IEC 61784-3-18:2011/AMD2:2021

Amendment 2 - Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional specifications for CPF 18

Amendement 2 - Réseaux de communication industriels - Profils - Partie 3-18: Bus de terrain de sécurité fonctionnelle - Spécifications supplémentaires pour CPF 18

General Information

• Status: Withdrawn
• Publication Date: 29-Apr-2021
• Withdrawal Date: 30-Mar-2023
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: SC 65C - Industrial networks
• Drafting Committee: WG 12 - TC 65/SC 65C/WG 12
• Current Stage: WPUB - Publication withdrawn
• Completion Date: 31-Mar-2023

Relations

• Amends: IEC 61784-3-18:2011 - Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional specifications for CPF 18
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61784-3-18 ®
Edition 1.0 2021-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 2
AM ENDEMENT 2
Industrial communication networks – Profiles –
Part 3-18: Functional safety fieldbuses – Additional specifications for CPF 18
Réseaux de communication industriels – Profils –
Partie 3-18: Bus de terrain de sécurité fonctionnelle – Spécifications
supplémentaires pour CPF 18
IEC 61784-3-18:2011-04/AMD2:2021-04(en-fr)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 61784-3-18 ®
Edition 1.0 2021-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 2
AM ENDEMENT 2
Industrial communication networks – Profiles –
Part 3-18: Functional safety fieldbuses – Additional specifications for CPF 18
Réseaux de communication industriels – Profils –
Partie 3-18: Bus de terrain de sécurité fonctionnelle – Spécifications
supplémentaires pour CPF 18
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05 ISBN 978-2-8322-9757-5
– 2 – IEC 61784-3-18:2011/AMD2:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
PROFILES –
Part 3-18: Functional safety fieldbuses –
Additional specifications for CPF 18

AMENDMENT 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 2 to IEC 61784-3-18:2011 has been prepared by subcommittee 65C: Industrial
networks, of IEC technical committee 65: Industrial-process measurement, control and
automation.
© IEC 2021
The text of this Amendment is based on the following documents:
FDIS Report on voting
65C/1083/FDIS 65C/1087/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement,
available at www.iec.ch/members_experts/refdocs. The main document types developed by
IEC are described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts of the IEC 61784-3 series, published under the general title Industrial
communication networks – Profiles – Functional safety fieldbuses, can be found on the IEC
website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates that it
colours which are considered to be useful for the correct understanding of its
contains
contents. Users should therefore print this document using a colour printer.

_____________
INTRODUCTION to Amendment 2
This Amendment 2 introduces several editorial and informational corrections in the context of
Edition 4 of IEC 61784-3.
– 4 – IEC 61784-3-18:2011/AMD2:2021
© IEC 2021
0 Introduction
0.1 General
Replace the existing Figure 1 by the following new figure:

Replace the existing text of the NOTE below Figure 1 (before the title) by the following:
IEC 62061 specifies the relationship between PL (Category) and SIL.

© IEC 2021
Replace the existing Figure 2 by the following new figure:

Replace, below Figure 2, the existing text of figure footnote a by the following:
For specified electromagnetic environments; otherwise IEC 61326-3-1 or IEC 61000-6-7.
Delete, below Figure 2, figure footnote b.
5 General
5.1 External documents providing specifications for the profile
Replace the existing text by the following:
There is no additional external document used for FSCP 18/1.
7 Safety communication layer protocol
7.1.2.4 Safety data
Delete, at the end of second paragraph: "as proven in 9.5.2".
7.1.2.7 SPDO CRC
Replace, in second paragraph: "0x20044009" with "0x120044009".

– 6 – IEC 61784-3-18:2011/AMD2:2021
© IEC 2021
Replace, at the end of second paragraph: "9.5.2" with "Clause A.1".
7.1.3.8 SHB CRC
Replace, in second paragraph: "0x20044009" with "0x120044009".
Replace, at the end of second paragraph: "9.5.2" with "Clause A.1".
9 System requirements
9.5 Constraints for calculation of system characteristics
Delete Subclause 9.5.2.
Annex A – Additional information for functional safety communication profiles
of CPF 18
Delete the sentence: "There is no additional information for this FSCP. "
Add the following new Clauses A.1 and A.2.
A.1 Hash function calculation
The 32-bit CRC used in this FSCP is 0x120044009. It is calculated by:
G(x) = x32 + x29 + x18 + x14 + x3 + 1
Table A.1 contains the residual error probabilities for the used 32-bit polynomial for different
code length and bit error probabilities in the range of 120 bits up to data lengths of 1 024 bits
(128 octets) as specified in 9.5.1.4 including the CRC signature and incorporating the overall
safety PDU structure as described in 7.1.
Table A.1 – Residual error probabilities for CRC32 Polynomial 0x120044009
Length P = 0,000 1 P = 0,001 P = 0,01 P = 2/n P = 4/n P = 8/n
BER BER BER BER BER BER
n (bits)
(2/n < 0,01) (4/n < 0,01) (8/n < 0,01)
120 1,4236765E-22 1,2847875E-16 4,5824514E-11 - - -
128 1,5805978E-22 1,4161637E-16 4,6991099E-11 - - -
136 1,8162338E-22 1,6156082E-16 4,9874896E-11 - - -
144 2,0514920E-22 1,8117854E-16 5,2040784E-11 - - -
152 2,2863728E-22 2,0047350E-16 5,3582492E-11 - - -
160 2,5208766E-22 2,1944972E-16 5,4586144E-11 - - -
168 2,7550040E-22 2,3811128E-16 5,5130780E-11 - - -
176 2,9887554E-22 2,5646232E-16 5,5287180E-11 - - -
184 3,2221313E-22 2,7450668E-16 5,5112762E-11 - - -
192 3,4551322E-22 2,9224828E-16 5,4660017E-11 - - -
200 3,6877585E-22 3,0969120E-16 5,3978908E-11 - - -
208 3,9200108E-22 3,2683958E-16 5,3114126E-11 4,5363410E-11 - -
216 4,1518896E-22 3,4369773E-16 5,2107322E-11 3,8340651E-11 - -

© IEC 2021
Length P = 0,000 1 P = 0,001 P = 0,01 P = 2/n P = 4/n P = 8/n
BER BER BER BER BER BER
n (bits)
(2/n < 0,01) (4/n < 0,01) (8/n < 0,01)
224 4,3833955E-22 3,6026990E-16 5,0993464E-11 3,2582177E
...