ISO 17064:2004
(Main)Wood-based panels — Fibreboard, particleboard and oriented strand board (OSB) — Vocabulary
Wood-based panels — Fibreboard, particleboard and oriented strand board (OSB) — Vocabulary
ISO 17064:2004 provides definitions and terminology applying to all types of fibreboard, particleboard and oriented strand board (OSB).
Panneaux à base de bois — Panneaux de fibres, de particules et de particules orientées — Vocabulaire
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 17064
First edition
2004-03-01
Wood-based panels — Fibreboard,
particleboard and oriented strand board
(OSB) — Vocabulary
Panneaux à base de bois — Panneaux de fibres, de particules et de
particules orientées — Vocabulaire
Reference number
ISO 17064:2004(E)
©
ISO 2004
---------------------- Page: 1 ----------------------
ISO 17064:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2004
The reproduction of the terms and definitions contained in this International Standard is permitted in teaching manuals, instruction
booklets, technical publications and journals for strictly educational or implementation purposes. The conditions for such reproduction are:
that no modifications are made to the terms and definitions; that such reproduction is not permitted for dictionaries or similar publications
offered for sale; and that this International Standard is referenced as the source document.
With the sole exceptions noted above, no other part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2004 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 17064:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17064 was prepared by Technical Committee ISO/TC 89, Wood-based panels, Subcommittees SC 1,
Fibre boards and SC 2, Particle boards.
© ISO 2004 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 17064:2004(E)
Introduction
This International Standard was originally prepared by Subcommittee SC 1, Fibre boards. Initially, a separate
document (ISO/CD 17065) had been prepared by Subcommittee SC 2, Particle boards, to cover the
definitions and terminology of particleboard, but as the work progressed the subcommittee realized that, owing
to many common terms, the best option was to combine the two documents. The work on the combined draft
was carried out jointly by Subcommittees SC 1 and SC 2 and is contained in this International Standard.
Separate documents wil
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.