IEC/PAS 60092-510:2009
(Main)Electrical installations in ships — Special features — High Voltage Shore Connection Systems (HVSC-Systems) — Part 510:
Electrical installations in ships — Special features — High Voltage Shore Connection Systems (HVSC-Systems) — Part 510:
IEC/PAS 60092-510:2009(E) describes high-voltage shore connection (HVSC)-Systems, on board the ship and on shore, to supply the ship with electrical power from shore during the port lay period. This PAS is applicable to the specification, installation and testing of HVSC- Systems and plants and addresses: - high-voltage shore distribution system, - shore-to-ship connection, - transformers/reactors, - semiconductor convertors and rotating convertors, - ship distribution system, and - control, monitoring, interlocking and power management system. This PAS has been prepared in cooperation with ISO technical committee 8: Ships and marine technology, Subcommittee 3: Piping and machinery.
Titre manque — Partie 510:
General Information
Relations
Standards Content (Sample)
IEC/PAS 60092-510
Edition 1.0 2009-04
PUBLICLY AVAILABLE
SPECIFICATION
PRE-STANDARD
Electrical installations in ships –
Part 510: Special features – High-voltage shore connection systems
IEC/PAS 60092-510:2009(E)
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2009 IEC, Geneva, Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
---------------------- Page: 2 ----------------------
IEC/PAS 60092-510
Edition 1.0 2009-04
PUBLICLY AVAILABLE
SPECIFICATION
PRE-STANDARD
Electrical installations in ships –
Part 510: Special features – High-voltage shore connection systems
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XC
ICS47.020.60 ISBN 2-8318-1040-5
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 3 ----------------------
– 2 – PAS 60092-510 © IEC:2009(E)
CONTENTS
FOREWORD.10
INTRODUCTION.12
1 Scope.13
2 Normative references .13
3 Terms and definitions .15
SECTION ONE – GENERAL REQUIREMENTS .16
4 System .16
4.1 System description .16
4.2 Distribution system.17
4.2.1 General .17
4.2.2 Equipotential bonding .17
4.2.3 Electrochemical corrosion.17
4.3 Compatibility assessment before connection .17
4.4 System integration and management.18
4.4.1 During installation.18
4.5 Personnel safety .18
4.6 Design requirements .18
4.6.1 General .18
4.6.2 Protection against moisture and condensation.19
4.6.3 Location and construction.19
4.7 Electrical requirements.20
4.8 System study and calculations.20
4.9 Emergency shutdown including emergency stop facilities .20
SECTION TWO – SHORE REQUIREMENTS .22
5 HV-shore supply system .22
5.1 Current Inrush .22
5.2 Voltages and frequencies .22
5.3 Quality of HV-shore power supply .22
6 Installation.23
6.1 General .23
6.2 Components and system requirements .23
6.2.1 Combination circuit breaker, disconnector and earthing switch .23
6.2.2 Transformer.23
6.3 Protection system.24
6.4 High-voltage (HV) interlocking concept.24
6.4.1 Access .24
6.4.2 Operating of the high-voltage (HV) circuit-breakers, disconnectors
and earthing switches.25
6.5 Shore-connection convertor equipment .25
6.5.1 Degree of protection .26
6.5.2 Cooling.26
6.5.3 Protection.26
---------------------- Page: 4 ----------------------
PAS 60092-510 © IEC:2009(E) – 3 –
SECTION THREE – SHIP-TO-SHORE CONNECTION AND INTERFACE EQUIPMENT .27
7 General .27
7.1 Ship-to-shore connection and interface equipment .27
7.1.1 Cable management system.27
7.2 Plugs and socket-outlets .28
7.2.1 General .28
7.2.2 Pilot contacts.29
7.3 Interlocking of earthing switches .29
7.3.1 Earth contact .30
7.4 Ship-to-shore connection cable .30
7.5 Control and monitoring cable.30
7.5.1 General .30
7.5.2 Control and monitoring plugs and socket-outlets.30
7.5.3 Data communication .30
7.6 Storage .30
SECTION FOUR – SHIP REQUIREMENTS.31
8 Installation.31
8.1 General .31
8.2 Ship-electrical-distribution-system protection.31
8.3 Connection switchboard .31
8.3.1 Combination circuit breaker, disconnector and earthing switch .31
8.4 Connection-switchboard instrumentation and protection .32
8.5 On-board transformer .32
8.6 Receiving switchboard connection point .32
8.6.1 Shore-connection circuit breaker .32
8.6.2 Connection point instrumentation.33
8.6.3 Connection point protection .33
8.6.4 Operation of the shore-connection circuit-breaker.34
8.7 Ship power restoration .34
9 HVSC-System control and monitoring.35
9.1 General requirements.35
9.2 Load transfer via black out .35
9.3 Temporary parallel connection for load transfer .35
9.3.1 General .35
9.3.2 Protection requirements.36
SECTION FIVE – VERIFICATION AND TESTING.36
10 Initial tests.36
10.1 General .36
10.2 Initial tests of shore side installation.36
10.2.1 General .36
10.2.2 Tests .36
10.3 Initial tests of ship side installation .37
10.3.1 General .37
10.3.2 Tests .37
10.4 Tests at the first call at a shore supply point.37
10.4.1 General .37
10.4.2 Tests .37
---------------------- Page: 5 ----------------------
– 4 – PAS 60092-510 © IEC:2009(E)
11 Periodic tests and maintenance.38
11.1 General .38
11.2 Tests at repeated calls of a shore supply point .38
11.2.1 General .38
11.2.2 Verification .38
12 Documentation .38
12.1 General .38
12.2 System description .39
Annex A (normative) Plugs and socket-outlets .40
A.1 Test specimen .40
A.2 Type testing of plugs and socket-outlets.41
A.3 Coding and specification of plugs and socket-outlets.41
A.4 Fibre optical plug/socket.42
Annex B (normative) Ship-to-shore connection cable .44
B.1 Rated voltage .44
B.2 General design requirements.44
B.2.1 Conductors.44
B.2.2 Material .44
B.2.3 Screening.44
B.2.4 Earth conductors .45
B.2.5 Pilot element with rated voltage U /U (U ) = 150/250 (300) V .45
o m
B.2.6 Optical fibres.45
B.2.7 Cabling.45
B.2.8 Separator tape .45
B.2.9 Non-metallic outer sheath.45
B.2.10 Markings .46
B.3 Tests on complete cables .46
Annex C (normative) Additional requirements for ships with low voltage distribution
systems.48
C.1 Scope.48
C.2 Normative references .48
C.3 Terms and definitions .48
SECTION ONE – GENERAL REQUIREMENTS .48
C.4 System .48
C.4.1 System description .48
C.4.2 Distribution system.49
C.4.3 Compatibility assessment before connection .49
C.4.4 System integration and management.49
C.4.5 Personnel safety .49
C.4.6 Design requirements .49
C.4.7 Electrical requirements.49
C.4.8 System study and calculations.49
SECTION TWO – SHORE REQUIREMENTS .49
C.5 HV-shore supply system .49
---------------------- Page: 6 ----------------------
PAS 60092-510 © IEC:2009(E) – 5 –
C.5.1 Current Inrush .49
C.5.2 Voltages and frequencies .49
C.5.3 Quality of HV-shore power supply .49
C.6 Installation.50
C.6.1 General .50
C.6.2 Components and system requirements .50
C.6.3 Protection system.50
C.6.4 High-voltage interlocking concept .50
C.6.5 Shore-connection convertor equipment .50
SECTION THREE – SHORE-TO-SHIP CONNECTION AND INTERFACE EQUIPMENT .50
C.7 General .50
C.7.1 Shore-to-ship connection and interface equipment .50
C.7.2 Plugs and socket-outlets .50
C.7.3 Interlocking of earthing switchs .51
C.7.4 Ship-to-shore connection cable .51
C.7.5 Control and monitoring cable.51
C.7.6 Storage .53
SECTION FOUR – SHIP REQUIREMENTS.53
C.8 Installation.53
C.8.1 General .53
C.8.2 Ship-electrical-distribution-system protection.54
C.8.3 Connection switchboard .54
C.8.4 Connection-switchboard instrumentation and protection .54
C.8.5 On-board transformer .54
C.8.6 Receiving switchboard connection point .54
C.8.7 Emergency-stop switches and shutdown conditions.54
C.8.8 On board short-circuit current limits.54
C.9 HVSC-System control and monitoring.54
C.9.1 General requirements.54
C.9.2 Dead-transfer .54
C.9.3 Temporary parallel connection for load transfer .54
SECTION FIVE – VERIFICATION AND TESTING.55
C.10 Tests of completed installation .55
C.11 Tests after commissioning.55
C.12 Documentation .55
Annex D (normative) Additional requirements for cruise ships.56
D.1 Scope.56
D.2 Normative references .56
D.3 Terms and definitions. .56
SECTION ONE – GENERAL REQUIREMENTS .56
D.4 System .56
D.4.1 System description .56
D.4.2 Distribution system.57
D.4.3 Compatibility assessment before connection .57
---------------------- Page: 7 ----------------------
– 6 – PAS 60092-510 © IEC:2009(E)
D.4.4 System integration and management.57
D.4.5 Personnel safety .58
D.4.6 Design requirements .58
D.4.7 Electrical requirements.58
D.4.8 System study and calculations.58
SECTION TWO – SHORE REQUIREMENTS .58
D.5 HV-shore supply system .58
D.6 Installation.58
SECTION THREE – SHIP-TO-SHORE CONNECTION AND INTERFACE EQUIPMENT .59
D.7 General .59
D.7.1 Ship-to-shore connection and interface equipment .59
D.7.2 Plugs and socket-outlets .59
D.7.3 Interlocking of earthing switches .61
D.7.4 Ship-to-shore connection cable .61
D.7.5 Control and monitoring cable.61
D.7.6 Storage .61
SECTION FOUR – SHIP REQUIREMENTS.61
D.8 Installation.61
D.9 HVSC-System control and monitoring.61
SECTION FIVE – VERIFICATION AND TESTING.61
D.10 Tests of completed installation .61
D.11 Tests after commissioning.62
D.11.1 General .62
D.11.2 Operational tests .62
D.12 Documentation .62
D.12.1 General .62
D.12.2 Circuit diagrams .62
Annex E (normative) Additional requirements of container vessels.63
E.1 Scope.63
E.2 Normative references .63
E.3 Terms and definitions .63
SECTION ONE – GENERAL REQUIREMENTS .63
E.4 System .63
E.4.1 System description .63
E.4.2 Distribution system.64
E.4.3 Compatibility assessment before connection .64
E.4.4 System integration and management.64
E.4.5 Personnel safety .64
E.4.6 Design requirements .64
E.4.7 Electrical requirements.64
E.4.8 System study and calculations.64
E.4.9 Emergency-stop switches and shutdown conditions.64
---------------------- Page: 8 ----------------------
PAS 60092-510 © IEC:2009(E) – 7 –
SECTION TWO – SHORE REQUIREMENTS .64
E.5 HV-shore supply system .64
E.5.1 Current Inrush .64
E.5.2 Voltages and frequencies .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.