ETSI EN 301 908-2 V11.1.1 (2016-07)
IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
REN/MSG-TFES-11-02-RED
Celična omrežja IMT - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive za radijsko opremo 2014/53/EU - 2. del: CDMA z neposrednim razprševanjem (“Direct Spread”) (UTRA FDD) (UE)
Ta dokument zajema zahteve za uporabniško opremo UTRA FDD iz izdaj 99, 4, 5, 6, 7, 8, 9, 10 in 11 dokumenta 3GPP™, kot je določeno v dokumentu ETSI TS 125 101 [4]. To vključuje zahteve za uporabniško opremo iz izdaje 12 dokumenta 3GPP™,
kot je določeno v dokumentu ETSI TS 125 101 [4]. Poleg tega ta dokument zajema zahteve za uporabniško opremo UTRA FDD, ki deluje v frekvenčnih pasovih, določenih v dokumentu ETSI TS 102 735 [i.4].
OPOMBA: Za pas XX:
– zahteve iz tega dokumenta, ki veljajo za uporabniško opremo, zasnovano kot mobilno ali nomadsko, in
se merijo na antenskem vhodu, so v skladu z ustrezno zahtevo, opredeljeno kot
TRP (skupna sevana moč), kot je opisana v Sklepu Komisije 2010/267/EU [i.6], Sklepu Odbora za elektronske komunikacije (09)03 [i.7] in poročilu CEPT 30 [i.8];
– za uporabniško opremo, zasnovano za priključitev ali namestitev, ta dokument ne obravnava zahtev, opisanih v Sklepu Komisije 2010/267/EU [i.6], Sklepu Odbora za elektronske komunikacije (09)03 [i.7] in
poročilu CEPT 30 [i.8].
Ta dokument vsebuje zahteve, s katerimi se dokazuje, da radijska oprema učinkovito uporablja radijski spekter in tudi podpira njegovo učinkovito uporabo, tako da ne pride do škodljivih motenj.
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 301 908-2 V11.1.1:2016
01-oktober-2016
&HOLþQDRPUHåMD,07+DUPRQL]LUDQLVWDQGDUGNL]DMHPDELVWYHQH]DKWHYHþOHQD
GLUHNWLYH]DUDGLMVNRRSUHPR(8GHO &'0$]QHSRVUHGQLP
UD]SUãHYDQMHP ³'LUHFW6SUHDG´ 875$)'' 8(
IMT cellular networks - Harmonised Standard covering the essential requirements of
article 3.2 of the Radio Equipment Directive 2014/53/EU - Part 2: CDMA Direct Spread
(UTRA FDD) User Equipment (UE)
Ta slovenski standard je istoveten z: ETSI EN 301 908-2 V11.1.1 (2016-07)
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.070.99 Druge mobilne storitve Other mobile services
SIST EN 301 908-2 V11.1.1:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 908-2 V11.1.1:2016
---------------------- Page: 2 ----------------------
SIST EN 301 908-2 V11.1.1:2016
ETSI EN 301 908-2 V11.1.1 (2016-07)
HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU;
Part 2: CDMA Direct Spread (UTRA FDD)
User Equipment (UE)
---------------------- Page: 3 ----------------------
SIST EN 301 908-2 V11.1.1:2016
2 ETSI EN 301 908-2 V11.1.1 (2016-07)
Reference
REN/MSG-TFES-11-02-RED
Keywords
3G, 3GPP, cellular, digital, IMT, mobile, radio,
regulation, UMTS, UTRA, WCDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 908-2 V11.1.1:2016
3 ETSI EN 301 908-2 V11.1.1 (2016-07)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 11
3.3 Abbreviations . 11
4 Technical requirements specifications . 13
4.1 Environmental profile . 13
4.2 Conformance requirements . 13
4.2.0 General . 13
4.2.1 Introduction. 13
4.2.2 Transmitter maximum output power. 14
4.2.2.1 Transmitter maximum output power . 14
4.2.2.1.1 Definition. 14
4.2.2.1.2 Limits . 14
4.2.2.1.3 Conformance . 14
4.2.2.2 Transmitter maximum output power for DC-HSUPA . 15
4.2.2.2.1 Definition for DC-HSUPA . 15
4.2.2.2.2 Limits for DC-HSUPA . 15
4.2.2.2.3 Conformance . 15
4.2.2.3 Transmitter maximum output power for UL OLTD . 15
4.2.2.3.1 Definition for UL OLTD . 15
4.2.2.3.2 Limits for UL OLTD . 15
4.2.2.3.3 Conformance . 16
4.2.3 Transmitter spectrum emission mask . 16
4.2.3.1 Transmitter spectrum emission mask . 16
4.2.3.1.1 Definition. 16
4.2.3.1.2 Limits . 16
4.2.3.1.3 Conformance . 17
4.2.3.2 Transmitter spectrum emission mask for DC-HSUPA . 17
4.2.3.2.1 Definition for DC-HSUPA . 17
4.2.3.2.2 Limits for DC-HSUPA . 17
4.2.3.2.3 Conformance . 18
4.2.3.3 Transmitter spectrum emission mask for UL OLTD . 18
4.2.3.3.1 Definition for UL OLTD . 18
4.2.3.3.2 Limits for UL OLTD . 18
4.2.3.3.3 Conformance . 18
4.2.3.4 Transmitter spectrum emission mask for UL CLTD Activation state 1 . 18
4.2.3.4.1 Definition for UL CLTD Activation state 1 . 18
4.2.3.4.2 Limits for UL CLTD Activation state 1 . 19
4.2.3.4.3 Conformance . 19
4.2.4 Transmitter spurious emis sions . 19
4.2.4.1 Transmitter spurious emissions . 19
4.2.4.1.1 Definition. 19
4.2.4.1.2 Limits . 19
4.2.4.1.3 Conformance . 21
4.2.4.2 Transmitter spurious emissions for DC-HSUPA . 21
4.2.4.2.1 Definition for DC-HSUPA . 21
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 908-2 V11.1.1:2016
4 ETSI EN 301 908-2 V11.1.1 (2016-07)
4.2.4.2.2 Limits for DC-HSUPA . 22
4.2.4.2.3 Conformance . 23
4.2.5 Transmitter minimum output power . 24
4.2.5.1 Transmitter minimum output power. 24
4.2.5.1.1 Definition. 24
4.2.5.1.2 Limits . 24
4.2.5.1.3 Conformance . 24
4.2.5.2 Transmitter minimum output power for DC-HSUPA . 24
4.2.5.2.1 Definition for DC-HSUPA . 24
4.2.5.2.2 Limits for DC-HSUPA . 24
4.2.5.2.3 Conformance . 24
4.2.5.3 Transmitter minimum output power for UL CLTD Activation state 1 . 24
4.2.5.3.1 Definition for UL CLTD Activation state 1 . 24
4.2.5.3.2 Limits for UL CLTD Activation state 1 . 24
4.2.5.3.3 Conformance . 24
4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 25
4.2.6.1 Definition . 25
4.2.6.2 Limits . 25
4.2.6.3 Conformance . 25
4.2.7 Receiver blocking characteristics . 25
4.2.7.1 Definition . 25
4.2.7.2 Limits . 25
4.2.7.3 Conformance . 27
4.2.8 Receiver spurious response . 27
4.2.8.1 Definition . 27
4.2.8.2 Limits . 27
4.2.8.3 Conformance . 28
4.2.9 Receiver intermodulation characteristics . 28
4.2.9.1 Definition . 28
4.2.9.2 Limits . 28
4.2.9.3 Conformance . 29
4.2.10 Receiver spurious emissions . 29
4.2.10.1 Definition . 29
4.2.10.2 Limits . 29
4.2.10.3 Conformance . 30
4.2.11 Out-of-synchronization handling of output power . 30
4.2.11.1 Definition . 30
4.2.11.2 Limits . 30
4.2.11.3 Conformance . 32
4.2.12 Transmitter Adjacent Channel Leakage power Ratio (ACLR) . 32
4.2.12.1 Transmitter adjacent channel leakage power ratio (ACLR) . 32
4.2.12.1.1 Definition. 32
4.2.12.1.2 Limits . 32
4.2.12.1.3 Conformance . 32
4.2.12.2 Adjacent channel leakage power ratio for DC-HSUPA . 32
4.2.12.2.1 Definition for DC-HSUPA . 32
4.2.12.2.2 Limits for DC-HSUPA . 32
4.2.12.2.3 Conformance . 33
4.2.12.3 Adjacent channel leakage power ratio for UL OLTD . 33
4.2.12.3.1 Definition for UL OLTD . 33
4.2.12.3.2 Limits for UL OLTD . 33
4.2.12.3.3 Conformance . 33
4.2.12.4 Adjacent channel leakage power ratio for UL CLTD Activation state 1 . 33
4.2.12.4.1 Definition for UL CLTD Activation state 1 . 33
4.2.12.4.2 Limits for UL CLTD Activation state 1 . 33
4.2.12.4.3 Conformance . 34
4.2.13 Receiver Reference Sensitivity level . 34
4.2.13.0 General . 34
4.2.13.1 Definition . 34
4.2.13.2 Limits . 34
4.2.13.3 Conformance . 34
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 908-2 V11.1.1:2016
5 ETSI EN 301 908-2 V11.1.1 (2016-07)
5 Testing for compliance with technical requirements . 34
5.1 Environmental conditions for testing . 34
5.2 Interpretation of the measurement results . 35
5.3 Essential radio test suites . 36
5.3.0 General . 36
5.3.1 Transmitter maximum output power. 36
5.3.1.1 Method of test . 36
5.3.1.1.1 UTRA . 36
5.3.1.1.1A DC-HSUPA . 37
5.3.1.1.1B UL OLTD . 37
5.3.1.2 Test requirements . 38
5.3.2 Transmitter spectrum emission mask . 38
5.3.2.1 Method of test . 38
5.3.2.1.1 UEs not supporting HSDPA and/or E-DCH . 38
5.3.2.1.1A UEs supporting HSDPA and/or E-DCH . 39
5.3.2.1.1B DC-HSUPA . 39
5.3.2.1.1C UL OLTD . 40
5.3.2.1.1D UL CLTD Activation state 1 . 40
5.3.2.2 Test requirements . 41
5.3.3 Transmitter spurious emis sions . 41
5.3.3.1 Method of test . 41
5.3.3.1.1 UTRA . 41
5.3.3.1.1A DC-HSUPA . 42
5.3.3.2 Test requirements . 42
5.3.4 Transmitter minimum output power . 42
5.3.4.1 Method of test . 42
5.3.4.1.1 UTRA . 42
5.3.4.1.1A DC-HSUPA . 43
5.3.4.1.1B UL CLTD Activation state 1 . 43
5.3.4.2 Test requirements . 44
5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 44
5.3.5.1 Method of test . 44
5.3.5.1.1 Initial conditions . 44
5.3.5.1.2 Procedure . 44
5.3.5.2 Test requirements . 44
5.3.6 Receiver blocking characteristics . 44
5.3.6.1 Method of test . 44
5.3.6.1.1 Initial requirements . 44
5.3.6.1.2 Procedure . 45
5.3.6.2 Test requirements . 45
5.3.7 Receiver spurious response . 45
5.3.7.1 Method of test . 45
5.3.7.1.1 Initial conditions . 45
5.3.7.1.2 Procedure . 45
5.3.7.2 Test requirements . 46
5.3.8 Receiver Intermodulation characteristics . 46
5.3.8.1 Method of test . 46
5.3.8.1.1 Initial conditions . 46
5.3.8.1.2 Procedure . 46
5.3.8.2 Test requirements . 46
5.3.9 Receiver spurious emissions . 46
5.3.9.1 Method of test .
...
ETSI EN 301 908-2 V11.1.1 (2016-07)
HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU;
Part 2: CDMA Direct Spread (UTRA FDD)
User Equipment (UE)
---------------------- Page: 1 ----------------------
2 ETSI EN 301 908-2 V11.1.1 (2016-07)
Reference
REN/MSG-TFES-11-02-RED
Keywords
3G, 3GPP, cellular, digital, IMT, mobile, radio,
regulation, UMTS, UTRA, WCDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 301 908-2 V11.1.1 (2016-07)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 11
3.3 Abbreviations . 11
4 Technical requirements specifications . 13
4.1 Environmental profile . 13
4.2 Conformance requirements . 13
4.2.0 General . 13
4.2.1 Introduction. 13
4.2.2 Transmitter maximum output power. 14
4.2.2.1 Transmitter maximum output power . 14
4.2.2.1.1 Definition. 14
4.2.2.1.2 Limits . 14
4.2.2.1.3 Conformance . 14
4.2.2.2 Transmitter maximum output power for DC-HSUPA . 15
4.2.2.2.1 Definition for DC-HSUPA . 15
4.2.2.2.2 Limits for DC-HSUPA . 15
4.2.2.2.3 Conformance . 15
4.2.2.3 Transmitter maximum output power for UL OLTD . 15
4.2.2.3.1 Definition for UL OLTD . 15
4.2.2.3.2 Limits for UL OLTD . 15
4.2.2.3.3 Conformance . 16
4.2.3 Transmitter spectrum emission mask . 16
4.2.3.1 Transmitter spectrum emission mask . 16
4.2.3.1.1 Definition. 16
4.2.3.1.2 Limits . 16
4.2.3.1.3 Conformance . 17
4.2.3.2 Transmitter spectrum emission mask for DC-HSUPA . 17
4.2.3.2.1 Definition for DC-HSUPA . 17
4.2.3.2.2 Limits for DC-HSUPA . 17
4.2.3.2.3 Conformance . 18
4.2.3.3 Transmitter spectrum emission mask for UL OLTD . 18
4.2.3.3.1 Definition for UL OLTD . 18
4.2.3.3.2 Limits for UL OLTD . 18
4.2.3.3.3 Conformance . 18
4.2.3.4 Transmitter spectrum emission mask for UL CLTD Activation state 1 . 18
4.2.3.4.1 Definition for UL CLTD Activation state 1 . 18
4.2.3.4.2 Limits for UL CLTD Activation state 1 . 19
4.2.3.4.3 Conformance . 19
4.2.4 Transmitter spurious emis sions . 19
4.2.4.1 Transmitter spurious emissions . 19
4.2.4.1.1 Definition. 19
4.2.4.1.2 Limits . 19
4.2.4.1.3 Conformance . 21
4.2.4.2 Transmitter spurious emissions for DC-HSUPA . 21
4.2.4.2.1 Definition for DC-HSUPA . 21
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 301 908-2 V11.1.1 (2016-07)
4.2.4.2.2 Limits for DC-HSUPA . 22
4.2.4.2.3 Conformance . 23
4.2.5 Transmitter minimum output power . 24
4.2.5.1 Transmitter minimum output power. 24
4.2.5.1.1 Definition. 24
4.2.5.1.2 Limits . 24
4.2.5.1.3 Conformance . 24
4.2.5.2 Transmitter minimum output power for DC-HSUPA . 24
4.2.5.2.1 Definition for DC-HSUPA . 24
4.2.5.2.2 Limits for DC-HSUPA . 24
4.2.5.2.3 Conformance . 24
4.2.5.3 Transmitter minimum output power for UL CLTD Activation state 1 . 24
4.2.5.3.1 Definition for UL CLTD Activation state 1 . 24
4.2.5.3.2 Limits for UL CLTD Activation state 1 . 24
4.2.5.3.3 Conformance . 24
4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 25
4.2.6.1 Definition . 25
4.2.6.2 Limits . 25
4.2.6.3 Conformance . 25
4.2.7 Receiver blocking characteristics . 25
4.2.7.1 Definition . 25
4.2.7.2 Limits . 25
4.2.7.3 Conformance . 27
4.2.8 Receiver spurious response . 27
4.2.8.1 Definition . 27
4.2.8.2 Limits . 27
4.2.8.3 Conformance . 28
4.2.9 Receiver intermodulation characteristics . 28
4.2.9.1 Definition . 28
4.2.9.2 Limits . 28
4.2.9.3 Conformance . 29
4.2.10 Receiver spurious emissions . 29
4.2.10.1 Definition . 29
4.2.10.2 Limits . 29
4.2.10.3 Conformance . 30
4.2.11 Out-of-synchronization handling of output power . 30
4.2.11.1 Definition . 30
4.2.11.2 Limits . 30
4.2.11.3 Conformance . 32
4.2.12 Transmitter Adjacent Channel Leakage power Ratio (ACLR) . 32
4.2.12.1 Transmitter adjacent channel leakage power ratio (ACLR) . 32
4.2.12.1.1 Definition. 32
4.2.12.1.2 Limits . 32
4.2.12.1.3 Conformance . 32
4.2.12.2 Adjacent channel leakage power ratio for DC-HSUPA . 32
4.2.12.2.1 Definition for DC-HSUPA . 32
4.2.12.2.2 Limits for DC-HSUPA . 32
4.2.12.2.3 Conformance . 33
4.2.12.3 Adjacent channel leakage power ratio for UL OLTD . 33
4.2.12.3.1 Definition for UL OLTD . 33
4.2.12.3.2 Limits for UL OLTD . 33
4.2.12.3.3 Conformance . 33
4.2.12.4 Adjacent channel leakage power ratio for UL CLTD Activation state 1 . 33
4.2.12.4.1 Definition for UL CLTD Activation state 1 . 33
4.2.12.4.2 Limits for UL CLTD Activation state 1 . 33
4.2.12.4.3 Conformance . 34
4.2.13 Receiver Reference Sensitivity level . 34
4.2.13.0 General . 34
4.2.13.1 Definition . 34
4.2.13.2 Limits . 34
4.2.13.3 Conformance . 34
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 301 908-2 V11.1.1 (2016-07)
5 Testing for compliance with technical requirements . 34
5.1 Environmental conditions for testing . 34
5.2 Interpretation of the measurement results . 35
5.3 Essential radio test suites . 36
5.3.0 General . 36
5.3.1 Transmitter maximum output power. 36
5.3.1.1 Method of test . 36
5.3.1.1.1 UTRA . 36
5.3.1.1.1A DC-HSUPA . 37
5.3.1.1.1B UL OLTD . 37
5.3.1.2 Test requirements . 38
5.3.2 Transmitter spectrum emission mask . 38
5.3.2.1 Method of test . 38
5.3.2.1.1 UEs not supporting HSDPA and/or E-DCH . 38
5.3.2.1.1A UEs supporting HSDPA and/or E-DCH . 39
5.3.2.1.1B DC-HSUPA . 39
5.3.2.1.1C UL OLTD . 40
5.3.2.1.1D UL CLTD Activation state 1 . 40
5.3.2.2 Test requirements . 41
5.3.3 Transmitter spurious emis sions . 41
5.3.3.1 Method of test . 41
5.3.3.1.1 UTRA . 41
5.3.3.1.1A DC-HSUPA . 42
5.3.3.2 Test requirements . 42
5.3.4 Transmitter minimum output power . 42
5.3.4.1 Method of test . 42
5.3.4.1.1 UTRA . 42
5.3.4.1.1A DC-HSUPA . 43
5.3.4.1.1B UL CLTD Activation state 1 . 43
5.3.4.2 Test requirements . 44
5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 44
5.3.5.1 Method of test . 44
5.3.5.1.1 Initial conditions . 44
5.3.5.1.2 Procedure . 44
5.3.5.2 Test requirements . 44
5.3.6 Receiver blocking characteristics . 44
5.3.6.1 Method of test . 44
5.3.6.1.1 Initial requirements . 44
5.3.6.1.2 Procedure . 45
5.3.6.2 Test requirements . 45
5.3.7 Receiver spurious response . 45
5.3.7.1 Method of test . 45
5.3.7.1.1 Initial conditions . 45
5.3.7.1.2 Procedure . 45
5.3.7.2 Test requirements . 46
5.3.8 Receiver Intermodulation characteristics . 46
5.3.8.1 Method of test . 46
5.3.8.1.1 Initial conditions . 46
5.3.8.1.2 Procedure . 46
5.3.8.2 Test requirements . 46
5.3.9 Receiver spurious emissions . 46
5.3.9.1 Method of test . 46
5.3.9.1.1 Initial conditions . 46
5.3.9.1.2 Procedure . 47
5.3.9.2 Test requirements . 47
5.3.10 Out-of-synchronization handling of output power . 47
5.3.10.1 Method of test . 47
5.3.10.1.1 Initial conditions . 47
5.3.10.1.2 Procedure .
...
Final draft ETSI EN 301 908-2 V11.1.0 (2016-05)
HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU;
Part 2: CDMA Direct Spread (UTRA FDD)
User Equipment (UE)
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 301 908-2 V11.1.0 (2016-05)
Reference
REN/MSG-TFES-11-02-RED
Keywords
3G, 3GPP, cellular, digital, IMT, mobile, radio,
regulation, UMTS, UTRA, WCDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 301 908-2 V11.1.0 (2016-05)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 11
3.3 Abbreviations . 11
4 Technical requirements specifications . 13
4.1 Environmental profile . 13
4.2 Conformance requirements . 13
4.2.0 General . 13
4.2.1 Introduction. 13
4.2.2 Transmitter maximum output power. 14
4.2.2.1 Transmitter maximum output power . 14
4.2.2.1.1 Definition. 14
4.2.2.1.2 Limits . 14
4.2.2.1.3 Conformance . 14
4.2.2.2 Transmitter maximum output power for DC-HSUPA . 14
4.2.2.2.1 Definition for DC-HSUPA . 14
4.2.2.2.2 Limits for DC-HSUPA . 15
4.2.2.2.3 Conformance . 15
4.2.2.3 Transmitter maximum output power for UL OLTD . 15
4.2.2.3.1 Definition for UL OLTD . 15
4.2.2.3.2 Limits for UL OLTD . 15
4.2.2.3.3 Conformance . 15
4.2.3 Transmitter spectrum emission mask . 16
4.2.3.1 Transmitter spectrum emission mask . 16
4.2.3.1.1 Definition. 16
4.2.3.1.2 Limits . 16
4.2.3.1.3 Conformance . 16
4.2.3.2 Transmitter spectrum emission mask for DC-HSUPA . 16
4.2.3.2.1 Definition for DC-HSUPA . 16
4.2.3.2.2 Limits for DC-HSUPA . 16
4.2.3.2.3 Conformance . 17
4.2.3.3 Transmitter spectrum emission mask for UL OLTD . 17
4.2.3.3.1 Definition for UL OLTD . 17
4.2.3.3.2 Limits for UL OLTD . 17
4.2.3.3.3 Conformance . 17
4.2.3.4 Transmitter spectrum emission mask for UL CLTD Activation state 1 . 18
4.2.3.4.1 Definition for UL CLTD Activation state 1 . 18
4.2.3.4.2 Limits for UL CLTD Activation state 1 . 18
4.2.3.4.3 Conformance . 18
4.2.4 Transmitter spurious emis sions . 18
4.2.4.1 Transmitter spurious emissions . 18
4.2.4.1.1 Definition. 18
4.2.4.1.2 Limits . 18
4.2.4.1.3 Conformance . 20
4.2.4.2 Transmitter spurious emissions for DC-HSUPA . 20
4.2.4.2.1 Definition for DC-HSUPA . 20
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 301 908-2 V11.1.0 (2016-05)
4.2.4.2.2 Limits for DC-HSUPA . 21
4.2.4.2.3 Conformance . 22
4.2.5 Transmitter minimum output power . 23
4.2.5.1 Transmitter minimum output power. 23
4.2.5.1.1 Definition. 23
4.2.5.1.2 Limits . 23
4.2.5.1.3 Conformance . 23
4.2.5.2 Transmitter minimum output power for DC-HSUPA . 23
4.2.5.2.1 Definition for DC-HSUPA . 23
4.2.5.2.2 Limits for DC-HSUPA . 23
4.2.5.2.3 Conformance . 23
4.2.5.3 Transmitter minimum output power for UL CLTD Activation state 1 . 23
4.2.5.3.1 Definition for UL CLTD Activation state 1 . 23
4.2.5.3.2 Limits for UL CLTD Activation state 1 . 23
4.2.5.3.3 Conformance . 23
4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 23
4.2.6.1 Definition . 23
4.2.6.2 Limits . 24
4.2.6.3 Conformance . 24
4.2.7 Receiver blocking characteristics . 24
4.2.7.1 Definition . 24
4.2.7.2 Limits . 24
4.2.7.3 Conformance . 26
4.2.8 Receiver spurious response . 26
4.2.8.1 Definition . 26
4.2.8.2 Limits . 26
4.2.8.3 Conformance . 26
4.2.9 Receiver intermodulation characteristics . 26
4.2.9.1 Definition . 26
4.2.9.2 Limits . 27
4.2.9.3 Conformance . 27
4.2.10 Receiver spurious emissions . 27
4.2.10.1 Definition . 27
4.2.10.2 Limits . 27
4.2.10.3 Conformance . 28
4.2.11 Out-of-synchronization handling of output power . 28
4.2.11.1 Definition . 28
4.2.11.2 Limits . 29
4.2.11.3 Conformance . 30
4.2.12 Transmitter Adjacent Channel Leakage power Ratio (ACLR) . 30
4.2.12.1 Transmitter adjacent channel leakage power ratio (ACLR) . 30
4.2.12.1.1 Definition. 30
4.2.12.1.2 Limits . 30
4.2.12.1.3 Conformance . 30
4.2.12.2 Adjacent channel leakage power ratio for DC-HSUPA . 30
4.2.12.2.1 Definition for DC-HSUPA . 30
4.2.12.2.2 Limits for DC-HSUPA . 30
4.2.12.2.3 Conformance . 31
4.2.12.3 Adjacent channel leakage power ratio for UL OLTD . 31
4.2.12.3.1 Definition for UL OLTD . 31
4.2.12.3.2 Limits for UL OLTD . 31
4.2.12.3.3 Conformance . 31
4.2.12.4 Adjacent channel leakage power ratio for UL CLTD Activation state 1 . 31
4.2.12.4.1 Definition for UL CLTD Activation state 1 . 31
4.2.12.4.2 Limits for UL CLTD Activation state 1 . 31
4.2.12.4.3 Conformance . 32
4.2.13 Receiver Reference Sensitivity level . 32
4.2.13.0 General . 32
4.2.13.1 Definition . 32
4.2.13.2 Limits . 32
4.2.13.3 Conformance . 32
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 301 908-2 V11.1.0 (2016-05)
5 Testing for compliance with technical requirements . 32
5.1 Environmental conditions for testing . 32
5.2 Interpretation of the measurement results . 33
5.3 Essential radio test suites . 34
5.3.0 General . 34
5.3.1 Transmitter maximum output power. 34
5.3.1.1 Method of test . 34
5.3.1.1.1 UTRA . 34
5.3.1.1.1A DC-HSUPA . 35
5.3.1.1.1B UL OLTD . 35
5.3.1.2 Test requirements . 36
5.3.2 Transmitter spectrum emission mask . 36
5.3.2.1 Method of test . 36
5.3.2.1.1 UEs not supporting HSDPA and/or E-DCH . 36
5.3.2.1.1A UEs supporting HSDPA and/or E-DCH . 37
5.3.2.1.1B DC-HSUPA . 37
5.3.2.1.1C UL OLTD . 38
5.3.2.1.1D UL CLTD Activation state 1 . 38
5.3.2.2 Test requirements . 39
5.3.3 Transmitter spurious emis sions . 39
5.3.3.1 Method of test . 39
5.3.3.1.1 UTRA . 39
5.3.3.1.1A DC-HSUPA . 40
5.3.3.2 Test requirements . 40
5.3.4 Transmitter minimum output power . 40
5.3.4.1 Method of test . 40
5.3.4.1.1 UTRA . 40
5.3.4.1.1A DC-HSUPA . 41
5.3.4.1.1B UL CLTD Activation state 1 . 41
5.3.4.2 Test requirements . 41
5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 42
5.3.5.1 Method of test . 42
5.3.5.1.1 Initial conditions . 42
5.3.5.1.2 Procedure . 42
5.3.5.2 Test requirements . 42
5.3.6 Receiver blocking characteristics . 42
5.3.6.1 Method of test . 42
5.3.6.1.1 Initial requirements . 42
5.3.6.1.2 Procedure . 43
5.3.6.2 Test requirements . 43
5.3.7 Receiver spurious response . 43
5.3.7.1 Method of test . 43
5.3.7.1.1 Initial conditions . 43
5.3.7.1.2 Procedure . 43
5.3.7.2 Test requirements . 43
5.3.8 Receiver Intermodulation characteristics . 44
5.3.8.1 Method of test . 44
5.3.8.1.1 Initial conditions . 44
5.3.8.1.2 Procedure . 44
5.3.8.2 Test requirements . 44
5.3.9 Receiver spurious emissions . 44
5.3.9.1 Method of test . 44
5.3.9.1.1 Initial conditions . 44
5.3.9.1.2 Procedure . 44
5.3.9.2 Test requirements . 44
5.3.10 Out-of-synchronization handling of output power . 45
5.3.10.1 Method of test . 45
5.3.10.1.1 Initial conditions . 45
5.3.10.1
...
Draft ETSI EN 301 908-2 V11.0.1 (2015-10)
HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard covering the essential requirements of
article 3.2 of the Radio Equipment Directive 2014/53/EU;
Part 2: CDMA Direct Spread (UTRA FDD)
User Equipment (UE)
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 908-2 V11.0.1 (2015-10)
Reference
REN/MSG-TFES-11-02-RED
Keywords
3G, 3GPP, cellular, digital, IMT, mobile, radio,
regulation, UMTS, UTRA, WCDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2015.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 908-2 V11.0.1 (2015-10)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 11
3.3 Abbreviations . 11
4 Technical requirements specifications . 13
4.1 Environmental profile . 13
4.2 Conformance requirements . 13
4.2.0 General . 13
4.2.1 Introduction. 13
4.2.2 Transmitter maximum output power. 14
4.2.2.1 Transmitter maximum output power . 14
4.2.2.1.1 Definition. 14
4.2.2.1.2 Limits . 14
4.2.2.1.3 Conformance . 14
4.2.2.2 Transmitter maximum output power for DC-HSUPA . 14
4.2.2.2.1 Definition for DC-HSUPA . 14
4.2.2.2.2 Limits for DC-HSUPA . 14
4.2.2.2.3 Conformance . 15
4.2.2.3 Transmitter maximum output power for UL OLTD . 15
4.2.2.3.1 Definition for UL OLTD . 15
4.2.2.3.2 Limits for UL OLTD . 15
4.2.2.3.3 Conformance . 15
4.2.3 Transmitter spectrum emission mask . 16
4.2.3.1 Transmitter spectrum emission mask . 16
4.2.3.1.1 Definition. 16
4.2.3.1.2 Limits . 16
4.2.3.1.3 Conformance . 16
4.2.3.2 Transmitter spectrum emission mask for DC-HSUPA . 16
4.2.3.2.1 Definition for DC-HSUPA . 16
4.2.3.2.2 Limits for DC-HSUPA . 16
4.2.3.2.3 Conformance . 17
4.2.3.3 Transmitter spectrum emission mask for UL OLTD . 17
4.2.3.3.1 Definition for UL OLTD . 17
4.2.3.3.2 Limits for UL OLTD . 17
4.2.3.3.3 Conformance . 17
4.2.3.4 Transmitter spectrum emission mask for UL CLTD Activation state 1 . 18
4.2.3.4.1 Definition for UL CLTD Activation state 1 . 18
4.2.3.4.2 Limits for UL CLTD Activation state 1 . 18
4.2.3.4.3 Conformance . 18
4.2.4 Transmitter spurious emis sions . 18
4.2.4.1 Transmitter spurious emissions . 18
4.2.4.1.1 Definition. 18
4.2.4.1.2 Limits . 18
4.2.4.1.3 Conformance . 20
4.2.4.2 Transmitter spurious emissions for DC-HSUPA . 20
4.2.4.2.1 Definition for DC-HSUPA . 20
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 908-2 V11.0.1 (2015-10)
4.2.4.2.2 Limits for DC-HSUPA . 21
4.2.4.2.3 Conformance . 22
4.2.5 Transmitter minimum output power . 23
4.2.5.1 Transmitter minimum output power. 23
4.2.5.1.1 Definition. 23
4.2.5.1.2 Limits . 23
4.2.5.1.3 Conformance . 23
4.2.5.2 Transmitter minimum output power for DC-HSUPA . 23
4.2.5.2.1 Definition for DC-HSUPA . 23
4.2.5.2.2 Limits for DC-HSUPA . 23
4.2.5.2.3 Conformance . 23
4.2.5.3 Transmitter minimum output power for UL CLTD Activation state 1 . 23
4.2.5.3.1 Definition for UL CLTD Activation state 1 . 23
4.2.5.3.2 Limits for UL CLTD Activation state 1 . 23
4.2.5.3.3 Conformance . 23
4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 23
4.2.6.1 Definition . 23
4.2.6.2 Limits . 24
4.2.6.3 Conformance . 24
4.2.7 Receiver blocking characteristics . 24
4.2.7.1 Definition . 24
4.2.7.2 Limits . 24
4.2.7.3 Conformance . 26
4.2.8 Receiver spurious response . 26
4.2.8.1 Definition . 26
4.2.8.2 Limits . 26
4.2.8.3 Conformance . 26
4.2.9 Receiver intermodulation characteristics . 26
4.2.9.1 Definition . 26
4.2.9.2 Limits . 27
4.2.9.3 Conformance . 27
4.2.10 Receiver spurious emissions . 27
4.2.10.1 Definition . 27
4.2.10.2 Limits . 27
4.2.10.3 Conformance . 28
4.2.11 Out-of-synchronization handling of output power . 28
4.2.11.1 Definition . 28
4.2.11.2 Limits . 29
4.2.11.3 Conformance . 30
4.2.12 Transmitter Adjacent Channel Leakage power Ratio (ACLR) . 30
4.2.12.1 Transmitter adjacent channel leakage power ratio (ACLR) . 30
4.2.12.1.1 Definition. 30
4.2.12.1.2 Limits . 30
4.2.12.1.3 Conformance . 30
4.2.12.2 Adjacent channel leakage power ratio for DC-HSUPA . 30
4.2.12.2.1 Definition for DC-HSUPA . 30
4.2.12.2.2 Limits for DC-HSUPA . 30
4.2.12.2.3 Conformance . 31
4.2.12.3 Adjacent channel leakage power ratio for UL OLTD . 31
4.2.12.3.1 Definition for UL OLTD . 31
4.2.12.3.2 Limits for UL OLTD . 31
4.2.12.3.3 Conformance . 31
4.2.12.4 Adjacent channel leakage power ratio for UL CLTD Activation state 1 . 31
4.2.12.4.1 Definition for UL CLTD Activation state 1 . 31
4.2.12.4.2 Limits for UL CLTD Activation state 1 . 31
4.2.12.4.3 Conformance . 32
4.2.13 Receiver Reference Sensitivity level . 32
4.2.13.0 General . 32
4.2.13.1 Definition . 32
4.2.13.2 Limits . 32
4.2.13.3 Conformance . 32
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 908-2 V11.0.1 (2015-10)
5 Testing for compliance with technical requirements . 32
5.1 Environmental conditions for testing . 32
5.2 Interpretation of the measurement results . 33
5.3 Essential radio test suites . 34
5.3.0 General . 34
5.3.1 Transmitter maximum output power. 34
5.3.1.1 Method of test . 34
5.3.1.1.1 UTRA . 34
5.3.1.1.1A DC-HSUPA . 35
5.3.1.1.1B UL OLTD . 35
5.3.1.2 Test requirements . 36
5.3.2 Transmitter spectrum emission mask . 36
5.3.2.1 Method of test . 36
5.3.2.1.1 UEs not supporting HSDPA and/or E-DCH . 36
5.3.2.1.1A UEs supporting HSDPA and/or E-DCH . 37
5.3.2.1.1B DC-HSUPA . 37
5.3.2.1.1C UL OLTD . 38
5.3.2.1.1D UL CLTD Activation state 1 . 38
5.3.2.2 Test requirements . 39
5.3.3 Transmitter spurious emis sions . 39
5.3.3.1 Method of test . 39
5.3.3.1.1 UTRA . 39
5.3.3.1.1A DC-HSUPA . 40
5.3.3.2 Test requirements . 40
5.3.4 Transmitter minimum output power . 40
5.3.4.1 Method of test . 40
5.3.4.1.1 UTRA . 40
5.3.4.1.1A DC-HSUPA . 41
5.3.4.1.1B UL CLTD Activation state 1 . 41
5.3.4.2 Test requirements . 41
5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 42
5.3.5.1 Method of test . 42
5.3.5.1.1 Initial conditions . 42
5.3.5.1.2 Procedure . 42
5.3.5.2 Test requirements . 42
5.3.6 Receiver blocking characteristics . 42
5.3.6.1 Method of test . 42
5.3.6.1.1 Initial requirements . 42
5.3.6.1.2 Procedure . 43
5.3.6.2 Test requirements . 43
5.3.7 Receiver spurious response . 43
5.3.7.1 Method of test . 43
5.3.7.1.1 Initial conditions . 43
5.3.7.1.2 Procedure . 43
5.3.7.2 Test requirements . 43
5.3.8 Receiver Intermodulation characteristics . 44
5.3.8.1 Method of test . 44
5.3.8.1.1 Initial conditions . 44
5.3.8.1.2 Procedure . 44
5.3.8.2 Test requirements . 44
5.3.9 Receiver spurious emissions . 44
5.3.9.1 Method of test . 44
5.3.9.1.1 Initial conditions . 44
5.3.9.1.2 Procedure . 44
5.3.9.2 Test requirements . 44
5.3.10 Out-of-synchronization handling of output power . 45
5.3.10.1 Method of test . 45
5.3.10.1.1 Initial conditions . 45
5.3.10.1.2 Procedure .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.