ISO/IEC 10373-6:2016/Amd 3:2018

Identification cards — Test methods — Part 6: Proximity cards — Amendment 3: PICC loading effect

Cartes d'identification — Méthodes d'essai — Partie 6: Cartes de proximité — Amendement 3: Effet de charge PICC

General Information

• Status: Withdrawn
• Publication Date: 26-Mar-2018
• Withdrawal Date: 26-Mar-2018
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Drafting Committee: ISO/IEC JTC 1/SC 17/WG 8 - Integrated circuit cards without contacts
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 22-Jul-2020

Relations

• Revised: ISO/IEC 10373-6:2020 - Cards and security devices for personal identification — Test methods — Part 6: Contactless proximity objects
• Effective Date: 23-Apr-2020
• Amends: ISO/IEC 10373-6:2016 - Identification cards — Test methods — Part 6: Proximity cards
• Effective Date: 08-May-2020

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 10373-6
Third edition
2016-07-15
AMENDMENT 3
2018-04
Identification cards — Test
methods —
Part 6:
Proximity cards
AMENDMENT 3: PICC loading effect
Cartes d'identification — Méthodes d'essai —
Partie 6: Cartes de proximité
AMENDEMENT 3: Effet de charge PICC
Reference number
ISO/IEC 10373-6:2016/Amd.3:2018(E)
©
ISO/IEC 2018

---------------------- Page: 1 ----------------------
ISO/IEC 10373-6:2016/Amd.3:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 10373-6:2016/Amd.3:2018(E)

Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
The document was prepared by ISO/IEC JTC 1, Information technology, SC 17, Cards and security devices
for personal identification.
A list of all the parts in the ISO 10373 series can be found on the ISO website.
© ISO/IEC 2018 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 10373-6:2016/Amd.3:2018(E)
Identification cards — Test methods —
Part 6:
Proximity cards
AMENDMENT 3: PICC loading effect


Page 18, 7.1
Replace Table 3 and NOTE with the following Table
...