ISO 2398

Rubber hoses, textile-reinforced, for compressed air — Specification

This document specifies the requirements for three types, three classes and two categories of textile-reinforced rubber hose for compressed air, up to a maximum working pressure of 2,5 MPa (25 bar) with an operating-temperature range of −40 °C to +70 °C, depending on the type and category.

Tuyaux en caoutchouc renforcés textile pour l'air comprimé — Spécifications

Le présent document spécifie les exigences pour trois types, trois classes et deux catégories de tuyaux en caoutchouc renforcés textile pour l'air comprimé, pouvant être utilisés jusqu'à une pression maximale de service de 2,5 MPa (25 bar) et sur une plage de températures de service de −40 °C à +70 °C, en fonction du type et de la catégorie.

General Information

• Status: Not Published
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: ISO/TC 45/SC 1 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: ISO/TC 45/SC 1 - Rubber and plastics hoses and hose assemblies
• Current Stage: 6000 - International Standard under publication
• Completion Date: 22-Mar-2024

Relations

• Consolidates: ISO/TR 23262:2021 - GIS (geospatial) / BIM interoperability
• Effective Date: 06-Jun-2022
• Revises: ISO 2398:2016 - Rubber hoses, textile-reinforced, for compressed air — Specification
• Effective Date: 06-Jun-2022

Standards Content (Sample)

International
Standard
ISO 2398
Seventh edition
Rubber hoses, textile-reinforced, for
compressed air — Specification
Tuyaux en caoutchouc renforcés textile pour l'air comprimé —
Spécifications
PROOF/ÉPREUVE
Reference number
ISO 2398:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 2398:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 2398:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Materials and construction . 2
6 Dimensions . 2
6.1 Inside diameters and tolerances .2
6.2 Concentricity .3
6.3 Tolerance on length .3
6.4 Minimum thickness of lining and cover .3
7 Physical properties . 3
7.1 Rubber compounds .3
7.2 Finished hose .4
8 Frequency of testing . . 4
9 Test report or certificate . 5
10 Marking . . 5
Annex A (normative) Type tests and routine tests .
...

DRAFT INTERNATIONAL STANDARD
ISO/PRF 2398:2024(E)
ISO /TC 45/SC 1/WG 1
Date: 2024-01-19
Secretariat: DIN
Date: 2024-02-23
Rubber hoses, textile-reinforced, for compressed air — Specification
Tuyaux en caoutchouc renforcés textile pour l'air comprimé — Spécifications
PROOF

---------------------- Page: 1 ----------------------
ISO/PRF 2398:2024(Een)
© ISO 20232024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Fax: [phone]
EmailE-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2024 – All rights reserved
© ISO 2024 – All rights reserved

ii

---------------------- Page: 2 ----------------------
ISO/PRF 2398:2024(Een)
Contents
Foreword iv
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Classification 2
5 Materials and construction 2
6 Dimensions 2
6.1 Inside diameters and tolerances 2
6.2 Concentricity 3
6.3 Tolerance on length 3
6.4 Minimum thickness of lining and cover 3
7 Physical properties 4
7.1 Rubber compounds 4
Table 2 — Physical properties of rubber compounds 4
7.2 Finished hose 4
Table 3 — Physical properties of finished hose 4
8 Frequency of testing 5
9 Test report or certificate 5
10 Marking 5
Annex A (normative) Type tests and routine tests 7
Bibliography .9Foreword
. v
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Classification .2
5 Materials and construction .2
6 Dimensions .2
6.1 Inside diameters and tolerances .2
6.2 Concentricity .3
6.3 Tolerance on length .3
6.4 Minimum thickness of lining and cover .3
7 Physical properties .4
7.1 Rubber compounds .4
7.2 Finished hose .4
8 Frequency of testing .5
© ISO 2023 – All rights reserved iii
© ISO 2024 –
...