ISO 10303-505:2000

Industrial automation systems and integration — Product data representation and exchange — Part 505: Application interpreted construct: Drawing structure and administration

This part of ISO 10303 specifies the interpretation of the integrated resources to satisfy requirements for the definition of the hierarchical structure of drawings and the administration information to manage drawings and relate a product to the drawing. The following are within the scope of this part of ISO 10303: — the structures for representing a drawing that depicts any phase of design; — the structures for representing individual drawing revisions; — the hierarchical structure of drawings, drawing sheets, and views of the draughting shape model; — the administrative data used for the purpose of drawing management; — the administrative data identifying the product versions being documented by the drawing. The following are outside the scope of this part of ISO 10303: — the structures for representing drawings that are not related to a product; — the exchange of drawing history; NOTE - Drawing history refers to prior drawing revisions. — the exchange of data used exclusively for the creation of paper or hard copy versions of the drawing; EXAMPLE - Printer or plotter data can be pen designations, plot scale, or plot color specifications.

Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 505: Construction interprétée d'application: Structure et administration des desssins

General Information

• Status: Published
• Publication Date: 14-Jun-2000
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: ISO/TC 184/SC 4 - Industrial data
• Drafting Committee: ISO/TC 184/SC 4/WG 12 - STEP product modelling and resources
• Current Stage: 9060 - Close of review
• Start Date: 04-Mar-2029

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 10303-505
First edition
2000-06-15
Industrial automation systems and
integration — Product data representation
and exchange —
Part 505:
Application interpreted construct: Drawing
structure and administration
Systèmes d'automatisation industrielle et intégration — Représentation et
échange de données de produits —
Partie 505: Construction interprétée d'application: Structure et
administration des dessins
Reference number
ISO 10303-505:2000(E)
©
ISO 2000

---------------------- Page: 1 ----------------------
ISO 10303-505:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000–All rights reserved

---------------------- Page: 2 ----------------------
ISO 10303-505:2000(E)
Contents Page
1 Scope.1
2 Normative references.2
3 Terms, definitions and abbreviations .3
3.1 Terms defined in ISO 10209-1 .3
3.2 Terms defined in ISO 10303-1 .3
3.3 Terms defined in ISO 10303-46 .3
3.4 Terms defined in ISO 10303-101 .3
3.5 Terms defined in ISO 10303-202 .4
3.6 Abbreviations .4
4 EXPRESS short listing .5
4.1 Fundamental concepts and assumptions .6
4.2 aic_drawing_structure_and_administration type definitions .6
4.3 aic_drawing_structure_and_administration entity definitions .8
Annex A (normative) Short names of entities.17
Annex B (normative) Information object registration.18
B.1 Document identification .18
B.2 Schema identification .18
Annex C (informative) EXPRESS-G diagrams .19
Annex D (informative) Computer interpretable listings .34
Index.35
© ISO 2000 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 10303-505:2000(E)
Figures
Figure C.1 - EXPRESS-G diagram 1 of 14 .
...