T-325 -

The present document contains the Abstract Test Suite (ATS) to test the BRAN HIPERLAN Type 2; Data Link Control (DLC) protocol; Part 1: Basic data transport functions [1]. The objective of the present document is to  provide a basis for conformance tests for HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturers' HIPERLAN Type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [3] and ISO/IEC 9646-2 [4]) as well as the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the MT side ATS. Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the AP side ATS. Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of the MT side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) Proforma of the AP side ATS.

The document shall contain the TSS & TP for HIPERLAN/2 RLC (see work item  DTS/BRAN-0020004-2). It covers both the Access Point and the Terminal side.

This European Telecommunication Standard (ETS) specifies the radio type approval and Radio Frequency (RF) conformance testing of the HIgh PErformance Radio Local Area Network (HIPERLAN) functional specification as specified in ETS 300 652 [1]. HIPERLAN is confined to the lowest two Open Systems Interconnection (OSI) layers, namely the physical layer and the data link layer. Functions of higher layers are required for operation and interworking of a complete system and are outside the scope of HIPERLAN. This ETS applies only to Units Under Test (UUT) operating in the band 5,15 GHz to 5,30 GHz. The use of the band 17,1 GHz to 17,3 GHz is covered by other HIPERLAN standards.

The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for BRAN HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol, Part 1: Basic data transport function, as defined in TS 101 761-1 [1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [2]. It details (in tabular form) the implementation options, i.e. the optional functions additional to those which are mandatory to implement.

The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the packet based convergence layer for HIPERLAN 2; Part 1: Common part, as defined in TS 101 493-1 [1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [2]. It details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement.

The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the BRAN HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 1: Basic data transport function. The objective of the present document is to provide a basis for conformance tests for HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturers' HIPERLAN Type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [3] and ISO/IEC 9646-2 [4]) as well as the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology.

This European Telecommunication Standard (ETS) specifies the Abstract Test Suite (ATS) for the Medium Access Control (MAC) and Channel Access Control (CAC) protocol parts of the HIgh PErformance Radio Local Area Network (HIPERLAN) Type 1 functional specification as specified in ETS 300 652 [1]. ETS 300 836-3 [8] specifies the Test Suite Structure and Test Purposes (TSS&TP) related to this ATS specification. In this ETS, the term "HIPERLAN" is used to refer to HIPERLAN, Type 1.

The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the BRAN HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 1: Common part. The objective of the present document is to provide a basis for conformance tests for HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturer's HIPERLAN Type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [3] and ISO/IEC 9646-2 [4]) as well as the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology.

The present document contains the Abstract Test Suite (ATS) to test the BRAN HIPERLAN Type 2; Data Link Control (DLC) protocol; Radio Link Control (RLC) sublayer [1]. The objective of the present document is to provide a basis for conformance tests for HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturers' HIPERLAN Type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [3] and ISO/IEC 9646-2 [4]) as well as the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the MT side ATS. Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the AP side ATS. Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of the MT side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) Proforma of the AP side ATS.

This European Telecommunication Standard (ETS) provides the Protocol Implementation Conformance Statement (PICS) proforma for the RES HIPERLAN protocol as specified in ETS 300 652 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3]. The supplier of a protocol implementation which is claimed to conform to ETS 300 652 [1] is required to complete a copy of the PICS proforma provided in annex A of this ETS and is required to provide the information necessary to identify both the supplier and the implementation.

The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the Radio Link Control (RLC) layer of Hiperlan type 2 as defined in TS 101 761-2 [1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [2]. It details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement.

This European Telecommunication Standard (ETS) specifies the Test Suite Structure and Test Purposes (TSS&TP) for the Medium Access Control (MAC) and Channel Access Control (CAC) protocol parts of the HIgh PErformance Radio Local Area Network (HIPERLAN), Type 1 functional specification as specified in ETS 300 652 [1]. In this ETS, the term "HIPERLAN" is used to refer to HIPERLAN, Type 1.

The present document contains the Abstract Test Suite (ATS) to test the BRAN HIPERLAN Type 2; Packet based convergence layer; Part 1: Common part. The objective of the present document is to provide a basis for conformance tests for HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturers' HIPERLAN Type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [3] and ISO/IEC 9646-2 [4]) as well as the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the MT side ATS. Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the AP side ATS. Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of the MT side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) Proforma of the AP side ATS.

DEN/BRAN-002T004-2-1

DEN/BRAN-002T004-2-2

DEN/BRAN-0024T04-1-3

DEN/BRAN-002T004-1-3

DEN/BRAN-002T004-1-2

DEN/BRAN-0024T04-1-2

DEN/BRAN-002T004-2-3

DEN/BRAN-002T004-1-1

DEN/BRAN-0024T04-1-1

DE/BRAN-10-02A

DE/BRAN-10-02D

DE/BRAN-10-02C

DE/BRAN-10-02B