IEC PAS 61076-3-116:2005

Connectors for electronic equipment - Part 3-116: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Bayonet coupling with spring clamp

Covers protective housings for upgrading existing 8-way shielded and unshielded connectors utilizing the interface described in IEC 60603-7-2, IEC 60603-7-3, IEC 60603-7-4, IEC 60603-7-5, and IEC 60603-7-7 to IP65 and IP67 ratings, according to IEC 60529, for use in industrial environments. The housings cover a variety of different locking and a variety of different mounting configurations and termination types.

General Information

• Status: Replaced
• Publication Date: 27-Nov-2005
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: SC 48B - Electrical connectors
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 09-Sep-2008

Relations

• Replaced By: IEC 61076-3-116:2008 - Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever
• Effective Date: 05-Sep-2023

Standards Content (Sample)

PUBLICLY
IEC
AVAILABLE
PAS 61076-3-116
SPECIFICATION
First edition
Pre-Standard
2005-11
Connectors for electronic equipment –

Part 3-116:
Rectangular connectors – Protective housings
for use with 8-way shielded and unshielded
connectors for frequencies up to 600 MHz
for industrial environments incorporating
the IEC 60603-7 series interface –
Variant 13 related to IEC 61076-3-106 –
Bayonet coupling with spring clamp

Reference number
IEC/PAS 61076-3-116:2005(E)
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the

60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.

Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,

edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the

base publication incorporating amendment 1 and the base publication incorporating

amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:

Email: [e-mail]
Tel: [phone]
Fax: [phone]
PUBLICLY
IEC
AVAILABLE
PAS 61076-3-116
SPECIFICATION
First edition
Pre-Standard
2005-11
Connectors for electronic equipment –

Part 3-116:
Rectangular connectors – Protective housings
for use with 8-way shielded and unshielded
connectors for frequencies up to 600 MHz
for industrial environments incorporating
the IEC 60603-7 series interface –
Variant 13 related to IEC 61076-3-106 –
Bayonet coupling with spring clamp

 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
S
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue

– 2 – PAS 61076-3-116 © IEC:2005(E)

CONTENTS
FOREWORD.4

1 General data .6

1.1 Scope.6

1.2 Normative references .6

1.3 IEC type designation.7

2 Terms and definitions .9
3 Dimensional information .9
3.1 Common features .9
3.2 General .9
3.3 Contact arrangement of all connector types.9
3.4 IP65 and IP67 sealing.9
3.5 Industrial IEC 60603-7 variant 13 – Bayonet coupling .9
3.5.1 Industrial IEC 60603-7 variant 13, fixed connectors .9
3.6 Industrial IEC 60603-7 variant 13, free connectors .11
3.7 Termination and mounting information.11
3.8 General .11
3.9 Mounting information for variant 13, fixed connector.12
4 Gauges .12
4.1 Connectors, IEC 60603-7 interface .12
5 Characteristics .12
5.1 Climatic category.12
5.2 Electrical .13
5.2.1 Clearance and creepage distances.13
5.2.2 Voltage proof .13
5.2.3 Current-carrying capacity .14
5.2.4 Mating cycles with power applied .14
5.2.5 Initial contact resistance.14
5.2.6 Input-to-output resistance.14
5.2.7 Resistance unbalance .14
5.2.8 Initial insulation resistance .15

5.3 Transmission characteristics.15
5.3.1 General .15
5.3.2 Mechanical .15
5.3.3 Mechanical operation .15
5.3.4 Effectiveness of connector coupling devices transversal .15
5.3.5 Effectiveness of connector coupling devices .15
5.3.6 Separation and engagement forces .15
6 Test schedule.15
6.1 General .15
6.2 Test Procedures and measuring methods.16
6.3 Preconditioning.16
6.4 Wiring and mounting of specimens.16
6.4.1 Wiring.16
6.4.2 Mounting.16

PAS 61076-3-116 © IEC:2005(E) – 3 –

6.5 Arrangement for contact resistance test: .16

6.6 Arrangement for dynamic stress tests (test phase AP2) .16

6.7 Basic (minimum) test schedule.16

6.8 Full test schedule .17

6.8.1 Test preliminary group P .17

6.8.2 Test group P .18

6.8.3 Test group AP.19

6.8.4 Test group BP.20

6.8.5 Test group CP.21

6.8.6 Test group DP.21

6.8.7 Test group EP.21

– 4 – PAS 61076-3-116 © IEC:2005(E)

INTERNATIONAL ELECTROTECHNICAL COMMISSION

_________________
CONNECTORS FOR ELECTRONIC EQUIPMENT –

Part 3-116: Rectangular connectors – Protective housings for use

with 8-way shielded and unshielded connectors

for frequencies up to 600 MHz for industrial environments

incorporating the IEC 60603-7 series interface – Variant 13 related to

IEC 61076-3-106 – Bayonet coupling with spring clamp

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.

The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance
with this document may involve the use of a patent concerning Amphenol .
The holder of this patent right has assured the IEC that he is willing to negotiate licences under reasonable and
non-discrimnatory terms and conditions with applicants throughout the world. In this respect, the statement of the
holder of this patent right is registered with IEC. Information may be obtained from:
Amphenol Socapex S.A.S.
948 Promenade de l’Arve
B.P. 29
74311 Thyez Cedex, France
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights
other than those identified above. IEC shall not be held responsible for identifying any or all such patent rights.

—————————
Amphenol is the trade name of Amphenol Socapex S.A.S. This information is given for the information of users of
this PAS and does not constitute an endorsement by IEC of the trademark holder or any of its products.
Compliance to this profile does not require use of the trade name Amphenol. Use of the trade name Amphenol
requires permission from Amphenol Socapex S.A.S.

PAS 61076-3-116 © IEC:2005(E) – 5 –

A
...