ISO/IEC 19823-11

Information technology — Conformance test methods for security service crypto suites — Part 11: Crypto suite PRESENT-80

This document specifies methods for determining conformance to the security crypto suite defined in ISO/IEC 29167-11. This document contains conformance tests for all mandatory functions. The conformance parameters are the following: — parameters that apply directly affecting system functionality and inter-operability; — protocol including commands and replies; — nominal values and tolerances. Unless otherwise specified, the tests in this document are intended to be applied exclusively to RFID tags and interrogators defined in the ISO/IEC 18000 series using ISO/IEC 29167-11.

Technologies de l'information — Méthodes d'essai de conformité pour les suites cryptographiques des services de sécurité — Partie 11: Suite cryptographique PRESENT-80

General Information

• Status: Not Published
• ICS: 35.030 - IT Security
• Technical Committee: ISO/IEC JTC 1/SC 31 - Automatic identification and data capture techniques
• Drafting Committee: ISO/IEC JTC 1/SC 31/WG 4 - Radio communications
• Current Stage: 6000 - International Standard under publication
• Start Date: 23-Aug-2025
• Completion Date: 06-Sep-2025

Relations

• Revises: ISO/IEC 19823-11:2022 - Information technology — Conformance test methods for security service crypto suites — Part 11: Crypto suite PRESENT-80
• Effective Date: 03-Feb-2024

Standards Content (Sample)

FINAL DRAFT
International
Standard
ISO/IEC
FDIS
19823-11
ISO/IEC JTC 1/SC 31
Information technology —
Secretariat: ANSI
Conformance test methods for
Voting begins on:
security service crypto suites —
2025-06-27
Part 11:
Voting terminates on:
2025-08-22
Crypto suite PRESENT-80
Technologies de l'information — Méthodes d'essai de conformité
pour les suites cryptographiques des services de sécurité —
Partie 11: Suite cryptographique PRESENT-80
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/IEC FDIS 19823­11:2025(en) © ISO/IEC 2025

FINAL DRAFT
ISO/IEC FDIS 19823-11:2025(en)
International
Standard
ISO/IEC
FDIS
19823-11
ISO/IEC JTC 1/SC 31
Information technology —
Secretariat: ANSI
Conformance test methods for
Voting begins on:
security service crypto suites —
Part 11:
Voting terminates on:
Crypto suite PRESENT-80
Technologies de l'information — Méthodes d'essai de conformité
pour les suites cryptographiques des services de sécurité —
Partie 11: Suite cryptographique PRESENT-80
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO/IEC 2025
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/IEC FDIS 19823­11:2025(en) © ISO/IEC 2025

© ISO/IEC 2025 – All rights reserved
ii
ISO/IEC FDIS 19823-11:2025(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test methods . 2
4.1 General .2
4.2 By demonstration .2
4.3 By design .2
5 Test requirements for ISO/IEC 18000-63 interrogators and tags . 2
6 Test methods with respect to ISO/IEC 29167-11 interrogators and tags. 2
6.1 Test map for optional features .2
6.2 Crypto suite requirements .3
6.2.1 General .3
6.2.2 Crypto suite requirements of ISO/IEC 29167-11, Clauses 1 to 8 and Annexes A – C.3
6.2.3 Crypto suite requirements of ISO/IEC 29167-11, Clauses 9 to 11 and Annex E .3
6.3 Test patterns . .7
6.3.1 General .7
6.3.2 Test Pattern 1 .8
6.3.3 Test Pattern 2 .8
6.3.4 Test Pattern 3 .8
6.3.5 Test pattern 4 .9
Bibliography .10

© ISO/IEC 2025 – All rights reserved
iii
ISO/IEC FDIS 19823-11:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 31, Automatic identification and data capture techniques.
This second edition cancels and replaces the first edition (ISO/IEC 19823-11:2022), which has been
technically revised.
The main changes are as follows:
— Test item 62 has been updated to reflect changes to the over-the-air protocol.
A list of all parts in the ISO/IEC 19823 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

© ISO/IEC 2025 – All rights reserved
iv
ISO/IEC FDIS 19823-11:2025(en)
Introduction
The ISO/IEC 29167 series describes security services as applicable for the ISO/IEC 18000 series. The
various parts of ISO/IEC 29167 describe crypto suites that are optional extensions to the ISO/IEC 18000 air
interfaces.
The ISO/IEC 19823 series describes the conformance test methods for security service crypto suites. It is
related to the ISO/IEC 18047 series, which describes the radio frequency identification device conformance
test methods, in the same way as ISO/IEC 29167 is related to ISO/IEC 18000.
These relations mean that, for a product that is claimed to be compliant to a pair of ISO/IEC 18000-n and
ISO/IEC 29167-m, the test methods of ISO/IEC 18047-n and ISO/IEC 19823-m apply. If a product supports more
than one part of ISO/IEC 18000 or ISO/IEC 29167, all related parts of ISO/IEC 18047 and ISO/IEC 19823 apply.
NOTE 1 The conformance test requirements of ISO/IEC 18000-6, ISO/IEC 18000-61, ISO/IEC 18000-62,
ISO/IEC 18000-63, ISO/IEC 18000-64 are currently all in ISO/IEC 18047-6.
This document describes the test methods for the PRESENT-80 crypto suite as standardized in
ISO/IEC 29167-11.
NOTE 2 Test methods for interrogator and tag performance are covered by ISO/IEC 18046 (all parts).

© ISO/IEC 2025 – All rights reserved
v
FINAL DRAFT International Standard ISO/IEC FDIS 19823-11:2025(en)
Information technology — Conformance test methods for
security service crypto suites —
Part 11:
Crypto suite PRESENT-80
1 Scope
This document specifies methods for determining conformance to the security crypto suite defined in
ISO/IEC 29167-11.
This document contains conformance tests for all mandatory functions.
Unless otherwise specified, the tests in this document are intended to be applied exclusively to RFID tags
and interrogators defined in the ISO/IEC 18000 series using ISO/IEC 29167-11.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories
ISO/IEC 18000-63, Information technology — Radio frequency identification for item management — Part 63:
Parameters for air interface communications at 860 MHz to 960 MHz Type C
ISO/IEC 18047-6:2017, Information technology — Radio frequency identification device conformance test
methods — Part 6: Test methods for air interface communications at 860 MHz to 930 MHz
ISO/IEC 19762, Information technology — Automatic identification and data capture (AIDC) techniques —
Vocabulary
ISO/IEC 29167-11, Information technology — Automatic identification and data capture techniques — Part 11:
Crypto suite PRESENT-80 security services for air interface communications
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/IEC 19762 and in
ISO/IEC 29167-11 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/

© ISO/IEC 2025 – All rights reserved
ISO/IEC FDIS 19823-11:2025(en)
4 Test methods
4.1 General
This document describes test methods for ISO/IEC 29167-11. As parts of ISO/IEC 19823 are always tested in
relation to ISO/IEC 18047, duplication of information requirements and specifications is meant to be avoided.
Clause 5 defines elements that are covered in the respective part of the ISO/IEC 18047 series.
Clause 6 defines elements that are not covered by the ISO/IEC 18047 series and are therefore addressed in
this document.
4.2 By demonstration
If tests are labelled “by demonstration” then laboratory testing of one or (if required for statistical reasons)
multiple products, processes or services is required to ensure conformance. A test laboratory that meets the
requirements of ISO/IEC 17025 shall perform the indicated testing to ensure conformance of the component
or system.
For protocol requirements that are verified by demonstration, the test condi
...

Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
ISO/IEC FDIS 19823-11:2025(en) .
Style Definition
...
ISO/IEC JTC 1/SC 31
Style Definition
...
Style Definition
...
Secretariat: ANSI
Style Definition
...
Style Definition
Date: 2025-xx .
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Information technology — Conformance test methods for security
Style Definition
...
service crypto suites —
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Part 11:
Style Definition
...
Crypto suite PRESENT-80
Style Definition
...
Style Definition
...
Technologies de l'information — — Méthodes d'essai de conformité pour les suites cryptographiques des
services de sécurité — — Style Definition
...
Style Definition
...
Partie 11: Suite cryptographique PRESENT-80
Style Definition
...
Style Definition
...
Second edition
Style Definition
...
Date: 2025-04-10 Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Formatted
...
Formatted
...
Formatted
...
Formatted
...
Formatted
...
Formatted
...
Formatted
...
FDIS stage
ISO/IEC FDIS 19823-11:2025(en) Formatted: Font: Bold, English (United Kingdom)
Formatted: Font: Bold
Formatted: HeaderCentered, Left
© ISO/IEC 2025
Commented [eXtyles1]: Not found: "ISO/IEC 2025"
Commented [eXtyles2]: Not found: "ISO/IEC 2025"
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
Formatted: Default Paragraph Font
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
Formatted: Default Paragraph Font
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO'sISO’s member body in the country of the requester.
Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers
ISO Copyright Officecopyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva Formatted: zzCopyright address, Adjust space between Latin
and Asian text, Adjust space between Asian text and numbers
Phone: + 41 22 749 01 11
Formatted: French (France)
Email: [e-mail]
E-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Commented [eXtyles3]: The URL https://www.iso.org/ has
been redirected to https://www.iso.org/home.html. Please verify the
URL.
Published in Switzerland.
Formatted: zzCopyright address, Adjust space between Latin
and Asian text, Adjust space between Asian text and numbers

Formatted: Font: 10 pt
Formatted: FooterCentered, Left, Space Before: 0 pt, Tab
stops: Not at 17.2 cm
Formatted: Font: 11 pt
Formatted: FooterPageRomanNumber, Left, Space After: 0
pt, Tab stops: Not at 17.2 cm
© ISO/IEC 2025 – All rights reserved
iii
ISO/IEC FDIS 19823-11:2022(E2025(en) Formatted: Font: Bold
Formatted: Font: Bold
Formatted: Font: Bold
Contents Page Formatted: HeaderCentered
Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers, Tab stops: Not
Foreword . v
at 0.71 cm
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test methods . 2
4.1 General. 2
4.2 By demonstration . 2
4.3 By design . 2
5 Test requirements for ISO/IEC 18000-63 interrogators and tags . 2
6 Test methods with respect to ISO/IEC 29167-11 interrogators and tags . 3
6.1 Test map for optional features . 3
6.2 Crypto suite requirements . 3
6.3 Test patterns . 8
Bibliography . 12

1 Scope . 1
2 Normative references . 1
3 Terms, definitions, symbols and abbreviated terms . 2
4 Test methods . 2
4.1 General. 2
4.2 By demonstration . 2
4.3 By design . 2
5 Test requirements for ISO/IEC 18000-63 interrogators and tags . 2
6 Test methods with respect to ISO/IEC 29167-11 interrogators and tags . 3
6.1 Test map for optional features . 3
6.2 Crypto suite requirements . 3
6.2.1 General. 3
6.2.2 Crypto suite requirements of ISO/IEC 29167-11, Clauses 1 to 8 and Annexes A – C . 3
6.2.3 Crypto suite requirements of ISO/IEC 29167-11, Clauses 9 to 11 and Annex E . 3
6.3 Test patterns . 8
6.3.1 General. 8
6.3.2 Test Pattern 1 . 8
6.3.3 Test Pattern 2 . 8
6.3.4 Test Pattern 3 . 9
6.3.5 Test Pattern 4 . 9
Formatted: English (United Kingdom)
Formatted: FooterPageRomanNumber
© ISO/IEC 2022 – All rights reserved
© ISO/IEC 2025 – All rights reserved
iv
ISO/IEC FDIS 19823-11:2025(en) Formatted: Font: Bold, English (United Kingdom)
Formatted: Font: Bold
Formatted: HeaderCentered, Left
Foreword Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for is a worldwide standardization. Nationalfederation of national
standards bodies that are members of ISO or IEC participate in the development of(ISO member bodies). The
work of preparing International Standards is normally carried out through ISO technical committees. Each
member body interested in a subject for which a technical committee has been established by the respective
organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate
in fields of mutual interest. Other international has the right to be represented on that committee.
International organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part
in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters
Commented [eXtyles4]: URL Validation failed:
of electrotechnical standardization.
https://www.iec.ch/members_experts/refdocs returns an unknown
connection failure. (connection error "Error 12029:
The procedures used to develop this document and those intended for its further maintenance are described ERROR_INTERNET_CANNOT_CONNECT").
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
Commented [eXtyles5]: The URL
ISO document should be noted. This document was drafted in accordance with the editorial rules of the https://www.iso.org/iso/foreword.html has been redirected to
http://www.iso.org/foreword-supplementary-information.html. Please
ISO/IEC Directives, Part 2 (see www.iso.org/directives or
verify the URL.
www.iec.ch/members_experts/refdocs).www.iso.org/directives).
Commented [eXtyles6]: URL Validation failed:
https://www.iec.ch/understanding-standards returns an unknown
ISO and IEC drawdraws attention to the possibility that the implementation of this document may involve the
connection failure. (connection error "Error 12029:
ERROR_INTERNET_CANNOT_CONNECT").
use of (a) patent(s). ISO and IEC taketakes no position concerning the evidence, validity or applicability of any
Commented [eXtyles7]: Invalid reference: "ISO/IEC JTC 1"
claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had not
received notice of (a) patent(s) which may be required to implement this document. However, implementers
Commented [eXtyles8]: Invalid reference: "ISO/IEC JTC 1"
are cautioned that this may not represent the latest information, which may be obtained from the patent
Formatted: Default Paragraph Font
database available at www.iso.org/patents and https://patents.iec.ch. ISO and IECwww.iso.org/patents. ISO
Formatted: Default Paragraph Font
shall not be held responsible for identifying any or all such patent rights.
Formatted: Default Paragraph Font
Formatted: Default Paragraph Font
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement. Formatted: Default Paragraph Font
Formatted: Default Paragraph Font
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
Formatted: Adjust space between Latin and Asian text,
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Adjust space between Asian text and numbers, Tab stops: Not
at 0.7 cm + 1.4 cm + 2.1 cm + 2.8 cm + 3.5 cm + 4.2
Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html.
cm + 4.9 cm + 5.6 cm + 6.3 cm + 7 cm
In the IEC, see www.iec.ch/understanding-standards.), see www.iso.org/iso/foreword.html.
Commented [eXtyles9]: Invalid reference: "ISO/IEC 19823
series"
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Commented [eXtyles10]: Invalid reference: "ISO/IEC 19823
Subcommittee SC 31, Automatic identification and data capture techniques.
series"
Formatted: Default Paragraph Font
This second edition cancels and replaces the first edition (ISO/IEC 19823-11:2022), which has been
technically revised. Formatted: Default Paragraph Font
Formatted: Default Paragraph Font
The main changes are as follows:
Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers
— — Test item 62 has been updated to reflect changes to the over-the-air protocol.
Commented [eXtyles11]: The URL
https://www.iso.org/members.html has been redirected to
http://www.iso.org/about/members. Please verify the URL.
A list of all parts in the ISO/IEC 19823 series can be found on the ISO and IEC websites.
Commented [eXtyles12]: URL Validation failed:
https://www.iec.ch
...