ISO/IEC 24727-1:2007

Identification cards — Integrated circuit card programming interfaces — Part 1: Architecture

ISO/IEC 24727 is a set of programming interfaces for interactions between integrated circuit cards and external applications to include generic services for multi-sector use. The organization and the operation of the ICC conform to ISO/IEC 7816-4. ISO/IEC 24727-1:2007 specifies system architecture and principles of operation, a capabilities discovery mechanism, security rationale. It does not cover the internal implementation within the card or the outside world. ISO/IEC 24727-1:2007 is independent of the physical interface technology. It applies to cards accessed by one or more of the following methods: contacts, close coupling and radio frequency.

Cartes d'identification — Interfaces programmables de cartes à puce — Partie 1: Architecture

General Information

• Status: Withdrawn
• Publication Date: 28-Jan-2007
• Withdrawal Date: 28-Jan-2007
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Drafting Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 16-Jun-2014

Relations

• Revised: ISO/IEC 24727-1:2014 - Identification cards — Integrated circuit card programming interfaces — Part 1: Architecture
• Effective Date: 03-Dec-2011

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 24727-1
First edition
2007-02-15


Identification cards — Integrated circuit
card programming interfaces —
Part 1:
Architecture
Cartes d'identification — Interfaces programmables de cartes à puce —
Partie 1: Architecture




Reference number
ISO/IEC 24727-1:2007(E)
©
ISO/IEC 2007

---------------------- Page: 1 ----------------------
ISO/IEC 24727-1:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO/IEC 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2007 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 24727-1:2007(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references. 1
3 Terms and definitions. 1
4 Abbreviated terms. 3
5 Interoperability. 3
6 Architecture. 4
6.1 General. 4
6.2 Architectural attributes. 4
6.3 Logical architecture. 4
6.4 Protocol independence . 5
6.5 Client-application service access layer interface. 5
6.6 Capability description. 6
6.7 Data model. 6
6.8 Generic card interface. 6
7 Security rationale. 7
Annex A (informative) Implementation configuration examples. 8
A.1 General. 8
A.2 Discrete layer configuration . 10
A.3 Combined configuration . 11
A.4 On-ICC generic card access layer configuration . 12
A.5 On-ICC implementation of service access and generic card access layers . 13
A.6 Loadable/fixed non-ICC components hosting of capability description . 14
A.7 Web service configuration. 15
A.8 Multiple application configuration . 16
A.9 Distributed implementation of the stack . 17
A.10 Distributed implementation using a trust mechanism. 18
Bibliography . 19

© ISO/IEC 2007 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 24727-1:2007(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 24727-1 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 17, Cards and personal identification.
ISO/IEC 24727 consists of the following parts, under the general title Identification cards — Integrated circuit
card programming interfaces:
— Part 1: Architecture
— Part 2: Generic card interface
— Part 3: Application interface
API administration and testing will form the subjects of the future Parts 4 and 5, respectively.
iv © ISO/IEC 2007 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/IEC 24727-1:2007(E)
Introduction
ISO/IEC 24727 is a set of programming interfaces for interactions between integrated circuit cards (ICCs) and
external applications to include generic services for multi-sector use. The organization and the operation of
the ICC conform to ISO/IEC 7816-4.
ISO/IEC 24727 is relevant to ICC applications desiring interoperability among diverse application domains.
ISO/IEC 24727 defines interfaces such that independent implementations are interoperable.
Services may be discoverable through mechanisms detailed in ISO/IEC 24727. ISO/IEC 24727 discovery
methods include provisions for a client-application to discover
⎯ card-applications available for selection on the ICC,
⎯ information about each card-application.
ISO/IEC 24727-1 specifies the conceptual framework. It provides essential background information for the
subsequent parts. Developers using ISO/IEC 24727 are encouraged to read this introductory part of
ISO/IEC 24727. The other parts provide technical details of the concepts specified in ISO/IEC 24727-1.
ISO/IEC 24727-2 details the functionality and related information structures available to the implementation of
the interface defined in ISO/IEC 24727-3.
ISO/IEC 24727-3 details service access mechanisms to initiate their use by a client-application.
ISO/IEC 24727-4 will detail trust mechanisms and connectivity mechanisms between adjacent components in
the communication stack.
ISO/IEC 24727-5 will detail test mechanisms.
Functionality for ISO/IEC 24727-3 usually resides outside of the ICC. Functionality for ISO/IEC 24727-2 may
reside inside the ICC.
© ISO/IEC 2007 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO/IEC 24727-1:2007(E)

Identification cards — Integrated circuit card programming
interfaces —
Part 1:
Architecture
1 Scope
ISO/IEC 24727 is a set of programming interfaces for interactions between integrated circuit cards and
external applications to include generic services for multi-sector use. The organization and the operation of
the ICC conform to ISO/IEC 7816-4.
This part of ISO/IEC 24727 specifies
⎯ system architecture and principles of operation,
⎯ a capabilities discovery mechanism,
⎯ security rationale.
ISO/IEC 24727-1 is independent of physical interface technology.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO/IEC 7816-4:2005 Identification cards — Integrated circuit cards — Part 4: Organization, security and
commands for interchange
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
authentication
process of assessing a level of confidence in identity or identification
3.2
authentication protocol
specific process for authentication
3.3
card
integrated circuit card
© ISO/IEC 2007 – All rights reserved 1

---------------------- Page: 6 ----------------------
ISO/IEC 24727-1:2007(E)
3.4
card-application
uniquely addressable set of functionalities on an ICC that provide data storage and computational services to
a client-application
3.5
client-application
processing software needing access to one or more card-application(s)
3.6
data element
item of information seen at the interface for which are specified a name, a description of logical content, a
format and a coding
[ISO/IEC 7816-4]
3.7
data set
named collection of data structures for interoperability
3.8
data structure for interoperability
ISO/IEC 7816-4 file identified by a two-byte file identifier or an ISO/IEC 8825 BER-TLV data object identified
by an octet string encoding an ASN.1 tag
3.9
differential-identity
set of information that comprises a name, a marker, and an authentication protocol
3.10
generic card access layer
component which provides an ISO/IEC 24727-2 interface to a service access layer
3.11
identification
collective aspect of a set of characteristics and processes by which an entity is recognizable or known
3.12
interface
point at which independent and often unrelated systems meet and act on or communicate with each other
3.13
interoperability
ability for any card-application interface that conforms to ISO/IEC 24727 to be used by any client-application
conforming to ISO/IEC 24727
3.14
marker
item of information within a differential-identity representing a unique characteristic of an entity
3.15
middleware
software that connects two otherwise separate applications
3.16
service
set of processing functions available at an interface
3.17
service access layer
component which provides an ISO/IEC 24727-3 API to a client-application
2 © ISO/IEC 2007 – All rights reserved

---------------------- Page: 7 ----------------------
ISO/IEC 24727-1:2007(E)
4 Abbreviated terms
AID application identifier
ACD application capability description
APDU application protocol data unit
API application programming interface
BER basic encoding rules
CCD card capability description
DSI data structure for interoperability
GCAL generic card access layer
GCI generic card interface
IAS identity, authentication, and (digital) signature services
ICC integrated circuit card
IFD interface device
OID object identifier
PKI public key infrastructure
RFU reserved for future use by ISO/IEC
SAL service access layer
TLV tag-length-value
URL uniform resource locator
5 Interoperability
Interoperability is the ability for any card-application interface that conforms to ISO/IEC 24727 to be used by
any client-application conforming to ISO/IEC 24727. ISO/IEC 24727 defines a set of interfaces and discovery
mechanisms such that independent implementations are functionally equivalent as verifiable by testing.
ISO/IEC 24727 defines interfaces at two levels
⎯ between the client-application and a service interface,
⎯ between a service access layer and a generic card interface.
For each specified interface, the relevant parts of ISO/IEC 24727 shall define which functionality shall be
supported.
ISO/IEC 24727 applies to an ICC providing directly, or indirectly, a capability description. Capability
description is described in 6.6.
© ISO/IEC 2007 – All rights reserved 3

---------------------- Page: 8 ----------------------
ISO/IEC 24727-1:2007(E)
The service interface, generic card interface, and capability descriptions may be extended according to the
future development of ICC technologies.
6 Architecture
6.1 General
ISO/IEC 24727 partitions functionality between a client-application running on a host platform and a layered
set of services that can be used by a client-application. The organization of services is further defined into a
service interface, a generic card interface, and one or more card-applications resident on an ICC.
6.2 Architectural attributes
The service interface implements features given in 6.5.
The generic card interface implements features given in 6.8.
The connectivity interface implements features given in 6.9.
The trusted channel interface implements features given in 6.10.
Card-applications manage data sets. Each data set is named and the card-application list of data set names is
available to the client-application by direct knowledge or discovery. A client-application uses the data set
name when requesting a service to be performed on a data set.
Access to data sets is controlled through an access control list. The access control list describes the security
conditions that shall be satisfied in order to perform an action on the data set. ISO/IEC 24727-3 provides
additional detail on access control lists, identities, and actions.
Card-applications are organized on an ICC as an alpha card-application and one or more card-applications.
Card-applications are selectable by AID at the service interface.
6.3 Logical architecture
Figure 1 illustrates the relationships between a client-application, the layers and interfaces defined in
ISO/IEC 24727, and a card-application resident on an ICC. The flow of requests from the client-application to
the card-application is shown as directional arrows indicating either a request or a confirmation. The naming of
each arrow conveys functionality being supported by the standard. The actual format and syntax of a request
or a confirmation is not detailed in this part of ISO/IEC 24727.
4 © ISO/IEC 2007 – All rights reserved

---------------------- Page: 9 ----------------------
ISO/IEC 24727-1:2007(E)
Client-Application
Action Action
Request Confirmation
Service Interface ISO/IEC 24727-3
Trust
Service Access Layer
Mechanism*
Generic Generic
Request Confirmation
Generic Card Interface ISO/IEC 24727-2
Generic Card Access Layer
Trust
Mechanism*
Specific Specific
Request Confirmation
Specific Interface (Out of Scope)
Card-Application
(*)Note: None, one or both of
these mechanisms may exist
Figure 1 — Logical architecture of ISO/IEC 24727
Functionality of ISO/IEC 24727 can be implemented in more than one manner.
6.4 Protocol independence
ISO/IEC 24727 defined interfaces are specified in a manner independent of the protocols required to establish
the communication between the client-application and card-application.
Figure 1 shows a stack of layers and interfaces.
A proxy is an implementation of the interface of a stack element to allow the stack element implementation to
be split. For example, card-application in Figure 1 is a proxy for the actual card.
See Annex A for details on the configurations of implementations of the stack.
6.5 Client-application service access layer interface
ISO/IEC 24727-3 provides a detailed description of the service interface available to a client-application.
An implementation of the service interface
⎯ translates an action request into one or more generic requests,
© ISO/IEC 2007 – All rights reserved 5
ICC Services

---------------------- Page: 10 ----------------------
ISO/IEC 24727-1:2007(E)
⎯ translates one or more generic confirmations into an action confirmation.
The service interface includes
⎯ client-application to card-application connectivity using the generic card interface,
⎯ client-application to card-application security in accordance with the security rationale,
⎯ cryptographic service,
⎯ differential-identity service.
6.6 Capability description
The service interface and generic card interface are specified in a manner that facilitates discovery of the
capabilities of one or more card-applications resident on an ICC. The information structure for enabling this
discovery mechanism is the Capability Description.
Two levels of Capability Description are detailed in ISO/IEC 24727.
⎯ A Card Capability Description (CCD) is used to discover one or more card-applications resident on the
ICC. The CCD resides in the alpha card-application. The CCD provides APDU translation information.
⎯ An Application Capability Description (ACD) may be provided with a card-application. The ACD, if present,
is used to inform the requesting entity of additional
...