iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO/FDIS 12185

(Main)

Crude petroleum, petroleum products and related products — Determination of density — Laboratory density meter with an oscillating U-tube sensor

Crude petroleum, petroleum products and related products — Determination of density — Laboratory density meter with an oscillating U-tube sensor

Pétroles bruts, produits pétroliers et produits connexes — Détermination de la masse volumique — Appareil de masse volumique de laboratoire à capteur à tube en U oscillant

General Information

Status
Not Published
ICS
75.080 - Petroleum products in general
Technical Committee
ISO/TC 28/SC 2 - Measurement of petroleum and related products
Drafting Committee
ISO/TC 28/SC 2 - Measurement of petroleum and related products
Current Stage
5020 - FDIS ballot initiated: 2 months. Proof sent to secretariat
Start Date
27-Nov-2023
Completion Date
27-Nov-2023
Ref Project

Relations

Consolidates
ISO 22587:2023 - Traditional Chinese medicine — Acupoint magnetotherapy plasters for single use
Effective Date
06-Jun-2022
Revises
ISO 12185:1996 - Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method
Effective Date
06-Jun-2022

Buy Standard

ISO/FDIS 12185 - Crude petroleum, petroleum products and related products — Determination of density — Laboratory density meter with an oscillating U-tube sensor Released:13. 11. 2023ISO/FDIS 12185 - Crude petroleum, petroleum products and related products — Determination of density — Laboratory density meter with an oscillating U-tube sensor Released:13. 11. 2023
PreviousNext
Draft
ISO/FDIS 12185 - Crude petroleum, petroleum products and related products — Determination of density — Laboratory density meter with an oscillating U-tube sensor Released:13. 11. 2023
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/FDIS 12185 - Crude petroleum, petroleum products and related products — Determination of density — Laboratory density meter with an oscillating U-tube sensor Released:13. 11. 2023REDLINE ISO/FDIS 12185 - Crude petroleum, petroleum products and related products — Determination of density — Laboratory density meter with an oscillating U-tube sensor Released:13. 11. 2023
PreviousNext
Draft
REDLINE ISO/FDIS 12185 - Crude petroleum, petroleum products and related products — Determination of density — Laboratory density meter with an oscillating U-tube sensor Released:13. 11. 2023
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 12185
ISO/TC 28/SC 2
Crude petroleum, petroleum products
Secretariat: BSI
and related products — Determination
Voting begins on:
2023-11-27 of density — Laboratory density meter
with an oscillating U-tube sensor
Voting terminates on:
2024-01-22
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 12185:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/FDIS 12185:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 12185
ISO/TC 28/SC 2
Crude petroleum, petroleum products
Secretariat: BSI
and related products — Determination
Voting begins on:
of density — Laboratory density meter
with an oscillating U-tube sensor
Voting terminates on:
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/FDIS 12185:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/FDIS 12185:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 3
5 Apparatus . 3
5.1 Density meter . 3
5.2 Homogenizer . 3
5.3 Constant­temperature bath . 3
6 Reagents and materials . 4
6.1 Flushing solvent .
...

Style Definition
...
Style Definition
...

Style Definition
...
Style Definition
...
Style Definition
...
For submission ISO/FDIS 12185:after DIS comment v312023(E)
Style Definition
...
ISO TC 28/SC 2/WG 12
Style Definition
...
Style Definition
...
Secretariat: BSI
Style Definition
...
Date: 2023-8-2111-10
Style Definition
...
Style Definition
Crude petroleum, petroleum products and related products - Determination of density -
...
Style Definition
Laboratory density meter with an oscillating U -tube sensor.
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...

Style Definition
...
Style Definition
...
Style Definition
...
WD/CD/DIS/FDIS stage
Style Definition
...
Style Definition
...

Style Definition
...
Warning for WDs and CDs
Style Definition
...
Style Definition
...
This document is not an ISO International Standard. It is distributed for review and comment. It is subject to
change without notice and may not be referred to as an International Standard.
Style Definition
...
Style Definition
...
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation. Style Definition
...
Style Definition
...

Style Definition
...

Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Formatted
...
Formatted
...
Formatted
...
Formatted
...
Formatted
...
Formatted
...
Formatted
...
Formatted
...
Formatted
...
Formatted
© ISO 12185 – All rights reserved
...

---------------------- Page: 1 ----------------------
© ISO 20XX

---------------------- Page: 2 ----------------------
ISO /FDIS 12185-after DIS comment:2023(XE)
Formatted: Font: 11 pt
Formatted: Font: 11 pt
Formatted: Font: 11 pt
© ISO 2023
Formatted: Left, Space After: 0 pt, Line spacing: single
All rights reserved. Unless otherwise specified, or required in the context of its implementation,
Formatted: Font: 11 pt
no part of this publication may be reproduced or utilized otherwise in any form or by any means,
Formatted
electronic or mechanical, including photocopying, or posting on the internet or an intranet,
Formatted: Font: 11 pt, Font color: Blue
without prior written permission. Permission can be requested from either ISO at the address
below or ISO’sISO's member body in the country of the requester.
Formatted: Indent: Left: 0 cm, Right: 0 cm, Adjust
space between Latin and Asian text, Adjust space
ISO copyright officeCopyright Office
between Asian text and numbers, Border: Left: (No
border), Right: (No border)
CP 401 • Ch. de Blandonnet 8
Formatted: Font: 11 pt, Font color: Blue
CH-1214 Vernier, Geneva
Formatted: Font: 11 pt, Font color: Blue
Phone: + 41 22 749 01 11
Formatted: Font: 11 pt, Font color: Blue
Formatted: Font: 11 pt, Font color: Blue
Email: copyright@iso.org
Formatted: Indent: Left: 0 cm, First line: 0 cm, Right: 0
Email: copyright@iso.org
cm, Adjust space between Latin and Asian text, Adjust
space between Asian text and numbers, Border: Left:
Website: www.iso.orgwww.iso.org
(No border), Right: (No border)
Formatted: Font: 11 pt, Font color: Blue
Published in Switzerland.
Formatted: Font: 11 pt, Font color: Blue, English (United
Kingdom)
Formatted: Font: 11 pt, Font color: Blue, English (United
Kingdom)
Formatted: Font: 11 pt, Font color: Blue, English (United
Kingdom)
Formatted: Font: 11 pt, Font color: Blue, English (United
Kingdom)
Formatted: Indent: Left: 0 cm, First line: 0 cm, Right: 0
cm, Adjust space between Latin and Asian text, Adjust
space between Asian text and numbers, Border: Bottom:
(No border), Left: (No border), Right: (No border)
Formatted: Font: 11 pt, Font color: Blue, English (United
Kingdom)
Formatted: Font: 11 pt, Font color: Blue, English (United
Kingdom)
4 © ISO #### – All rights reserved
iv © ISO 2023 – All rights reserved

---------------------- Page: 3 ----------------------
ISO /FDIS 12185-after DIS comment:2023(XE)
Formatted: Font: 11 pt
Formatted: Font: 11 pt
Formatted: Font: 11 pt
Contents
Formatted: Font: 11 pt
Formatted: Space Before: 48 pt, Don't adjust space
between Latin and Asian text, Don't adjust space
Foreword . 7
between Asian text and numbers
Introduction . 9
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 3838:2004/Amd 1:2023(Amendment)
Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
  • Draft
    1 page
    English language
    sale 15% off
  • Draft
    1 page
    English language
    sale 15% off
ISO
ISO 3838:2004(Main)
Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods

ISO 3838:2004 specifies methods for the determination of the density or relative density of crude petroleum and of petroleum products handled as liquids. The capillary-stoppered pyknometer method is also for use with solids and this method may also be used for coal tar products, including road tars, creosote and tar pitches, or for mixtures of these with petroleum products. This method is not suitable for the determination of the density or relative density of highly volatile liquids having Reid vapour pressures greater than 50 kPa according to ISO 3007 or having an initial boiling point below 40 degrees Celsius. The graduated bicapillary pyknometer method is recommended for the accurate determination of the density or relative density of all except the more viscous products, and is particularly useful when only small amounts of samples are available. The method is restricted to liquids having Reid vapour pressures of 130 kPa or less according to ISO 3007 and having kinematic viscosities less than 50 mm2/s (50 centistokes (cSt)) at the test temperature. Special precautions are specified for the determination of the density or relative density of highly volatile liquids.

  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    19 pages
    French language
    sale 15% off
  • Standard
    18 pages
    Russian language
    sale 15% off
ISO
ISO 3170:2004(Main)
Petroleum liquids — Manual sampling

ISO 3170:2004 specifies the manual methods to be used for obtaining samples of liquid or semi-liquid hydrocarbons, tank residues and deposits from fixed tanks, railcars, road vehicles, ships and barges, drums and cans, or from liquids being pumped in pipelines. ISO 3170:2004 applies to the sampling of petroleum products, crude oils and intermediate products, which are stored in tanks at or near atmospheric pressure, or transferred by pipelines, and are handled as liquids at temperatures from near ambient up to 200 degrees Celsius. The sampling procedures specified are not intended for the sampling of special petroleum products which are the subject of other International Standards, such as electrical insulating oils (IEC 60475), liquefied petroleum gases (ISO 4257), liquefied natural gases (ISO 8943) and gaseous natural gases (ISO 10715).

  • Standard
    55 pages
    English language
    sale 15% off
  • Standard
    57 pages
    French language
    sale 15% off
  • Standard
    80 pages
    Russian language
    sale 15% off
ISO
ISO 12937:2000(Main)
Petroleum products — Determination of water — Coulometric Karl Fischer titration method

This International Standard specifies a method for the direct determination of water in petroleum products boiling below 390 °C. It covers the mass fraction range 0,003 % (m/m) to 0,100%(m/m). It is not applicable to products containing ketones or to residual fuel oils. This International Standard may be applicable to lubricating base oils. However, the precision has not been established for these materials. The precision given in clause 12 is based upon data obtained using dual-cell, dual-electrolyte systems. NOTE 1 A number of substances and classes of compounds associated with condensation or oxidation-reduction reactions interfere in the determination of water by Karl Fischer titration. In petroleum products, the most common interferences are hydrogen sulfide and mercaptan sulfur, however, mass fractions of these below 0,003 % (m/m) as sulfur will not cause significant interference over the range 0,003 % (m/m) to 0,100%(m/m) water. Other organic sulfur compounds commonly present such as sulfides, disulphides and thiophenes, do not interfere. NOTE 2 An alternative procedure is provided for information in annex B for the direct determination of water over the range 0,003 % (V/V) to 0,100 % (V/V) in petroleum products. The limitations under which this alternative volume measurement may be used are listed in annex B. NOTE 3 For the purposes of this International Standard, the terms "% (m/m)" and "% (V/V)" are used to represent the mass and volume fraction of a material respectively.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
ISO
ISO 6296:2000(Main)
Petroleum products — Determination of water — Potentiometric Karl Fischer titration method
  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
ISO
ISO 3733:1999(Main)
Petroleum products and bituminous materials — Determination of water — Distillation method
SIST ISO 3733:2014

This International Standard specifies a method for determination of water up to 25 % in petroleum products, bitumens, tars and products derived from these materials, excluding emulsions, by the distillation method. The specific products considered during the development of this test method are listed in Table 3. This International Standard may be used to determine water content in excess of 25 %. However, no precision data has been determined at levels greater than 25 %. Volatile water-soluble material, if present, is measured as water. NOTE 1 A knowledge of the water content of petroleum products is important in the refining, purchase, sale and transfer of products. NOTE 2 The amount of water determined by this method can be used to correct the volume involved in the custody transfer of product.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off
ISO
ISO 3675:1998(Main)
Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method
  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
ISO
ISO 12185:1996(Main)
Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method

Gives a method for the determination, using an oscillation U-tube densitometer, of the density of crude petroleum and related products within the range 600 kg/m^3 to 1 100 kg/m^3 which can be handled as single-phase liquids at the test temperature and pressure.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 3171:1988(Main)
Petroleum liquids — Automatic pipeline sampling
SIST ISO 3171:1996

Recommends procedures for crude oil and liquid petroleum products being conveyed by pipeline. Does not apply to liquefied petroleum gases and liquefied natural gases. The principal purpose ist to give guidelines for specifying, testing, operating, maintaining and monitoring crude oil samples.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    55 pages
    English language
    sale 15% off
  • Standard
    55 pages
    French language
    sale 15% off
  • Standard
    55 pages
    French language
    sale 15% off
ISO
ISO 3993:1984(Main)
Liquefied petroleum gas and light hydrocarbons — Determination of density or relative density — Pressure hydrometer method

The prescribed apparatus shall not be used for materials having gauge vapour pressures higher than 1,4 MPa (absolute vapour pressure 1,5 MPa) at the test temperature. Alternative calibration procedures are described, but only the one using a certified hydrometer is suitable for the determination of density to be used in calculations of qualities for custody transfer or fiscal purposes.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off