Satellite Earth Stations and Systems (SES); Harmonized EN for satellite Earth Stations on board Vessels (ESVs) operating in the 11/12/14 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering essential requirements under article 3.2 of the R&TTE directive

DEN/SES-00110

Satelitske zemeljske postaje in sistemi (SES) – Harmonizirani EN za satelitske zemeljske postaje na ladjah, delujoče v frekvenčnih pasovih 11/12/14 GHz, razporejenih za fiksne satelitske storitve (FSS), ki zajema bistvene zahteve člena 3.2 direktive R&TTE

General Information

Status
Published
Publication Date
23-Aug-2006
Current Stage
12 - Completion
Due Date
14-Apr-2006
Completion Date
04-Apr-2006
Mandate

Buy Standard

Standard
EN 302 340 V1.1.1:2006
English language
61 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 302 340 V1.1.1:2006
01-julij-2006
6DWHOLWVNH]HPHOMVNHSRVWDMHLQVLVWHPL 6(6 ±+DUPRQL]LUDQL(1]DVDWHOLWVNH
]HPHOMVNHSRVWDMHQDODGMDKGHOXMRþHYIUHNYHQþQLKSDVRYLK*+]
UD]SRUHMHQLK]DILNVQHVDWHOLWVNHVWRULWYH )66 NL]DMHPDELVWYHQH]DKWHYHþOHQD
GLUHNWLYH5 77(
Satellite Earth Stations and Systems (SES); Harmonized EN for satellite Earth Stations
on board Vessels (ESVs) operating in the 11/12/14 GHz frequency bands allocated to
the Fixed Satellite Service (FSS) covering essential requirements under article 3.2 of the
R&TTE directive
Ta slovenski standard je istoveten z: EN 302 340 Version 1.1.1
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
SIST EN 302 340 V1.1.1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 302 340 V1.1.1:2006

---------------------- Page: 2 ----------------------

SIST EN 302 340 V1.1.1:2006

ETSI EN 302 340 V1.1.1 (2006-04)
Candidate Harmonized European Standard (Telecommunications series)

Satellite Earth Stations and Systems (SES);
Harmonized EN for
satellite Earth Stations on board Vessels (ESVs)
operating in the 11/12/14 GHz frequency bands
allocated to the Fixed Satellite Service (FSS)
covering essential requirements
under article 3.2 of the R&TTE directive

---------------------- Page: 3 ----------------------

SIST EN 302 340 V1.1.1:2006
 2 ETSI EN 302 340 V1.1.1 (2006-04)



Reference
DEN/SES-00110
Keywords
earth station, ESV, maritime, regulation, satellite
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2006.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 302 340 V1.1.1:2006
 3 ETSI EN 302 340 V1.1.1 (2006-04)
Contents
Intellectual Property Rights.6
Foreword.6
Introduction .7
1 Scope.9
2 References.10
3 Definitions, symbols and abbreviations .11
3.1 Definitions.11
3.2 Symbols.13
3.3 Abbreviations.13
4 Technical requirements specifications.14
4.1 General.14
4.1.1 Environmental profile.14
4.1.2 Operational configurations.14
4.1.3 ESV states and radio states .14
4.2 Conformance requirements.15
4.2.1 Off-axis spurious radiation .15
4.2.1.1 Justification.15
4.2.1.2 Specification.16
4.2.1.3 Conformance tests.17
4.2.2 On-axis spurious radiation for ESV.17
4.2.2.1 Justification.17
4.2.2.2 Specification.17
4.2.2.2.1 "Carrier-on" radio state.17
4.2.2.2.2 "Carrier-off" and "Emissions disabled" radio states.18
4.2.2.3 Conformance tests.18
4.2.3 Maximum ESV emissions towards the horizon.18
4.2.3.1 Justification.18
4.2.3.2 Specification.18
4.2.3.2.1 Specification 1: Maximum e.i.r.p. spectral density towards the horizon.18
4.2.3.2.2 Specification 2: Maximum e.i.r.p. towards the horizon.18
4.2.3.3 Conformance tests.18
4.2.4 Off-axis e.i.r.p. emission density within the band.18
4.2.4.1 Justification.18
4.2.4.2 Specification.19
4.2.4.3 Conformance tests.20
4.2.5 Carrier suppression.20
4.2.5.1 Justification.20
4.2.5.2 Specification.21
4.2.5.3 Conformance tests.21
4.2.6 Antenna pointing and polarization alignment for ESVs .21
4.2.6.1 Justification.21
4.2.6.2 Specification.21
4.2.6.3 Conformance tests.22
4.2.7 Cessation of emissions of the ESV .22
4.2.7.1 Justification.22
4.2.7.2 Specification.22
4.2.7.2.1 Specification 1: Mode of cessation of emissions.22
4.2.7.2.2 Specification 2: Conditions under which the ESV must cease emissions .23
4.2.7.2.3 Specification 3: Cessation of emissions .23
4.2.7.2.4 Specification 4: Fault conditions .23
4.2.7.3 Conformance tests.23
4.2.8 Identification of ESV .24
4.2.8.1 Justification.24
ETSI

---------------------- Page: 5 ----------------------

SIST EN 302 340 V1.1.1:2006
 4 ETSI EN 302 340 V1.1.1 (2006-04)
4.2.8.2 Specification.24
4.2.8.3 Conformance tests.24
4.2.9 Control and Monitoring Functions (CMFs) .24
4.2.9.1 CMF state diagram.24
4.2.9.2 Processor monitoring.25
4.2.9.2.1 Justification.25
4.2.9.2.2 Specification.25
4.2.9.2.3 Conformance tests.25
4.2.9.3 Transmit subsystem monitoring.26
4.2.9.3.1 Justification.26
4.2.9.3.2 Specification.26
4.2.9.3.3 Conformance tests.26
4.2.9.4 Power-on/Reset.26
4.2.9.4.1 Justification.26
4.2.9.4.2 Specification.26
4.2.9.4.3 Conformance tests.26
4.2.9.5 Control Channel (CC) and Response Channel (RC) .26
4.2.9.5.1 Justification.26
4.2.9.5.2 Specification.26
4.2.9.5.3 Conformance tests.27
4.2.9.6 Network control commands .27
4.2.9.6.1 Justification.27
4.2.9.6.2 Specification.27
4.2.9.6.3 Conformance test.28
4.2.9.7 Initial burst transmission .28
4.2.9.7.1 Justification.28
4.2.9.7.2 Specification.28
4.2.9.7.3 Conformance tests.28
5 Testing for compliance with technical requirements.29
5.1 Environmental conditions for testing .29
5.2 Essential radio test suites.29
6 Test methods for the complete ESV.29
6.1 General.29
6.2 Off-axis spurious radiation.30
6.2.1 Test method.30
6.2.1.0 Multi-carrier operation.30
6.2.1.1 Up to 2 000 MHz .31
6.2.1.1.1 Test site.31
6.2.1.1.2 Procedure.31
6.2.1.2 Above 2 000 MHz.32
6.2.1.2.1 Identification of the significant frequencies of spurious radiation .32
6.2.1.2.2 Measurement of radiated power levels of identified spurious radiation.32
6.2.1.2.3 Measurement of conducted spurious radiation at the antenna flange .34
6.3 On-axis spurious radiation.34
6.3.1 Test method.34
6.3.1.1 Test site.34
6.3.1.2 Method of measurement.35
6.3.1.2.1 General.35
6.3.1.2.2 Method of measurement at the antenna flange .35
6.3.1.2.3 Method of measurement with a test antenna .36
6.4 Maximum ESV emissions towards the horizon.37
6.4.1 Test method.37
6.4.1.1 Maximum e.i.r.p. towards the horizon .37
6.4.1.2 Maximum e.i.r.p. spectral density towards the horizon.37
6.5 Off-axis e.i.r.p. emission density within the band .37
6.5.1 Test method.38
6.5.1.1 General.38
6.5.1.2 Transmit output power density.38
6.5.1.2.1 General.38
6.5.1.2.2 Test site.38
ETSI

---------------------- Page: 6 ----------------------

SIST EN 302 340 V1.1.1:2006
 5 ETSI EN 302 340 V1.1.1 (2006-04)
6.5.1.2.3 Method of measurement.38
6.5.1.3 Antenna transmit gain.39
6.5.1.3.1 General.39
6.5.1.3.2 Test site.40
6.5.1.3.3 Method of measurement.40
6.5.1.4 Antenna transmit radiation patterns .41
6.5.1.4.1 General.41
6.5.1.4.2 Test site.41
6.5.1.4.3 Test arrangement.41
6.5.1.4.4 Co-polar radiation pattern-azimuth.41
6.5.1.4.5 Co-polar radiation pattern-elevation.42
6.5.1.4.6 Cross-polar radiation pattern-azimuth .42
6.5.1.4.7 Cross-polar radiation pattern-elevation .43
6.5.2 Computation of results.44
6.6 Carrier suppression.44
6.6.1 Test method.44
6.7 Antenna pointing for ESV.44
6.7.1 General.44
6.7.2 Test method.45
6.8 Antenna mechanical stability.46
6.8.1 Test method.46
6.9 Polarization angle alignment capability .46
6.9.1 Test method.46
6.10 Cessation of emissions of the ESV.46
6.10.1 Test arrangement.46
6.10.2 Test Method.47
6.10.2.1 Required documentation.47
6.10.2.2 Cessation of emissions from the "Transmission enabled" state .47
6.10.2.3 Cessation of emission from the "Transmission disabled" state.48
6.10.2.4 Cessation of emission from the "Initial Phase" state.48
6.10.2.4.1 EUTs transmitting initial bursts.48
6.10.2.4.2 EUTs not transmitting initial bursts.48
6.10.2.5 "Single action" means of cessation of emissions.49
6.10.2.6 Fault conditions.49
6.11 Identification of ESV.50
6.11.1 Test arrangement.50
6.11.2 Test method.50
6.12 Control and monitoring functions .50
6.12.1 Test arrangement.50
6.12.2 Processor monitoring- Test method .50
6.12.3 Transmit subsystem monitoring-Test method.51
6.12.4 Power-on/Reset-Test method.51
6.12.5 Control Channel and Response Channel -Test method.51
6.12.6 Network Control commands-Test method.52
6.12.7 Initial burst transmission-Test method.54
Annex A (normative): The EN Requirements table (EN-RT).55
Annex B (normative): Mechanical stability methodology.56
Annex C (informative): Bibliography.58
Annex D (informative): The EN title in the official languages .59
History .61

ETSI

---------------------- Page: 7 ----------------------

SIST EN 302 340 V1.1.1:2006
 6 ETSI EN 302 340 V1.1.1 (2006-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs n
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.