IEC 61811-53:2002
(Main)Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9 mm base
Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9 mm base
IEC 61811-53:2002 Is a blank detail specification applicable to electromechanical all-or-nothing telecom relays of assessed quality. Selects the appropriate methods of test to be used in detail specifications and contains basic test schedules to be used in the preparation of such specifications.
Relais électromécaniques de tout-ou-rien - Partie 53: Spécification particulière cadre - Relais électromécaniques de tout-ou-rien télécom sous assurance de la qualité - Deux contacts à deux directions, surface d'encombrement de 14 mm x 9 mm
La CEI 61811-53:2002 est une spécification particulière cadre applicable aux relais électromécaniques de tout-ou-rien télécom sous assurance de la qualité. Les relais conformes à la présente norme sont mis en oeuvre dans des applications de télécommunication. Cependant, en tant que relais sur circuits imprimés, ils conviennent également pour d'autres types d'applications, par exemple industrielles. La présente norme sélectionne dans la CEI 61810-7 et dans d'autres documents, les méthodes d'essais appropriées à utiliser dans les spécifications particulières dérivées de la présente spécification et contient les programmes d'essais de base à utiliser lors de la préparation de telles spécifications conformément à la CEI 61811-1. Cette deuxième édition de la CEI 61811-53 annule et remplace la première édition parue en 1997 dont elle constitue une révision technique.
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL IEC
STANDARD
61811-53
QC 160503
Second edition
2002-03
Electromechanical all-or-nothing relays –
Part 53:
Blank detail specification –
Electromechanical all-or-nothing telecom
relays of assessed quality –
Two change-over contacts,
14 mm ×××× 9 mm base
Relais électromécaniques de tout-ou-rien –
Partie 53:
Spécification particulière cadre –
Relais électromécaniques de tout-ou-rien télécom
soumis au régime d'assurance de la qualité –
Deux contacts à deux directions,
surface d'encombrement de 14 mm × 9 mm
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/catlg-e.htm) enables
you to search by a variety of criteria including text searches, technical
committees and date of publication. On-line information is also available on
recently issued publications, withdrawn and replaced publications, as well as
corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/JP.htm) is also
available by email. Please contact the Customer Service Centre (see below) for
further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: custserv@iec.ch
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00
INTERNATIONAL IEC
STANDARD
61811-53
QC 160503
Second edition
2002-03
Electromechanical all-or-nothing relays –
Part 53:
Blank detail specification –
Electromechanical all-or-nothing telecom
relays of assessed quality –
Two change-over contacts,
14 mm ×××× 9 mm base
Relais électromécaniques de tout-ou-rien –
Partie 53:
Spécification particulière cadre –
Relais électromécaniques de tout-ou-rien télécom
soumis au régime d'assurance de la qualité –
Deux contacts à deux directions,
surface d'encombrement de 14 mm × 9 mm
IEC 2002 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
U
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue
– 2 – 61811-53 IEC:2002(E)
CONTENTS
FOREWORD.3
1 General .5
1.1 Scope.5
1.2 Normative references .5
1.3 Front page of the detail specification .7
2 Characteristic values of the relay.9
2.1 General data .9
2.2 Construction of IECQ type designation (ordering information).9
2.3 Coil data.10
2.4 Contact data.10
2.4.1 Electrical endurance and switching frequency.10
2.4.2 Static contact-circuit resistance .10
2.4.3 Mechanical endurance.10
2.4.4 Timing (without suppression device) .11
2.5 Mounting .11
2.6 Environmental data .11
2.7 Package of relays for automatic handling (if applicable) .11
3 Qualification approval procedures .12
4 Quality conformance inspection.12
4.1 Formation of inspection lots.12
4.2 Intervals between tests.12
5 Marking and documentation.12
5.1 Marking of the relay.12
5.2 Marking of the package .13
5.3 Documentation .13
6 Annexes .13
7 Tests .13
7.1 Standard conditions for testing .13
7.2 Mounting of test specimens during the test.13
7.3 General conditions for testing.13
8 Ordering information.13
9 Relay reliability – Failure rate data (optional).13
Table 1 – Dielectric test voltages .9
Table 2 – Coil data .10
Table 3 – Loads, contact-circuit resistance limits, switching cycles and frequencies
for electrical endurance and overload tests .10
Table 4 – Quality conformance inspection.14-27
Table 5 – Qualification approval.28-30
Table 6 – Industrial qualification .30
61811-53 IEC:2002(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTROMECHANICAL ALL-OR-NOTHING RELAYS –
Part 53: Blank detail specification –
Electromechanical all-or-nothing telecom relays of assessed quality –
Two change-over contacts, 14 mm ×××× 9 mm base
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61811-53 has been prepared by IEC technical committee 94:
All-or-nothing electrical relays.
This second edition of IEC 61811-53 cancels and replaces the first edition published in 1997
and constitutes a technical revision.
The text of this standard is based on the following documents:
FDIS Report on voting
94/147/FDIS 94/161/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
The QC number that appears on the front cover of this publication is the specification number
in the IEC Quality Assessment System for Electronic Components (IECQ).
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
– 4 – 61811-53 IEC:2002(E)
The committee has decided that the contents of this publication will remain unchanged until 2007.
At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
61811-53 IEC:2002(E) – 5 –
ELECTROMECHANICAL ALL-OR-NOTHING RELAYS –
Part 53: Blank detail specification –
Electromechanical all-or-nothing telecom relays of assessed quality –
Two change-over contacts, 14 mm ×××× 9 mm base
1 General
1.1 Scope
This part of IEC 61811 is a blank detail specification applicable to electromechanical all-
or-nothing telecom relays of assessed quality. Relays according to this standard are
provided for operation in telecommunication applications. However, as electromechanical all-
or-nothing relays, they are also suitable for particular industrial and other applications.
This standard selects from IEC 61810-7 and other sources the appropriate methods of test to be
used in detail specifications derived from this specification, and contains basic test schedules to
be used in the preparation of such specifications in accordance with IEC 61811-1.
1.2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60068-1:1988, Environmental testing – Part 1: General and guidance
Amendment 1 (1992)
IEC 60068-2-17:1994, Environmental testing – Part 2: Tests: Test Q – Sealing
IEC 60068-2-20:1979, Environmental testing – Part 2: Tests: Test T – Soldering
Amendment 2 (1987)
IEC 60068-2-47:1999, Environmental testing – Part 2-47: Test methods – Mounting of
components, equipment and other articles for vibration, impact and similar dynamic tests
IEC 60255-14:1981, Electrical relays – Part 14: Endurance test for electrical relay contacts –
Preferred values for contact loads
IEC 60695-2-2:1991, Fire hazard testing – Part 2: Test methods – Section 2 – Needle-flame test
IEC 61709:1996, Electronic components – Reliability – Reference conditions for failure rates
and stress models for conversion
IEC 61810-7:1997, Electromechanical all-or-nothing relays – Part 7: Test and measurement
procedures
– 6 – 61811-53 IEC:2002(E)
IEC 61811-1:1999, Electromechanical non-specified time all-or-nothing relays of assessed
quality – Part 1: Generic specification
IEC 61811-50:2002, Electromechanical all-or-nothing relays – Part 50: Sectional specification –
Electromechanical all-or-nothing telecom relays of assessed quality
QC 001002-2:1998, Rules of Procedure of the IEC Quality Assessment System for Electronic
Components (IECQ) – Part 2: Documentation
QC 001002-3:1998, Rules of Procedure of the IEC Quality Assessment System for Electronic
Components (IECQ) – Part 3: Approval procedures
QC 001005:1996, Register of Firms, Products and Services approved under the IECQ
System, including ISO 9000
CECC 00802:1990, Guidance document: CECC Standard Method for the Specification of
Surface Mounting Components (SMDs) of Assessed Quality
(National authorized institutions will complete this clause
...
IEC 61811-53 ®
Edition 2.0 2002-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electromechanical all-or-nothing relays –
Part 53: Blank detail specification – Electromechanical all-or-nothing telecom
relays of assessed quality – Two change-over contacts, 14 mm × 9 mm base
Relais électromécaniques de tout-ou-rien –
Partie 53: Spécification particulière cadre – Relais électromécaniques de tout-
ou-rien télécom sous assurance de la qualité – Deux contacts à deux directions,
surface d’encombrement de 14 mm × 9 mm
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC Plus de 55 000 entrées terminologiques électrotechniques, en
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des
CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 61811-53 ®
Edition 2.0 2002-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electromechanical all-or-nothing relays –
Part 53: Blank detail specification – Electromechanical all-or-nothing telecom
relays of assessed quality – Two change-over contacts, 14 mm × 9 mm base
Relais électromécaniques de tout-ou-rien –
Partie 53: Spécification particulière cadre – Relais électromécaniques de tout-
ou-rien télécom sous assurance de la qualité – Deux contacts à deux directions,
surface d’encombrement de 14 mm × 9 mm
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX U
ICS 29.120.70 ISBN 978-2-8322-1550-0
– 2 – IEC 61811-53:2002 © IEC 2002
CONTENTS
FOREWORD . 3
1 General . 5
1.1 Scope . 5
1.2 Normative references . 5
1.3 Front page of the detail specification . 7
2 Characteristic values of the relay . 9
2.1 General data . 9
2.2 Construction of IECQ type designation (ordering information) . 9
2.3 Coil data. 10
2.4 Contact data . 10
2.4.1 Electrical endurance and switching frequency . 10
2.4.2 Static contact-circuit resistance . 10
2.4.3 Mechanical endurance . 10
2.4.4 Timing (without suppression device) . 11
2.5 Mounting . 11
2.6 Environmental data . 11
2.7 Package of relays for automatic handling (if applicable) . 11
3 Qualification approval procedures . 12
4 Quality conformance inspection . 12
4.1 Formation of inspection lots . 12
4.2 Intervals between tests . 12
5 Marking and documentation . 12
5.1 Marking of the relay . 12
5.2 Marking of the package . 13
5.3 Documentation . 13
6 Annexes . 13
7 Tests . 13
7.1 Standard conditions for testing . 13
7.2 Mounting of test specimens during the test . 13
7.3 General conditions for testing . 13
8 Ordering information . 13
9 Relay reliability – Failure rate data (optional) . 13
Table 1 – Dielectric test voltages . 9
Table 2 – Coil data . 10
Table 3 – Loads, contact-circuit resistance limits, switching cycles and frequencies
for electrical endurance and overload tests . 10
Table 4 – Quality conformance inspection . 14-27
Table 5 – Qualification approval . 28-30
Table 6 – Industrial qualification . 30
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTROMECHANICAL ALL-OR-NOTHING RELAYS –
Part 53: Blank detail specification –
Electromechanical all-or-nothing telecom relays of assessed quality –
Two change-over contacts, 14 mm × 9 mm base
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61811-53 has been prepared by IEC technical committee 94:
All-or-nothing electrical relays.
This bilingual version (2014-04) corresponds to the English version, published in 2002-03.
This second edition of IEC 61811-53 cancels and replaces the first edition published in 1997
and constitutes a technical revision.
The text of this standard is based
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.