ISO/IEC 7816-4:2020/Amd 1

Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange — Amendment 1: Support of multiple logical security devices

Cartes d'identification — Cartes à circuit intégré — Partie 4: Organisation, sécurité et commandes pour les échanges — Amendement 1: Prise en charge de plusieurs dispositifs de sécurité logiques

General Information

• Status: Not Published
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Drafting Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Current Stage: 6000 - International Standard under publication
• Completion Date: 27-Sep-2023

Relations

• Amends: ISO/IEC 7816-4:2020 - Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 7816-4
Fourth edition
2020-05
AMENDMENT 1
Identification cards — Integrated
circuit cards —
Part 4:
Organization, security and commands
for interchange
AMENDMENT 1: Support of multiple
logical security devices
Cartes d'identification — Cartes à circuit intégré —
Partie 4: Organisation, sécurité et commandes pour les échanges
AMENDEMENT 1: Prise en charge de plusieurs dispositifs de sécurité
logiques
PROOF/ÉPREUVE
Reference number
ISO/IEC 7816-4/Amd. 1:2023(E)
© ISO/IEC 2023

---------------------- Page: 1 ----------------------
ISO/IEC 7816-4/Amd. 1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO/IEC 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 7816-4/Amd. 1:2023(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance
are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria
needed for the different types of document should be noted. This document was drafted in
accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of
any claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC
had not received notice of (a) patent(s) which may be required to implement this document. However,
implementers are cautioned that this may not represent the latest information, which may be obtained
from the patent database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall
not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 17, Cards and security devices for personal identification.
A list of all parts in the ISO/IEC 7816 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at www.iso.org/members.html and
www.iec.ch/national-committees.
iii
© ISO/IEC 2023 – All rights reserved PROOF/ÉPREUVE

---------------------- Page: 3 ----------------------
ISO/IEC 7816-4/Amd. 1:2023(E)
Identification cards — Integrated circuit cards —
Part 4:
Organization, security and commands for interchange
AMENDMENT 1: Support of multiple logical security devices
Clause 3
Add the following term and definition at the end of Clause 3:
3.68
logical security device
collection of resources of the physical ICC, build for a logical view as a virtual ICC
Table 4
Add the following new entry after MANAGE DATA entry:
MANAGE LOGICAL SECURITY DEVICE
'7C' 11.9
Table 5
Add the following new entry after MANAGE CHANNEL entry:
MANAGE LOGICAL SECURITY DEVICE
'7C' 11.9
Clause 7
Add the following subclauses after the last subclause in Clause 7:
7.5  Multiple logical security device
7.5.1  Concept of logical security devices
Logical resources ar
...

2023-07-18
ISO/IEC 7816-4:2020/DAMPRF Amd 1:2023(E)
ISO/IEC JTC 1/SC 17
Secretariat: BSI
Date: 2023-08-29
Identification cards — Integrated circuit cards — —
Part 4:
Organization, security and commands for interchange

AMENDMENT 1: Support of multiple logical security devices
Cartes d'identification — Cartes à circuit intégré — —
Partie 4: Organisation, sécurité et commandes pour les échanges

AMENDEMENT 1: SupportPrise en charge de multiple éléments sécurisés virtuelsplusieurs dispositifs de
sécurité logiques

---------------------- Page: 1 ----------------------
ISO/IEC 7816-4:2020/PRF Amd 1(E)
© ISO 2023/IEC 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO/IEC 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 7816-4:2020/PRF Amd 1(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of document should be noted. This document was drafted in accordance with the editorial
rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directiveswww.iso.org/directives or
www.iec.ch/members_experts/refdocswww.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any
claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC
[had/had not] received notice of (a) patent(s) which may be required to implement this document.
However, implementers are cautioned that this may not represent the latest information, which may be
obtained from the patent database available at www.iso.org/patents and
https://patents.iec.ch.www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be held
responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html.www.iso.org/iso/foreword.html. In the IEC, see
www.iec.ch/understanding-standardswww.iec.ch/understanding-standards.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 17, Cards and security devices for personal identification.
A list of all parts in the ISO/IEC 7816 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.htmlwww.iso.org/members.html
and www.iec.ch/national-committeeswww.iec.ch/national-committees.
© ISO/IEC 2023 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 7816-4:2020/PRF Amd 1(E)
Identification cards — Integrated circuit cards —
—
Part 4:
Organization, security and commands for interchange


AMENDMENT 1: Support of multiple logical security devices

Clause 3
Add the following subclause term and definition at the end of Clause 3:
3.68
logical security device
collection of resources of the physical ICC, build for a logical view as a virtual ICC

Table 4
Add the following new entry after MANAGE DATA entry:
'7C
MANAGE LOGICAL SECURITY DEVICE
...