Identification cards — Contactless integrated circuit(s) cards — Close-coupled cards — Part 1: Physical characteristics

This part of ISO/IEC 10536 specifies the physical characteristics of close-coupled cards (CICC). It applies to identification cards of the card type ID-1 operating either in a slot or on the surface of a coupling device. This part of ISO/IEC 10536 shall be used in conjunction with later parts of ISO/IEC 10536.

Cartes d'identification — Cartes à circuit(s) intégré(s) sans contact — Cartes à couplage rapproché — Partie 1: Caractéristiques physiques

La présente partie de l'ISO/CEI 10536 prescrit les caractéristiques physiques des cartes à couplage rapproché. Elle est applicable aux cartes d'identification de type ID-1 fonctionnant soit dans une fente soit à la surface d'un coupleur. L'utilisateur de la présente partie de l'ISO/CEI 10536 doit également se référer aux autres parties l'ISO/CEI 10536.

General Information

Status
Published
Publication Date
05-Apr-2000
Current Stage
9093 - International Standard confirmed
Completion Date
22-Mar-2006
Ref Project

Relations

Buy Standard

Standard
ISO/IEC 10536-1:2000 - Identification cards -- Contactless integrated circuit(s) cards -- Close-coupled cards
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO/IEC 10536-1:2000 - Cartes d'identification -- Cartes a circuit(s) intégré(s) sans contact -- Cartes a couplage rapproché
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 10536-1
Second edition
2000-04-15
Identification cards — Contactless
integrated circuit(s) cards — Close-coupled
cards —
Part 1:
Physical characteristics
Cartes d'identification — Cartes à circuit(s) intégré(s) sans contact —
Cartes à couplage de proximité —
Partie 1: Caractéristiques physiques
Reference number
ISO/IEC 10536-1:2000(E)
©
ISO/IEC 2000

---------------------- Page: 1 ----------------------
ISO/IEC 10536-1:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO/IEC 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO/IEC 2000 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 10536-1:2000(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in
liaison with ISO and IEC, also take part in the work.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO/IEC 10536 may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
International Standard ISO/IEC 10536-1 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC 17, Identification cards and related devices.
This second edition cancels and replaces the first edition (ISO/IEC 10536-1:1992), which has been technically
revised.
ISO/IEC 10536 consists of the following parts, under the general title Identification cards — Contactless integrated
circuit(s) cards — Close-coupled cards:
� Part 1: Physical characteristics
� Part 2: Dimensions and location of coupling areas
� Part 3: Electronic signals and reset procedures
� Part 4: Answer to reset and transmission protocols
Annexes A and B of this part of ISO/IEC 10536 are for information only.
© ISO/IEC 2000 – All rights reserved iii

---------------------- Page: 3 ----------------------
© ISO/IEC
ISO/IEC 10536-1:2000(E)
Introduction
ISO/IEC 10536 is one of a series of International Standards describing the parameters for identification cards as
defined in ISO/IEC 7810 and the use of such cards for international interchange.
This part of ISO/IEC 10536 describes the physical characteristics of close-coupled cards.
This part of ISO/IEC 10536 does not preclude the incorporation of other standard technologies on the card, such
as those referenced in the informative annex A.
Contactless card Standards cover a variety of types as embodied in ISO/IEC 10536 (Close-coupled cards),
ISO/IEC 14443 (Proximity cards), ISO/IEC 15693 (Vicinity cards). These are intended for operation when very
near, nearby and at a longer distance from associated coupling devices respectively.
ISO/IEC 10536 is intended to allow operation of Close-coupled cards in the presence of other contactless cards
conforming to ISO/IEC 14443 and ISO/IEC 15693 standards.
iv

---------------------- Page: 4 ----------------------
©
INTERNATIONAL STANDARD ISO/IEC ISO/IEC 10536-1:2000(E)
Identification cards — Contactless integrated circuit(s) cards —
Close-coupled cards — Part 1: Physical characteristics
1 Scope
This part of ISO/IEC 10536 specifies the physical characteristics of close-coupled cards (CICC). It applies to
identification cards of the card type ID-1 operating either in a slot or on the surface of a coupling device.
This part of ISO/IEC 10536 shall be used in conjunction with later parts of ISO/IEC 10536.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this part of ISO/IEC 10536. For dated references, subsequent amendments to, or revisions of, any of these
publications do not apply. However, parties to agreements based on this part of ISO/IEC 10536 are encouraged to
investigate the possibility of applying the most recent editions of the normative documents indicated below. For
undated references, the latest edition
...

NORME ISO/CEI
INTERNATIONALE 10536-1
Deuxième édition
2000-04-15


Cartes d'identification — Cartes à circuit(s)
intégré(s) sans contact — Cartes à
couplage rapproché —
Partie 1:
Caractéristiques physiques
Identification cards — Contactless integrated circuit(s) cards —
Close-coupled cards —
Part 1: Physical characteristics




Numéro de référence
ISO/CEI 10536-1:2000(F)
©
ISO/CEI 2000

---------------------- Page: 1 ----------------------
ISO/CEI 10536-1:2000(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier peut
être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence autorisant
l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées acceptent de fait la
responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute responsabilité en la
matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation de
ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer le
Secrétariat central à l'adresse donnée ci-dessous.


©  ISO/CEI 2000
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque
forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l’ISO à
l’adresse ci-après ou du comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Version française parue en 2002
Imprimé en Suisse

ii © ISO/CEI 2000 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO/CEI 10536-1:2000(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) et la CEI (Commission électrotechnique internationale)
forment le système spécialisé de la normalisation mondiale. Les organismes nationaux membres de l'ISO ou de la
CEI participent au développement de Normes internationales par l'intermédiaire des comités techniques créés par
l'organisation concernée afin de s'occuper des domaines particuliers de l'activité technique. Les comités
techniques de l'ISO et de la CEI collaborent dans des domaines d'intérêt commun. D'autres organisations
internationales, gouvernementales et non gouvernementales, en liaison avec l'ISO et la CEI participent également
aux travaux.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 3.
Dans le domaine des technologies de l'information, l'ISO et la CEI ont créé un comité technique mixte,
l'ISO/CEI JTC 1. Les projets de Normes internationales adoptés par le comité technique mixte sont soumis aux
organismes nationaux pour vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au
moins des organismes nationaux votants.
L'attention est appelée sur le fait que certains des éléments de la présente partie de l'ISO/CEI 10536 peuvent faire
l'objet de droits de propriété intellectuelle ou de droits analogues. L'ISO et la CEI ne sauraient être tenues pour
responsables de ne pas avoir identifié de tels droits de propriété et averti de leur existence.
La Norme internationale ISO/CEI 10536-1 a été élaborée par le comité technique mixte ISO/CEI JTC 1,
Technologies de l'information, sous-comité SC 17, Cartes d'identification et dispositifs associés.
Cette deuxième édition annule et remplace la première édition (ISO/CEI 10536-1:1992), qui a fait l'objet d'une
révision technique.
L'ISO/CEI 10536 comprend les parties suivantes, présentées sous le titre général Cartes d'identification — Cartes
à circuit(s) intégré(s) sans contact — Cartes à couplage rapproché:
 Partie 1: Caractéristiques physiques
 Partie 2: Dimensions et emplacement des surfaces de couplage
 Partie 3: Signaux électroniques et modes de remise à zéro
 Partie 4: Réponse à la remise à zéro et protocoles de transmission
Les annexes A et B de la présente partie de l'ISO/CEI 10536 sont données uniquement à titre d'information.
© ISO/CEI 2000 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO/CEI 10536-1:2000(F)
Introduction
L’ISO/CEI 10536 fait partie d’une série de Normes internationales qui décrivent les paramètres des cartes
d’identification, tels qu’ils sont définis dans l’ISO/CEI 7810, et l’utilisation de ces cartes pour les échanges
internationaux.
La présente partie de l’ISO/CEI 10536 décrit les caractéristiques physiques des cartes à couplage rapproché.
Elle n’exclut pas l’intégration à ces cartes d’autres technologies normalisées, comme celles mentionnées dans
l’annexe A informative.
Les technologies normalisées concernant les cartes sans contact recouvrent différents types de cartes, comme le
montrent l’ISO/CEI 10536 (cartes à couplage rapproché), l’ISO/CEI 14443 (cartes de proximité) et l’ISO/CEI 15693
(cartes de voisinage). Ces cartes sont à utiliser respectivement à proximité immédiate, à proximité et à une
certaine distance des coupleurs associés.
L’ISO/CEI 10536 a pour objet de permettre le fonctionnement des cartes à couplage rapproché en présence
d’autres cartes sans contact conformes à l’ISO/CEI 14443 et à l’ISO/CEI 15693.
iv © ISO/CEI 2000 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO/CEI 10536-1:2000(F)

Cartes d'identification — Cartes à circuit(s) intégré(s) sans
contact — Cartes à couplage rapproché — Partie 1:
Caractéristiques physiques
1 Domaine d'application
La présente partie de l’ISO/CEI 10536 prescrit les caractéristiques physiques des cartes à couplage rapproché.
Elle est applicable aux cartes d’identification de type ID-1 fonctionnant soit dans une fente soit à la surface d’un
coupleur.
L’utilisateur de la présente partie de l’ISO/CEI 10536 doit également se référer aux autres parties l'ISO/CEI 10536.
2 Références normatives
Les documents normatifs suivants contiennent des dispositions qui, par suite de la référence qui y est faite,
constituent des dispositions valables pour la présente partie de l'ISO/CEI 10536. Pour les références datées, les
amendements ultérieurs ou les révisions de ces publications ne s’appliquent pas. Toutefois, les parties prenantes
aux accords fondés sur la présente partie de l'ISO/CEI 10536 sont invitées à rechercher la possibilité d'appliquer
les éditions les plus récentes des documents normatifs indiqués ci-après. Pour les références non datées, l
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.