IEC 61360-4:2005

Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes

Specifies the definitions of data element types for electric components and materials and the definitions of the component classes. Provides a set of uniquely identified data element types with an unambiguously defined meaning, a defined value format, and a prescribed value domain for non-quantitative data element types.
IEC 61360-4 is now available as a Database Standard IEC 61360-4 DB. An online version of the IEC 61360-4 DB (Common Data Dictionary - CDD) is available on the IEC website: IEC 61360-4 database.

General Information

• Status: Withdrawn
• Publication Date: 01-Mar-2005
• Withdrawal Date: 18-Nov-2016
• ICS: 31.020 - Electronic components in general
• Technical Committee: SC 3D - Classes, Properties and Identification of products - Common Data Dictionary (CDD)
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 19-Nov-2016

Relations

• Revises: IEC 61360-4:1997 - Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types, component classes and terms
• Effective Date: 05-Sep-2023

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD 61360-4
Second edition
2005-03
Standard data element types with associated
classification scheme for electric components –
Part 4:
IEC reference collection of standard data
element types and component classes

Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:

Email: [e-mail]
Tel: [phone]
Fax: [phone]
INTERNATIONAL IEC
STANDARD 61360-4
Second edition
2005-03
Standard data element types with associated
classification scheme for electric components –
Part 4:
IEC reference collection of standard data
element types and component classes

© IEC 2005 – Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
XH
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue

– 2 – 61360-4 © IEC:2005(E)
CONTENTS
Clause Page
FOREWORD.3
1 General .9
1.1 Scope and object.9
1.2 Normative references .9
2 Terms and definitions .10
3 Maintenance and validation methodology .11
4 How to read the annexes .11
4.1 Classification tree.11
4.2 Classes .11
4.3 Data element types.13
4.4 Drawings .15
4.5 Figures.16
4.6 Index on keywords.16

Annex A (normative) Classification scheme .17
Annex B (normative) Class definitions .35
Annex C (normative) Data element type definitions.103
Annex D (normative) Drawings.293
D.1 Drawing definitions .293
D.2 Drawings .298
Annex E (normative) Figures.349
E.1 Figure definitions.349
E.2 Figures.350
Annex F Index on keywords from the preferred name of Data element types and
Condition data element types.356
Annex G (informative) Outlines .386
G.1 Outline style .386
G.2 Terminal position .388
G.3 Terminal form .389
G.4 Terminal variants.390
G.5 Body variants .391

61360-4 © IEC:2005(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
STANDARD DATA ELEMENT TYPES WITH ASSOCIATED
CLASSIFICATION SCHEME FOR ELECTRIC COMPONENTS –

Part 4: IEC reference collection of standard data element types
and component classes
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61360-4 has been prepared by subcommittee 3D: Data sets for
libraries of IEC technical committee 3: Information structures, documentation and graphical
symbols.
This second edition cancels and replaces the first edition published in 1997. This second
edition contains all data element type and class definitions from the first edition with an
updated classification scheme and new definitions in the area of:
a) the geometrical characteristics of the shapes of components, including figures and
drawings;
b) the characteristics for semiconductor die;
c) data element types originating from the JEITA dictionary in Japan.
It establishes a classification and coding system of shapes for package outlines of electric
and electromechanical components according to key geometrical characteristics.

– 4 – 61360-4  IEC:2005(E)
The object of this addition to the standard is to define the information required on the shapes
of components :
• for the design of component lands, footprints and piercing drawings;
• for determining the space occupied;
• for deriving dimensions and tolerances needed for automatic handling by inserters and
onserters;
• to provide a classification scheme for the purposes of retrieval, selection and comparison
of component shapes;
• to establish a coding system for identification of component package outlines;
• to provide a set of reference drawings for defining shape, size and relative position of the
component body, mounting features, terminals and adjusters;
• to provide a set of data element type definitions for geometrical parameters in computer-
sensible form.
This second edition extends the classification scheme and DET definitions with unpackaged
and minimally packaged semiconductor die, with or without connection structures. It is a data
specification which defines the requirements for
• product identity;
• product data;
• die mechanical information;
• test, quality and reliability information;
• handling, storage and mounting information;
• thermal data and electrical simulation data.
This second edition extends the classification and DET definitions with new entries originating
from the JEITA dictionary, Japan.
The text of this standard is based on the following documents:
FDIS Report on voting
3D/134/FDIS 3D/136/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
IEC 61360 consists of the following parts, under the general title Standard data element types
with associated classification scheme for electric components:
• Part 1: Definitions – Principles and methods
• Part 2: EXPRESS Dictionary schema
• Part 3: Maintenance and validation procedures
• Part 4: IEC reference collection of standard data element types and component classes
• Part 5  Extensions to the EXPRESS dictionary schema

61360-4 © IEC:2005(E) – 5 –
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

– 6 – 61360-4 © IEC:2005(E)
INTRODUCTION
The contents of this docment is in line with the current contents of the IEC online 61360
Component Data Dictionary.
a) The complete classification scheme is given in Annex A.
b) The new/amended data element types with their identifier, as listed below, are given in
Annex C.
AAD001-001 AAD089-001 AAE000-001 AAG026-001 AAG074-001
AAD002-001 AAG027-001
AAD090-001 AAE002-006 AAG075-001
AAD003-001 AAD091-001 AAE003-006 AAG028-001 AAG076-001
AAD004-001 AAG029-001
AAD093-001 AAE004-007 AAG077-001
AAD005-001 AAD095-001 AAE060-006 AAG030-001 AAG078-001
AAD006-001 AAG031-001
AAD115-001 AAE349-006 AAG079-001
AAD007-001 AAD116-001 AAE351-006 AAG032-001 AAG080-001
AAD008-001 AAG033-001
AAD117-001 AAE545-006 AAG081-001
AAD009-001 AAD118-001 AAE618-005 AAG034-001 AAG082-001
AAD010-001 AAG035-001
AAD119-001 AAE635-001 AAG083-001
AAD011-001 AAD120-001 AAE878-005 AAG036-001 AAG084-001
AAD012-001 AAG037-001
AAD121-001 AAG085-001
AAD013-001 AAD122-001 AAF101-006 AAG038-001 AAG086-001
AAD014-001 AAG03
...