Leather — Physical and mechanical tests — Determination of softness

ISO 17235:2002 specifies a non-destructive method for determining the softness of a leather. It is applicable to all non-rigid leathers, e.g. shoe upper leather, upholstery leather, leathergoods leather and apparel leather.

Cuir — Essais physiques et mécaniques — Détermination de la souplesse

L'ISO 17235:2002 spécifie une méthode non destructive pour déterminer la souplesse d'un cuir. Elle s'applique à tous les cuirs légers, par exemple cuirs à dessus de chaussure, cuirs de garniture, cuirs d'articles de maroquinerie, cuirs pour vêtements et gants.

General Information

Status
Withdrawn
Publication Date
04-Dec-2002
Withdrawal Date
04-Dec-2002
Current Stage
9599 - Withdrawal of International Standard
Completion Date
29-Nov-2011
Ref Project

Relations

Buy Standard

Standard
ISO 17235:2002 - Leather -- Physical and mechanical tests -- Determination of softness
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 17235:2002 - Cuir -- Essais physiques et mécaniques -- Détermination de la souplesse
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 17235
IULTCS/IUP
36
First edition
2002-12-15


Leather — Physical and mechanical
tests — Determination of softness
Cuir — Essais physiques et mécaniques — Détermination de la souplesse





Reference number
ISO 17235:2002(E)
IULTCS/IUP 36
©
 ISO 2002

---------------------- Page: 1 ----------------------
ISO 17235:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2002 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 17235:2002(E)
Contents
Page
Foreword . iv

1 Scope .1
2 Normative references .1
3 Principle.1
4 Apparatus .1
5 Sampling and sample preparation .2
6 Procedure .2
7 Test report .3
Annex A (informative) Sources of apparatus .4
© ISO 2002 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 17235:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted
by the technical committees are circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17235 was prepared by the Physical Test Commission of the International Union of Leather Technologists and
Chemists Societies (IUP Commission, IULTCS) in collaboration with the European Committee for Standardization
(CEN) Technical Committee CEN/TC 289, Leather, the secretariat of which is held by UNI, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement). It is based on IUP 36 originally
published in J. Soc. Leather Tech. Chem. 78, p. 66, (1994) and declared an official method of the IULTCS in 1995.
An updated version was published in J. Soc. Leather Tech. Chem. 82, p. 238, (1998) and a further revision was
published in J. Soc. Leather Tech. Chem. 84, p. 377, (2000) and reconfirmed as an official method in March 2001.
This latest revision has an alteration in th
...

NORME ISO
INTERNATIONALE 17235
IULTCS/IUP
36
Première édition
2002-12-15


Cuir — Essais physiques et mécaniques —
Détermination de la souplesse
Leather — Physical and mechanical tests — Determination of softness





Numéro de référence
ISO 17235:2002(F)
IULTCS/IUP 36
©
 ISO 2002

---------------------- Page: 1 ----------------------
ISO 17235:2002(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier peut
être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence autorisant
l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées acceptent de fait la
responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute responsabilité en la
matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation de
ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer le
Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2002
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque
forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l’ISO à
l’adresse ci-après ou du comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2002 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 17235:2002(F)
Sommaire
Page
Avant-propos . iv

1 Domaine d'application.1

2 Références normatives .1
3 Principe.1
4 Appareillage.1
5 Echantillonnage et préparation des éprouvettes .2
6 Mode opératoire .2
7 Rapport d'essai .3
Annexe A (informative) Origines de l'appareillage.4
© ISO 2002 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 17235:2002(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée aux
comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en
liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec la Commission
électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l'approbation de 75 % au moins des comités membres votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de droits de
propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne pas avoir
identifié de tels droits de propriété et averti de leur existence.
L'ISO 17235 a été élaborée par la Commission des essais physiques de l'Union internationale des sociétés de
techniciens et chimistes du cuir (commission IUP, IULTCS) en collaboration avec le comité technique du Comité
européen de normalisation (CEN) CEN/TC 289, Cuir, dont le secrétariat est tenu par l'UNI, conformément à
l'Accord de coopération technique entre l'ISO et le CEN (Accord de Vienne). Elle est fondée sur de document
IUP 36, qui a été à l'origine publié dans J. Soc. Leather Tech. Chem. 78, p. 66, (1994) et confirmée méthode
officielle en 1995. Une version révisée a été publiée dans J. Soc. Leather Tech. Chem. 82, p. 238, (1998) et une
version révisée ultérieure a été publiée dans J. Soc. Leather Tech. Chem. 84, p. 377, (2000) et confirmée méthode
officielle en mars 2001. Cette dernière révision comprend une modification dans l'annexe portant sur le domaine et
le nom du fournisseur.

iv © ISO 2002 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.