ISO 10303-214:2001

Industrial automation systems and integration — Product data representation and exchange — Part 214: Application protocol: Core data for automotive mechanical design processes

Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 214: Protocole d'application: Données de base pour la construction automobile

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2001
• Withdrawal Date: 28-Feb-2001
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: ISO/TC 184/SC 4 - Industrial data
• Drafting Committee: ISO/TC 184/SC 4/WG 3 - Oil, Gas, Process and Power
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 09-Dec-2003

Relations

• Revised: ISO 10303-214:2003 - Industrial automation systems and integration — Product data representation and exchange — Part 214: Application protocol: Core data for automotive mechanical design processes
• Effective Date: 15-Apr-2008

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 10303-214
First edition
2001-02-15
Industrial automation systems and
integration — Product data representation
and exchange —
Part 214:
Application protocol: Core data for
automotive mechanical design processes
Systèmes d'automatisation industrielle et intégration — Représentation et
échange de données de produits —
Partie 214: Protocole d'application: Données de base pour la construction
automobile
Reference number
ISO 10303-214:2001(E)
©
ISO 2001

---------------------- Page: 1 ----------------------
ISO 10303-214:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2001 — All rights reserved

---------------------- Page: 2 ----------------------
ISO 10303-214:2001(E)
Contents Page
1 Scope . . . . . . . . . 1
2 Normativereferences . . . . . . . . 3
3 Terms,definitions,abbreviations,andsymbols . . . . . 7
3.1 Terms defined in ISO 10303–1 . . . . . . 7
3.2 Terms defined in ISO 10303–31 . . . . . . . . 8
3.3 Terms defined in ISO 10303–42 . . . . . . . . 8
3.4 Terms defined in ISO 10303–44 . . . . . . . . 10
3.5 Terms defined in ISO 10303–45 . . . . . . . . 10
3.6 Terms defined in ISO 10303–46 . . . . . . . . 10
3.7 Terms defined in ISO 10303–47 . . . . . . . . 10
3.8 Terms defined in ISO 10303–105 . . . . . . . 11
3.9 Terms defined in ISO 10303–202 . . . . . . . 11
3.10 Terms defined in ISO 13584–42 . . . . . . . . 11
3.11 Othertermsanddefinitions . . . . . . 12
3.12 Symbolsandabbreviations . . . . . . 12
4 Informationrequirements . . . . . . . 15
4.1 Units of functionality . . . . . . . . . 15
4.1.1 surface_condition (C1) . . . . . . 17
4.1.2 explicit_draughting(D1) . . . . . . 18
4.1.3 associative_annotation (D2) . . . . . . . 19
4.1.4 external_reference_mechanism(E1) . . . . . 19
4.1.5 user_defined_feature(FF1) . . . . . . . 22
4.1.6 included_feature(FF2) . . . . . . 22
4.1.7 generative_featured_shape(FF3) . . . . . 29
4.1.8 wireframe_model_2d(G1) . . . . . . 30
4.1.9 wireframe_model_3d(G2) . . . . . . 31
4.1.10 connected_surface_model(G3) . . . . . 32
4.1.11 faceted_b_rep_model (G4) . . . . . . . . 34
4.1.12 b_rep_model(G5) . . . . . . . 35
4.1.13 compound_model (G6). . . . . . 37
4.1.14 csg_model(G7) . . . . . . . . 39
4.1.15 geometrically_bounded_surface_model (G8) . . . . 41
4.1.16 kinematics(K1) . . . . . . . . 43
4.1.17 measured_data (MD1) . . . . . . 45
4.1.18 item_property(PR1) . . . . . . 45
4.1.19 geometric_presentation (P1) . . . . . . . 47
4.1.20 annotated_presentation (P2) . . . . . . . 48
4.1.21 shaded_presentation (P3). . . . . . 49
4.1.22 product_management_data (S1) . . . . . 50
4.1.23 element_structure(S2) . . . . . . 52
c ISO 2001 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 10303-214:2001(E)
4.1.24 item_definition_structure (S3) . . . . . . 54
4.1.25 effectivity(S4) . . . . . . . 55
4.1.26 work_management(S5) . . . . . . 56
4.1.27 classification(S6) . . . . . . . 57
4.1.28 specification_control (S7) . . . . . . . . 58
4.1.29 process_plan(S8) . . . . . . . 61
4.1.30 dimension_tolerance (T1) . . . . . . . . 62
4.1.31 geometric_tolerance (T2) . . . . . . . . 64
4.2 Applicationobjects . . . . . . . 65
4.3 Applicationassertions . . . . . . . 519
5 Applicationinterpretedmodel . . . . . . . . 817
5.1 Mappingtable . . . . . . . . 817
5.2 AIMEXPRESSshortlisting . . . . . . 1939
5.2.1 Fundamental concepts and assumptions . . . . . 1956
5.2.2 automotive_designtypes . . . . . . 1983
5.2.3 automotive_design entities . . . . . . . . 2006
5.2.4 automotive_designruledefinitions. . . . . 2242
5.2.5 automotive_designfunctiondefinitions . . . . . 2494
6 Conformancerequirements . . . . . . . 2511
6.1 Conformance Class for component design with 3D shape representation (CC1) . 2512
6.2 ConformanceClassforassemblydesignwith3Dshaperepresentation(CC2) . . 2512
6.3 Conformance Class for component drawings with wireframe or surface shape repre-
sentation(CC3) . . . . . . . . 2514
6.4 Conformance Class for assembly drawings with wireframe, surface or solid shape re-
presentation(CC4) . . . . . . . 2514
6.5 ConformanceClassforstylingdata(CC5) . . . . . 2515
6.6 Conformance Class for product data management without shape representation (CC6) 2516
6.7 Conformance Class for product data management with 3D shape representation (CC7) 2516
6.8 Conformance Class for configuration controlled design without shape representation
(CC8) . . . . . . . . 2517
6.9 Conformance Class for configuration controlled design with 3D shape representation
(CC9) . . . . . . . . 2517
6.10 Conformance Class for configuration controlled design with shape representation and
draughtingdata(CC10). . . . . . . 2518
6.11 Conformance Class for process planning of components (CC11) . . . . . 2519
6.12 Conformance Class for process planning of components with form feature and toler-
ancedata(CC12) . . . . . . . 2519
6.13 Conformance Class for effectivity controlled process planning of assemblies (CC13) . 2520
6.14 ConformanceClassforfeaturebaseddesign(CC14) . . . . 2521
6.15 Conformance Class for feature based design with flexible feature placement (CC15) . 2522
6.16 Conformance Class for kinematic simulations for components and assemblies with 3D
shaperepresentation(CC16) . . . . . . 2523
6.17 ConformanceClassformeasureddata(CC17). . . . . 2523
ivc ISO 2001 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 10303-214:2001(E)
6.18 Conformance Class for configuration controlled process planning of components and
assemblieswith3Dshaperepresentationandkinematicdata(CC18) . . . 2524
6.19 Conformance Class for configuration controlled process planning of components and
assemblies with 3D shape representation including form features and kinematic data
(CC19) . . . . . . . . 2524
6.20 Conformance Class for data storage and retrieval systems (CC20) . . . . 2525
AnnexA(normative) AIMEXPRESSexpandedlisting . . . . 2557
AnnexB(normative) AIMshortnames. . . . . . 3008
Annex C (normative) Implementation method-specific requirements . . . 3043
C.1 Requirements specific to the implementation method defined in ISO 10303–21 . 3043
Annex D (normative) Protocol Implementation Conformance Statement (PICS) proforma . . 3044
D.1 Generalconformancestatements . . . . . . 3046
D.1.1 Protocolimplementationidentification . . . . . 3046
D.1.2 Implementationmethod . . . . . . 3046
D.1.3 Implementedconformanceclasses . . . . . 3046
D.2 ConformancestatementsforUoFC1. . . . . . 3047
D.3 ConformancestatementsforUoFD1 . . . . . 3047
D.4 ConformancestatementsforUoFD2 . . . . . 3047
D.5 ConformancestatementsforUoFE1. . . . . . 3047
D.6 ConformancestatementsforUoFFF1 . . . . . 3048
D.7 ConformancestatementsforUoFFF2 . . . . . 3048
D.8 ConformancestatementsforUoFG1 . . . . . 3049
D.9 ConformancestatementsforUoFG2 . . . . . 3049
D.10 ConformancestatementsforUoFG3 . . . . . 3049
D.11 ConformancestatementsforUoFG4 . . . . . 3049
D.12 ConformancestatementsforUoFG5 . . . . . 3050
D.13 ConformancestatementsforUoFG6 . . . . . 3050
D.14 ConformancestatementsforUoFG7 . . . . . 3050
D.15 ConformancestatementsforUoFG8 . . . . . 3051
D.16 ConformancestatementsforUoFK1 . . . . . 3051
D.17 ConformancestatementsforUoFMD1 . . . . . 3051
D.18 ConformancestatementsforUoFPR1 . . . . . 3052
D.19 ConformancestatementsforUoFP1 . . . . . . 3052
D.20 ConformancestatementsforUoFP2 . . . . . . 3052
D.21 ConformancestatementsforUoFP3 . . . . . . 3052
D.22 ConformancestatementsforUoFS1 . . . . . . 3053
D.23 ConformancestatementsforUoFS2 . . . . . . 3053
D.24 ConformancestatementsforUoFS4 . . . . . . 3054
D.25 ConformancestatementsforUoFS5 . . . . . . 3054
D.26 ConformancestatementsforUoFS6 . . . . . . 3054
D.27 ConformancestatementsforUoFS7 . . . . . . 3055
D.28 ConformancestatementsforUoFS8 . . . . . . 3055
D.29 ConformancestatementsforUoFT1. . . . . . 3055
c ISO 2001 – All rights reserved v

---------------------- Page: 5 ----------------------
ISO 10303-214:2001(E)
D.30 ConformancestatementsforUoFT2. . . . . . 3056
AnnexE(normative) Informationobjectregistration . . . . 3057
E.1 Documentidentification . . . . . . . 3057
E.2 Schemaidentification . . . . . . . 3057
AnnexF(informative) Applicationactivitymodel. . . . . 3062
F.1 Applicationactivitymodeldefinitionsandabbreviations . . . . 3062
F.2 Applicationactivitymodeldiagrams . . . . . . 3068
AnnexG(informative) Applicationreferencemodel. . . . . . 3079
Annex H (informative) AIM EXPRESS-G . . . . . . . 3169
AnnexJ(informative) AIMEXPRESSlisting. . . . . 3307
AnnexK(informative) ARMEXPRESSlisting . . . . . 3309
Bibliography . . . . . . . . . 3310
Index . . . . . . . . . . 3312
Figures
Figure1 Automotivemechanicaldesignprocesses. . . . . . xix
Figure2 Dataplanningmodel . . . . . . . xx
Figure3 Featuresforsolid-typeparts. . . . . . 24
Figure4 Featuresforsheet-typeparts . . . . . . 25
Figure5 InterdependenciesamongUoFs. . . . . . 53
Figure6 UoFS7:ARMstructure. . . . . . 59
Figure 7 Form features in panel defined by target boundaries and wall angles . . 81
Figure8 ParametersdefininganAngle_taper . . . . . 82
Figure 9 Parameters defining an Angular_location_dimension . . . . 84
Figure 10 Angular_location_dimension versus Angular_size_dimension . . . . . 85
Figure 11 Annotation_subfigure for a hole on a technical drawing . . . 87
Figure12 ParametersdefiningaBead_feature. . . . . 102
Figure13 ParametersdefiningaChamfer . . . . . . 110
Figure 14 Parameters defining a Circular_boss . . . . . 113
Figure 15 Definition of a Circular_closed_profile . . . . . . . 114
Figure16 Parametersdefininganoffsetinacircularpattern . . . . 114
Figure17 Parametersdefininganomissioninacircularpattern . . . . 115
Figure18 Circular_patternwithrotationofbasefeature . . . . 118
Figure 19 Definition of a Complete_circular_path . . . . . . . 133
Figure 20 Usage of compound datums. . . . . . 137
Figure 21 Configuration inheritance scheme . . . . . . 146
Figure 22 Parameters defining an edge round with constant radius by offsets . . 148
Figure23 Parametersdefiningafilletwithaconstantradiusbyoffsets . . . 149
vic ISO 2001 – All rights reserved

---------------------- Page: 6 ----------------------
ISO 10303-214:2001(E)
Figure24 Pre-definedcolours . . . . . . . . 155
Figure25 Predefinedcurvefonts. . . . . . . 156
Figure26 Draughtingcalloutsonadrawing . . . . . . 167
Figure27 Datumtargetsonadrawing . . . . . . 168
Figure 28 Definition of a taper by two diameters . . . . . . . 183
Figure 29 Components of a dimension in a drawing . . . . . . 186
Figure30 Predefineddimensionsymbols . . . . . . . 187
Figure 31 Edge transition . . . . . . . 215
Figure32 Fillareastyles . . . . . . . 235
Figure 33 Parameters defining a Flat_slot_end_type . . . . . 238
Figure34 Panelfeaturewiththeshapeofa’stairstep’. . . . . 242
Figure 35 Boundary of a General_boss . . . . . . . . 243
Figure 36 Definition of a General_closed_profile . . . . . . . 248
Figure 37 Definition of a General_open_profile . . . . . 253
Figure 38 Definition of a General_path . . . . . . . . 255
Figure 39 Placement of additional instances in a General_pattern . . . 256
Figure40 Theoreticalwheelbaseofatruck . . . . . . 257
Figure41 General_tolerances . . . . . . . 261
Figure42 Predefinedgeometricaltolerancesymbols . . . . . 271
Figure43 ApplicationofaGeometrical_relationship . . . . . 272
Figure44 Hardness. . . . . . . . 277
Figure45 Crosssectionsofholes . . . . . . 279
Figure 46 Parameters defining a Joggle_feature . . . . . 298
Figure 47 Placement relationships kinematic pair frames and mating links . . . . 306
Figure 48 Definition of a Linear_path . . . . . . 315
Figure49 ParametersdefiningaLocator_feature . . . . . 317
Figure 50 Definition of a Ngon_profile . . . . . . . . 333
Figure 51 Parameters defining a Panel_hole_with_barring . . . . 342
Figure 52 Definition of a Partial_circular_path . . . . . 344
Figure 53 Definition of a Partial_circular_profile . . . . . . . 345
Figure54 Sweeppathforpocketfeatures . . . . . . 363
Figure55 Predefinedpointmarkers . . . . . . 369
Figure 56 Position tolerancing with affected planes . . . . . . 372
Figure 57 Example structure of Product_class objects in a hierarchy . . . 388
Figure58 Shapeofaslotwithradiusedend . . . . . . 414
Figure 59 Rectangular_closed_pocket in a part . . . . . 415
Figure 60 Definition of a Rectangular_closed_profile . . . . . 416
Figure 61 Parameters defining an offset in a rectangular pattern . . . . 418
Figure 62 Parameters defining a Rectangular_pattern . . . . . 421
Figure63 ParametersdefiningaRib_feature . . . . . 429
Figure 64 Right_angular_wedge and its attributes . . . . . . . 430
Figure 65 Definition of a Rounded_u_profile . . . . . 432
Figure 66 Same_time_machining_relationship . . . . . 433
Figure67 Shape_elementonashaft . . . . . . 440
Figure68 variousshapesofslots . . . . . . 446
Figure 69 Definition of a Square_u_profile . . . . . . 460
c ISO 2001 – All rights reserved vii

---------------------- Page: 7 ----------------------
ISO 10303-214:2001(E)
Figure 70 Pre-defined surface condition symbols . . . . . . . 471
Figure 71 Definition of a Tee_profile . . . . . . 481
Figure72 Predefinedterminatorsymbols . . . . . . . 484
Figure73 Textappearanceandrotation . . . . . . 485
Figure74 Screwwiththread . . . . . . . 486
Figure75 Tolerance_zone . . . . . . . 491
Figure 76 Value terminated joggle feature . . . . . . . 502
Figure 77 Definition of a Vee_profile . . . . . . 505
Figure 78 Parameters defining a Woodruff_slot_end_type . . . . 515
Figure 79 example instantiation for specified_higher_usage_occurrence . . . . . 1962
Figure 80 example for usage of product_definition_occurrence_relationship . . . 1964
Figure81 Mainconceptsofspecificationcontrol . . . . . 1972
Figure 82 example instantiation package_product_concept_feature . . . 1973
Figure 83 Use of common_datum . . . . . . 1982
Figure84 Useofviewingplanes . . . . . . . 1982
Figure85 InterdependenciesamongUoFs. . . . . . 2513
Figure F.1 AAM diagram of node A-0: Core data for automotive mechanical design processes 3070
Figure F.2 AAM diagram of node A0: Develop product and tool . . . . 3071
Figure F.3 AAM diagram of node A1: Develop product . . . . 3072
Figure F.4 AAM diagram of node A12: Style product . . . . . 3073
Figure F.5 AAM diagram of node A13: Design product . . . . 3074
Figure F.6 AAM diagram of node A14: Evaluate product . . . . 3075
Figure F.7 AAM diagram of node A2: Develop Tool . . . . . 3076
Figure F.8 AAM diagram of node A22: Design tool . . . . . . 3077
Figure F.9 AAM diagram of node A23: Manufacture production tools . . . 3078
Figure G.1 ARM diagram in EXPRESS_G: 1 of 89 . . . . . . 3080
Figure G.2 ARM diagram in EXPRESS_G: 2 of 89 . . . . . . 3081
Figure G.3 ARM diagram in EXPRESS_G: 3 of 89 . . . . . . 3082
Figure G.4 ARM diagram in EXPRESS_G: 4 of 89 . . . . . . 3083
Figure G.5 ARM diagram in EXPRESS_G: 5 of 89 . . . . . . 3084
Figure G.6 ARM diagram in EXPRESS_G: 6 of 89 . . . . . . 3085
Figure G.7 ARM diagram in EXPRESS_G: 7 of 89 . . . . . . 3086
Figure G.8 ARM diagram in EXPRESS_G: 8 of 89 . . . . . . 3087
Figure G.9 ARM diagram in EXPRESS_G: 9 of 89 . . . . . . 3088
Figure G.10 ARM diagram in EXPRESS_G: 10 of 89 . . . . . . 3089
Figure G.11 ARM diagram in EXPRESS_G: 11 of 89 . . . . . . 3090
Figure G.12 ARM diagram in EXPRESS_G: 12 of 89 . . . . . . 3091
Figure G.13 ARM diagram in EXPRESS_G: 13 of 89 . . . . . . 3092
Figure G.14 ARM diagram in EXPRESS_G: 14 of 89 . . . . . . 3093
Figure G.15 ARM diagram in EXPRESS_G: 15 of 89 . . . . . . 3094
Figure G.16 ARM diagram in EXPRESS_G: 16 of 89 . . . . . . 3095
Figure G.17 ARM diagram in EXPRESS_G: 17 of 89 . . . . . . 3096
Figure G.18 ARM diagram in EXPRESS_G: 18 of 89 . . . . . . 3097
Figure G.19 ARM diagram in EXPRESS_G: 19 of 89 . . . . . . 3098
Figure G.20 ARM diagram in EXPRESS_G: 20 of 89 . . . . . . 3099
Figure G.21 ARM diagram in EXPRESS_G: 21 of 89 . . . . . . 3100
viiic ISO 2001 – All rights reserved

---------------------- Page: 8 ----------------------
ISO 10303-214:2001(E)
Figure G.22 ARM diagram in EXPRESS_G: 22 of 89 . . . . . . 3101
Figure G.23 ARM diagram in EXPRESS_G: 23 of 89 . . . . . . 3102
Figure G.24 ARM diagram in EXPRESS_G: 24 of 89 . . . . . . 3103
Figure G.25 ARM diagram in EXPRESS_G: 25 of 89 . . . . . . 3104
Figure G.26 ARM diagram in EXPRESS_G: 26 of 89 . . . . . . 3105
Figure G.27 ARM diagram in EXPRESS_G: 27 of 89 . . . . . . 3106
Figure G.28 ARM diagram in EXPRESS_G: 28 of 89 . . . . . . 3107
Figure G.29 ARM diagram in EXPRESS_G: 29 of 89 . . . . . . 3108
Figure G.30 ARM diagram in EXPRESS_G: 30 of 89 . . . . . . 3109
Figure G.31 ARM diagram in EXPRESS_G: 31 of 89 . . . . . . 3110
Figure G.32 ARM diagram in EXPRESS_G: 32 of 89 . . . . . . 3111
Figure G.33 ARM diagram in EXPRESS_G: 33 of 89 . . . . . . 3112
Figure G.34 ARM diagram in EXPRESS_G: 34 of 89 . . . . . . 3113
Figure G.35 ARM diagram in EXPRESS_G: 35 of 89 . . . . . . 3114
Figure G.36 ARM diagram in EXPRESS_G: 36 of 89 . . . . . . 3115
Figure G.37 ARM diagram in EXPRESS_G: 37 of 89 . . . . . . 3116
Figure G.38 ARM diagram in EXPRESS_G: 38 of 89 . . . . . . 3117
Figure G.39 ARM diagram in EXPRESS_G: 39 of 89 . . . . . . 3118
Figure G.40 ARM diagram in EXPRESS_G: 40 of 89 . . . . . . 3119
Figure G.41 ARM diagram in EXPRESS_G: 41 of 89 . . . . . . 3120
Figure G.42 ARM diagram in EXPRESS_G: 42 of 89 . . . . . . 3121
Figure G.43 ARM diagram in EXPRESS_G: 43 of 89 . . . . . . 3122
Figure G.44 ARM diagram in EXPRESS_G: 44 of 89 . . . . . . 3123
Figure G.45 ARM diagram in EXPRESS_G: 45 of 89 . . . . . . 3124
Figure G.46 ARM diagram in EXPRESS_G: 46 of 89 . . . . . . 3125
Figure G.47 ARM diagram in EXPRESS_G: 47 of 89 . . . . . . 3126
Figure G.48 ARM diagram in EXPRESS_G: 48 of 89 . . . . . . 3127
Figure G.49 ARM diagram in EXPRESS_G: 49 of 89 . . . . . . 3128
Figure G.50 ARM diagram in EXPRESS_G: 50 of 89 . . . . . . 3129
Figure G.51 ARM diagram in EXPRESS_G: 51 of 89 . . . . . . 3130
Figure G.52 ARM diagram in EXPRESS_G: 52 of 89 . . . . . . 3131
Figure G.53 ARM diagram in EXPRESS_G: 53 of 89 . . . . . . 3132
Figure G.54 ARM diagram in EXPRESS_G: 54 of 89 . . . . . . 3133
Figure G.55 ARM diagram in EXPRESS_G: 55 of 89 . . . . . . 3134
Figure G.56 ARM diagram in EXPRESS_G: 56 of 89 . . . . . . 3135
Figure G.57 ARM diagram in EXPRESS_G: 57 of 89 . . . . . . 3136
Figure G.58 ARM diagram in EXPRESS_G: 58 of 89 . . . . . . 3137
Figure G.59 ARM diagram in EXPRESS_G: 59 of 89 . . . . . . 3138
Figure G.60 ARM diagram in EXPRESS_G: 60 of 89 . . . . . . 3139
Figure G.61 ARM diagram in EXPRESS_G: 61 of 89 . . . . . . 3140
Figure G.62 ARM diagram in EXPRESS_G: 62 of 89 . . . . . . 3141
Figure G.63 ARM diagram in EXPRESS_G: 63 of 89 . . . . . . 3142
Figure G.64 ARM diagram in EXPRESS_G: 64 of 89 . . . . . . 3143
Figure G.65 ARM diagram in EXPRESS_G: 65 of 89 . . . . . . 3144
Figure G.66 ARM diagram in EXPRESS_G: 66 of 89 . . . . . . 3145
Figure G.67 ARM diagram in EXPRESS_G: 67 of 89 . . . . . . 3146
c ISO 2001 – All rights reserved ix

---------------------- Page: 9 ----------------------
ISO 10303-214:2001(E)
Figure G.68 ARM diagram in EXPRESS_G: 68 of 89 . . . . . . 3147
Figure G.69 ARM diagram in EXPRESS_G: 69 of 89 . . . . . . 3148
Figure G.70 ARM diagram in EXPRESS_G: 70 of 89 . . . . . . 3149
Figure G.71 ARM diagram in EXPRESS_G: 71 of 89 . . . . . . 3150
Figure G.72 ARM diagram in EXPRESS_G: 72 of 89 . . . . . . 3151
Figure G.73 ARM diagram in EXPRESS_G: 73 of 89 . . . . . . 3152
Figure G.74 ARM diagram in EXPRESS_G: 74 of 89 . . . . . . 3153
Figure G.75 ARM diagram in EXPRESS_G: 75 of 89 . . . . . . 3154
Figure G.76 ARM diagram in EXPRESS_G: 76 of 89 . . . . . . 3155
Figure G.77 ARM diagram in EXPRESS_G: 77 of 89 . . . . . . 3156
Figure G.78 ARM diagram in EXPRESS_G: 78 of 89 . . . . . . 3157
Figure G.79 ARM diagram in EXPRESS_G: 79 of 89 . . . . . . 3158
Figure G.80 ARM diagram in EXPRESS_G: 80 of 89 . . . . . . 3159
Figure G.81 ARM diagram in EXPRESS_G: 81 of 89 . . . . . . 3160
Figure G.82 ARM diagram in EXPRESS_G: 82 of 89 . . . . . . 3161
Figure G.83 ARM diagram in EXPRESS_G: 83 of 89 . . . . . . 3162
Figure G.84 ARM diagram in EXPRESS_G: 84 of 89 . . . . . . 3163
Figure G.85 ARM diagram in EXPRESS_G: 85 of 89 . . . . . . 3164
Figure G.86 ARM diagram in EXPRESS_G: 86 of 89 . . . . . . 3165
Figure G.87 ARM diagram in EXPRESS_G: 87 of 89 . . . . . . 3166
Figure G.88 ARM diagram in EXPRESS_G: 88 of 89 . . . . . . 3167
Figure G.89 ARM diagram in EXPRESS_G: 89 of 89 . . . . . . 3168
Figure H.1 AIM diagram in EXPRESS_G: 1 of 137 . . . . . . 3170
Figure H.2 AIM diagram in EXPRESS_G: 2 of 137 . . . . . . 3171
Figure H.3 AIM diagram in EXPRESS_G: 3 of 137 . . . . . . 3172
Figure H.4 AIM diagram in EXPRESS_G: 4 of 137 . . . . . . 3173
Figure H.5 AIM diagram in EXPRESS_G: 5 of 137 . . . . . . 3174
Figure H.6 AIM diagram in EXPRESS_G: 6 of 137 . . . . . . 3175
Figure H.7 AIM diagram in EXPRESS_G: 7 of 137 . . . . . . 3176
Figure H.8 AIM diagram in EXPRESS_G: 8 of 137 . . . . . . 3177
Figure H.9 AIM diagram in EXPRESS_G: 9 of 137 . . . . . . 3178
Figure H.10 AIM diagram in EXPRESS_G: 10 of 137 . . . . . 3179
Figure H.11 AIM diagram in EXPRESS_G: 11 of 137 . . . . . 3180
Figure H.12 AIM diagram in EXPRESS_G: 12 of 137 . . . . . 3181
Figure H.13 AIM diagram in EXPRESS_G: 13 of 137 . . . . . 3182
Figure H.14 AIM diagram in EXPRESS_G: 14 of 137 . . . . . 3183
Figure H.15 AIM diagram in EXPRESS_G: 15 of 137 . . . . . 3184
Figure H.16 AIM diagram in EXPRESS_G: 16 of 137 . . . . . 3185
Figure H.17 AIM diagram in EXPRESS_G: 17 of 137 . . . . . 3186
Figure H.18 AIM diagram in EXPRESS_G: 18 of 137 . . . . . 3187
Figure H.19 AIM diagram in EXPRESS_G: 19 of 137 . . . . . 3188
Figure H.20 AIM diagram in EXPRESS_G: 20 of 137 . . . . . 3189
Figure H.21 AIM diagram in EXPRESS_G: 21 of 137 . . . . . 3190
Figure H.22 AIM diagram in EXPRESS_G: 22 of 137 . . . . . 3191
Figure H.23 AIM diagram in EXPRESS_G: 23 of 137 . . . . . 3192
Figure H.24 AIM diagram in EXPRESS_G: 24 of 137 . . . . . 3193
xc ISO 2001 – All rights reserved

---------------------- Page: 10 ----------------------
ISO 10303-214:2001(E)
Figure H.25 AIM diagram in EXPRESS_G: 25 of 137 . . . . . 3194
Figure H.26 AIM diagram in EXPRESS_G: 26 of 137 . . . . . 3195
Figure H.27 AIM diagram in EXPRESS_G: 27 of 137 . . . . . 3196
Figure H.28 AI
...