ISO 12829:2023

Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope

This document specifies methods for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope (i.e. the filter housing) of a spin-on hydraulic filter with a disposable filter element and a finite life.

Filtres hydrauliques à visser ayant une durée de vie spécifiée — Méthode de vérification de la durée de vie nominale en fatigue et de la pression statique d'éclatement nominale de l'enveloppe sous pression

ISO 12829:2016 spécifie des méthodes de vérification de la durée de vie nominale en fatigue et de la pression statique d'éclatement nominale de l'enveloppe sous pression (c'est-à-dire du corps du filtre) d'un filtre hydraulique à visser ayant un élément filtrant jetable et une durée de vie spécifiée. La durée d'utilisation du corps de ce type de filtre est relativement réduite, une durée de vie nominale en fatigue de 100 000 cycles est donc considérée comme suffisante pour des applications industrielles courantes.

General Information

• Status: Published
• Publication Date: 20-Nov-2023
• ICS: 23.100.60 - Filters, seals and contamination of fluids
• Technical Committee: ISO/TC 131/SC 6 - Contamination control
• Drafting Committee: ISO/TC 131/SC 6 - Contamination control
• Current Stage: 6060 - International Standard published
• Start Date: 21-Nov-2023
• Due Date: 13-Apr-2024
• Completion Date: 21-Nov-2023

Relations

• Revises: ISO 12829:2016 - Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 12829
Second edition
2023-11
Hydraulic spin-on filters with finite
lives — Method for verifying the rated
fatigue life and the rated static burst
pressure of the pressure-containing
envelope
Filtres hydrauliques à visser ayant une durée de vie spécifiée —
Méthode de vérification de la durée de vie nominale en fatigue et de la
pression statique d'éclatement nominale de l'enveloppe sous pression
Reference number
ISO 12829:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 12829:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 12829:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Samples . 2
5 Cyclic endurance test to verify the rated fatigue life at a rated fatigue pressure .2
5.1 Apparatus . 2
5.2 Test conditions . 3
5.3 Test procedure . 3
5.4 Failure criteria . 4
5.5 Calculation of rated fatigue life at rated fatigue pressure . 4
5.6 Verification . . 5
6 Burst test to verify the rated static burst pressure. 5
6.1 Apparatus . 5
6.2 Test conditions . 5
6.3 Test procedure . 5
6.4 Failure criteria .
...

INTERNATIONAL ISO
STANDARD 12829
Second edition
Hydraulic spin-on filters with finite
lives — Method for verifying the rated
fatigue life and the rated static burst
pressure of the pressure-containing
envelope
Filtres hydrauliques à visser ayant une durée de vie spécifiée —
Méthode de vérification de la durée de vie nominale en fatigue et de la
pression statique d'éclatement nominale de l'enveloppe sous pression
PROOF/ÉPREUVE
Reference number
ISO 12829:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 12829:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 12829:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Samples . 2
5 Cyclic endurance test to verify the rated fatigue life at a rated fatigue pressure .2
5.1 Apparatus . 2
5.2 Test conditions . 3
5.3 Test procedure . 3
5.4 Failure criteria . 4
5.5 Calculation of rated fatigue life at rated fatigue pressure . 4
5.6 Verification . . 5
6 Burst test to verify the rated static burst pressure. 5
6.1 Apparatus . 5
6.2 Test conditions . 5
6.3 Test procedure . 5
6.4 Failure criteria .
...

ISO/DISPRF 12829:2023(E)
ISO/TC 131/SC 6/WG 2
Secretariat: BSI
Date: 2023-06-1309-28
Hydraulic spin-on filters with finite lives — Method for verifying
the rated fatigue life and the rated static burst pressure of the
pressure-containing envelope
Filtres hydrauliques vissés à visser ayant une durée de vie finie spécifiée — Méthode de vérification de la
résistance à ladurée de vie nominale en fatigue et de la pression statique d'éclatement du corps de
filtrenominale de l'enveloppe sous pression
FDIS stage

---------------------- Page: 1 ----------------------
ISO/DISPRF 12829:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/PRF 12829:2023(E)
Contents
Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Samples . 2
5 Cyclic endurance test to verify the rated fatigue life at a rated fatigue pressure . 2
5.1 Apparatus . 2
5.2 Test conditions . 3
5.3 Test procedure . 4
5.4 Failure criteria . 6
5.5 Calculation of rated fatigue life at rated fatigue pressure . 6
5.6 Verification . 6
6 Burst test to verify the rated static burst pressure . 6
6.1 Apparatus . 6
6.2 Test conditions . 6
6.3 Test procedure . 7
6.4 Failure criteria . 7
6.5 Calculation of rated static burst pressure . 7
6.6 Verification .
...