ISO/IEC 29341-9-13:2008

Information technology — UPnP Device Architecture — Part 9-13: Imaging Device Control Protocol - Scan Service

Ingrid Glavich Ingrid Glavich 2 16 1995-11-10T13:27:00Z 2008-11-17T15:19:00Z 2008-11-17T15:19:00Z 1 65 376 3 1 440 10.6845 Clean 21 0 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} ISO/IEC 29341-9-13:2008(E) represents the scan functionality of a scanner device. The series of ISO/IEC 29341 publications defines an architecture for pervasive peer-to-peer network connectivity of intelligent appliances, wireless devices and PCs. It is designed to bring easy to use, flexible, standards-based connectivity to ad-hoc or unmanaged networks whether in the home, in a small business, public spaces or attached to the Internet.

Technologies de l'information — Architecture de dispositif UPnP — Partie 9-13: Protocole de contrôle de dispositif d'image — Service "scan"

General Information

• Status: Published
• Publication Date: 27-Nov-2008
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: ISO/IEC JTC 1 - Information technology
• Drafting Committee: ISO/IEC JTC 1 - Information technology
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 31-Jan-2020

Standards Content (Sample)

ISO/IEC 29341-9-13
Edition 1.0 2008-11
INTERNATIONAL
STANDARD


Information technology – UPnP Device Architecture –
Part 9-13: Imaging Device Control Protocol – Scan Service


ISO/IEC 29341-9-13:2008(E)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2008 ISO/IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about ISO/IEC copyright or have an enquiry about obtaining additional rights to this
publication, please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]

---------------------- Page: 2 ----------------------
ISO/IEC 29341-9-13
Edition 1.0 2008-11
INTERNATIONAL
STANDARD


Information technology – UPnP Device Architecture –
Part 9-13: Imaging Device Control Protocol – Scan Service
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
S
ICS 35.200 ISBN 2-8318-1011-41

---------------------- Page: 3 ----------------------
– 2 – 29341-9-13 © ISO/IEC:2008(E)
CONTENTS
FOREWORD .5
ORIGINAL UPNP DOCUMENTS (informative) .7
1 Overview and Scope .9
2 Service Modeling Definitions .10
2.1 ServiceType .10
2.2 State Variables.10
2.2.1 JobName.11
2.2.2 FailureCode .11
2.2.3 State.12
2.2.4 StateReason .12
2.2.5 ImageFormat.12
2.2.6 CompressionFactor.12
2.2.7 ImageType .12
2.2.8 Color Type and BitDepth.13
2.2.9 ColorSpace .14
2.2.10 UseFeeder .14
2.2.11 BaseName .14
2.2.12 AppendSideNumber.14
2.2.13 SideCount .15
2.2.14 SideNumber .15
2.2.15 Destination .15
2.2.16 Resolution .15
2.2.17 ScanLength.15
2.2.18 DeviceID .16
2.2.19 HeightLimit, WidthLimit, XValueLimit, YValueLimit .16
2.2.20 Timeout .17
2.2.21 ErrorTimeout .17
2.2.22 RegistrationID .17
2.2.23 JobID.18
2.2.24 DestinationID .18
2.3 Eventing and Moderation .19
2.4 Action Set.20
2.4.1 (Void) StartScan(RegistrationIDIn, UseFeederIn, SideCountIn, JobNameIn,
ResolutionIn, ImageXOffsetIn, ImageYOffsetIn, ImageWidthIn, ImageHeightIn,
ImageFormatIn, CompressionFactorIn, ImageTypeIn, ColorTypeIn, BitDepthIn, ColorSpaceIn,
BaseNameIn, AppendSideNumberIn, TimeoutIn, ActualTimeoutOut, JobIDOut,
ActualWidthOut, ActualHeightOut ).21
2.4.2 (Void) Start(JobIDIn, UseFeederIn, SideCountIn) .22
2.4.3 (Void) Stop(JobIDIn) .23
2.4.4 (Void) Abort(JobIDIn).23
2.4.5 (Void) SetConfiguration(JobIDIn, JobNameIn, ResolutionIn, ImageXOffsetIn,
ImageYOffsetIn, ImageWidthIn, ImageHeightIn, ImageFormatIn, CompressionFactorIn,
ImageTypeIn, ColorTypeIn, BitDepthIn, ColorSpaceIn, BaseNameIn, AppendSideNumberIn,
TimeoutIn, ActualTimeoutOut, ActualWidthOut, ActualHeightOut).24
2.4.6 (Void) GetConfiguration(JobNameOut, ResolutionOut, ImageXOffsetOut,
ImageYOffsetOut, ImageWidthOut, ImageHeightOut, ImageFormatOut,
CompressionFactorOut, ImageTypeOut, ColorTypeOut, BitDepthOut, ColorSpaceOut,
BaseNameOut, AppendSideNumberOut, TimeoutOut) .26
2.4.7 (Void) GetSideInformation(SideNumberOut, SideCountOut, ScanLengthOut) .26
2.4.8 (Void) GetDestination( JobIDIn, DestinationOut, DestinationIDOut ).27
2.4.9 (Void) GetState( StateOut, StateReasonOut, FailureCodeOut ).27
2.4.10 Common Error Codes.28
2.5 Theory of Operation .29

---------------------- Page: 4 ----------------------
29341-9-13 © ISO/IEC:2008(E) – 3 –
2.5.1 Sheet Size and Image Area .29
2.5.2 Flow Example: Feeder-less, Button-less Scan Operation with Pull Image Transfer .30
2.5.3 Flow Example: Feeder-less Scan Operation with Pull Image Transfer .31
2.5.4 Flow Example: Feeder-less Scan Operation with Push Image Transfer .31
2.5.5 Flow Example: Scan Operation with Feeder and Pull Image Transfer.32
2.5.6 Flow Example: Scan Operation with Feeder and Push Image Transfer.32
2.5.7 Scanner Timeouts and Feeder Interactions.33
2.5.8 Scanner Buffer Functionality.37
2.5.9 Using XHTML-Print To Send An Image Directly To A Printer.37
2.5.10 BaseName, SideNumber, AppendSideNumber and Destination.37
2.5.11 Relationship between the Scan Service and the Feeder Service .38
2.5.12 Relationship between the Scan Service and the ExternalActivity Service .39
2.5.13 Extending Scanner Functionality.39
3 XML Service Template for Scan:1.0 .40
4 Testing.51
4.1 Syntax Testing.51
4.1.1 Issues.51
4.1.2 StartScan Syntax Test .51
Annex A (informative) Scan to Print using Multipart MIME .52

---------------------- Page: 5 ----------------------
– 4 – 29341-9-13 © ISO/IEC:2008(E)
LIST OF TABLES
Table 1: State Variables .10
Table 1.1: allowedValueList for FailureCode.11
Table 1.2: allowedValueList for ImageFormat.12
Table 1.3: allowedValueList for ImageType.13
Table 1.4: allowedValueList for ColorType .13
Table 1.5: allowedValueList for BitDepth.13
Table 1.6: Common Pixel Description Values .13
Table 1.7: allowedValueList for ColorSpace.14
Table 1.8: allowedValueList for UseFeeder.14
Table 1.9: allowedValueList for BaseName.14
Table 1.10: allowedValueList for AppendSideNumber .14
Table 1.11: allowedValueRange for SideCount.15
Table 1.12: allowedValueList for SideNumber.15
Table 1.13: allowedValueList for Resolution.15
Table 1.14: allowedValueRange for ScanLength .15
Table 1.15: allowedValueRange for HeightLimit.16
Table 1.16: allowedValueRange for WidthLimit.16
Table 1.17: allowedValueRange for XValueLimit .17
Table 1.18: allowedValueRange for YValueLimit .17
Table 1.19: allowedValueRange for Timeout .17
Table 2: Event Moderation.19
Table 3: Actions.20
Table 4: Arguments for StartScan .21
Table 5: Arguments for Start .22
Table 6: Arguments for Stop.23
Table 7: Arguments for Abort .23
Table 8: Arguments for SetConfiguration .24
Table 9: Arguments for GetConfiguration.26
Table 10: Arguments for GetSideInformation.26
Table 11: Arguments for GetDestination .27
Table 12: Arguments for GetState.27
Table 13: Common Error Codes.28
Table 14: Sheet and Image Area Dimensions.29
Table 15: Scanner State Transition Table .35
Table 16: Current State vs Service Actions.36
Table 17: Destination Names .38

---------------------- Page: 6 ----------------------
29341-9-13 © ISO/IEC:2008(E) – 5 –
INFORMATION TECHNOLOGY –
UPNP DEVICE ARCHITECTURE –

Part 9-13: Imaging Device Control Protocol –
Scan Service
FOREWORD
1) ISO (International Organization for Standardization) and IEC (International Electrotechnical Commission) form
the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards. Their preparation is entrusted to technical
committees; any ISO and IEC member body interested in the subject dealt with may participate in this
preparatory work. International governmental and non-governmental organizations liaising with ISO and IEC
also participate in this preparation.
2) In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC
1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for
voting. Publication as an International Standard requires approval by at least 75 % of the national bodies
casting a vote.
3) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC and ISO member bodies.
4) IEC, ISO and ISO/IEC publications have the form of recommendations for international use and are accepted
by IEC and ISO member bodies in that sense. While all reasonable efforts are made to ensure that the
technical content of IEC, ISO and ISO/IEC publications is accurate, IEC or ISO cannot be held responsible for
the way in which they are used or for any misinterpretation by any end user.
5) In order to promote international uniformity, IEC and ISO member bodies undertake to apply IEC, ISO and
ISO/IEC publications transparently to the maximum extent possible in their national and regional publications.
Any divergence between any ISO/IEC publication and the corresponding national or regional publication should
be clearly indicated in the latter.
6) ISO and IEC provide no marking procedure to indicate their approval and cannot be rendered responsible for
any equipment declared to be in conformity with an ISO/IEC publication.
7) All users should ensure that they have the latest edition of this publication.
8) No liability shall attach to IEC or ISO or its directors, employees, servants or agents including individual
experts and members of their technical committees and IEC or ISO member bodies for any personal injury,
property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including
legal fees) and expenses arising out of the publication of, use of, or reliance upon, this ISO/IEC publication or
any other IEC, ISO or ISO/IEC publications.
9) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
IEC and ISO draw attention to the fact that it is claimed that compliance with this document may involve the use of
patents as indicated below.
ISO and IEC take no position concerning the evidence, validity and scope of the putative patent rights. The holders
of the putative patent rights have assured IEC and ISO that they are willing to negotiate free licences or licences
under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect,
the statements of the holders of the putative patent rights are registered with IEC and ISO.
Intel Corporation has informed IEC and ISO that it has patent applications or granted patents.
Information may be obtained from:
Intel Corporation
Standards Licensing Department
5200 NE Elam Young Parkway
MS: JFS-98
USA – Hillsboro, Oregon 97124
Microsoft Corporation has informed IEC and ISO that it has patent applications or granted patents as listed below:

---------------------- Page: 7 ----------------------
– 6 – 29341-9-13 © ISO/IEC:2008(E)
6101499 / US; 6687755 / US; 6910068 / US; 7130895 / US; 6725281 / US; 7089307 / US; 7069312 / US;
10/783 524 /US
Information may be obtained from:
Microsoft Corporation
One Microsoft Way
USA – Redmond WA 98052
Philips International B.V. has informed IEC and ISO that it has patent applications or granted patents.
Information may be obtained from:
Philips International B.V. – IP&S
High Tech campus, building 44 3A21
NL – 5656 Eindhoven
NXP B.V. (NL) has informed IEC and ISO that it has patent applications or granted patents.
Information may be obtained from:
NXP B.V. (NL)
High Tech campus 60
NL – 5656 AG Eindhoven
Matsushita Electric Industrial Co. Ltd. has informed IEC and ISO that it has patent applications or granted patents.
Information may be obtained from:
Matsushita Electric Industrial Co. Ltd.
1-3-7 Shiromi, Chuoh-ku
JP – Osaka 540-6139
Hewlett Packard Company has informed IEC and ISO that it has patent applications or granted patents as listed
below:
5 956 487 / US; 6 170 007 / US; 6 139 177 / US; 6 529 936 / US; 6 470 339 / US; 6 571 388 / US; 6 205
466 / US
Information may be obtained from:
Hewlett Packard Company
1501 Page Mill Road
USA – Palo Alto, CA 94304
Samsung Electronics Co. Ltd. has informed IEC and ISO that it has patent applications or granted patents.
Information may be obtained from:
Digital Media Business, Samsung Electronics Co. Ltd.
416 Maetan-3 Dong, Yeongtang-Gu,
KR – Suwon City 443-742
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights
other than those identified above. IEC and ISO shall not be held responsible for identifying any or all such patent
rights.
ISO/IEC 29341-9-13 was prepared by UPnP Implementers Corporation and adopted, under the PAS procedure, by
joint technical committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of
ISO and IEC.
The list of all currently available parts of the ISO/IEC 29341 series, under the general title Universal plug and play
(UPnP) architecture, can be found on the IEC web site.
This International Standard has been approved by vote of the member bodies, and the voting results may be
obtained from the address given on the second title page.

---------------------- Page: 8 ----------------------
29341-9-13 © ISO/IEC:2008(E) – 7 –
ORIGINAL UPNP DOCUMENTS
(informative)
Reference may be made in this document to original UPnP documents. These references are retained in order to
maintain consistency between the specifications as published by ISO/IEC and by UPnP Implementers Corporation.
The following table indicates the original UPnP document titles and the corresponding part of ISO/IEC 29341:
UPnP Document Title ISO/IEC 29341 Part
UPnP Device Architecture 1.0 ISO/IEC 29341-1
UPnP Basic:1 Device ISO/IEC 29341-2
UPnP AV Architecture:1 ISO/IEC 29341-3-1
UPnP MediaRenderer:1 Device ISO/IEC 29341-3-2
UPnP MediaServer:1 Device ISO/IEC 29341-3-3
UPnP AVTransport:1 Service ISO/IEC 29341-3-10
UPnP ConnectionManager:1 Service ISO/IEC 29341-3-11
UPnP ContentDirectory:1 Service ISO/IEC 29341-3-12
UPnP RenderingControl:1 Service ISO/IEC 29341-3-13
UPnP MediaRenderer:2 Device ISO/IEC 29341-4-2
UPnP MediaServer:2 Device ISO/IEC 29341-4-3
UPnP AV Datastructure Template:1 ISO/IEC 29341-4-4
UPnP AVTransport:2 Service ISO/IEC 29341-4-10
UPnP ConnectionManager:2 Service ISO/IEC 29341-4-11
UPnP ContentDirectory:2 Service ISO/IEC 29341-4-12
UPnP RenderingControl:2 Service ISO/IEC 29341-4-13
UPnP ScheduledRecording:1 ISO/IEC 29341-4-14
UPnP DigitalSecurityCamera:1 Device ISO/IEC 29341-5-1
UPnP DigitalSecurityCameraMotionImage:1 Service ISO/IEC 29341-5-10
UPnP DigitalSecurityCameraSettings:1 Service ISO/IEC 29341-5-11
UPnP DigitalSecurityCameraStillImage:1 Service ISO/IEC 29341-5-12
UPnP HVAC_System:1 Device ISO/IEC 29341-6-1
UPnP HVAC_ZoneThermostat:1 Device ISO/IEC 29341-6-2
UPnP ControlValve:1 Service ISO/IEC 29341-6-10
UPnP HVAC_FanOperatingMode:1 Service ISO/IEC 29341-6-11
UPnP FanSpeed:1 Service ISO/IEC 29341-6-12
UPnP HouseStatus:1 Service ISO/IEC 29341-6-13
UPnP HVAC_SetpointSchedule:1 Service ISO/IEC 29341-6-14
UPnP TemperatureSensor:1 Service ISO/IEC 29341-6-15
UPnP TemperatureSetpoint:1 Service ISO/IEC 29341-6-16
UPnP HVAC_UserOperatingMode:1 Service ISO/IEC 29341-6-17
UPnP BinaryLight:1 Device ISO/IEC 29341-7-1
UPnP DimmableLight:1 Device ISO/IEC 29341-7-2
UPnP Dimming:1 Service ISO/IEC 29341-7-10
UPnP SwitchPower:1 Service ISO/IEC 29341-7-11
UPnP InternetGatewayDevice:1 Device ISO/IEC 29341-8-1
UPnP LANDevice:1 Device ISO/IEC 29341-8-2
UPnP WANDevice:1 Device ISO/IEC 29341-8-3
UPnP WANConnectionDevice:1 Device ISO/IEC 29341-8-4
UPnP WLANAccessPointDevice:1 Device ISO/IEC 29341-8-5
UPnP LANHostConfigManagement:1 Service ISO/IEC 29341-8-10
UPnP Layer3Forwarding:1 Service ISO/IEC 29341-8-11
UPnP LinkAuthentication:1 Service ISO/IEC 29341-8-12
UPnP RadiusClient:1 Service ISO/IEC 29341-8-13
UPnP WANCableLinkConfig:1 Service ISO/IEC 29341-8-14
UPnP WANCommonInterfaceConfig:1 Service ISO/IEC 29341-8-15
UPnP WANDSLLinkConfig:1 Service ISO/IEC 29341-8-16
UPnP WANEthernetLinkConfig:1 Service ISO/IEC 29341-8-17
UPnP WANIPConnection:1 Service ISO/IEC 29341-8-18
UPnP WANPOTSLinkConfig:1 Service ISO/IEC 29341-8-19
UPnP WANPPPConnection:1 Service ISO/IEC 29341-8-20
UPnP WLANConfiguration:1 Service ISO/IEC 29341-8-21
UPnP Printer:1 Device ISO/IEC 29341-9-1
UPnP Scanner:1.0 Device ISO/IEC 29341-9-2
UPnP ExternalActivity:1 Service ISO/IEC 29341-9-10
UPnP Feeder:1.0 Service ISO/IEC 29341-9-11
UPnP PrintBasic:1 Service ISO/IEC 29341-9-12
UPnP Scan:1 Service ISO/IEC 29341-9-13
UPnP QoS Architecture:1.0 ISO/IEC 29341-10-1
UPnP QosDevice:1 Service ISO/IEC 29341-10-10
UPnP QosManager:1 Service ISO/IEC 29341-10-11
UPnP QosPolicyHolder:1 Service ISO/IEC 29341-10-12
UPnP QoS Architecture:2 ISO/IEC 29341-11-1
UPnP QOS v2 Schema Files ISO/IEC 29341-11-2

---------------------- Page: 9 ----------------------
– 8 – 29341-9-13 © ISO/IEC:2008(E)
UPnP Document Title ISO/IEC 29341 Part
UPnP QosDevice:2 Service ISO/IEC 29341-11-10
UPnP QosManager:2 Service ISO/IEC 29341-11-11
UPnP QosPolicyHolder:2 Service ISO/IEC 29341-11-12
UPnP RemoteUIClientDevice:1 Device ISO/IEC 29341-12-1
UPnP RemoteUIServerDevice:1 Device ISO/IEC 29341-12-2
UPnP RemoteUIClient:1 Service ISO/IEC 29341-12-10
UPnP RemoteUIServer:1 Service ISO/IEC 29341-12-11
UPnP DeviceSecurity:1 Service ISO/IEC 29341-13-10
UPnP SecurityConsole:1 Service ISO/IEC 29341-13-11

---------------------- Page: 10 ----------------------
29341-9-13 © ISO/IEC:2008(E) – 9 –
1 Overview and Scope
This service definition is compliant with the UPnP Device Architecture version 1.0.
The Scan service represents the scan functionality of a scanner device. A control point may use this service to
initiate a scan operation and receive images that represent the document in the scanner. The control point may
pull the images using HTTP/GETs from the Destination URL or the service map push the images using
HTTP/POSTs. The service has the following basic functional areas:
Operation Functionality
The StartScan, Start, Stop, Abort and SetConfiguration actions are used to control the action of the scan service.
Status Functionality
The GetConfiguration, GetSideInformation, GetDestination and GetState actions are used to query the current
state of the scan service.
This service template does not address:
• Faxing or Copying

---------------------- Page: 11 ----------------------
– 10 – 29341-9-13 © ISO/IEC:2008(E)
2 Service Modeling Definitions
2.1 ServiceType
A service that is compliant with this template is identified with the following service type: urn:schemas-upnp-
org:service:Scan:1
2.2 State Variables
Table 1: State Variables
Variable Name Req. or Data Allowed Default Eng.
1 2 2
Opt. Type Value Value Units
[device-setting
JobName R string “”
| …]
[No Error |
FailureCode R string No Error
Jammed |
Timeout
Reached |
ErredTimeout
Reached |
Destination
Not Reachable]
[Idle | Reserved
State R string Idle
| NotReady |
Pending |
Scanning |
Finishing |
Erred]

StateReason R string
[device-setting
ImageFormat R string image/jpe
| image/jpeg]
g
-1-100
CompressionFactor R i4 100 n/a
[device-setting
ImageType R string Mixed
| Mixed]
[device-setting
ColorType R string Color
| Color | Mono]
[device-setting
BitDepth R string 8 bits
| 8]
[device-setting
ColorSpace R string sRGB n/a
| sRGB]
[device-setting]
UseFeeder R string 0 (false) n/a
[device-setting
BaseName R string buffer
| buffer]
[device-
AppendSideNumber R string 0 (false) n/a
setting|0]
SideCount R i4 [-1-1] 0 n/a

SideNumber R i4 1 n/a

Destination R string
[-1 | 0 ]
Timeout R i4 seconds

ErrorTimeout R i4 vendor seconds
unique
[device-setting]
Resolution R string Pixels

---------------------- Page: 12 ----------------------
29341-9-13 © ISO/IEC:2008(E) – 11 –
Variable Name Req. or Data Allowed Defau
...