ISO/IEC 17344:2005
(Main)Information technology — Data interchange on 120 mm and 80 mm Optical Disk using +R format — Capacity: 4,7 and 1,46 Gbytes per side (Recording speed up to 8X)
Information technology — Data interchange on 120 mm and 80 mm Optical Disk using +R format — Capacity: 4,7 and 1,46 Gbytes per side (Recording speed up to 8X)
ISO/IEC 17344:2005 specifies the mechanical, physical and optical characteristics of 120 mm recordable optical disks with capacities of 4,7 gigabytes and 9,4 gigabytes. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. The data can be written once and read many times using a non-reversible method. These disks are identified as +R. The +R system also allows 80 mm disks with capacities of 1,46 gigabytes and 2,92 gigabytes. These disks have the same characteristics as the 120 mm disks, except for some parameters related to the smaller dimensions. All parameters unique to the 80 mm disks are specified in Annex A. ISO/IEC 17344 specifies: two related but different types of this disk; the conditions for conformance; the environments in which the disk is to be tested, operated and stored; the mechanical, physical and dimensional characteristics of the disk, so as to provide mechanical interchange between data processing systems; the format of the information on the disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method; and the characteristics of the signals recorded on the disk, which enable data processing systems to read the data from the disk. ISO/IEC 17344:2005 provides for the interchange of disks between optical disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.
Technologies de l'information — Échange de données sur disque optique de 120 mm et 80 mm en utilisant le format +R — Capacité: 4,7 Go et 1,46 Go par face (vitesse d'enregistrement inférieure ou égale à 8X)
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 17344
First edition
2005-02-01
Information technology — Data
interchange on 120 mm and 80 mm
optical disk using +R format — Capacity:
4,7 Gbytes and 1,46 Gbytes per side
(recording speed up to 4X)
Technologies de l'information — Échange de données sur disque
optique de 120 mm et 80 mm en utilisant le format +R — Capacité:
4,7 Go et 1,46 Go par face (vitesse d'enregistrement inférieure ou égale
à 4X)
Reference number
ISO/IEC 17344:2005(E)
©
ISO/IEC 2005
---------------------- Page: 1 ----------------------
ISO/IEC 17344:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO/IEC 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2005 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 17344:2005(E)
Contents Page
Foreword. viii
Section 1 — General . 1
1 Scope. 1
2 Conformance . 1
2.1 Optical Disk . 1
2.2 Generating system. 1
2.3 Receiving system. 2
2.4 Compatibility statement . 2
3 Normative references . 2
4 Terms and definitions. 2
5 Conventions and notations. 4
5.1 Representation of numbers . 4
5.2 Names. 4
6 List of acronyms . 4
7 General description of the optical disk. 5
8 General Requirements. 6
8.1 Environments . 6
8.1.1 Test environment . 6
8.1.2 Operating environment. 7
8.1.3 Storage environment . 7
8.1.4 Transportation. 7
8.2 Safety requirements. 7
8.3 Flammability . 7
9 Reference Drive. 7
9.1 Optical system. 7
9.2 Optical beam. 8
9.3 Read channel 1. 9
9.4 Disk clamping. 9
9.5 Rotation of the disk. 9
9.6 Wobble channel (Read channel 2). 10
9.7 Tracking channel (Read channel 2). 10
9.7.1 Normalized servo transfer function . 10
9.7.2 Reference Servo for Axial Tracking . 10
9.7.3 Reference Servo for Radial Tracking . 11
Section 2 — Dimensional, mechanical and physical characteristics of the disk. 13
10 Dimensional characteristics . 13
10.1 Reference Planes . 13
10.2 Overall dimensions . 13
10.3 First transition area. 14
10.4 Second transition area . 14
10.5 Clamping Zone . 14
10.6 Third transition area . 14
10.7 Information Zone. 14
10.8 Rim Area. 15
10.9 Remark on tolerances. 15
11 Mechanical characteristics . 17
© ISO/IEC 2005 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC 17344:2005(E)
11.1 Mass.17
11.2 Moment of inertia.17
11.3 Dynamic imbalance.17
11.4 Axial runout.17
11.5 Radial runout .17
12 Optical characteristics in the Information Zone.18
12.1 Index of refraction .18
12.2 Thickness of the substrate.18
12.3 Reflectivity .18
12.4 Birefringence .18
12.5 Angular deviation .19
Section 3 — Format of information .20
13 Data format.20
13.1 Data Frames .20
13.1.1 Identification Data (ID) .21
13.1.2 ID Error Detection Code (IED) .21
13.1.3 RSV .22
13.1.4 Error Detection Code (EDC) .22
13.2 Scrambled Frames .22
13.3 ECC Blocks .23
13.4 Recording Frames.24
13.5 Modulation and NRZI conversion .25
13.6 Physical Sectors.26
13.7 Layout of a Recording UNit (RUN).27
13.7.1 Recording Unit position.28
13.8 d.c. component suppression control .28
14 Track format.29
14.1 Track shape.29
14.2 Track path .29
14.3 Track pitch .30
14.4 Track layout .30
14.4.1 ADIP information .30
14.4.2 Physical format information in ADIP.35
Section 4 — Format of the Information Zone .46
15 General description of the Information Zone .46
16 Layout of the Information Zone of a Single-session disk .46
16.1 Physical Sector Numbers (PSNs) .46
17 Inner Drive Area.47
17.1 Initial Zone.48
17.2 Inner Disk Test Zone .48
17.3 Count Zone Run-in .48
17.4 Inner Disk Count Zone .48
17.5 Inner Disk Administration Zone.48
17.6 Table of Contents (TOC) Zone .49
17.6.1 Table of Contents Blocks .49
17.6.2 Recorded Area Indicators.52
18 Lead-in Zone .52
18.1 Guard Zone 1 .52
18.2 Reserved Zone 1.52
18.3 Reserved Zone 2.53
18.4 Inner Disk Identification Zone.53
18.5 Reserved Zone 3.53
18.6 Reference Code Zone .53
18.7 Buffer Zone 1 .54
18.8 Control Data Zone .54
iv © ISO/IEC 2005 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/IEC 17344:2005(E)
18.8.1 Physical format information. 54
18.8.2 Disk manufacturing information. 56
18.8.3 Content provider information . 56
18.9 Buffer Zone 2 . 56
19 Data Zone. 56
20 Lead-out Zone . 56
20.1 Buffer Zone 3 . 57
20.2 Outer Disk Identification Zone. 57
20.3 Guard Zone 2 . 57
21 Outer Drive Area. 57
21.1 Outer Disk Administration Zone. 58
21.2 Outer Disk Count Zone. 58
21.3 Outer Disk Test Zone. 58
21.4 Guard Zone 3 . 58
22 Multi-session Layout . 58
22.1 Intro . 59
22.1.1 Buffer Zone A . 60
22.1.2 Inner Session Identification Zone . 60
22.1.3 Session Control Data Zone . 60
22.1.4 Buffer Zone B . 60
22.2 Data Zone. 60
22.3 Closure. 60
22.3.1 Buffer Zone C . 60
22.3.2 Outer Session Identification Zone. 60
23 Sequential recording in Fragments. 60
23.1 Opening a Session. 60
23.1.1 Incomplete Fragment. 61
23.1.2 Reserved Fragments. 61
23.1.3 Recording User Data in Fragments. 62
23.1.4 Closing a Fragment. 62
23.2 Closing a Session . 62
23.2.1 Lead-in/Intro Zone. 63
23.2.2 Closure Zone . 63
23.3 Finalizing the disk . 63
24 Assignment of Logical Sector Numbers (LSNs). 63
25 Disk Control Blocks . 63
25.1 General format of Disk Control Blocks. 63
25.2 Format of the Session DCB (SDCB). 65
25.2.1 Session Items . 67
Section 5 — Characteristics of the groove. 69
26 General. 69
27 Method of testing . 69
27.1 Environment . 69
27.2 Reference Drive. 69
27.2.1 Optics and mechanics. 69
27.2.2 Read power. 69
27.2.3 Read channels. 69
27.2.4 Tracking . 69
27.3 Definition of signals. 70
28 Characteristics of the groove signals. 71
28.1 Phase depth. 71
28.2 Push-pull signal . 71
28.3 Track Cross signal . 71
28.4 Normalized wobble signal. 71
© ISO/IEC 2005 – All rights reserved v
---------------------- Page: 5 ----------------------
ISO/IEC 17344:2005(E)
28.5 Characteristics of the wobble .71
Section 6 — Characteristics of the recording layer.72
29 Method of testing.72
29.1 Environment.72
29.2 Reference Drive .72
29.2.1 Optics and mechanics .72
29.2.2 Read power .72
29.2.3 Read channels .72
29.2.4 Tracking.72
29.2.5 Scanning velocity.73
29.3 Write conditions .73
29.3.1 Write pulse waveform .73
29.3.2 Write power.73
29.3.3 Write power dependency on wavelength.73
29.3.4 Write power window.74
29.4 Measurement conditions .74
30 Characteristics of the recorded signals.75
30.1 Channel bit length .75
30.2 Definition of signals .75
30.2.1 High frequency signals (HF).75
30.2.2 Modulated amplitude.75
30.2.3 Signal asymmetry.76
30.2.4 Normalized Slicing Level jump .76
30.2.5 Jitter.76
30.2.6 Track Cross signal .76
30.3 Read st
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.