ETSI EN 301 908-7 V2.2.2 (2005-01)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive
REN/ERM-TFES-002-7-C1
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Bazne postaje (BS) in uporabniška oprema (UE) za celična omrežja tretje generacije IMT-2000 - 7. del: Harmonizirani EN za IMT-2000, CDMA TDD (UTRA TDD) (BS), ki zajema bistvene zahteve člena 3.2 direktive R&TTE
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 908-7 Version 2.2.2SIST EN 301 908-7 V2.2.2:2005en01-maj-2005SIST EN 301 908-7 V2.2.2:2005SLOVENSKI
STANDARD
SIST EN 301 908-7 V2.2.2:2005
ETSI EN 301 908-7 V2.2.2 (2005-01)Candidate Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Base Stations (BS), Repeaters and User Equipment (UE) forIMT-2000 Third-Generation cellular networks;Part 7: Harmonized EN for IMT-2000,CDMA TDD (UTRA TDD) (BS)covering essential requirementsof article 3.2 of the R&TTE Directive
SIST EN 301 908-7 V2.2.2:2005
ETSI ETSI EN 301 908-7 V2.2.2 (2005-01) 2
Reference REN/ERM-TFES-002-7-C1 Keywords 3G, 3GPP, cell, digital, IMT-2000, mobile, radio, regulation, TD-CDMA, TDD, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2005. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 301 908-7 V2.2.2:2005
ETSI ETSI EN 301 908-7 V2.2.2 (2005-01) 3
Contents Intellectual Property Rights.6 Foreword.6 Introduction.8 1 Scope.10 2 References.10 3 Definitions, symbols and abbreviations.11 3.1 Definitions.11 3.2 Symbols.12 3.3 Abbreviations.12 4 Technical requirements specifications.13 4.1 Environmental profile.13 4.2 Conformance requirements.13 4.2.1 Introduction.13 4.2.2 Spectrum emission mask.13 4.2.2.1 Definition.13 4.2.2.1.1 3,84 Mcps TDD option.13 4.2.2.1.2 1,28 Mcps TDD option.14 4.2.2.2 Limits.14 4.2.2.2.1 3,84 Mcps TDD option.14 4.2.2.2.2 1,28 Mcps TDD option.15 4.2.2.3 Conformance.16 4.2.3 Transmitter adjacent channel leakage power ratio.16 4.2.3.1 Definition.16 4.2.3.2 Limits.16 4.2.3.2.1 General requirements.16 4.2.3.2.2 Co-existence with UTRA-FDD.17 4.2.3.2.3 Co-existence with unsynchronized UTRA TDD on adjacent channels.18 4.2.3.3 Conformance.18 4.2.4 Transmitter spurious emissions.18 4.2.4.1 Definition.18 4.2.4.2 Limits.19 4.2.4.2.1 General requirements.19 4.2.4.2.2 Co-existence with GSM 900.20 4.2.4.2.3 Co-existence with DCS 1800.21 4.2.4.2.4 Co-existence with UTRA FDD.21 4.2.4.2.5 Co-existence with unsynchronized TDD.21 4.2.4.3 Conformance.21 4.2.5 Base station maximum output power.22 4.2.5.1 Definition.22 4.2.5.2 Limits.22 4.2.5.3 Conformance.22 4.2.6 Transmit intermodulation.22 4.2.6.1 Definition.22 4.2.6.2 Limits.22 4.2.6.2.1 3,84 Mcps TDD option.22 4.2.6.2.2 1,28 Mpcs TDD option.22 4.2.6.3 Conformance.23 4.2.7 Receiver spurious emissions.23 4.2.7.1 Definition.23 4.2.7.2 Limits.23 4.2.7.2.1 3,84 Mcps TDD option.23 4.2.7.2.2 1,28 Mcps TDD option.23 4.2.7.3 Conformance.23 SIST EN 301 908-7 V2.2.2:2005
ETSI ETSI EN 301 908-7 V2.2.2 (2005-01) 4
4.2.8 Receiver blocking characteristics.24 4.2.8.1 Definition.24 4.2.8.2 Limits.24 4.2.8.2.1 3,84 Mcps TDD option.24 4.2.8.2.2 1,28 Mcps TDD option.24 4.2.8.3 Conformance.25 4.2.9 Receiver intermodulation characteristics.25 4.2.9.1 Definition.25 4.2.9.2 Limits.25 4.2.9.2.1 3,84 Mcps TDD option.25 4.2.9.2.2 1,28 Mcps TDD option.26 4.2.9.3 Conformance.26 4.2.10 Receiver adjacent channel selectivity.26 4.2.10.1 Definition.26 4.2.10.2 Limits.26 4.2.10.2.1 3,84 Mcps TDD option.26 4.2.10.2.2 1,28 Mcps TDD option.27 4.2.10.3 Conformance.28 5 Testing for compliance with technical requirements.28 5.1 Conditions for testing.28 5.2 Interpretation of the measurement results.28 5.3 Essential radio test suites.30 5.3.1 Spectrum emission mask.30 5.3.1.1 Method of test.30 5.3.1.1.1 Initial conditions.30 5.3.1.1.2 Procedure.32 5.3.1.2 Test requirements.32 5.3.1.2.1 3,84 Mcps TDD option.32 5.3.1.2.2 1,28 Mcps TDD option.32 5.3.2 Transmitter adjacent channel leakage power ratio.33 5.3.2.1 Method of test.33 5.3.2.1.1 Initial conditions.33 5.3.2.1.2 Procedure.34 5.3.2.2 Test requirements.36 5.3.2.2.1 3,84 Mcps TDD option.36 5.3.2.2.2 1,28 Mcps TDD option.36 5.3.3 Transmitter spurious emissions.36 5.3.3.1 Method of test.36 5.3.3.1.1 Initial conditions.36 5.3.3.1.2 Procedure.38 5.3.3.2 Test requirements.38 5.3.4 Base station maximum output power.38 5.3.4.1 Method of test.38 5.3.4.1.1 Initial conditions.38 5.3.4.1.2 Procedure.39 5.3.4.2 Test requirements.39 5.3.5 Transmit intermodulation.39 5.3.5.1 Method of test.39 5.3.5.1.1 Initial conditions.39 5.3.5.1.2 Procedure.43 5.3.5.2 Test requirements.43 5.3.6 Receiver spurious emissions.44 5.3.6.1 Method of test.44 5.3.6.1.1 Initial conditions.44 5.3.6.1.2 Procedure.45 5.3.6.2 Test requirements.45 5.3.7 Receiver blocking characteristics.46 5.3.7.1 Method of test.46 5.3.7.1.1 Initial conditions.46 5.3.7.1.2 Procedure.46 5.3.7.2 Test requirements.47 SIST EN 301 908-7 V2.2.2:2005
ETSI ETSI EN 301 908-7 V2.2.2 (2005-01) 5
5.3.8 Receiver intermodulation characteristics.47 5.3.8.1 Method of test.47 5.3.8.1.1 Initial conditions.47 5.3.8.1.2 Procedure.47 5.3.8.2 Test requirements.48 5.3.9 Receiver adjacent channel selectivity.48 5.3.9.1 Method of test.48 5.3.9.1.1 Initial conditions.48 5.3.9.1.2 Procedure.49 5.3.9.1.3 Test requirements.49 Annex A (normative): EN Requirements Table (EN-RT).50 Annex B (normative): BS configurations.51 B.1 Receiver Diversity.51 B.2 Power Supply options.51 B.3 Ancillary RF amplifiers.51 B.4 BS using antenna arrays.51 B.4.1 Receiver tests.52 B.4.2 Transmitter tests.52 Annex C (informative): Environmental profile specification.53 Annex D (informative): Bibliography.54 Annex E (informative): The EN title in the official languages.55 History.57
SIST EN 301 908-7 V2.2.2:2005
ETSI ETSI EN 301 908-7 V2.2.2 (2005-01) 6
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). The present document is part 7 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below: Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive"; Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS and Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 10: "Harmonized EN for IMT-2000 FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive". SIST EN 301 908-7 V2.2.2:2005
ETSI ETSI EN 301 908-7 V2.2.2 (2005-01) 7
Technical specifications relevant to Directive 1999/5/EC [1] are given in annex A in the present document and annex A of EN 301 908-1 [9].
National transposition dates Date of latest announcement of this EN (doa): 30 April 2005 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 October 2005 Date of withdrawal of any conflicting National Standard (dow): 30 April 2006
SIST EN 301 908-7 V2.2.2:2005
ETSI ETSI EN 301 908-7 V2.2.2 (2005-01) 8
Introduction The present document is part of a set of standards designed to fit in a modular structure to cover all radio and telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure. The modular structure is shown in figure 1.
- If needed, new standards for human exposure to
Electromagnetic Fields, - if needed, new standards for acoustic safety Use of spectrum * If needed scoped by equipment class or typeScoped by frequency and/or equipment typeDisability*Privacy* Fraud* No harm to the network* Emergency*Interworking via
the network* Interorking with the network Non-radioRadio (RE)Non-TTETTE3.1b3.23.3c3.3b3.3a3.3d3.3e3.3fRadio Product EMCEN 301 489 multi-part EMC standard Generic and product standards also notified under EMC DirectiveStandards also notified under LV Directive3.1aNew radio harmonized standards SpectrumEMCSafety
Figure 1: Modular structure for the various standards used under the R&TTE Directive SIST EN 301 908-7 V2.2.2:2005
ETSI ETSI EN 301 908-7 V2.2.2 (2005-01) 9
The left hand edge of figure 1 shows the different clauses of article 3 of the R&TTE Directive [1]. For article 3.3 various horizontal boxes are shown. Dotted lines indicate that at the time of publication of the present document essential requirements in these areas have to be adopted by the Commission. If such essential requirements are adopted, and as far and as long as they are applicable, they will justify individual
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.