ISO 3379
(Main)Leather — Determination of distension and strength of surface (ball burst method)
Leather — Determination of distension and strength of surface (ball burst method)
ISO 3379:2015 specifies a test method for the determination of distension and strength of the leather grain or finished surface. This method is applicable to all flexible leathers and it is particularly suitable to determine the lastability of leathers for footwear uppers.
Cuir — Détermination de l'extension et de la résistance à la traction de la surface (méthode de la bille)
ISO 3379:2015 spécifie une méthode de détermination de l'extension et de la résistance à la traction de la fleur d'un cuir ou d'une surface finie. Cette méthode est applicable à tous les cuirs souples, et elle est particulièrement adaptée à la détermination de l'aptitude au montage des cuirs pour tiges d'articles chaussants.
General Information
Relations
Buy Standard
Standards Content (Sample)
FINAL DRAFT
International
Standard
ISO/FDIS 3379
IULTCS
IUP 9
IULTCS
Leather — Determination of
Voting begins on:
distension and strength of surface
2024-08-05
(Ball burst method)
Voting terminates on:
2024-09-30
Cuir — Détermination de l'extension et de la résistance à la
traction de la surface (méthode de la bille)
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference numbers
ISO/FDIS 3379:2024(en)
IULTCS/IUP 9:2024(en) © ISO 2024
FINAL DRAFT
ISO/FDIS 3379:2024(en)
International
Standard
ISO/FDIS 3379
IULTCS
IUP 9
IULTCS
Leather — Determination of
Voting begins on:
distension and strength of surface
(Ball burst method)
Voting terminates on:
Cuir — Détermination de l'extension et de la résistance à la
traction de la surface (méthode de la bille)
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Reference numbers
Published in Switzerland ISO/FDIS 3379:2024(en)
IULTCS/IUP 9:2024(en) © ISO 2024
ii
ISO/FDIS 3379:2024(en)
IULTCS/IUP 9:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus and material . 2
6 Specimen and test pieces preparation . 3
7 Procedure . 3
8 Test report . 4
Annex A (informative) Sources of apparatus . 6
iii
ISO/FDIS 3379:2024(en)
IULTCS/IUP 9:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to further
the advancement of leather science and technology. IULTCS has three Commissions, which are responsible
for establishing international methods for the sampling and testing of leather. ISO recognizes IULTCS as an
international standardizing body for the preparation of test methods for leather.
This document was prepared by the Physical Test Commission of the International Union of Leather
Technologists and Chemists Societies (IUP Commission, IULTCS) in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 289, Leather, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 3379:2015), which has been technically
revised.
The main changes are as follows:
— the terminology and references are modified to be in line with ISO 2418:2023;
— Clause 6 has been re-arranged to make it easier to follow.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO/FDIS 3379:2024(en)
FINAL DRAFT International Standard
IULTCS/IUP 9:2024(en)
Leather — Determination of distension and strength of
surface (Ball burst method)
1 Scope
This document specifies a test method for the determination of distension and strength of the leather
grain or finished surface. This method is applicable to all flexible leathers and it is particularly suitable to
determine the lastability of leathers for footwear uppers.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 2418, Leather — Chemical, physical, mechanical and fastness tests — Position and preparation of specimens
for testing
ISO 2419, Leather — Physical and mechanical tests —Specimen and test piece conditioning
ISO 2589, Leather — Physical and mechanical tests — Determination of thickness
ISO 15115, Leather — Vocabulary
EN 15987, Leather — Terminology — Key definit
...
Date: 2024-06-27
ISO/FDIS 3379:2024(E)
IULTCS/IUP 9:2024(E)
rd
3 edition
IULTCS
Secretariat: ISO
Date: 2024-07-22
Leather – — Determination of distension and strength of surface
(Ball burst method)
Cuir — Détermination de l'extension et de la résistance à la traction de la surface (méthode de la bille)
FDIS stage
ISO/FDIS 3379:2024(E)
IULTCS/IUP 9:2024(Een)
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO'sISO’s member body in the country of the requester.
ISO Copyright Officecopyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: E-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland.
ii © ISO 2024 – All rights reserved
ii
ISO/FDIS 3379:2024(E)
IULTCS/IUP 9:2024(Een)
Contents Page
Foreword . iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus and material . 2
6 Specimen and test pieces preparation . 3
7 Procedure . 4
8 Test report . 5
Annex A (informative) Sources of apparatus . 6
iii
ISO/FDIS 3379:2024(E)
IULTCS/IUP 9:2024(Een)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 ((see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights
in respect thereof. As of the date of publication of this document, ISO [had/had not] received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that this
may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patentswww.iso.org/patents. ISO shall not be held responsible for identifying any or all such
patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
.
IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to further the
advancement of leather science and technology. IULTCS has three Commissions, which are responsible for
establishing international methods for the sampling and testing of leather. ISO recognizes IULTCS as an
international standardizing body for the preparation of test methods for leather.
This document was prepared by the Physical Test Commission of the International Union of Leather
Technologists and Chemists Societies (IUP Commission, IULTCS) in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 289, Leather, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 3379:2015), which has been technically
revised.
The main changes are as follows:
— — the terminology and references are modified to be in line with ISO 2418:2023;
— Clause 6— Clause 6 has been re-arranged to make it easier to follow.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.htmlwww.iso.org/members.html.
ii © ISO 2024 – All rights reserved
iv
DRAFT INTERNATIONAL STANDARD ISO/FDIS 3379:2024(E)
IULTCS/IUP 9:2024(E)
Leather — Determination of distension and strength of surface (Ball
burst method)
1 Scope
This document specifies a test method for the determination of distension and strength of the leather grain or
finished surface. This method is applicable to all flexible leathers and it is particularly suitable to determine
the lastability of leathers for footwear uppers.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 2418, Leather — Chemical, physical, mechanical and fastness tests — Position and preparation of specimens
for testing
ISO 2419, Leather — Physical and mechanical tests —Specimen and test piece conditioning
ISO 2589, Leather — Physical and mechanical tests — Determination of thickness
ISO 15115, Leather — Vocabulary
EN 15987, Leather — Terminology — Key definitions for the leather trade
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 15115, EN 15987 and the following
apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— — ISO Online browsing platform: available at https://www.iso.org/obp
— — IEC Electropedia: available at https://www.electropedia.org/
3.1
wearing surface
exposed or visible face of the leather when used in its intended application
Note 1 to entry: The wearing surface is usually the grain side of leather, however, the wearing surface of some leathers
may be otherwise dressed or finished, e.g. patent leather.
3.2
reverse side
opposite side to the wearing surface (3.1(3.1))
Note 1 to entry: The reverse side is usually the flesh side of leather.
ISO/FDIS 3379:2024(E)
IULTCS/IUP 9:2024(Een)
3.3
crack
small surface splits or tears less than approximately 0,5 mm
3.4
burst
...
PROJET FINAL
Norme
internationale
ISO/FDIS 3379
IULTCS
IUP 9
IULTCS
Cuir — Détermination de
Début de vote:
l'extension et de la résistance à la
2024-08-05
traction de la surface (méthode de
Vote clos le:
la bille)
2024-09-30
Leather — Determination of distension and strength of surface
(Ball burst method)
LES DESTINATAIRES DU PRÉSENT PROJET SONT
INVITÉS À PRÉSENTER, AVEC LEURS OBSERVATIONS,
NOTIFICATION DES DROITS DE PROPRIÉTÉ DONT ILS
AURAIENT ÉVENTUELLEMENT CONNAISSANCE ET À
FOURNIR UNE DOCUMENTATION EXPLICATIVE.
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
INDUSTRIELLES, TECHNOLOGIQUES ET COM-MERCIALES,
AINSI QUE DU POINT DE VUE DES UTILISATEURS, LES
PROJETS DE NORMES
TRAITEMENT PARALLÈLE ISO/CEN
INTERNATIONALES DOIVENT PARFOIS ÊTRE CONSIDÉRÉS
DU POINT DE VUE DE LEUR POSSI BILITÉ DE DEVENIR DES
NORMES POUVANT
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTATION
NATIONALE.
Numéros de référence
ISO/FDIS 3379:2024(fr)
IULTCS/IUP 9:2024(fr) © ISO 2024
PROJET FINAL
ISO/FDIS 3379:2024(fr)
Norme
internationale
ISO/FDIS 3379
IULTCS
IUP 9
IULTCS
Cuir — Détermination de
Début de vote:
l'extension et de la résistance à la
2024-08-05
traction de la surface (méthode de
Vote clos le:
la bille)
2024-09-30
Leather — Determination of distension and strength of surface
(Ball burst method)
LES DESTINATAIRES DU PRÉSENT PROJET SONT
INVITÉS À PRÉSENTER, AVEC LEURS OBSERVATIONS,
NOTIFICATION DES DROITS DE PROPRIÉTÉ DONT ILS
AURAIENT ÉVENTUELLEMENT CONNAISSANCE ET À
FOURNIR UNE DOCUMENTATION EXPLICATIVE.
DOCUMENT PROTÉGÉ PAR COPYRIGHT
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
© ISO 2024 INDUSTRIELLES, TECHNOLOGIQUES ET COM-MERCIALES,
AINSI QUE DU POINT DE VUE DES UTILISATEURS, LES
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
PROJETS DE NORMES
TRAITEMENT PARALLÈLE ISO/CEN
INTERNATIONALES DOIVENT PARFOIS ÊTRE CONSIDÉRÉS
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
DU POINT DE VUE DE LEUR POSSI BILITÉ DE DEVENIR DES
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
NORMES POUVANT
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTATION
NATIONALE.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Numéros de référence
Publié en Suisse ISO/FDIS 3379:2024(fr)
IULTCS/IUP 9:2024(fr) © ISO 2024
ii
ISO/FDIS 3379:2024(fr)
IULTCS/IUP 9:2024(fr)
Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe. 2
5 Appareillage et matériel . 2
5.1 Machine d’essai, constituée des éléments suivants (voir Figure 1). .2
6 Préparation du spécimen et des éprouvettes . 3
7 Mode opératoire . 3
8 Rapport d’essai . 4
Annexe A (informative) Sources d'appareillage. 6
iii
ISO/FDIS 3379:2024(fr)
IULTCS/IUP 9:2024(fr)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux
de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général
confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO, participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document
a été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2
(voir www.iso.org/directives).
L’ISO attire l’attention sur le fait que la mise en application du présent document peut entraîner l’utilisation
d’un ou de plusieurs brevets. L’ISO ne prend pas position quant à la preuve, à la validité et à l’applicabilité de
tout droit de brevet revendiqué à cet égard. À la date de publication du présent document, l’ISO n'avait pas reçu
notification qu’un ou plusieurs brevets pouvaient être nécessaires à sa mise en application. Toutefois, il y a lieu
d’avertir les responsables de la mise en application du présent document que des informations plus récentes
sont susceptibles de figurer dans la base de données de brevets, disponible à l'adresse www.iso.org/brevets.
L’ISO ne saurait être tenue pour responsable de ne pas avoir identifié de tels droits de brevet.
Les appellations commerciales éventuellement mentionnées dans le présent document sont données pour
information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion de
l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles techniques au
commerce (OTC), voir le lien suivant : www.iso.org/iso/fr/avant-propos.html.
L'IULTCS est une organisation mondiale de sociétés professionnelles des industries du cuir fondée en 1897
ayant pour mission de favoriser l'avancement des sciences et technologies du cuir. L’IULTCS a trois
commissions qui sont responsables de l’établissement de méthodes internationales d’échantillonnage et
d’essai des cuirs. L’ISO reconnaît l’IULTCS en tant qu’organisme international à activités normatives pour
l’élaboration de méthodes d’essai relatives au cuir.
Le présent document a été élaboré par la Commission Essais physiques de l’Union internationale des sociétés
de techniciens et chimistes du cuir (Commission IUP, IULTCS) en collaboration avec le Comité technique
du Comité européen de normalisation (CEN) CEN/TC 289, Cuir, conformément à l’Accord de coopération
technique entre l’ISO et le CEN (Accord de Vienne).
Cette troisième édition annule et remplace la deuxième édition (ISO 3379:2015) qui a fait l’objet d’une
révision technique.
Les principales modifications sont les suivantes :
— la terminologie et les références ont été modifiées pour être conformes à l’ISO 2418:2023 ;
— l’Article 6 a été réorganisé pour qu’il soit plus facile à suivre.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes se
trouve à l’adresse www.iso.org/fr/members.html.
iv
ISO/FDIS 3379:2024(fr)
PROJET FINAL Norme internationale
IULTCS/IUP 9:2024(fr)
Cuir — Détermination de l'extension et de la résistance à la
traction de la surface (méthode de la bille)
1 Domaine d’application
Le présent document spécifie une méthode d’essai pour la détermination de l’extension et de la résistance à
la traction de la fleur d’un cuir ou d’une surface finie. Cette méthode est applicable à tous les cuirs souples, et
elle est particulièrement adaptée à la détermination de l’aptitude au montage des cuirs pour tiges d’articles
chaussants.
2 Références normatives
Les documents suivants sont cités dans le texte de sorte qu’ils constituent, pour tout ou partie de leur
contenu, des exigences du présent document. Pour les références datées, seule l’édition citée s’applique. Pour
les références non datées, la dernière édition du document de référence s'applique (y compris les éventuels
amendements).
ISO 2418, Cuir — Essais chimiques, physiques, mécaniques et essais de solidité — Emplacement et préparation
des spécimens pour les essais
ISO 2419, Cuir — Essais physiques et mécaniques — Conditionnement des spécimens et des éprouvettes
ISO 2589, Cuir — Essais physiques et mécaniques — Détermination de l’épaisseur
ISO 15115, Cuir — Vocabulaire
EN 15987, Cuir — Terminologie —
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.