ISO/IEC 9798-4:1999

Information technology — Security techniques — Entity authentication — Part 4: Mechanisms using a cryptographic check function

This part of ISO/IEC 9798 specifies entity authentication mechanisms using a cryptographic check function. Two mechanisms are concerned with the authentication of a single entity (unilateral authentication), while the remaining are mechanisms for mutual authentication of two entities. The mechanisms specified in this part of ISO/IEC 9798 use time variant parameters such as time stamps, sequence numbers, or random numbers, to prevent valid authentication information from being accepted at a later time or more than once. If a time stamp or sequence number is used, one pass is needed for unilateral authentication, while two passes are needed to achieve mutual authentication. If a challenge and response method employing random numbers is used, two passes are needed for unilateral authentication, while three passes are required to achieve mutual authentication. Examples of cryptographic check functions are given in ISO/IEC 9797.

Technologies de l'information — Techniques de sécurité — Authentification d'entité — Partie 4: Mécanismes utilisant une fonction cryptographique de vérification

General Information

• Status: Published
• Publication Date: 15-Dec-1999
• ICS: 35.030 - IT Security
• ICS: 35.040 - Information coding
• Technical Committee: ISO/IEC JTC 1/SC 27 - Information security, cybersecurity and privacy protection
• Drafting Committee: ISO/IEC JTC 1/SC 27/WG 2 - Cryptography and security mechanisms
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 15-Nov-2021

Relations

• Corrected By: ISO/IEC 9798-4:1999/Cor 2:2012 - Information technology — Security techniques — Entity authentication — Part 4: Mechanisms using a cryptographic check function — Technical Corrigendum 2
• Effective Date: 26-Nov-2021
• Revises: ISO/IEC 9798-4:1995 - Information technology — Security techniques — Entity authentication — Part 4: Mechanisms using a cryptographic check function
• Effective Date: 15-Apr-2008

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 9798-4
Second edition
1999-12-15
Information technology — Security
techniques — Entity authentication —
Part 4:
Mechanisms using a cryptographic check
function
Technologies de l’information — Techniques de sécurité — Authentification
d'entité —
Partie 4: Mécanismes utilisant une fonction cryptographique de vérification
Reference number
ISO/IEC 9798-4:1999(E)
©
ISO/IEC 1999

---------------------- Page: 1 ----------------------
ISO/IEC 9798-4:1999(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe’s licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe’s licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©  ISO/IEC 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO/IEC 1999 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 9798-4:1999(E)
Contents
1 Scope. 1
2 Normative references. 1
3 Definitions and notation . 1
4 Requirements. 1
5 Mechanisms . 2
5.1 Unilateral authentication. 2
5.1.1 One pass authentication. 2
5.1.2 Two pass authentication. 3
5.2 Mutual authentication . 4
5.2.1 Two pass authentication. 4
5.2.2 Three pass authentication. 5
Annex A Use of text fields. 7
© ISO/IEC 1999 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 9798-4:1999(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in
liaison with ISO and IEC, also take part in the work.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO/IEC 9798 may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
International Standard ISO/IEC 9798-4 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC 27, IT Security techniques.
This second edition cancels and replaces the first edition (ISO/IEC 9798-4:1995), which has been technically
revised. Note, however, that implementations which comply with ISO/IEC 9798-4 (1st edition) will be compliant
with ISO/IEC 9798-4 (2nd edition).
ISO/IEC 9798 consists of the following parts, under the general title Information technology ⎯ Security techniques
⎯ Entity authentication:
⎯ Part 1: General
⎯ Part 2: Mechanisms using symmetric encipherment algorithms
⎯ Part 3: Mechanisms using digital signature techniques
⎯ Part 4: Mechanisms using a cryptographic check function
⎯ Part 5: Mechanisms using zero knowledge techniques
Further parts may follow.
Annex A of this part of ISO/IEC 9798 is for information only.
iv © ISO/IEC 1999 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO/IEC 9798-4:1999(E)
Information technology — Security techniques — Entity
authentication — Part 4: Mechanisms using a cryptographic check
function
1 Scope
This part of ISO/IEC 9798 specifies entity authentication mechanisms using a cryptographic check function. Two
mechanisms are concerned with the authentication of a single entity (unilateral authentication), while the remaining
are mechanisms for mutual authentication of two entities.
The mechanisms specified in this part of ISO/IEC 9798 use time variant parameters such as time stamps,
sequence numbers, or random numbers, to prevent valid authentication information from being accepted at a later
time or more than once.
If a time stamp or sequence number is used, one pass is needed for unilateral authentication, while two passes are
needed to achieve mutual authentication. If a challenge and response method employing random numbers is
used, two passes are needed for unilateral authentication, while three passes are required to achieve mutual
authentication.
Examples of cryptographic check functions are given in ISO/IEC 9797.
2 Normativereferences
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this part of ISO/IEC 9798. For dated references, subsequent amendments to, or revisions of, any of these
publications do not apply. However, parties to agreements based on this part of ISO/IEC 9798 are encouraged to
investigate the possibility of applying the most recent editions of the normative documents indicated below. For
undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC
maintain registers of currently valid International Standards.
ISO/IEC 9797 (all parts), Information technology ⎯ Security techniques ⎯ Message Authentication Codes (MACs).
ISO/IEC 9798-1:1997, Information technology ⎯ Security techniques ⎯ Entity authentication — Part 1: General.
3 Definitions and notation
For the purposes of this part of ISO/IEC 9798, the definitions and notation described in ISO/IEC 9798-1 apply.
4 Requirements
In the authentication mechanisms specified in this part of ISO/IEC 9798 an entity to be authenticated corroborates
its identity by demonstrating its knowledge of a secret authentication key. This is achieved by the entity using its
secret key with a cryptographic check function applied to specific data to obtain a cryptographic check value. The
cryptographic check value can be checked by anyone sharing the entity’s secret authentication key, who can re-
calculate the cryptographic check value and compare it with the value received.
© ISO/IEC 1999 – All rights reserved 1

---------------------- Page: 5 ----------------------
ISO/IEC 9798-4:1999(E)
The authentication mechanisms have the following requirements. If any one of these is not met then the
authentication process may be compromised or it cannot be implemented.
a) A claimant authenticating itself to a verifier shares a common secret authentication key with that verifier. This
key shall be known to the involved parties prior to the commencement of any particular run of an authentication
mechanism. The method by which the key is distributed to the entities is beyond the scope of this part of
ISO/IEC 9798.
b) The secret authentication key shared by a claimant and a verifier shall be known only to those two entities and,
possibly, to other parties they both trust.
c) The strength of the mechanisms is dependent on the length and the secrecy of the key, on the nature of the
cryptographic check functions, and on the length of the check value. These parameters shall be chosen to
meet the required security level, as may be specified by the security policy.
5 Mechanisms
In these authentication mechanisms the entities A and B shall share a common secret authentication key K or two
AB
unidirectional secret keys K and K prior to the commencement of any particular run of the authentication
AB BA
mechanisms. In the latter case, the unidirectional keys K a
...