ISO 19043:2015
(Main)Natural rubber latex concentrate — Determination of total phosphate content by spectrophotometric method
Natural rubber latex concentrate — Determination of total phosphate content by spectrophotometric method
ISO 19043:2015 specifies a method for the determination of total phosphate content of natural rubber latex concentrate. This method is not necessarily suitable for latex from natural sources other than the Hevea brasiliensis.
Concentré de latex de caoutchouc naturel — Détermination de la teneur totale en phosphate par méthode spectrophotométrique
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 19043
First edition
2015-09-01
Natural rubber latex concentrate —
Determination of total phosphate
content by spectrophotometric method
Concentré de latex de caoutchouc naturel — Détermination de la
teneur totale en phosphate par méthode spectrophotométrique
Reference number
ISO 19043:2015(E)
©
ISO 2015
---------------------- Page: 1 ----------------------
ISO 19043:2015(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 19043:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Apparatus . 1
5 Reagents . 1
6 Procedure. 2
6.1 General . 2
6.2 Determination of total solids content . 2
6.3 Preparation of standard phosphate solutions . 2
6.4 Determination of phosphate content. 2
7 Expression of results . 3
8 Precision data . 3
9 Test report . 3
Annex A (informative) Precision data . 4
Bibliography . 6
© ISO 2015 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 19043:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 45, Rubber and rubber products, Subcommittee
SC 3, Raw materials (including latex) for use in the rubber industry.
iv © ISO 2015 – All rights reserved
---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 19043:2015(E)
Natural rubber latex concentrate — Determination of total
phosphate content by spectrophotometric method
1 Scope
This International Standard specifies a method for the determination of total phosphate content of
natural rubber latex concentrate. This method is not necessarily suitable for latex from natural sources
other than the Hevea brasiliensis.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 124, Latex, rubber — Determination of total solids content
ISO 648, Laboratory glassware — Single-volume pipettes
3 Principle
Approximately 20 g of concentrated latex, of which the total solids content has been determined, is
coagulated with hydrochloric acid.
The coagulated latex is removed and the serum filtered through filter paper.
The residual phosphate present in a known volume of the serum is determined by measuring absorbance
with a spectrophotometer at wavelength 470 nm.
4 Apparatus
4.1 Balance, accurate to 0,1 mg.
3 3
4.2 Volumetric pipettes, of capacity 10 cm and 25 cm , complying with the requirements of
ISO 648, class A.
5 Reagents
Use reagents
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.