC) .30
5.3.6.3 Remote Transmitter Power Control (RTPC).30
5.3.7 Remote Frequency Control (RFC).30
5.3.8 Dynamic Change of Modulation Order .30
5.4 Receiving phenomena.31
5.4.1 General.31
5.4.2 Receiver spurious emissions.31
5.4.3 Minimum RSL.31
5.4.3.1 General.31
5.4.3.2 Single signal performance.31
5.4.3.3 Performance at maximum loading (EqC-PET = D only) .33
5.4.4 Interference sensitivity.34
5.4.4.1 Co-channel interference.34
5.4.4.2 Adjacent channel interference.36
ETSI

---------------------- Page: 5 ----------------------

SIST EN 302 326-2 V1.1.1:2006
 4 ETSI EN 302 326-2 V1.1.1 (2005-12)
5.4.4.3 CW interference.38
5.5 Special requirements for equipment with integral antennas.39
5.5.1 General.39
5.5.2 Radiation Pattern Envelope (Off-axis EIRP density).39
5.5.3 Antenna Gain.39
6 Testing for conformance with technical requirements .39
6.1 General.39
6.2 Environmental profile.40
6.3 Transmitting phenomena.41
6.3.1 General.41
6.3.1.1 Summary table for transmitter test conditions .41
6.3.1.2 Spectrum analyser settings.42
6.3.2 Transmitter output power.43
6.3.2.1 General.43
6.3.2.2 Maximum power.43
6.3.2.3 Nominal output power tolerance.43
6.3.3 Transmitter output frequency error/stability (output frequency tolerance).43
6.3.4 Adjacent channel power (transmitter spectrum density masks).43
6.3.4.1 Transmitter spectrum density masks .43
6.3.4.2 Discrete (CW) spectral lines exceeding the spectrum mask (all stations).44
6.3.5 Transmitter spurious emissions.45
6.3.6 Transmitter power control (ATPC and RTPC).45
6.3.6.1 General.45
6.3.6.2 Automatic Transmitter Power Control (ATPC) .45
6.3.6.3 Remote Transmitter Power Control (RTPC).46
6.3.7 Remote Frequency Control (RFC).46
6.3.8 Dynamic Change of Modulation Order .47
6.4 Receiving phenomena.47
6.4.1 General.47
6.4.2 Receiver spurious emissions.48
6.4.3 Minimum RSL.48
6.4.3.1 General.48
6.4.3.2 Single signal performance.48
6.4.3.3 Performance at maximum loading (EqC-PET = D only) .48
6.4.4 Interference sensitivity.48
6.4.4.1 Co-channel interference.48
6.4.4.2 Adjacent channel interference.49
6.4.4.3 CW interference.49
6.5 Special requirements for equipment with integral antennas.50
6.5.1 General.50
6.5.2 Radiation Pattern Envelope (Off-axis EIRP density).50
6.5.3 Antenna Gain.50
Annex A (normative): Test report in relation to flexible systems applications .51
A.1 Wide radio-frequency band covering units specification and tests .51
A.1.1 Radio equipment.51
A.1.2 Antennas for DFRS .53
A.2 Multirate/Multiformat covering equipment specification and tests .53
Annex B (normative): System capacity.54
B.1 General.54
B.2 Capacity of equipment with EqC-PET = T, O or M.54
B.3 Capacity of equipment with EqC-PET = F .54
B.4 Capacity of equipment with EqC-PET = D.55
B.5 Capacity of equipment with EqC-PET = H.55
Annex C (normative): The EN Requirements Table (EN-RT) .56
ETSI

---------------------- Page: 6 ----------------------

SIST EN 302 326-2 V1.1.1:2006
 5 ETSI EN 302 326-2 V1.1.1 (2005-12)
Annex D (informative): Spectrum mask requirements when ATPC and/or RTPC are
implemented .57
D.1 ATPC impact.57
D.2 RTPC Impact.58
Annex E (informative): Summary Table of EqC subject to conformance declaration.59
Annex F (informative): The EN title in the official languages .60
Annex G (informative): Bibliography.61
History .62

ETSI

---------------------- Page: 7 ----------------------

SIST EN 302 326-2 V1.1.1:2006
 6 ETSI EN 302 326-2 V1.1.1 (2005-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Transmission and Multiplexing (TM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [2].
Technical specifications relevant to Directive 1999/5/EC [2] are given in annex C.
This multi-part deliverable covers characteristics and requirements for fixed multipoint radio equipment and antennas
using a variety of access and duplex methods and operating at a variety of bit rates in frequency bands as specified in
the present document.
The present document is part 2 of a multi-part deliverable covering the Fixed Radio Systems; Multipoint Equipment and
Antennas, as identified below:
Part 1: "Overview and Requirements for Digital Multipoint Radio Systems";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for
Digital Multipoint Radio Equipment";
Part 3: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for
Multipoint Radio Antennas".
The present document and EN 302 326-3 [12] are Harmonized ENs and essential requirements are those requirements
which are essential under article 3.2 of the R&TTE Directive [2].
In the above, "equipment" includes equipment with integral antennas, and "antennas" include requirements for antennas
whether they are integral or non-integral.
The present document with EN 302 326-3 [12] will replace and supersede the harmonized EN 301 753
(see bibliography) for all MP equipment and antennas.
The date of cessation of presumption of conformity to R&TTE Directive [2] with reference to EN 301 753 (see
bibliography, latest version published) is proposed to be two years after the date of publication in the OJ EC of the
present document.

ETSI

---------------------- Page: 8 ----------------------

SIST EN 302 326-2 V1.1.1:2006
 7 ETSI EN 302 326-2 V1.1.1 (2005-12)
National transposition dates
Date of adoption of this EN: 16 December 2005
Date of latest announcement of this EN (doa): 31 March 2006
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 September 2006
Date of withdrawal of any conflicting National Standard (dow): 30 September 2007

0 Introduction
0.1 General
For the general background, rationale and structure of the present document see also the clause "Introduction" in
EN 302 326-1 [11].
0.2 Applicability to the R&TTE Directive
The present document is part of a set of standards designed to fit in a modular structure to cover all radio and
telecommunications terminal equipment under the R&TTE Directive [2]. Each standard is a module in the structure.
The modular structure is shown in figure 1.
ETSI

---------------------- Page: 9 ----------------------

SIST EN 302 326-2 V1.1.1:2006
 8 ETSI EN 302 326-2 V1.1.1 (2005-12)

Disability*
3.3f
Emergency*
3.3e
Fraud*
3.3d
3.3c
Privacy*
No harm to the network*
3.3b
* If needed
Scoped by
Interworking via the network*
equipment
3.3a class or type
Interworking with the network
Use of spectrum
3.2
New radio harmonized standards
Spectrum
Scoped by frequency and/or equipment type
Radio Product EMC
EN 301 489 multi-part EMC standard
3.1b
EMC
Generic and product standards also notified under EMC Directive
- If needed, new standards for human exposure to
Electromagnetic Fields,
- if needed, new standards for acoustic safety
3.1a
Standards also notified under LV Directive
Safety
Non-radio Radio (RE)
TTE Non-TTE

Figure 1: Modular structure for the various standards used under the R&TTE Directive [2]
The left hand edge of figure 1 shows the different clauses of article 3 of the R&TTE Directive [2].
For article 3.3 various horizontal boxes are shown. Dotted lines indicate that at the time of publication of the present
document essential requirements in these areas have to be adopted by the Commission. If such essential requirements
are adopted and as far and as long as they are applicable, they will justify individual standards whose scope is likely to
be specified by function or interface type.
ETSI

---------------------- Page: 10 ----------------------

SIST EN 302 326-2 V1.1.1:2006
 9 ETSI EN 302 326-2 V1.1.1 (2005-12)
The vertical boxes show the standards under article 3.2 for the use of the radio spectrum by radio equipment. The
scopes of these standards are specified either by frequency (normally in the case where frequency bands are
harmonized) or by radio equipment type.
For article 3.1b the diagram shows EN 301 489 (see bibliography), the multi-part product EMC standard for radio used
under the EMC Directive 89/336/EEC (see bibliography).
NOTE: For Fixed Radio Systems, EN 301 489-1 and EN 301 489-4 (see bibliography) are relevant.
For article 3.1a the diagram shows the existing safety standards currently used under the LV Directive 73/23/EEC
(see bibliography) and new standards covering human exposure to electromagnetic fields. New standards covering
acoustic safety may also be required.
The bottom of the figure shows the relationship of the standards to radio equipment and telecommunications terminal
equipment. A particular equipment may be radio equipment, telecommunications terminal equipment or both. A radio
spectrum standard will apply if it is radio equipment. An article 3.3 standard will apply as well only if the relevant
essential requirement under the R&TTE Directive [2] is adopted by the Commission and if the equipment in question is
covered by the scope of the corresponding standard. Thus, depending on the nature of the equipment, the essential
requirements under the R&TTE Directive [2] may be covered in a set of standards.
The modularity principle has been taken because:
• it minimizes the number of standards needed. Because equipment may, in fact, have multiple interfaces and
functions it is not practicable to produce a single standard for each possible combination of functions that may
occur in an equipment;
• it provides scope for standards to be added:
- under article 3.2 when new frequency bands are agreed; or
- under article 3.3 should the Commission take the necessary decisions
without requiring alteration of standards that are already published;
• it clarifies, simplifies and promotes the usage of Harmonized Standards as the relevant means of conformity
assessment.
ETSI

---------------------- Page: 11 ----------------------

SIST EN 302 326-2 V1.1.1:2006
 10 ETSI EN 302 326-2 V1.1.1 (2005-12)
1 Scope
1.1 General
The present document is intended to cover the provisions of the R&TTE Directive [2] regarding article 3.2, which states
that "[.] radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio
communications and orbital resources so as to avoid harmful interference".
The present document is applicable to the essential requirements of equipment (including equipment with integral
antennas) used in Multipoint (MP) Digital Fixed Radio Systems (DFRS).
The present document, together with EN 302 326-3 [12] are intended to replace and supersede, after a suitable tr
...