ISO/IEC 14443-2:2020/Cor 2:2023
(Corrigendum)Cards and security devices for personal identification — Contactless proximity objects — Part 2: Radio frequency power and signal interface — Technical Corrigendum 2
Cards and security devices for personal identification — Contactless proximity objects — Part 2: Radio frequency power and signal interface — Technical Corrigendum 2
Cartes et dispositifs de sécurité pour l'identification personnelle — Objets sans contact de proximité — Partie 2: Interface radiofréquence et des signaux de communication — Rectificatif technique 2
General Information
Relations
Standards Content (Sample)
ISO/IEC 14443-2:2020/Cor.2:2023(E)
INTERNATIONAL STANDARD ISO/IEC 14443-2:2020
TECHNICAL CORRIGENDUM 2
Published 2023-09
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
INTERNATIONAL ELECTROTECHNICAL COMMISSION • МЕЖДУНАРОДНАЯ ЭЛЕКТРОТЕХНИЧЕСКАЯ КОМИССИЯ • COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
Cards and security devices for personal identification —
Contactless proximity objects — Part 2: Radio frequency
power and signal interface
TECHNICAL CORRIGENDUM 2
Cartes et dispositifs de sécurité pour l'identification personnelle — Objets sans contact de proximité —
Partie 2: Interface radiofréquence et des signaux de communication
RECTIFICATIF TECHNIQUE 2
Technical Corrigendum 2 to ISO/IEC 14443-2:2020 was prepared by Joint Technical Committee
ISO/IEC JTC 1, Information technology, Subcommittee SC 17, Cards and security devices for personal
identification.
ICS 35.240.15 Ref. No. ISO/IEC 14443-2:2020/Cor.2:2023(E)
© ISO/IEC 2023 – All rights reserved
Published in Switzerland
---------------------- Page: 1 ----------------------
ISO/IEC 14443-2:2020/Cor.2:2023(E)
Blank page
2 © ISO/IEC 2023 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 14443-2:2020/Cor.2:2023(E)
Cards and security devices for personal identification —
Contactless proximity objects — Part 2: Radio frequency
power and signal interface
TECHNICAL CORRIGENDUM 2
Page 25, 8.2.2.3
Replace all of the text in the subclause before Figure 13 by the following:
For each subcarrier period:
— Ø is defined as the argument of all differences between sections in the occurrence of MS1 and the
LM
corresponding sections in the occurrence of MS2 in the same subcarrier period, as illustrated in
Figure 13;
— there is an absolute maximum and an absolute minimum of Ø ; Ø’ is defined as the one which
LM LM
occurs first in time, Ø’’LM is the one which occurs secondly, then
ΔØ = Ø’’ – Ø’ ;
LM LM LM
— with Ø being the maximum absolute difference between Ø’ and any Ø occurring before Ø’
LM-le
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.