ISO/IEC/IEEE 8802-1AB:2017/Amd 2:2023

Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1AB: Station and media access control connectivity discovery — Amendment 2: Support for multiframe protocol data units

Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1AB: Découverte de connectivité des stations et du contrôle d'accès aux supports — Amendement 2: Support pour les unités de données de protocole multitrame

General Information

• Status: Published
• Publication Date: 09-Jul-2023
• ICS: 35.110 - Networking
• Technical Committee: ISO/IEC JTC 1/SC 6 - Telecommunications and information exchange between systems
• Drafting Committee: ISO/IEC JTC 1/SC 6 - Telecommunications and information exchange between systems
• Current Stage: 6060 - International Standard published
• Start Date: 06-Jul-2023
• Due Date: 22-Sep-2025
• Completion Date: 10-Jul-2023

Relations

• Amends: ISO/IEC/IEEE 8802-1AB:2017 - Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1AB: Station and media access control connectivity discovery
• Effective Date: 24-Sep-2022

Standards Content (Sample)

INTERNATIONAL ISO/
STANDARD IEC/IEEE
8802-1AB
Second edition
2017-07
AMENDMENT 2
2023-07
Information technology —
Telecommunications and information
exchange between systems — Local
and metropolitan area networks —
Specific requirements —
Part 1AB:
Station and media access control
connectivity discovery
AMENDMENT 2: Support for multiframe
protocol data units
Technologies de l'information — Télécommunications et échange
d'information entre systèmes — Réseaux locaux et métropolitains —
Exigences spécifiques —
Partie 1AB: Découverte de connectivité des stations et du contrôle
d'accès aux supports
AMENDEMENT 2: Support pour les unités de données de protocole
multitrame
Reference number
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
© IEEE 2022

---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© IEEE 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: [e-mail]
Website: www.ieee.org
Published in Switzerland
ii
 © IEEE 2022 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for
the different types of ISO/IEC documents should be noted. This document was drafted in accordance
with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details
of any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC list of patent
declarations received (see https://patents.iec.ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),
see www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.
ISO/IEC/IEEE 8802-1AB:2017/Amd.2 was prepared by the LAN/MAN of the IEEE Computer Society (as
IEEE 802.1ABdh-2021) and drafted in accordance with its editorial rules. It was adopted, under the “fast-
track procedure” defined in the Partner Standards Development Organization cooperation agreement
between ISO and IEEE, by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 6, Telecommunications and information exchange between systems.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.
© IEEE 2022 – All rights reserved iii

---------------------- Page: 3 ----------------------
,(((6WG$%GKŒ
$PHQGPHQWWR,(((6WG$%Œ
DVDPHQGHGE\,(((6WG$%FXŒ
,(((6WDQGDUGIRU
/RFDODQGPHWURSROLWDQDUHDQHWZRUNV²
6WDWLRQDQG0HGLD$FFHVV&RQWURO
&RQQHFWLYLW\'LVFRYHU\
$PHQGPHQW6XSSRUWIRU0XOWLIUDPH
3URWRFRO'DWD8QLWV
'HYHORSHGE\WKH
/$10$16WDQGDUGV&RPPLWWHH
RIWKH
,(((&RPSXWHU6RFLHW\
$SSURYHG'HFHPEHU
,(((6$6WDQGDUGV%RDUG

---------------------- Page: 4 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
$EVWUDFW7KLVDPHQGPHQWWR,(((6WG$%ŒVSHFLILHVSURWRFROVSURFHGXUHVDQG
PDQDJHGREMHFWVWKDWVXSSRUWWKHWUDQVPLVVLRQDQGUHFHSWLRQRIDVHWRI/LQN/D\HU'LVFRYHU\
3URWRFRO//'37\SH/HQJWK9DOXHV7/9VWKDWH[FHHGWKHVSDFHDYDLODEOHLQDVLQJOHIUDPH
Š
.H\ZRUGV ,(((  ,((($%Œ ,((( $%GKŒOLQN OD\HUGLVFRYHU\SURWRFRO
PDQDJHPHQWLQIRUPDWLRQEDVHPXOWLIUDPH//'3'8VWRSRORJ\GLVFRYHU\WRSRORJ\LQIRUPDWLRQ
7KH,QVWLWXWHRI(OHFWULFDODQG(OHFWURQLFV(QJLQHHUV,QF
3DUN$YHQXH1HZ &RS\ULJKW‹E\7KH,QVWLWXWHRI(OHFWULFDODQG(OHFWURQLFV(QJLQHHUV,QF
$OOULJKWVUHVHUYHG3XEOLVKHG$SULO3ULQWHGLQWKH8QLWHG6WDWHVRI$PHULFD
,(((DQGDUHUHJLVWHUHGWUDGHPDUNVLQWKH863DWHQW 7UDGHPDUN2IILFHRZQHGE\7KH,QVWLWXWHRI(OHFWULFDODQG
(OHFWURQLFV(QJLQHHUV,QFRUSRUDWHG
3'),6%167'
3ULQW,6%167'3'
IEEE prohibits discrimination, harassment and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior
written permission of the publisher.

---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
,PSRUWDQW1RWLFHVDQG'LVFODLPHUV&RQFHUQLQJ,(((6WDQGDUGV
'RFXPHQWV
,(((6WDQGDUGVGRFXPHQWVDUHPDGHDYDLODEOHIRUXVHVXEMHFWWRLPSRUWDQWQRWLFHVDQGOHJDOGLVFODLPHUV
7KHVHQRWLFHVDQGGLVFODLPHUVRUDUHIHUHQFHWRWKLVSDJHKWWSVVWDQGDUGVLHHHRUJLSUGLVFODLPHUVKWPO
DSSHDULQDOOVWDQGDUGVDQGPD\EHIRXQGXQGHUWKHKHDGLQJ³,PSRUWDQW1RWLFHVDQG'LVFODLPHUV&RQFHUQLQJ
,(((6WDQGDUGV'RFXPHQWV´
1RWLFHDQG'LVFODLPHURI/LDELOLW\&RQFHUQLQJWKH8VHRI,(((6WDQGDUGV
'RFXPHQWV
,(((6WDQGDUGVGRFXPHQWVDUHGHYHORSHGZLWKLQWKH,(((6RFLHWLHVDQGWKH6WDQGDUGV&RRUGLQDWLQJ
&RPPLWWHHVRIWKH,(((6WDQGDUGV$VVRFLDWLRQ,(((6$6WDQGDUGV%RDUG,(((GHYHORSVLWVVWDQGDUGV
WKURXJKDQDFFUHGLWHGFRQVHQVXVGHYHORSPHQWSURFHVVZKLFKEULQJVWRJHWKHUYROXQWHHUVUHSUHVHQWLQJYDULHG
YLHZSRLQWV DQG LQWHUHVWV WR DFKLHYH WKH ILQDO SURGXFW ,((( 6WDQGDUGV DUH GRFXPHQWV GHYHORSHG E\
YROXQWHHUVZLWKVFLHQWLILFDFDGHPLFDQGLQGXVWU\EDVHGH[SHUWLVHLQWHFKQLFDOZRUNLQJJURXSV9ROXQWHHUV
DUHQRWQHFHVVDULO\PHPEHUVRI,(((RU,(((6$DQGSDUWLFLSDWHZLWKRXWFRPSHQVDWLRQIURP,(((:KLOH
,(((DGPLQLVWHUVWKHSURFHVVDQGHVWDEOLVKHVUXOHVWRSURPRWHIDLUQHVVLQWKHFRQVHQVXVGHYHORSPHQW
SURFHVV,(((GRHVQRWLQGHSHQGHQWO\HYDOXDWHWHVWRUYHULI\WKHDFFXUDF\RIDQ\RIWKHLQIRUPDWLRQRUWKH
VRXQGQHVVRIDQ\MXGJPHQWVFRQWDLQHGLQLWVVWDQGDUGV
,((( PDNHV QR ZDUUDQWLHV RU UHSUHVHQWDWLRQV FRQFHUQLQJ LWV VWDQGDUGV DQG H[SUHVVO\ GLVFODLPV DOO
ZDUUDQWLHVH[SUHVVRULPSOLHGFRQFHUQLQJWKLVVWDQGDUGLQFOXGLQJEXWQRWOLPLWHGWRWKHZDUUDQWLHVRI
PHUFKDQWDELOLW\ILWQHVVIRUDSDUWLFXODUSXUSRVHDQGQRQLQIULQJHPHQW,QDGGLWLRQ,(((GRHVQRWZDUUDQWRU
UHSUHVHQWWKDWWKHXVHRIWKHPDWHULDOFRQWDLQHGLQLWVVWDQGDUGVLVIUHHIURPSDWHQWLQIULQJHPHQW,(((
VWDQGDUGVGRFXPHQWVDUHVXSSOLHG³$6,6´DQG³:,7+$//)$8/76´
8VHRIDQ,(((VWDQGDUGLVZKROO\YROXQWDU\7KHH[LVWHQFHRIDQ,(((6WDQGDUGGRHVQRWLPSO\WKDWWKHUH
DUHQRRWKHUZD\VWRSURGXFHWHVWPHDVXUHSXUFKDVHPDUNHWRUSURYLGHRWKHUJRRGVDQGVHUYLFHVUHODWHGWR
WKHVFRSHRIWKH,(((VWDQGDUG)XUWKHUPRUHWKHYLHZSRLQWH[SUHVVHGDWWKHWLPHDVWDQGDUGLVDSSURYHGDQG
LVVXHGLVVXEMHFWWRFKDQJHEURXJKWDERXWWKURXJKGHYHORSPHQWVLQWKHVWDWHRIWKHDUWDQGFRPPHQWV
UHFHLYHGIURPXVHUVRIWKHVWDQGDUG
,QSXEOLVKLQJDQGPDNLQJLWVVWDQGDUGVDYDLODEOH,(((LVQRWVXJJHVWLQJRUUHQGHULQJSURIHVVLRQDORURWKHU
VHUYLFHVIRURURQEHKDOIRIDQ\SHUVRQRUHQWLW\QRULV,(((XQGHUWDNLQJWRSHUIRUPDQ\GXW\RZHGE\DQ\
RWKHUSHUVRQRUHQWLW\WRDQRWKHU$Q\SHUVRQXWLOL]LQJDQ\,(((6WDQGDUGVGRFXPHQWVKRXOGUHO\XSRQKLV
RUKHURZQLQGHSHQGHQWMXGJPHQWLQWKHH[HUFLVHRIUHDVRQDEOHFDUHLQDQ\JLYHQFLUFXPVWDQFHVRUDV
DSSURSULDWHVHHNWKHDGYLFHRIDFRPSHWHQWSURIHVVLRQDOLQGHWHUPLQLQJWKHDSSURSULDWHQHVVRIDJLYHQ,(((
VWDQGDUG
,112(9(176+$//,(((%(/,$%/()25$1<',5(&7,1',5(&7,1&,'(17$/63(&,$/
(;(03/$5<25&216(48(17,$/'$0$*(6,1&/8',1*%87127/,0,7('727+(
1(('72352&85(68%67,787(*22'6256(59,&(6/2662)86('$7$25352),76
25%86,1(66,17(55837,21+2:(9(5&$86('$1'21$1<7+(25<2)/,$%,/,7<
:+(7+(5 ,1 &2175$&7 675,&7 /,$%,/,7< 25 7257 ,1&/8',1* 1(*/,*(1&( 25
27+(5:,6($5,6,1*,1$1<:$<2872)7+(38%/,&$7,2186(2)255(/,$1&(
8321$1<67$1'$5'(9(1,)$'9,6('2)7+(3266,%,/,7<2)68&+'$0$*($1'
5(*$5'/(662):+(7+(568&+'$0$*(:$6)25(6(($%/(

&RS\ULJKW‹,((($OOULJKWVUHVHUYHG

---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE is the approved IEEE
standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, nor be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that the presenter's views should be considered the personal views of that individual rather than
the formal position of IEEE, IEEE SA, the Standards Committee, or the Working Group.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE or IEEE SA. However, IEEE does not provide interpretations,
consulting information, or advice pertaining to IEEE Standards documents.
Suggestions for changes in documents should be in the form of a proposed change of text, together with
appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is
important that any responses to comments and questions also receive the concurrence of a balance of
interests. For this reason, IEEE and the members of its Societies and Standards Coordinating Committees
are not able to provide an instant response to comments, or questions except in those cases where the matter
has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any
person who would like to participate in evaluating comments or in revisions to an IEEE standard is welcome
to join the relevant IEEE working group. You can indicate interest in a working group using the Interests tab
1
in the Manage Profile & Interests area of the IEEE SA myProject system. An IEEE Account is needed to
access the application.
2
Comments on standards should be submitted using the Contact Us form.
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the
provisions of any IEEE Standards document does not constitute compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Data privacy
Users of IEEE Standards documents should evaluate the standards for considerations of data privacy and
data ownership in the context of assessing and using the standards in compliance with applicable laws and
regulations.
1
Available at: https://development.standards.ieee.org/myproject-web/public/view.html#landing.
2
Available at: https://standards.ieee.org/content/ieee-standards/en/about/contact/index.html.
4
Copyright © 2022 IEEE. All rights reserved.

---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
Photocopies
Subject to payment of the appropriate licensing fees, IEEE will grant users a limited, non-exclusive license
to photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; [phone]; https://
www.copyright.com/. Permission to photocopy portions of any individual standard for educational
classroom use can also be obtained through the Copyright Clearance Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
3
through the issuance of amendments, corrigenda, or errata, visit IEEE Xplore or contact IEEE. For more
information about the IEEE SA or IEEE's standards development process, visit the IEEE SA Website.
Errata
4
Errata, if any, for all IEEE standards can be accessed on the IEEE SA Website. Search for standard number
and year of approval to access the web page of the published standard. Errata links are located under the
Additional Resources Details section. Errata are also available in IEEE Xplore. Users are encouraged to
periodically check for errata.
Patents
5
IEEE Standards are developed in compliance with the IEEE SA Patent Policy.
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the
existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has
3
Available at: https://ieeexplore.ieee.org/browse/standards/collection/ieee.
4
Available at: https://standards.ieee.org/standard/index.html.
5
Available at: https://standards.ieee.org/about/sasb/patcom/materials.html.
5
Copyright © 2022 IEEE. All rights reserved.

---------------------- Page: 8 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
ILOHGDVWDWHPHQWRIDVVXUDQFHYLDDQ$FFHSWHG/HWWHURI$VVXUDQFHWKHQWKHVWDWHPHQWLVOLVWHGRQWKH
,(((6$:HEVLWHDWKWWSVVWDQGDUGVLHHHRUJDERXWVDVESDWFRPSDWHQWVKWPO/HWWHUVRI$VVXUDQFHPD\
LQGLFDWH ZKHWKHU WKH6XEPLWWHU LV ZLOOLQJRU XQZLOOLQJ WRJUDQWOLFHQVHVXQGHUSDWHQW ULJKWV ZLWKRXW
FRPSHQVDWLRQRUXQGHUUHDVRQDEOHUDWHVZLWKUHDVRQDEOHWHUPVDQGFRQGLWLRQVWKDWDUHGHPRQVWUDEO\IUHHRI
DQ\XQIDLUGLVFULPLQDWLRQWRDSSOLFDQWVGHVLULQJWRREWDLQVXFKOLFHQVHV
(VVHQWLDO3DWHQW&ODLPVPD\H[LVWIRUZKLFKD/HWWHURI$VVXUDQFHKDVQRWEHHQUHFHLYHG7KH,(((LVQRW
UHVSRQVLEOHIRULGHQWLI\LQJ(VVHQWLDO3DWHQW&ODLPVIRUZKLFKDOLFHQVHPD\EHUHTXLUHGIRUFRQGXFWLQJ
LQTXLULHVLQWRWKHOHJDOYDOLGLW\RUVFRSHRI3DWHQWV&ODLPVRUGHWHUPLQLQJZKHWKHUDQ\OLFHQVLQJWHUPVRU
FRQGLWLRQVSURYLGHGLQFRQQHFWLRQZLWKVXEPLVVLRQRID/HWWHURI$VVXUDQFHLIDQ\RULQDQ\OLFHQVLQJ
DJUHHPHQWV DUH UHDVRQDEOH RU QRQGLVFULPLQDWRU\ 8VHUV RI WKLV VWDQGDUG DUH H[SUHVVO\ DGYLVHG WKDW
GHWHUPLQDWLRQRIWKHYDOLGLW\RIDQ\SDWHQWULJKWVDQGWKHULVNRILQIULQJHPHQWRIVXFKULJKWVLVHQWLUHO\WKHLU
RZQUHVSRQVLELOLW\)XUWKHULQIRUPDWLRQPD\EHREWDLQHGIURPWKH,(((6WDQGDUGV$VVRFLDWLRQ
,03257$17127,&(
,(((6WDQGDUGVGRQRWJXDUDQWHHRUHQVXUHVDIHW\VHFXULW\KHDOWKRUHQYLURQPHQWDOSURWHFWLRQRUHQVXUH
DJDLQVWLQWHUIHUHQFHZLWKRUIURPRWKHUGHYLFHVRUQHWZRUNV,(((6WDQGDUGVGHYHORSPHQWDFWLYLWLHVFRQVLGHU
UHVHDUFK DQG LQIRUPDWLRQ SUHVHQWHG WR WKH VWDQGDUGV GHYHORSPHQW JURXS LQ GHYHORSLQJ DQ\ VDIHW\
UHFRPPHQGDWLRQV 2WKHU LQIRUPDWLRQ DERXW VDIHW\ SUDFWLFHV FKDQJHV LQ WHFKQRORJ\ RU WHFKQRORJ\
LPSOHPHQWDWLRQRULPSDFWE\SHULSKHUDOV\VWHPVDOVRPD\EHSHUWLQHQWWRVDIHW\FRQVLGHUDWLRQVGXULQJ
LPSOHPHQWDWLRQRIWKHVWDQGDUG,PSOHPHQWHUVDQGXVHUVRI,(((6WDQGDUGVGRFXPHQWVDUHUHVSRQVLEOHIRU
GHWHUPLQLQJDQGFRPSO\LQJZLWKDOODSSURSULDWHVDIHW\VHFXULW\HQYLURQPHQWDOKHDOWKDQGLQWHUIHUHQFH
SURWHFWLRQSUDFWLFHVDQGDOODSSOLFDEOHODZVDQGUHJXODWLRQV

&RS\ULJKW‹,((($OOULJKWVUHVHUYHG

---------------------- Page: 9 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
3DUWLFLSDQWV
$WWKHWLPHWKLVDPHQGPHQWZDVVXEPLWWHGWRWKH,(((6$6WDQGDUGV%RDUGIRUDSSURYDOWKH,(((
:RUNLQJ*URXSKDGWKHIROORZLQJPHPEHUVKLS
*OHQQ3DUVRQVChair
-HVV\5RX\HUVice-Chair
-iQRV)DUNDVChair, Time-Sensitive Networking Task Group
&UDLJ*XQWKHUVice-Chair, Time-Sensitive Networking Task Group
6WHSKHQ+DGGRFN Editor
$VWULW$GHPDM $WVXVKL6DWR
5DOI$VVPDQQ 0LFKDHO.DUO
)UDQN6FKHZH
9HQNDW$UXQDUWKL 6WHSKDQ.HKUHU
0LFKDHO6HDPDQ
5XG\%HOOLDUGL 0DUFHO.LHVVOLQJ
0DLN6HHZDOG
5DQG\.HOVH\
&KULVWLDQ%RLJHU
5DPHVK6LYDNROXQGX
3DXO%RWWRUII *DYLQ/DL
-RKDQQHV6SHFKW
5DGKDNULVKQD&DQFKL -DPHV/DZOLV
0DULXV6WDQLFD
)HQJ&KHQ -RDR/RSHV
*XHQWHU6WHLQGO
/LO\/Y
$EKLMLW&KRXGKXU\
/L\DQJ6XQ
3DXO&RQJGRQ &KULVWRSKH0DQJLQ
.DULP7UDRUH
5RGQH\&XPPLQJV 6FRWW0DQVILHOG
0D[7XUQHU
-RVHI'RUU .HQLFKL0DUXKDVKL
%DOD]V9DUJD
+HVKDP(OEDNRXU\ 2ODI0DWHU
*DQHVK9HQNDWHVDQ
$QQD(QJHOPDQQ 'DYLG0F&DOO
7RQJWRQJ:DQJ
7KRPDV(Q]LQJHU /DUU\0F0LOODQ
;LQ\XDQ:DQJ
'RQDOG)HG\N -RKQ0HVVHQJHU
.DUO:HEHU
1RUPDQ)LQQ +LURNL1DNDQR
/HRQ:HVVHOV
*HRIIUH\*DUQHU +LURVKL2KXH
/XGZLJ:LQNHO
$PULW*RSDO 'RQDOG53DQQHOO
-RUGRQ:RRGV
5D]YDQ3HWUH
0DULQD*XWLHUUH]
7DNDKLUR 0DUN+DQWHO 0LFKDHO3RWWV
-HURPH+HQU\ 'LHWHU3URHOO
8ZH=HLHU
0DUF+ROQHVV :HL4LX
'DQLHO+RSI .DUHQ5DQGDOO 1DGHU=HLQ
:RRMXQJ+XK 0D[LPLOLDQ5LHJHO :LOOLDP=KDR
6DWRNR,WD\D 6LOYDQD5RGULJXHV +HOJH=LQQHU
7KHIROORZLQJPHPEHUVRIWKHLQGLYLGXDOEDOORWLQJFRPPLWWHHYRWHGRQWKLVVWDQGDUG%DOORWHUVPD\KDYH
YRWHGIRUDSSURYDOGLVDSSURYDORUDEVWHQWLRQ
7KRPDV$OH[DQGHU /RNHVK.DEUD 'LHWHU3URHOO
+DUU\%LPV 3LRWU.DURFNL $ORQ5HJHY
6WHSKDQ.HKUHU 0D[LPLOLDQ5LHJHO
&KULVWLDQ%RLJHU
5DQG\.HOVH\ -HVV\5RX\HU
9HUQ%UHWKRXU
6WXDUW.HUU\ )UDQN6FKHZH
:LOOLDP%\UG
(YJHQ\.KRURY 0LFKDHO6HDPDQ
3DXO&DUGLQDO
3LQ&KDQJ
+\HRQJ+R/HH :DOWHU6WUXSSOHU
'LHJR&KLR]]L
7LQJ/L 0LWVXWRVKL6XJDZDUD
-iQRV)DUNDV
&KULVWRSKH0DQJLQ %R6XQ
$YUDKDP)UHHGPDQ
6FRWW0DQVILHOG 0D[7XUQHU
&UDLJ*XQWKHU
-RQDWKRQ0FOHQGRQ -RKQ9HUJLV
6WHSKHQ+DGGRFN
6DWRVKL2EDUD 6WHSKHQ:HEE
0DUFR+HUQDQGH]
*OHQQ3DUVRQV .DUO:HEHU
:HUQHU+RHO]O
%DQVL3DWHO 6FRWW:LOO\
2OLYHU+ROODQG
$UXPXJDP3DYHQWKDQ 3UDQDY-KD &OLQWRQ3RZHOO 2UHQ 
&RS\ULJKW‹,((($OOULJKWVUHVHUYHG

---------------------- Page: 10 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
:KHQWKH,(((6$6WDQGDUGV%RDUGDSSURYHGWKLVVWDQGDUGRQ'HFHPEHULWKDGWKHIROORZLQJ
PHPEHUVKLS
*DU\+RIIPDQ Chair
-RQ:DOWHU5RVGDKOVice Chair
-RKQ'.XOLFNPast Chair
.RQVWDQWLQRV.DUDFKDOLRVSecretary
(GZDUG$$GG\ +RZDUG/L 0HKPHW8OHPD
'RXJ(GZDUGV 'DR]KXDQJ/LQ /HL:DQJ
5DP\$KPHG)DWK\ .HYLQ/X ).HLWK:DWHUV
-7UDYLV*ULIILWK 'DOHHS&0RKOD .DUO:HEHU
7KRPDV.RVK\ &KHQKXL1LX 6KD:HL
-RVHSK/.RHSILQJHU
'DPLU1RYRVHO +RZDUG:ROIPDQ
$QQHWWH5HLOO\ 'DLGL=KRQJ
'DYLG-/DZ
'RURWK\6WDQOH\

0HPEHU(PHULWXV

&RS\ULJKW‹,((($OOULJKWVUHVHUYHG

---------------------- Page: 11 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
,QWURGXFWLRQ
7KLVLQWURGXFWLRQLVQRWSDUWRI,(((6WG$%GK,(((6WDQGDUGIRU/RFDODQGPHWURSROLWDQDUHD
QHWZRUNV²6WDWLRQDQG0HGLD$FFHVV&RQWURO&RQQHFWLYLW\'LVFRYHU\²$PHQGPHQW6XSSRUWIRU0XOWLIUDPH
3URWRFRO'DWD8QLWV
7KHILUVWHGLWLRQRI,(((6WG$%ŒZDVSXEOLVKHGLQDQGUHYLVLRQVZHUHSXEOLVKHGLQDQG
$QDPHQGPHQW,(((6WG$%FXŒVSHFLILHVD8QLILHG0RGHOLQJ/DQJXDJH80/EDVHG
LQIRUPDWLRQPRGHODQGD<$1*GDWDPRGHO7KLVDPHQGPHQW,(((6WG$%GKŒVSHFLILHV
SURWRFROVSURFHGXUHVDQGPDQDJHGREMHFWVWKDWVXSSRUWWKHWUDQVPLVVLRQDQGUHFHSWLRQRIDVHWRI/LQN
/D\HU'LVFRYHU\3URWRFRO//'37\SH/HQJWK9DOXHV7/9VWKDWH[FHHGWKHVSDFHDYDLODEOHLQDVLQJOH
IUDPH

&RS\ULJKW‹,((($OOULJKWVUHVHUYHG

---------------------- Page: 12 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
&RQWHQWV
 'HILQLWLRQVDQGQXPHULFDOUHSUHVHQWDWLRQ
 'HILQLWLRQV
 $FURQ\PVDQGDEEUHYLDWLRQV
 &RQIRUPDQFH
 5HTXLUHGFDSDELOLWLHV
 3ULQFLSOHVRIRSHUDWLRQ
 7UDQVPLVVLRQDQGUHFHSWLRQ
 //'3RSHUDWLRQDOPRGHV
 7UDQVPLVVLRQSULQFLSOHV
 5HFHSWLRQSULQFLSOHV
 6\VWHPVZLWKPXOWLSOH//'3$JHQWV
 ([WHQGHG//'3;//'3
 //'3'8WUDQVPLVVLRQUHFHSWLRQDQGDGGUHVVLQJ
 'HVWLQDWLRQDGGUHVV
 6RXUFHDGGUHVV
 //'3'8UHFHSWLRQ
 //'3'8DQG7/9IRUPDWV
 //'3'8IRUPDW
 7/9FDWHJRULHV
 %DVLF7/9IRUPDW
 %DVLFPDQDJHPHQW7/9VHWIRUPDWVDQGGHILQLWLRQV
D ([WHQGHG//'3VHW7/9IRUPDWVDQGGHILQLWLRQV
 2UJDQL]DWLRQDOO\6SHFLILF7/9V
 //'3DJHQWRSHUDWLRQ
 2YHUYLHZ
 6WDWHPDFKLQHV
 //'3PDQDJHPHQW
 7KH//'3PDQDJHPHQWHQWLW\¶VUHVSRQVLELOLWLHV
$QQH[$ QRUPDWLYH 3,&6pURIRUPD 
$ 0DMRUFDSDELOLWLHVDQGRSWLRQV
$QQH['LQIRUPDWLYH %LEOLRJUDSK\

&RS\ULJKW‹,((($OOULJKWVUHVHUYHG

---------------------- Page: 13 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
,(((6WDQGDUGIRU
/RFDODQGPHWURSROLWDQDUHDQHWZRUNV²
6WDWLRQDQG0HGLD$FFHVV&RQWURO
&RQQHFWLYLW\'LVFRYHU\
$PHQGPHQW6XSSRUWIRU0XOWLIUDPH
3URWRFRO'DWD8QLWV
7KLVDPHQGPHQWLVEDVHGRQ,(((6WG$%ŒDVDPHQGHGE\,(((6WG$%FXŒ
127(²7KHHGLWLQJLQVWUXFWLRQVFRQWDLQHGLQWKLVDPHQGPHQWGHILQHKRZWRPHUJHWKHPDWHULDOFRQWDLQHGWKHUHLQLQWR
WKHH[LVWLQJEDVHVWDQGDUGDQGLWVDPHQGPHQWVWRIRUPWKHFRPSUHKHQVLYHVWDQGDUG
7KHHGLWLQJLQVWUXFWLRQVDUHVKRZQLQbold italic)RXUHGLWLQJLQVWUXFWLRQVDUHXVHGFKDQJHGHOHWHLQVHUWDQGUHSODFH
ChangeLVXVHGWRPDNHFRUUHFWLRQVLQH[LVWLQJWH[WRUWDEOHV7KHHGLWLQJLQVWUXFWLRQVSHFLILHVWKHORFDWLRQRIWKHFKDQJH
DQGGHVFULEHVZKDWLVEHLQJFKDQJHGE\XVLQJVWULNHWKURXJKWRUHPRYHROGPDWHULDODQGXQGHUVFRUHWRDGGQHZ
PDWHULDODeleteUHPRYHVH[LVWLQJPDWHULDOInsertDGGVQHZPDWHULDOZLWKRXWGLVWXUELQJWKHH[LVWLQJPDWHULDO'HOHWLRQV
DQGLQVHUWLRQVPD\UHTXLUHUHQXPEHULQJ,IVRUHQXPEHULQJLQVWUXFWLRQVDUHJLYHQLQWKHHGLWLQJLQVWUXFWLRQReplaceLV
XVHGWRPDNHFKDQJHVLQILJXUHVRUHTXDWLRQVE\UHPRYLQJWKHH[LVWLQJILJXUHRUHTXDWLRQDQGUHSODFLQJLWZLWKDQHZ
RQH(GLWLQJLQVWUXFWLRQVFKDQJHPDUNLQJVDQGWKLV127(ZLOOQRWEHFDUULHGRYHULQWRIXWXUHHGLWLRQVEHFDXVHWKH

FKDQJHVZLOOEHLQFRUSRUDWHGLQWRWKHEDVHVWDQGDUG

1RWHVLQWH[WWDEOHVDQGILJXUHVDUHJLYHQIRULQIRUPDWLRQRQO\DQGGRQRWFRQWDLQUHTXLUHPHQWVQHHGHGWRLPSOHPHQWWKHVWDQGDUG

&RS\ULJKW‹,((($OOULJKWVUHVHUYHG

---------------------- Page: 14 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
,(((6WG$%GK
,(((6WDQGDUGIRU/RFDODQGPHWURSROLWDQDUHDQHWZRUNV²6WDWLRQDQG0HGLD$FFHVV&RQWURO&RQQHFWLYLW\'LVFRYHU\²
$PHQGPHQW6XSSRUWIRU0XOWLIUDPH3URWRFRO'DWD8QLWV
'HILQLWLRQVDQGQXPHULFDOUHSUHVHQWDWLRQ
'HILQLWLRQV
Insert the following new definitions in 3.1 in alphanumerical order:
([WHQGHG/LQN/D\HU'LVFRYHU\3URWRFRO;//'3$Q//'3H[WHQVLRQXVHGWRUHWULHYHWKHIUDPHV
EH
...

FINAL
AMENDMENT ISO/IEC/IEEE
DRAFT
8802-
1AB:2017
FDAM 2
Second edition
2017-07
AMENDMENT 2
ISO/IEC JTC 1/SC 6
Information technology —
Secretariat: KATS
Telecommunications and information
Voting begins on:
2023-02-01 exchange between systems — Local
and metropolitan area networks —
Voting terminates on:
2023-06-21
Specific requirements —
Part 1AB:
Station and media access control
connectivity discovery
AMENDMENT 2: Support for multiframe
protocol data units
Technologies de l'information — Télécommunications et échange
d'information entre systèmes — Réseaux locaux et métropolitains —
Exigences spécifiques —
Partie 1AB: Découverte de connectivité des stations et du contrôle
d'accès aux supports
AMENDEMENT 2
This document is circulated as received from the committee secretariat.
FAST TRACK PROCEDURE
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEC/IEEE 8802-1AB:2017/FDAM
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
2:2023(E)
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
© ISO/IEC 2023
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © IEEE 2023

---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/FDAM 2:2023(E)
FINAL
AMENDMENT ISO/IEC/IEEE
DRAFT
8802-
1AB:2017
FDAM 2
Second edition
2017­07
AMENDMENT 2
ISO/IEC JTC 1/SC 6
Information technology —
Secretariat: KATS
Telecommunications and information
Voting begins on:
exchange between systems — Local
and metropolitan area networks —
Voting terminates on:
Specific requirements —
Part 1AB:
Station and media access control
connectivity discovery
AMENDMENT 2: Support for multiframe
protocol data units
Technologies de l'information — Télécommunications et échange
d'information entre systèmes — Réseaux locaux et métropolitains —
Exigences spécifiques —
Partie 1AB: Découverte de connectivité des stations et du contrôle
d'accès aux supports
AMENDEMENT 2
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
FAST TRACK PROCEDURE
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/IEC/IEEE 8802­1AB:2017/FDAM
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
2:2023(E)
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii © IEEE 2022
  © ISO/IEC 2023 – All rights reserved
NATIONAL REGULATIONS.
© IEEE 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for
the different types of ISO/IEC documents should be noted. This document was drafted in accordance
with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details
of any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC list of patent
declarations received (see https://patents.iec.ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),
see www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.
ISO/IEC/IEEE 8802-1AB:2017/Amd.2 was prepared by the LAN/MAN of the IEEE Computer Society (as
IEEE 802.1ABdh-2021) and drafted in accordance with its editorial rules. It was adopted, under the “fast-
track procedure” defined in the Partner Standards Development Organization cooperation agreement
between ISO and IEEE, by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 6, Telecommunications and information exchange between systems.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.
© IEEE 2022 – All rights reserved iii

---------------------- Page: 3 ----------------------
,(((6WG$%GKŒ
$PHQGPHQWWR,(((6WG$%Œ
DVDPHQGHGE\,(((6WG$%FXŒ
,(((6WDQGDUGIRU
/RFDODQGPHWURSROLWDQDUHDQHWZRUNV²
6WDWLRQDQG0HGLD$FFHVV&RQWURO
&RQQHFWLYLW\'LVFRYHU\
$PHQGPHQW6XSSRUWIRU0XOWLIUDPH
3URWRFRO'DWD8QLWV
'HYHORSHGE\WKH
/$10$16WDQGDUGV&RPPLWWHH
RIWKH
,(((&RPSXWHU6RFLHW\
$SSURYHG'HFHPEHU
,(((6$6WDQGDUGV%RDUG

---------------------- Page: 4 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
$EVWUDFW7KLVDPHQGPHQWWR,(((6WG$%ŒVSHFLILHVSURWRFROVSURFHGXUHVDQG
PDQDJHGREMHFWVWKDWVXSSRUWWKHWUDQVPLVVLRQDQGUHFHSWLRQRIDVHWRI/LQN/D\HU'LVFRYHU\
3URWRFRO//'37\SH/HQJWK9DOXHV7/9VWKDWH[FHHGWKHVSDFHDYDLODEOHLQDVLQJOHIUDPH
Š
.H\ZRUGV ,(((  ,((($%Œ ,((( $%GKŒOLQN OD\HUGLVFRYHU\SURWRFRO
PDQDJHPHQWLQIRUPDWLRQEDVHPXOWLIUDPH//'3'8VWRSRORJ\GLVFRYHU\WRSRORJ\LQIRUPDWLRQ
7KH,QVWLWXWHRI(OHFWULFDODQG(OHFWURQLFV(QJLQHHUV,QF
3DUN$YHQXH1HZ &RS\ULJKW‹E\7KH,QVWLWXWHRI(OHFWULFDODQG(OHFWURQLFV(QJLQHHUV,QF
$OOULJKWVUHVHUYHG3XEOLVKHG$SULO3ULQWHGLQWKH8QLWHG6WDWHVRI$PHULFD
,(((DQGDUHUHJLVWHUHGWUDGHPDUNVLQWKH863DWHQW 7UDGHPDUN2IILFHRZQHGE\7KH,QVWLWXWHRI(OHFWULFDODQG
(OHFWURQLFV(QJLQHHUV,QFRUSRUDWHG
3'),6%167'
3ULQW,6%167'3'
IEEE prohibits discrimination, harassment and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior
written permission of the publisher.

---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
,PSRUWDQW1RWLFHVDQG'LVFODLPHUV&RQFHUQLQJ,(((6WDQGDUGV
'RFXPHQWV
,(((6WDQGDUGVGRFXPHQWVDUHPDGHDYDLODEOHIRUXVHVXEMHFWWRLPSRUWDQWQRWLFHVDQGOHJDOGLVFODLPHUV
7KHVHQRWLFHVDQGGLVFODLPHUVRUDUHIHUHQFHWRWKLVSDJHKWWSVVWDQGDUGVLHHHRUJLSUGLVFODLPHUVKWPO
DSSHDULQDOOVWDQGDUGVDQGPD\EHIRXQGXQGHUWKHKHDGLQJ³,PSRUWDQW1RWLFHVDQG'LVFODLPHUV&RQFHUQLQJ
,(((6WDQGDUGV'RFXPHQWV´
1RWLFHDQG'LVFODLPHURI/LDELOLW\&RQFHUQLQJWKH8VHRI,(((6WDQGDUGV
'RFXPHQWV
,(((6WDQGDUGVGRFXPHQWVDUHGHYHORSHGZLWKLQWKH,(((6RFLHWLHVDQGWKH6WDQGDUGV&RRUGLQDWLQJ
&RPPLWWHHVRIWKH,(((6WDQGDUGV$VVRFLDWLRQ,(((6$6WDQGDUGV%RDUG,(((GHYHORSVLWVVWDQGDUGV
WKURXJKDQDFFUHGLWHGFRQVHQVXVGHYHORSPHQWSURFHVVZKLFKEULQJVWRJHWKHUYROXQWHHUVUHSUHVHQWLQJYDULHG
YLHZSRLQWV DQG LQWHUHVWV WR DFKLHYH WKH ILQDO SURGXFW ,((( 6WDQGDUGV DUH GRFXPHQWV GHYHORSHG E\
YROXQWHHUVZLWKVFLHQWLILFDFDGHPLFDQGLQGXVWU\EDVHGH[SHUWLVHLQWHFKQLFDOZRUNLQJJURXSV9ROXQWHHUV
DUHQRWQHFHVVDULO\PHPEHUVRI,(((RU,(((6$DQGSDUWLFLSDWHZLWKRXWFRPSHQVDWLRQIURP,(((:KLOH
,(((DGPLQLVWHUVWKHSURFHVVDQGHVWDEOLVKHVUXOHVWRSURPRWHIDLUQHVVLQWKHFRQVHQVXVGHYHORSPHQW
SURFHVV,(((GRHVQRWLQGHSHQGHQWO\HYDOXDWHWHVWRUYHULI\WKHDFFXUDF\RIDQ\RIWKHLQIRUPDWLRQRUWKH
VRXQGQHVVRIDQ\MXGJPHQWVFRQWDLQHGLQLWVVWDQGDUGV
,((( PDNHV QR ZDUUDQWLHV RU UHSUHVHQWDWLRQV FRQFHUQLQJ LWV VWDQGDUGV DQG H[SUHVVO\ GLVFODLPV DOO
ZDUUDQWLHVH[SUHVVRULPSOLHGFRQFHUQLQJWKLVVWDQGDUGLQFOXGLQJEXWQRWOLPLWHGWRWKHZDUUDQWLHVRI
PHUFKDQWDELOLW\ILWQHVVIRUDSDUWLFXODUSXUSRVHDQGQRQLQIULQJHPHQW,QDGGLWLRQ,(((GRHVQRWZDUUDQWRU
UHSUHVHQWWKDWWKHXVHRIWKHPDWHULDOFRQWDLQHGLQLWVVWDQGDUGVLVIUHHIURPSDWHQWLQIULQJHPHQW,(((
VWDQGDUGVGRFXPHQWVDUHVXSSOLHG³$6,6´DQG³:,7+$//)$8/76´
8VHRIDQ,(((VWDQGDUGLVZKROO\YROXQWDU\7KHH[LVWHQFHRIDQ,(((6WDQGDUGGRHVQRWLPSO\WKDWWKHUH
DUHQRRWKHUZD\VWRSURGXFHWHVWPHDVXUHSXUFKDVHPDUNHWRUSURYLGHRWKHUJRRGVDQGVHUYLFHVUHODWHGWR
WKHVFRSHRIWKH,(((VWDQGDUG)XUWKHUPRUHWKHYLHZSRLQWH[SUHVVHGDWWKHWLPHDVWDQGDUGLVDSSURYHGDQG
LVVXHGLVVXEMHFWWRFKDQJHEURXJKWDERXWWKURXJKGHYHORSPHQWVLQWKHVWDWHRIWKHDUWDQGFRPPHQWV
UHFHLYHGIURPXVHUVRIWKHVWDQGDUG
,QSXEOLVKLQJDQGPDNLQJLWVVWDQGDUGVDYDLODEOH,(((LVQRWVXJJHVWLQJRUUHQGHULQJSURIHVVLRQDORURWKHU
VHUYLFHVIRURURQEHKDOIRIDQ\SHUVRQRUHQWLW\QRULV,(((XQGHUWDNLQJWRSHUIRUPDQ\GXW\RZHGE\DQ\
RWKHUSHUVRQRUHQWLW\WRDQRWKHU$Q\SHUVRQXWLOL]LQJDQ\,(((6WDQGDUGVGRFXPHQWVKRXOGUHO\XSRQKLV
RUKHURZQLQGHSHQGHQWMXGJPHQWLQWKHH[HUFLVHRIUHDVRQDEOHFDUHLQDQ\JLYHQFLUFXPVWDQFHVRUDV
DSSURSULDWHVHHNWKHDGYLFHRIDFRPSHWHQWSURIHVVLRQDOLQGHWHUPLQLQJWKHDSSURSULDWHQHVVRIDJLYHQ,(((
VWDQGDUG
,112(9(176+$//,(((%(/,$%/()25$1<',5(&7,1',5(&7,1&,'(17$/63(&,$/
(;(03/$5<25&216(48(17,$/'$0$*(6,1&/8',1*%87127/,0,7('727+(
1(('72352&85(68%67,787(*22'6256(59,&(6/2662)86('$7$25352),76
25%86,1(66,17(55837,21+2:(9(5&$86('$1'21$1<7+(25<2)/,$%,/,7<
:+(7+(5 ,1 &2175$&7 675,&7 /,$%,/,7< 25 7257 ,1&/8',1* 1(*/,*(1&( 25
27+(5:,6($5,6,1*,1$1<:$<2872)7+(38%/,&$7,2186(2)255(/,$1&(
8321$1<67$1'$5'(9(1,)$'9,6('2)7+(3266,%,/,7<2)68&+'$0$*($1'
5(*$5'/(662):+(7+(568&+'$0$*(:$6)25(6(($%/(

&RS\ULJKW‹,((($OOULJKWVUHVHUYHG

---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE is the approved IEEE
standard.
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, nor be relied upon as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that the presenter's views should be considered the personal views of that individual rather than
the formal position of IEEE, IEEE SA, the Standards Committee, or the Working Group.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE or IEEE SA. However, IEEE does not provide interpretations,
consulting information, or advice pertaining to IEEE Standards documents.
Suggestions for changes in documents should be in the form of a proposed change of text, together with
appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is
important that any responses to comments and questions also receive the concurrence of a balance of
interests. For this reason, IEEE and the members of its Societies and Standards Coordinating Committees
are not able to provide an instant response to comments, or questions except in those cases where the matter
has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any
person who would like to participate in evaluating comments or in revisions to an IEEE standard is welcome
to join the relevant IEEE working group. You can indicate interest in a working group using the Interests tab
1
in the Manage Profile & Interests area of the IEEE SA myProject system. An IEEE Account is needed to
access the application.
2
Comments on standards should be submitted using the Contact Us form.
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the
provisions of any IEEE Standards document does not constitute compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Data privacy
Users of IEEE Standards documents should evaluate the standards for considerations of data privacy and
data ownership in the context of assessing and using the standards in compliance with applicable laws and
regulations.
1
Available at: https://development.standards.ieee.org/myproject-web/public/view.html#landing.
2
Available at: https://standards.ieee.org/content/ieee-standards/en/about/contact/index.html.
4
Copyright © 2022 IEEE. All rights reserved.

---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
Photocopies
Subject to payment of the appropriate licensing fees, IEEE will grant users a limited, non-exclusive license
to photocopy portions of any individual standard for company or organizational internal use or individual,
non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; [phone]; https://
www.copyright.com/. Permission to photocopy portions of any individual standard for educational
classroom use can also be obtained through the Copyright Clearance Center.
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
3
through the issuance of amendments, corrigenda, or errata, visit IEEE Xplore or contact IEEE. For more
information about the IEEE SA or IEEE's standards development process, visit the IEEE SA Website.
Errata
4
Errata, if any, for all IEEE standards can be accessed on the IEEE SA Website. Search for standard number
and year of approval to access the web page of the published standard. Errata links are located under the
Additional Resources Details section. Errata are also available in IEEE Xplore. Users are encouraged to
periodically check for errata.
Patents
5
IEEE Standards are developed in compliance with the IEEE SA Patent Policy.
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the
existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has
3
Available at: https://ieeexplore.ieee.org/browse/standards/collection/ieee.
4
Available at: https://standards.ieee.org/standard/index.html.
5
Available at: https://standards.ieee.org/about/sasb/patcom/materials.html.
5
Copyright © 2022 IEEE. All rights reserved.

---------------------- Page: 8 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
ILOHGDVWDWHPHQWRIDVVXUDQFHYLDDQ$FFHSWHG/HWWHURI$VVXUDQFHWKHQWKHVWDWHPHQWLVOLVWHGRQWKH
,(((6$:HEVLWHDWKWWSVVWDQGDUGVLHHHRUJDERXWVDVESDWFRPSDWHQWVKWPO/HWWHUVRI$VVXUDQFHPD\
LQGLFDWH ZKHWKHU WKH6XEPLWWHU LV ZLOOLQJRU XQZLOOLQJ WRJUDQWOLFHQVHVXQGHUSDWHQW ULJKWV ZLWKRXW
FRPSHQVDWLRQRUXQGHUUHDVRQDEOHUDWHVZLWKUHDVRQDEOHWHUPVDQGFRQGLWLRQVWKDWDUHGHPRQVWUDEO\IUHHRI
DQ\XQIDLUGLVFULPLQDWLRQWRDSSOLFDQWVGHVLULQJWRREWDLQVXFKOLFHQVHV
(VVHQWLDO3DWHQW&ODLPVPD\H[LVWIRUZKLFKD/HWWHURI$VVXUDQFHKDVQRWEHHQUHFHLYHG7KH,(((LVQRW
UHVSRQVLEOHIRULGHQWLI\LQJ(VVHQWLDO3DWHQW&ODLPVIRUZKLFKDOLFHQVHPD\EHUHTXLUHGIRUFRQGXFWLQJ
LQTXLULHVLQWRWKHOHJDOYDOLGLW\RUVFRSHRI3DWHQWV&ODLPVRUGHWHUPLQLQJZKHWKHUDQ\OLFHQVLQJWHUPVRU
FRQGLWLRQVSURYLGHGLQFRQQHFWLRQZLWKVXEPLVVLRQRID/HWWHURI$VVXUDQFHLIDQ\RULQDQ\OLFHQVLQJ
DJUHHPHQWV DUH UHDVRQDEOH RU QRQGLVFULPLQDWRU\ 8VHUV RI WKLV VWDQGDUG DUH H[SUHVVO\ DGYLVHG WKDW
GHWHUPLQDWLRQRIWKHYDOLGLW\RIDQ\SDWHQWULJKWVDQGWKHULVNRILQIULQJHPHQWRIVXFKULJKWVLVHQWLUHO\WKHLU
RZQUHVSRQVLELOLW\)XUWKHULQIRUPDWLRQPD\EHREWDLQHGIURPWKH,(((6WDQGDUGV$VVRFLDWLRQ
,03257$17127,&(
,(((6WDQGDUGVGRQRWJXDUDQWHHRUHQVXUHVDIHW\VHFXULW\KHDOWKRUHQYLURQPHQWDOSURWHFWLRQRUHQVXUH
DJDLQVWLQWHUIHUHQFHZLWKRUIURPRWKHUGHYLFHVRUQHWZRUNV,(((6WDQGDUGVGHYHORSPHQWDFWLYLWLHVFRQVLGHU
UHVHDUFK DQG LQIRUPDWLRQ SUHVHQWHG WR WKH VWDQGDUGV GHYHORSPHQW JURXS LQ GHYHORSLQJ DQ\ VDIHW\
UHFRPPHQGDWLRQV 2WKHU LQIRUPDWLRQ DERXW VDIHW\ SUDFWLFHV FKDQJHV LQ WHFKQRORJ\ RU WHFKQRORJ\
LPSOHPHQWDWLRQRULPSDFWE\SHULSKHUDOV\VWHPVDOVRPD\EHSHUWLQHQWWRVDIHW\FRQVLGHUDWLRQVGXULQJ
LPSOHPHQWDWLRQRIWKHVWDQGDUG,PSOHPHQWHUVDQGXVHUVRI,(((6WDQGDUGVGRFXPHQWVDUHUHVSRQVLEOHIRU
GHWHUPLQLQJDQGFRPSO\LQJZLWKDOODSSURSULDWHVDIHW\VHFXULW\HQYLURQPHQWDOKHDOWKDQGLQWHUIHUHQFH
SURWHFWLRQSUDFWLFHVDQGDOODSSOLFDEOHODZVDQGUHJXODWLRQV

&RS\ULJKW‹,((($OOULJKWVUHVHUYHG

---------------------- Page: 9 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
3DUWLFLSDQWV
$WWKHWLPHWKLVDPHQGPHQWZDVVXEPLWWHGWRWKH,(((6$6WDQGDUGV%RDUGIRUDSSURYDOWKH,(((
:RUNLQJ*URXSKDGWKHIROORZLQJPHPEHUVKLS
*OHQQ3DUVRQVChair
-HVV\5RX\HUVice-Chair
-iQRV)DUNDVChair, Time-Sensitive Networking Task Group
&UDLJ*XQWKHUVice-Chair, Time-Sensitive Networking Task Group
6WHSKHQ+DGGRFN Editor
$VWULW$GHPDM $WVXVKL6DWR
5DOI$VVPDQQ 0LFKDHO.DUO
)UDQN6FKHZH
9HQNDW$UXQDUWKL 6WHSKDQ.HKUHU
0LFKDHO6HDPDQ
5XG\%HOOLDUGL 0DUFHO.LHVVOLQJ
0DLN6HHZDOG
5DQG\.HOVH\
&KULVWLDQ%RLJHU
5DPHVK6LYDNROXQGX
3DXO%RWWRUII *DYLQ/DL
-RKDQQHV6SHFKW
5DGKDNULVKQD&DQFKL -DPHV/DZOLV
0DULXV6WDQLFD
)HQJ&KHQ -RDR/RSHV
*XHQWHU6WHLQGO
/LO\/Y
$EKLMLW&KRXGKXU\
/L\DQJ6XQ
3DXO&RQJGRQ &KULVWRSKH0DQJLQ
.DULP7UDRUH
5RGQH\&XPPLQJV 6FRWW0DQVILHOG
0D[7XUQHU
-RVHI'RUU .HQLFKL0DUXKDVKL
%DOD]V9DUJD
+HVKDP(OEDNRXU\ 2ODI0DWHU
*DQHVK9HQNDWHVDQ
$QQD(QJHOPDQQ 'DYLG0F&DOO
7RQJWRQJ:DQJ
7KRPDV(Q]LQJHU /DUU\0F0LOODQ
;LQ\XDQ:DQJ
'RQDOG)HG\N -RKQ0HVVHQJHU
.DUO:HEHU
1RUPDQ)LQQ +LURNL1DNDQR
/HRQ:HVVHOV
*HRIIUH\*DUQHU +LURVKL2KXH
/XGZLJ:LQNHO
$PULW*RSDO 'RQDOG53DQQHOO
-RUGRQ:RRGV
5D]YDQ3HWUH
0DULQD*XWLHUUH]
7DNDKLUR 0DUN+DQWHO 0LFKDHO3RWWV
-HURPH+HQU\ 'LHWHU3URHOO
8ZH=HLHU
0DUF+ROQHVV :HL4LX
'DQLHO+RSI .DUHQ5DQGDOO 1DGHU=HLQ
:RRMXQJ+XK 0D[LPLOLDQ5LHJHO :LOOLDP=KDR
6DWRNR,WD\D 6LOYDQD5RGULJXHV +HOJH=LQQHU
7KHIROORZLQJPHPEHUVRIWKHLQGLYLGXDOEDOORWLQJFRPPLWWHHYRWHGRQWKLVVWDQGDUG%DOORWHUVPD\KDYH
YRWHGIRUDSSURYDOGLVDSSURYDORUDEVWHQWLRQ
7KRPDV$OH[DQGHU /RNHVK.DEUD 'LHWHU3URHOO
+DUU\%LPV 3LRWU.DURFNL $ORQ5HJHY
6WHSKDQ.HKUHU 0D[LPLOLDQ5LHJHO
&KULVWLDQ%RLJHU
5DQG\.HOVH\ -HVV\5RX\HU
9HUQ%UHWKRXU
6WXDUW.HUU\ )UDQN6FKHZH
:LOOLDP%\UG
(YJHQ\.KRURY 0LFKDHO6HDPDQ
3DXO&DUGLQDO
3LQ&KDQJ
+\HRQJ+R/HH :DOWHU6WUXSSOHU
'LHJR&KLR]]L
7LQJ/L 0LWVXWRVKL6XJDZDUD
-iQRV)DUNDV
&KULVWRSKH0DQJLQ %R6XQ
$YUDKDP)UHHGPDQ
6FRWW0DQVILHOG 0D[7XUQHU
&UDLJ*XQWKHU
-RQDWKRQ0FOHQGRQ -RKQ9HUJLV
6WHSKHQ+DGGRFN
6DWRVKL2EDUD 6WHSKHQ:HEE
0DUFR+HUQDQGH]
*OHQQ3DUVRQV .DUO:HEHU
:HUQHU+RHO]O
%DQVL3DWHO 6FRWW:LOO\
2OLYHU+ROODQG
$UXPXJDP3DYHQWKDQ 3UDQDY-KD &OLQWRQ3RZHOO 2UHQ 
&RS\ULJKW‹,((($OOULJKWVUHVHUYHG

---------------------- Page: 10 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
:KHQWKH,(((6$6WDQGDUGV%RDUGDSSURYHGWKLVVWDQGDUGRQ'HFHPEHULWKDGWKHIROORZLQJ
PHPEHUVKLS
*DU\+RIIPDQ Chair
-RQ:DOWHU5RVGDKOVice Chair
-RKQ'.XOLFNPast Chair
.RQVWDQWLQRV.DUDFKDOLRVSecretary
(GZDUG$$GG\ +RZDUG/L 0HKPHW8OHPD
'RXJ(GZDUGV 'DR]KXDQJ/LQ /HL:DQJ
5DP\$KPHG)DWK\ .HYLQ/X ).HLWK:DWHUV
-7UDYLV*ULIILWK 'DOHHS&0RKOD .DUO:HEHU
7KRPDV.RVK\ &KHQKXL1LX 6KD:HL
-RVHSK/.RHSILQJHU
'DPLU1RYRVHO +RZDUG:ROIPDQ
$QQHWWH5HLOO\ 'DLGL=KRQJ
'DYLG-/DZ
'RURWK\6WDQOH\

0HPEHU(PHULWXV

&RS\ULJKW‹,((($OOULJKWVUHVHUYHG

---------------------- Page: 11 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
,QWURGXFWLRQ
7KLVLQWURGXFWLRQLVQRWSDUWRI,(((6WG$%GK,(((6WDQGDUGIRU/RFDODQGPHWURSROLWDQDUHD
QHWZRUNV²6WDWLRQDQG0HGLD$FFHVV&RQWURO&RQQHFWLYLW\'LVFRYHU\²$PHQGPHQW6XSSRUWIRU0XOWLIUDPH
3URWRFRO'DWD8QLWV
7KHILUVWHGLWLRQRI,(((6WG$%ŒZDVSXEOLVKHGLQDQGUHYLVLRQVZHUHSXEOLVKHGLQDQG
$QDPHQGPHQW,(((6WG$%FXŒVSHFLILHVD8QLILHG0RGHOLQJ/DQJXDJH80/EDVHG
LQIRUPDWLRQPRGHODQGD<$1*GDWDPRGHO7KLVDPHQGPHQW,(((6WG$%GKŒVSHFLILHV
SURWRFROVSURFHGXUHVDQGPDQDJHGREMHFWVWKDWVXSSRUWWKHWUDQVPLVVLRQDQGUHFHSWLRQRIDVHWRI/LQN
/D\HU'LVFRYHU\3URWRFRO//'37\SH/HQJWK9DOXHV7/9VWKDWH[FHHGWKHVSDFHDYDLODEOHLQDVLQJOH
IUDPH

&RS\ULJKW‹,((($OOULJKWVUHVHUYHG

---------------------- Page: 12 ----------------------
ISO/IEC/IEEE 8802-1AB:2017/Amd.2:2023(E)
&RQWHQWV
 'HILQLWLRQVDQGQXPHULFDOUHSUHVHQWDWLRQ
 'HILQLWLRQV
 $FURQ\PVDQGDEEUHYLDWLRQV
 &RQIRUPDQFH
 5HTXLUHGFDSDELOLWLHV
 3ULQFLSOHVRIRSHUDWLRQ
 7UDQVPLVVLRQDQGUHFHSWLRQ
 //'3RSHUDWLRQDOPRGHV
 7UDQVPLVVLRQSULQFLSOHV
 5HFHSWLRQSULQFLSOHV
 6\VWHPVZLWKPXOWLSOH//'3$JHQWV
 ([WHQGHG//'3;//'3
 //'3'8WUDQVPLVVLRQUHFHSWLRQDQGDGGUHVVLQJ
 'HVWLQDWLRQDGGUHVV
 6RXUFHDGGUHVV
 //'3'8UHFHSWLRQ
 //'3'8DQG7/9IRUPDWV
 //'3'8IRUPDW
 7/9FDWHJRULHV
 %DVLF7/9IRUPDW
 %DVLFPDQDJHPHQW7/9VHWIRUPDWVDQGGHILQLWLRQV
D ([WHQGHG//'3VHW7/9IRUPDWVDQGGHILQLWLRQV
 2UJDQL]DWLRQDOO\6SHFLILF7/9V
 //'3DJHQWRSHUDWLRQ
 2YHUYLHZ
 6WDWHPDFKLQHV
 //'3PDQDJHPHQW
 7KH//'3PDQDJHPHQWHQWLW\¶VUHVSRQVLELOLWLHV
$QQH[$ QRUPDWLYH 3,&6pURIRUPD 
$ 0DMRUFDSDELOLWLHVDQGRSWLRQV
$QQH['LQIRUPDWLYH %LEOLRJUDSK\

&RS\ULJKW‹,((($OOULJKWVUHVHUYHG

---------------------- Page: 13 ---------------
...