Information technology — Guidelines for slap tenprint fingerprintture

This document provides guidelines to follow during the acquisition process of slap tenprints in order to obtain fingerprints of the best quality possible within acceptable time constraints. Non-cooperative users are out of the scope of this document. When using ten-fingerprint sensors, it is fundamental to know how to use them and how to proceed with the acquisition. This document describes how to capture fingerprints correctly by specifying best practices for slap tenprint captures. It gives recommendations on the following topics: 1) hardware of the fingerprint sensor and its deployment; 2) user guidance; 3) enrolment process including a sample workflow; 4) application software for developers and system integrators; 5) processing, compression and coding of the acquired fingerprint images; 6) operational issues and data logging; 7) evaluation of a solution and its components. Although this document primarily focuses on reaching optimal data quality for enrolment purposes, the recommendations given here are applicable for other purposes. All processes which rely on good quality tenprint slaps can take advantage of the best practices.

Titre manque

General Information

Status

Published

Publication Date

18-Jul-2018

ICS

35.040 - Information coding

35.240.15 - Identification cards. Chip cards. Biometrics

Technical Committee

ISO/IEC JTC 1/SC 37 - Biometrics

Drafting Committee

ISO/IEC JTC 1/SC 37 - Biometrics

Current Stage

9060 - Close of review

Start Date

04-Mar-2029

Ref Project

Relations

Revises

ISO/IEC TS 20027:2015 - Biometrics interoperability profiles — Best practices for slap tenprint captures

Effective Date

13-Feb-2016

Buy Standard

ISO/IEC 20027:2018 - Information technology -- Guidelines for slap tenprint fingerprintture

Standard

ISO/IEC 20027:2018 - Information technology -- Guidelines for slap tenprint fingerprintture

English language

16 pages

sale 15% off

Preview

sale 15% off

Preview

Standards Content (Sample)

ISO/IEC 20027:2018 - Informati...

INTERNATIONAL ISO/IEC
STANDARD 20027
First edition
2018-07
Information technology — Guidelines
for slap tenprint fingerprintture
Titre manque
Reference number
ISO/IEC 20027:2018(E)
©
ISO/IEC 2018

---------------------- Page: 1 ----------------------
ISO/IEC 20027:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 20027:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Sensor hardware requirement . 2
5 Acquisition software . 2
5.1 Acquisition process . 2
5.2 User feedback . 2
5.3 Acquisition check . 3
5.4 Image processing . 3
5.4.1 Resolution . 3
5.4.2 Segmentation . 3
5.4.3 Compression . 4
6 Logging and evaluation of data . 4
6.1 Logging data . 4
6.2 Useful statistical evaluations . 5
7 Operational process . 5
7.1 General user guidance .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO

ISO/IEC 19785-3:2020(Main)

Information technology — Common Biometric Exchange Formats Framework — Part 3: Patron format specifications

This document specifies and publishes registered Common Biometric Exchange Formats Framework (CBEFF) patron formats defined by the CBEFF patron ISO/IEC JTC 1/SC 37, and specifies their registered CBEFF patron format types (see ISO/IEC 19785-1) and resulting full ASN.1 OIDs.

Standard
151 pages
English language
sale 15% off
Draft
151 pages
English language
sale 15% off

ISO

ISO/IEC 24779-5:2020(Main)

Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technologies — Pictograms, icons and symbols for use with biometric systems — Part 5: Face applications

The ISO/IEC 24779 series of standards focuses on communication with the data capture subject. This document contains a set of pictograms, icons and symbols to help the general public understand the concepts and procedures for using electronic systems that collect and/or evaluate facial images. Operators can use this document, with the possibility of using additional symbols and information. This set of pictograms, icons and symbols is designed to be used to: — identify the type of biometric sensor; — provide supporting instructions related to facial image collection. To provide this functionality, the set of pictograms, icons and symbols includes both directional pictograms, icons and symbols and action or feedback pictograms, icons and symbols. The facial image pictograms, icons and symbols include: — facial image capture; — single person; — no hat; — no sunglasses; — neutral expression; — hair up; — view direction. Although the pictograms, icons and symbols are presented individually, the pictograms, icons and symbols are intended to be combined to fully illustrate the facial image capture interaction. For example, in a customs or immigration environment, procedures constructed from the individual pictograms, icons and symbols could be presented as: — a series of posters while passengers are in the queue; — a series of transitional frames in a biometric booth; — an animated video or series of transitional frames while passengers are in the queue; — instructional leaflets for passengers to read in the queue.

Standard
7 pages
English language
sale 15% off

ISO

ISO/IEC 30137-1:2019(Main)

Information technology — Use of biometrics in video surveillance systems — Part 1: System design and specification

The ISO 30137 series is applicable to the use of biometrics in VSS (also known as Closed Circuit Television or CCTV systems) for a number of scenarios, including real-time operation against watchlists and in post event analysis of video data. In most cases, the biometric mode of choice will be face recognition, but this document also provides guidance for other modalities such as gait recognition. This document: — defines the key terms for use in the specification of biometric technologies in a VSS, including metrics for defining performance; — provides guidance on selection of camera types, placement of cameras, image specification etc. for the operation of a biometric recognition capability in conjunction with a VSS; — provides guidance on the composition of the gallery (or watchlist) against which facial images from the VSS are compared, including the selection of appropriate images of sufficient quality, and the size of the gallery in relation to performance requirements; — makes recommendations on data formats for facial images and other relevant information (including metadata) obtained from video footage, used in watchlist images, or from observations made by human operators; — establishes general principles for supporting the operator of the VSS, including user interfaces and processes to ensure efficient and effective operation, and highlights the need to have suitably trained personnel; — highlights the need for robust governance processes to provide assurance that the implemented security, privacy and personal data protection measures specific to the use of biometric technologies with a VSS (e.g. internationally recognizable signage) are fit for purpose, and that societal considerations are reflected in the deployed system. This document also provides information on related recognition and detection tasks in a VSS such as: — estimation of crowd densities; — determining patterns of movement of individuals; — identification of individuals appearing in more than one camera; — use of other biometric modalities such as gait or iris; — use of specialized software to infer attributes of individuals, e.g. estimation of gender and age; — interfaces to other related functionality, e.g. video analytics to measure queue lengths or to alert for abandoned baggage.

Standard
46 pages
English language
sale 15% off

ISO

ISO/IEC 30106-1:2016/Amd 1:2019(Amendment)

Information technology — Object oriented BioAPI — Part 1: Architecture — Amendment 1: Additional specifications and conformance statements

Standard
17 pages
English language
sale 15% off

ISO

ISO/IEC TR 29196:2018(Main)

Information technology — Guidance for biometric enrolment

This document consolidates information relating to successful, secure and usable implementation of biometric enrolment processes, while indicating risk factors that organisations proposing to use biometric technologies will should address during procurement, design, deployment and operation. Much of the information is generic to many types of application, e.g. from national scale commercial and government applications, to closed systems for in-house operations, and to consumer applications. However, the intended application and its purpose often have influence on the necessary enrolment data quality and are intended to be taken into account when specifying an enrolment system and process. The document points out the differences in operation relating to specific types of application, e.g. where self-enrolment is more appropriate than attended operation. This document focuses on mandatory, attended enrolment at fixed locations. In summary, this document consolidates information relating to better practice implementation of biometric enrolment capability in various business contexts including considerations of process, function (system), and technology, as well as legal/privacy and policy aspects. The document provides guidance on collection and storage of biometric enrolment data and the impact on dependent processes of verification and identification. This document does not include material specific to forensic and law enforcement applications. This document does not contain any mandatory requirements. The following terms are used in this document to provide guidance. The terms "should" and "should not" indicate that among several possibilities one is recommended as particularly suitable, without mentioning or excluding others, or that a certain course of action is preferred but not necessarily required, or that (in the negative form) a certain possibility or course of action is discouraged but not prohibited. The term "may" indicates a course of action permissible within the limits of the publication. The terms "can" and "cannot" indicate a possibility and capability, whether material, physical or causal.

Technical report
55 pages
English language
sale 15% off

ISO

ISO/IEC 19784-1:2018(Main)

Information technology — Biometric application programming interface — Part 1: BioAPI specification

ISO/IEC 19784-1:2018 defines the Application Programming Interface (API) and Service Provider Interface (SPI) for standard interfaces within a biometric system that support the provision of that biometric system using components from multiple vendors. It provides interworking between such components through adherence to this and to other International Standards. For use in a system that does not include a BioAPI Framework (called a framework-free BioAPI system), only the SPI interface is applicable, with applications interfacing directly to that in a platform-specific manner. NOTE 1 Many clauses and/or sub-clauses of this document are not applicable for implementation of a framework-free BioAPI system. These are identified at the head of the clause of sub-clause. The BioAPI specification is applicable to a broad range of biometric technology types. It is also applicable to a wide variety of biometrically enabled applications, from personal devices, through network security applications, to large complex identification systems. ISO/IEC 19784-1:2018 supports an architecture in which a BioAPI Framework supports multiple simultaneous biometric applications (provided by different vendors), using multiple dynamically installed and loaded (or unloaded) Biometric Service Provider (BSP) components and BioAPI Units (provided by other different vendors), possibly using one of an alternative set of BioAPI Function Provider (BFP) components (provided by other vendors) or by direct management of BioAPI Units. NOTE 2 Where BioAPI Units are provided by a different vendor fom a BSP, a standardised BioAPI Function Provider Interface (FPI) may be needed. This is outside the scope of this document, but is specified by later parts for the different categories of FPI. NOTE 3 Where a BioAPI Framework is not used in a system, the ability to support multiple applications and multiple BSPs is platform-dependent and depends on the nature of the system-integration techniques employed. ISO/IEC 19784-1:2018 is not required (and should normally not be referenced) when a complete biometric system is being procured from a single vendor, particularly if the addition or interchange of biometric hardware, services, or applications is not a feature of that biometric system. (Such systems are sometimes referred to as "embedded systems".) Standardisation of such systems is not in the scope of this document. ISO/IEC 19784-1:2018 does not define security requirements for biometric applications and biometric service providers. NOTE 4 ISO 19092 provides guidelines on security aspects of biometric systems[3]. The performance of biometric systems (particularly in relation to searches of a large population to provide the biometric identification capability) is not in the scope of this document. Trade-offs between interoperability and performance are not in the scope of this document. ISO/IEC 19784-1:2018 specifies a version of the BioAPI specification that is defined to have a version number described as Major 2, Minor 0, or version 2.0. It also specifies a version number described as Major 2, Minor 1, or version 2.1 that provides an enhanced Graphical User Interface. It also specifies a version number described as Major 2, Minor 2, or version 2.2 that provides features supporting fusion and security. Some clauses and sub-clauses apply only to one of these versions, some to two or more. This is identified at the head of the relevant clauses and sub-clauses. NOTE 5 Earlier versions of the BioAPI specification were not International Standards. NOTE 6 The differences between the requirements of the 2.0 specification and the 2.1 specification for framework-free operation relate only to the biometric type values and encodings. Conformance requirements are specified in Clause 5.

Standard
234 pages
English language
sale 15% off

ISO

ISO/IEC 30136:2018(Main)

Information technology — Performance testing of biometric template protection schemes

ISO/IEC 30136:2018 supports evaluation of the accuracy, secrecy, and privacy of biometric template protection schemes. It establishes definitions, terminology, and metrics for stating the performance of such schemes. Particularly, this document establishes requirements for the measurement and reporting of: - theoretical and empirical accuracy of biometric template protection schemes, - theoretical and empirical probability of a successful attack on biometric template protection schemes (single or multiple), and - the information leaked about the original biometric when one or more biometric template protection schemes are compromised. ISO/IEC 30136:2018 also gives guidance on measuring and reporting diversity and unlinkability of templates. ISO/IEC 30136:2018 does not: - establish template protection schemes; - address testing of traditional encryption schemes.

Standard
23 pages
English language
sale 15% off

ISO

ISO/IEC 19794-13:2018(Main)

Information technology — Biometric data interchange formats — Part 13: Voice data

ISO/IEC 19794-13:2018 specifies a data interchange format that can be used for storing, recording, and transmitting digitized acoustic human voice data (speech) assumed to be from a single speaker recorded in a single session. This format is designed specifically to support a wide variety of Speaker Identification and Verification (SIV) applications, both text-dependent and text-independent, with minimal assumptions made regarding the voice data capture conditions or the collection environment. Other uses for the data encapsulated in this format, such as automated speech recognition (ASR), may be possible, but are not addressed in this documnet. This document also does not address handling of data that has been processed to the feature or voice model levels. No application-specific requirements, equipment, or features are addressed in this document. This document supports the optional inclusion of non-standardized extended data. This document allows both the original data captured and digitally-processed (enhanced) voice data to be exchanged. A description of any processing of the original source input is intended to be included in the metadata associated with the voice representations (VRs). This document does not address data streaming. Provisions that stored and transmitted biometric data be time-stamped and that cryptographic techniques be used to protect their authenticity, integrity and confidentiality are out of the scope of this document. Information formatted in accordance with this document can be recorded on machine-readable media or can be transmitted by data communication between systems. A general content-oriented subclause describing the voice data interchange format is followed by a subclause addressing an XML schema definition. ISO/IEC 19794-13:2018 includes vocabulary in common use by the speech and speaker recognition community, as well as terminology from other ISO standards.

Standard
26 pages
English language
sale 15% off

ISO

ISO/IEC TR 24741:2018(Main)

Information technology — Biometrics — Overview and application

ISO/IEC TR 24741:2018 describes the history of biometrics and what biometrics does, the various biometric technologies in general use today (for example, fingerprint recognition and face recognition) and the architecture of the systems and the system processes that allow automated recognition using those technologies. It also provides information about the application of biometrics in various business domains such as border management, law enforcement and driver licensing, the societal and jurisdiction considerations that are typically taken into account in biometric systems, and the international standards that underpin their use.

Technical report
33 pages
English language
sale 15% off

ISO

ISO/IEC 30107-2:2017(Main)

Information technology — Biometric presentation attack detection — Part 2: Data formats

ISO/IEC 30107-2:2017 defines data formats for conveying the mechanism used in biometric presentation attack detection and for conveying the results of presentation attack detection methods. The attacks considered in the ISO/IEC 30107 series take place at the sensor during the presentation and collection of the biometric characteristics. Any other attacks are outside the scope of this document. ISO/IEC 30107-2:2017 contains the following data formats: a binary format and an XML schema. The data interchange formats in this document are generic, in that they may be applied and used in a wide range of application areas. No application-specific requirements are addressed here. Provisions for the cryptographic protection of the authenticity, integrity, and confidentiality of stored and transmitted presentation attack detection data are beyond the scope of this document. NOTE While addressing security is out of the scope of this document, PAD data may be protected by encoding them into a biometric information record (see ISO/IEC 19785-1) that includes an optional security block.

Standard
17 pages
English language
sale 15% off