ISO 17546:2016

Space systems — Lithium ion battery for space vehicles — Design and verification requirements

ISO 17546:2016 specifies design and minimum verification requirements for lithium ion rechargeable (including lithium ion polymer) batteries for space vehicles. Lithium ion secondary electrochemical systems use intercalation compounds (intercalated lithium exists in an ionic or quasi-atomic form within the lattice of the electrode material) in the positive and in the negative electrodes. The focus of this International Standard is on "battery assembly" and cell is described as "component cells" to be harmonized with other industrial standards and regulations. "Performance"," safety", and "logistics" are the main points of view to specify. ISO 17546:2016 does not address "disposal" or "recycle"; however, some recommendations regarding disposal are suggested.

Systèmes spatiaux — Batteries à ions lithium pour véhicules spatiaux — Exigences de vérification et de conception

General Information

• Status: Withdrawn
• Publication Date: 08-Mar-2016
• ICS: 49.140 - Space systems and operations
• Technical Committee: ISO/TC 20/SC 14 - Space systems and operations
• Drafting Committee: ISO/TC 20/SC 14 - Space systems and operations
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 19-Feb-2024

Relations

• Revised: ISO 17546:2024 - Space systems — Lithium ion battery for space vehicles — Design and verification requirements
• Effective Date: 06-Jun-2022

Standards Content (Sample)

DRAFT INTERNATIONAL STANDARD
ISO/DIS 17546
ISO/TC 20/SC 14 Secretariat: ANSI
Voting begins on: Voting terminates on:
2014-11-24 2015-02-24
Space systems — Lithium ion battery for space vehicles —
Design and verification requirements
Systèmes spatiaux — Batteries à ions lithium pour véhicules spatiaux — Exigences de vérification et de
conception
ICS: 49.140
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 17546:2014(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2014

---------------------- Page: 1 ----------------------
ISO/DIS 17546:2014(E)

Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as
permitted under the applicable laws of the user’s country, neither this ISO draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/DIS 17546
Contents Page
Foreword . v
Introduction . vi
1 Scope . 1
1.1 Life cycle . 1
1.2 Performance . 2
1.3 Safety . 2
1.4 Logistics . 2
2 Normative references . 2
3 Terms and definitions . 3
4 Symbols (and abbreviated terms) . 7
5 Cell . 8
5.1 Performance . 8
5.1.1 Purpose . 8
5.1.2 Terminology . 8
5.1.3 Requirement for quality assurance . 9
5.1.4 Cell qualification test . 9
5.1.5 Models for analysis . 12
5.2 Safety . 13
5.2.1 Purpose .
...

INTERNATIONAL ISO
STANDARD 17546
First edition
2016-03-01
Space systems — Lithium ion battery
for space vehicles — Design and
verification requirements
Systèmes spatiaux — Batteries à ions lithium pour véhicules spatiaux
— Exigences de vérification et de conception
Reference number
ISO 17546:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO 17546:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 17546:2016(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
1.1 Life cycle . 1
1.2 Performance . 2
1.3 Safety . 2
1.4 Logistics . 3
2 Normative references . 3
3 Terms and definitions . 3
4 Symbols and abbreviated terms . 7
5 Cell . 8
5.1 Performance . 8
5.1.1 Purpose . 8
5.1.2 Terminology . 8
5.1.3 Requirement for quality assurance . 9
5.1.4 Cell qualification test .10
5.1.5 Models for analysis .12
5.2 Safety .12
5.2.1 Purpose .
...