ETSI ETS 300 836-1 ed.1 (1998-05)

Broadband Radio Access Networks (BRAN); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Conformance testing specification; Part 1: Radio type approval and Radio Frequency (RF) conformance test specification

DE/BRAN-10-02D

Širokopasovna radijska dostopovna omrežja (BRAN) – Zelo zmogljivo radijsko lokalno omrežje (HIPERLAN), tip 1 – Specifikacija za preskušanje skladnosti – 1. del: Specifikacija odobritve radijskega tipa in preskušanja radiofrekvenčne (RF) skladnosti

General Information

• Status: Published
• Publication Date: 12-May-1998
• Technical Committee: BRAN 10 - RES 10 migrated WIs
• Current Stage: 12 - Completion
• Due Date: 15-May-1998
• Completion Date: 13-May-1998
• Mandate: T-325
• Mandate: T-353
• Ref Project: SIST ETS 300 836-1 E1:2006 - Broadband Radio Access Networks (BRAN); HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1; Conformance testing specification; Part 1: Radio type approval and Radio Frequency (RF) conformance test specification

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 836-1 E1:2006
01-februar-2006
âLURNRSDVRYQDUDGLMVNDGRVWRSRYQDRPUHåMD%5$1±=HOR]PRJOMLYRUDGLMVNR
ORNDOQRRPUHåMH+,3(5/$1WLS±6SHFLILNDFLMD]DSUHVNXãDQMHVNODGQRVWL±
GHO6SHFLILNDFLMDRGREULWYHUDGLMVNHJDWLSDLQSUHVNXãDQMDUDGLRIUHNYHQþQH5)
VNODGQRVWL
Broadband Radio Access Networks (BRAN); HIgh PErformance Radio Local Area
Network (HIPERLAN) Type 1; Conformance testing specification; Part 1: Radio type
approval and Radio Frequency (RF) conformance test specification
Ta slovenski standard je istoveten z: ETS 300 836-1 Edition 1
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
35.110 Omreževanje Networking
SIST ETS 300 836-1 E1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 836-1 E1:2006

---------------------- Page: 2 ----------------------

SIST ETS 300 836-1 E1:2006
EUROPEAN ETS 300 836-1
TELECOMMUNICATION May 1998
STANDARD
Source: BRAN Reference: DE/BRAN-10-02D
ICS: 33.020
Key words: HIPERLAN, LAN, radio, testing
Broadband Radio Acces Networks (BRAN);
HIgh PErformance Radio Local Area Network (HIPERLAN)
Type 1;
Conformance testing specification;
Part 1: Radio type approval and Radio Frequency (RF)
conformance test specification
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Internet: [e-mail] - http://www.etsi.fr - http://www.etsi.org
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1998. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 836-1 E1:2006
Page 2
ETS 300 836-1: May 1998
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 836-1 E1:2006
Page 3
ETS 300 836-1: May 1998
Contents
Foreword .7
1 Scope .9
2 Normative references.9
3 Definitions, symbols and abbreviations.9
3.1 Definitions .9
3.2 Symbols .11
3.3 Abbreviations .11
4 General.11
4.1 Supplier declarations .11
4.2 Presentation of equipment for type testing .12
4.2.1 Choice of model .12
4.2.2 Presentation .12
4.3 Design.12
4.3.1 General.12
4.3.2 Controls .12
4.4 Recording of measurement results.12
5 Test conditions .12
5.1 Normal and extreme test conditions .12
5.2 Power sources .13
5.3 Normal test conditions .13
5.3.1 Normal temperature and humidity.13
5.3.2 Normal power source .13
5.3.2.1 Mains voltage.13
5.3.2.2 Lead-acid battery power sources used on vehicles.13
5.3.2.3 Other power sources .13
5.4 Extreme test conditions .13
5.4.1 Extreme temperatures.13
5.4.2 Extreme power source voltages.14
5.4.2.1 Mains voltage.14
5.4.2.2 Lead-acid battery power sources used on vehicles.14
5.4.2.3 Power sources using other types of batteries.14
5.4.2.4 Other power sources .14
5.4.3 Procedure for tests at extreme temperatures .14
6 Transmitter .15
6.1 Frequency error and phase error.15
6.1.1 Definition and applicability .15
6.1.2 Conformance requirement .15
6.1.3 Test purpose .16
6.1.4 Test method .16
6.1.4.1 Initial conditions .16
6.1.4.2 Procedure .16
6.1.5 Test limits .17
6.1.5.1 Frequency error .17
6.1.5.2 Phase error.18
6.1.5.3 Frequency deviation .18
6.2 Transmit peak envelope power.18
6.2.1 Definition and applicability .18
6.2.2 Conformance requirement .18
6.2.3 Test purpose .18
6.2.4 Test method .18
6.2.4.1 Conducted measurement .18

---------------------- Page: 5 ----------------------

SIST ETS 300 836-1 E1:2006
Page 4
ETS 300 836-1: May 1998
6.2.4.1.1 Initial conditions. 18
6.2.4.1.2 Procedure. 19
6.2.4.2 Radiated measurement. 19
6.2.4.2.1 Initial conditions. 19
6.2.4.2.2 Procedure. 19
6.2.5 Test limits. 20
6.3 Output spectrum due to modulation and switching . 20
6.3.1 Definition and applicability . 20
6.3.2 Conformance requirement. 20
6.3.3 Test purpose. 20
6.3.4 Test method. 20
6.3.4.1 Initial conditions. 20
6.3.4.2 Procedure. 21
6.3.5 Test limits. 22
6.4 Unwanted emissions outside the HIPERLAN bands. 22
6.4.1 Definition and applicability . 22
6.4.2 Conformance requirement. 23
6.4.3 Test purpose. 23
6.4.4 Test method. 23
6.4.4.1 Initial conditions. 23
6.4.4.2 Procedure. 23
6.4.5 Test limits. 24
6.5 Defer transmission . 24
6.5.1 Definition and applicability . 24
6.5.2 Conformance requirements. 24
6.5.3 Test purpose. 25
6.5.4 Test method. 25
6.5.4.1 Initial conditions. 25
6.5.4.2 Procedure. 25
6.5.5 Test limits. 25
7 Receiver. 26
7.1 Frame Error Ratio (FER) definition . 26
7.2 Sensitivity limit. 26
7.2.1 Conformance requirement. 26
7.2.2 Test purpose. 26
7.2.3 Test method. 27
7.2.3.1 Initial conditions. 27
7.2.3.2 Procedure. 27
7.2.4 Test limits. 27
7.3 Maximum operating input. 27
7.3.1 Conformance requirement. 27
7.3.2 Test purpose. 27
7.3.3 Test method. 27
7.3.3.1 Initial conditions. 27
7.3.3.2 Procedure. 27
7.3.4 Test limits. 27
7.4 Selectivity . 28
7.4.1 Selectivity definition . 28
7.4.2 Conformance requirement. 28
7.4.3 Test purpose. 28
7.4.4 Test method. 28
7.4.4.1 Initial conditions. 28
7.4.4.2 Procedure. 28
7.4.5 Test limits. 28
7.5 Receiver unwanted emissions . 28
7.5.1 Definition. 28
7.5.2 Conformance requirement. 28
7.5.3 Test purpose. 29
7.5.4 Test method. 29
7.5.4.1 Initial conditions. 29
7.5.4.2 Procedure. 29
7.5.5 Test limits. 29

---------------------- Page: 6 ----------------------

SIST ETS 300 836-1 E1:2006
Page 5
ETS 300 836-1: May 1998
7.6 Long frame receiver operation.29
7.6.1 Conformance requirement .30
7.6.2 Test purpose .30
7.6.3 Test method .30
7.6.3.1 Initial conditions .30
7.6.3.2 Procedure .30
7.6.4 Test Limits.30
7.7 Receiver operation with frequency and data rate error.30
7.7.1 Conformance requirement .30
7.7.2 Test purpose .30
7.7.3 Test method .30
7.7.3.1 Initial conditions .30
7.7.3.2 Procedure .30
7.7.4 Test limits .30
8 Measurement uncertainty values .31
Annex A (normative): Test sites and arrangements for radiated measurements .32
A.1 Test sites.32
A.1.1 Open air test sites.32
A.1.2 Anechoic chamber .32
A.1.1.1 General.33
A.1.1.2 Description .33
A.1.1.3 Influence of parasitic reflections.34
A.1.1.4 Calibration and mode of use .35
A.2 Test antenna .35
A.3 Substitution antenna.35
Annex B (normative): General description of measurement .36
B.1 Conducted measurements.36
B.2 Radiated measurements.36
B.3 Substitution measurement .37
Annex C (normative): Description of Protocol Data Unit (PDU) sequences for test use.38
C.1 Transmitter testing measurement test sequence (user specified channel number) .38
C.1.1 Transmission conditions and pre-conditions.38
C.1.2 PDUs transmitted by the UUT, common characteristics .38
C.1.3 Transmitted PDU sequence characteristics: .38
C.1.4 Other SS Activity during sequence reception: .38
C.2 Transmission deferral test sequence .39
C.2.1 Transmission conditions and pre-conditions.39
C.2.2 PDUs transmitted by the UUT, common characteristics .39
C.2.3 Transmitted PDU sequence characteristics: .39
C.2.4 Other SS Activity during sequence reception: .39
C.3 Transmission deferral test sequence, (MADT) .40
C.3.1 Transmission conditions and pre-conditions:.40
C.3.2 PDUs transmitted by the UUT, common characteristics .40
C.3.3 Transmitted PDU sequence characteristics: .40
C.3.4 Other SS activity: .40
C.4 Transmission deferral test sequence, (MADT maximum value).41
C.4.1 Transmission conditions and pre-conditions.41
C.4.2 PDUs transmitted by the UUT, common characteristics .41
C.4.3 Transmitted PDU sequence characteristics .41

---------------------- Page: 7 ----------------------

SIST ETS 300 836-1 E1:2006
Page 6
ETS 300 836-1: May 1998
C.4.4 Other SS Activity: . 41
C.5 Basic receiver FER measurement test sequence, (channel 4) . 42
C.5.1 Transmission conditions and pre-conditions. 42
C.5.2 Transmitted PDUs common characteristics:. 42
C.5.3 Transmitted PDU sequence characteristics:. 42
C.5.4 Other SS activity during sequence transmission:. 42
C.6 Long frame, receiver FER measurement test sequence. 42
C.6.1 Transmission conditions and pre-conditions. 43
C.6.2 Transmitted PDUs common characteristics. 43
C.6.3 Transmitted PDU sequence characteristics:. 43
C.6.4 Other SS Activity during sequence transmission: . 43
C.7 Receiver FER with frequency and data rate error test sequence. 43
C.7.1 Transmission conditions and pre-conditions. 44
C.7.2 Transmitted PDUs common characteristics. 44
C.7.3 Transmitted PDU sequence characteristics:. 44
C.7.4 Other SS Activity during sequence transmission: . 44
C.8 Receiver emissions and adjacent channel test sequence, (channel 3). 44
C.8.1 Transmission conditions and pre-conditions. 45
C.8.2 Transmitted PDUs common characteristics. 45
C.8.3 Transmitted PDU sequence characteristics:. 45
C.8.4 Other SS activity during sequence transmission:. 45
Annex D (normative): Subclauses of this ETS relevant for compliance with the essential
requirements of relevant EC Council Directives . 46
Annex E (informative): Bibliography . 47
History. 48

---------------------- Page: 8 ----------------------

SIST ETS 300 836-1 E1:2006
Page 7
ETS 300 836-1: May 1998
Foreword
This European Telecommunication Standard (ETS) has been produced by the ETSI Project Broadband
Radio Access Networks (BRAN) of the European Telecommunications Standards Institute (ETSI).
This ETS has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 83/189/EEC (as amended) laying down a procedure for the provision of
information in the field of technical standards and regulations.
This ETS, together with ETS 300 826 [3], is intended to become a Harmonized Standard, the reference of
which will be published in the Official Journal of the European Communities referencing the Council
Directive on the approximation of the laws of the Member States relating to electromagnetic compatibility
("the EMC Directive") (89/336/EEC as amended).
Technical specifications relevant to the EMC Directive are given in annex D.
This ETS consists of 4 parts as follows:
Part 1: "Radio type approval and Radio Frequency (RF) conformance test specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification";
Part 4: "Abstract Test Suite (ATS) specification".
Transposition dates
Date of adoption of this ETS: 1 May 1998
Date of latest announcement of this ETS (doa): 31 August 1998
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 28 February 1999
Date of withdrawal of any conflicting National Standard (dow): 28 February 1999

---------------------- Page: 9 ----------------------

SIST ETS 300 836-1 E1:2006
Page 8
ETS 300 836-1: May 1998
Blank page

---------------------- Page: 10 ----------------------

SIST ETS 300 836-1 E1:2006
Page 9
ETS 300 836-1: May 1998
1 Scope
This European Telecommunication Standard (ETS) specifies the radio type approval and Radio
Frequency (RF) conformance testing of the HIgh PErformance Radio Local Area Network (HIPERLAN)
functional specification as specified in ETS 300 652 [1].
HIPERLAN is confined to the lowest two Open Systems Interconnection (OSI) layers, namely the physical
layer and the data link layer. Functions of higher layers are required for operation and interworking of a
complete system and are outside the scope of HIPERLAN.
This ETS applies only to Units Under Test (UUT) operating in the band 5,15 GHz to 5,30 GHz. The use of
the band 17,1 GHz to 17,3 GHz is covered by other HIPERLAN standards.
2 Normative references
This ETS incorporates by dated and undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 652 (1996) and prA1 (1996): "Radio Equipment and Systems (RES);
HIgh PErformance Radio Local Area Network (HIPERLAN); Type 1; Functional
specification".
[2] ETS 300 836-2: "Radio Equipment and Systems (RES); HIgh PErformance
Radio Local Area Network (HIPERLAN) Type 1; Conformance testing
specification; Part 2: Protocol Implementation Conformance Statement (PICS)
proforma specification".
[3] ETS 300 826: "Radio Equipment and Systems (RES); ElectroMagnetic
Compatibility (EMC) standard for 2,4 GHz wide band transmission systems and
HIgh PErformance Radio Local Area Network (HIPERLAN) equipment in the 5,2
and 17,2 GHz bands".
[4] ETR 028: "Radio Equipment and Systems (RES); Uncertainties in the
measurement of mobile radio equipment characteristics".
[5] ISO/IEC 8802: "Information technology - Telecommunications and information
exchange between systems - Local and metropolitan area networks - Specific
requirements".
[6] CISPR 16-1: "Specification for radio disturbance and immunity measuring
apparatus and methods - Part 1: Radio disturbance and immunity measuring
apparatus".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of this ETS, the following definitions apply, in addition to those given in ETS 300 652 [1].
all conditions: Normal and extreme conditions.
antenna diversity: A plurality of RF input ports to a HIPERLAN receiver, or output ports of a transmitter.
For reception, it is implied that the set of signals from the set of ports can have low cross-correlation. For
transmission, it is implied that transmitted signals from the set of ports can have low cross-correlation at a
general point in space. It is also allowed that a HIPERLAN node can select different antenna properties
such as gain, polarization, coverage pattern, or other feature(s) that can affect the practical coverage. A
typical example is space diversity.
burst: A period during which radio waves are intentionally transmitted, preceded and succeeded by
periods during which no intentional transmission is made.

---------------------- Page: 11 ----------------------

SIST ETS 300 836-1 E1:2006
Page 10
ETS 300 836-1: May 1998
combined HIPERLAN equipment: A c
...